===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/mvme88k.html,v
retrieving revision 1.37
retrieving revision 1.38
diff -c -r1.37 -r1.38
*** www/mvme88k.html	2003/09/16 16:07:33	1.37
--- www/mvme88k.html	2003/11/03 15:03:28	1.38
***************
*** 87,95 ****
  <h3><font color="#0000e0"><strong>Current status:</strong></font></h3>
  
  <p>
! Currently, only the MVME187 board and similar designs are supported, and will
! boot multi-user, supporting most of the on-board devices.  There are still
! a few caveats; depending on your exact hardware setup, your mileage may vary.
  Work is on progress to fix the remaining problems and reliably support more
  boards.
  </p>
--- 87,96 ----
  <h3><font color="#0000e0"><strong>Current status:</strong></font></h3>
  
  <p>
! Currently, only the MVME187 and MVME188 boards, as well as similar designs,
! are booting multi-user, supporting most of the on-board devices.
! There are still a few caveats; depending on your exact hardware setu
! , your mileage may vary.
  Work is on progress to fix the remaining problems and reliably support more
  boards.
  </p>
***************
*** 103,109 ****
  <ul>
    <li>Fix remaining gcc mvme88k code generation bugs when -O2 optimization
        is used.
!   <li>Repair MVME188 and MVME197LE support; finish MVME197SP/DP support.
    <li>Work on unsupported device cards (MVME327, MVME374...).
    <li>Write code for new binutils (and gdb), switch to ELF and, later,
        shared libraries.
--- 104,112 ----
  <ul>
    <li>Fix remaining gcc mvme88k code generation bugs when -O2 optimization
        is used.
!   <li>Support the remaining MVME188 configurations.
!   <li>Improve MVME376 support, which is very flakey.
!   <li>MVME197 support.
    <li>Work on unsupported device cards (MVME327, MVME374...).
    <li>Write code for new binutils (and gdb), switch to ELF and, later,
        shared libraries.
***************
*** 126,131 ****
--- 129,142 ----
  each, SRAM, and on-board ethernet and SCSI controllers, as well as four serial
  ports and one parallel port.<br>
  All the on-board devices are supported, except for the parallel port.
+ <li><strong>MVME188 and MVME188A</strong><br>
+ Contrary to the other MVME processor boards, this board has no on-board
+ devices; it just acts as a container for an <i>HYPERmodule</i> which provides
+ one, two or four 88110 processors, and two or four 88200 (16KB cache) or 88204
+ (64KB cache) CMMUs per processor.<br>
+ Currently, only the following HYPERmodules are supported:
+ 1P32, 1P128, 2P64, 2P256, 4P128, 4P512.<br>
+ External cards specific to the MVME188 family provide memory and serial ports.
  <li><strong>Motorola M8120</strong><br>
  This system is based on an MVME187 with no VMEBus, and is supported as well
  as the regular MVME187.
***************
*** 143,149 ****
    <li>MVME187 on-board Cirrus Logic CL2400 serial ports (tty00-tty03)<br>
  The second set of serial ports found on the M8120 only is currently not
  supported.
! <!--  <li>MVME188 SYSCON DUART serial ports (ttya, ttyb) -->
    </ul>
  <li><strong>Ethernet adapters</strong>
    <ul>
--- 154,160 ----
    <li>MVME187 on-board Cirrus Logic CL2400 serial ports (tty00-tty03)<br>
  The second set of serial ports found on the M8120 only is currently not
  supported.
!   <li>MVME188 SYSCON DUART serial ports (ttya, ttyb)
    </ul>
  <li><strong>Ethernet adapters</strong>
    <ul>
***************
*** 162,170 ****
  
  <p>
  <ul>
!   <li><strong>MVME328</strong>: SCSI controller
!   <li><strong>MVME332</strong>: 8 port serial board
!   <li><strong>MVME376</strong>: VME Lance ethernet
  </ul>
  </p>
  
--- 173,181 ----
  
  <p>
  <ul>
!   <li><strong>MVME328</strong>: SCSI controller (vs)
!   <li><strong>MVME332</strong>: 8 port serial board (vx)
!   <li><strong>MVME376</strong>: VME Lance ethernet (ve)
  </ul>
  </p>
  
***************
*** 179,193 ****
  <li><strong>MVME181</strong><br>
  A stripped-down MVME187 with no on-board devices, except for serial ports.
  <li><strong>MVME188 and MVME188A</strong><br>
! Contrary to the other MVME processor boards, this board has no on-board
! devices; it just acts as a container for an <i>HyperModule</i> which provides
! one, two or four 88110 processors, and two or four 88200 (16KB cache) or 88204
! (64KB cache) CMMUs per processor.<br>
! <!--
! All existing HyperModule models should be supported, but this has only been
! tested so far on 1P64 (1 cpu, 4 cmmu) and 2P256 (2 cpu, 4 cmmu) modules.
! -->
! External cards specific to the MVME188 family provide memory and serial ports.
  <li><strong>MVME197LE</strong><br>
  An entry-level design similar to the MVME187, but based on the 88110 processor
  with integrated MMU and cache controller.
--- 190,197 ----
  <li><strong>MVME181</strong><br>
  A stripped-down MVME187 with no on-board devices, except for serial ports.
  <li><strong>MVME188 and MVME188A</strong><br>
! The following HYPERmodule (with split user/supervisor MMUs) are not supported
! at the moment: 1P64, 1P128, 1P256, 1P512, 2P128, 2P512.<br>
  <li><strong>MVME197LE</strong><br>
  An entry-level design similar to the MVME187, but based on the 88110 processor
  with integrated MMU and cache controller.
***************
*** 204,211 ****
  </font></h3>
  
  <p>
! There is currently no supported OpenBSD/mvme88k release. However,
! snapshots are made available from time to time, in
  <a href="ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/mvme88k">this location</a>
  as well as in a few
  <a href="ftp.html">mirrors</a>.
--- 208,217 ----
  </font></h3>
  
  <p>
! The last OpenBSD/mvme88k release is
! <a href="ftp://ftp.openbsd.org/pub/OpenBSD/3.4/mvme88k/">OpenBSD 3.4</a>, but
! this is not a supported release.<br>
! Snapshots are made available from time to time, in
  <a href="ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/mvme88k">this location</a>
  as well as in a few
  <a href="ftp.html">mirrors</a>.
***************
*** 248,268 ****
          The Regents of the University of California.  All rights reserved.
  Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org
  
! OpenBSD 3.4-beta (GENERIC) #202: Tue Sep  2 20:46:50 GMT 2003
!     miod@arzon:/usr/src/sys/arch/mvme88k/compile/GENERIC
! Model: Motorola MVME187, 33MHz
  real mem  = 67108864
! avail mem = 59142144 (14439 pages)
  using 844 buffers containing 3457024 bytes of memory
! mainbus0 (root) machine type MVME187
! bugtty0 at mainbus0 addr 0xfff45000: bugtty
  pcctwo0 at mainbus0 addr 0xfff00000: rev 0
! clock0 at pcctwo0 ipl 5: VME1x7
! sclock0 at pcctwo0 ipl 5: VME1x7
! memc0 at pcctwo0 offset 0x43000: MEMC040 rev 1
! memc1 at pcctwo0 offset 0x43100: MCECC rev 0
  nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192
  cl0 at pcctwo0 offset 0x45000 ipl 3 console
  vme0 at pcctwo0 offset 0x40000: vector base 0x80, system controller
  vme0: using BUG parameters
  vme0: 1phys 0x04000000-0xefff0000 to VME 0x04000000-0xefff0000
--- 254,275 ----
          The Regents of the University of California.  All rights reserved.
  Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org
  
! OpenBSD 3.4-current (GENERIC) #220: Wed Oct 29 15:14:53 GMT 2003
!     miod@arzon.gentiane.org:/usr/src/sys/arch/mvme88k/compile/GENERIC
  real mem  = 67108864
! avail mem = 59121664 (14435 pages)
  using 844 buffers containing 3457024 bytes of memory
! mainbus0 (root): Motorola MVME187, 33MHz
! cpu0: M88100 rev 0x3, 2 CMMU
! cpu0: M88200 (16K) rev 0x9, global Icache, M88200 (16K) rev 0x9, global Dcache
! bugtty0 at mainbus0 addr 0xfff45000: fallback console
  pcctwo0 at mainbus0 addr 0xfff00000: rev 0
! clock0 at pcctwo0 ipl 5
! memc0 at pcctwo0 offset 0x43000: MCECC rev 0
  nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192
  cl0 at pcctwo0 offset 0x45000 ipl 3 console
+ ssh0 at pcctwo0 offset 0x47000 ipl 2: version 0 target 7
+ scsibus0 at ssh0: 8 targets
  vme0 at pcctwo0 offset 0x40000: vector base 0x80, system controller
  vme0: using BUG parameters
  vme0: 1phys 0x04000000-0xefff0000 to VME 0x04000000-0xefff0000
***************
*** 272,279 ****
  vme0: vme to cpu irq level 1:1
  vmes0 at vme0
  vs0 at vmes0 addr 0xffff9000 vaddr 0x551b000 vec 0x80 ipl 2: target 7
! scsibus0 at vs0: 8 targets
! sd0 at scsibus0 targ 0 lun 0: &lt;COMPAQPC, DCAS-32160, S6CA&gt; SCSI2 0/direct fixed
  sd0: 2006MB, 8188 cyl, 3 head, 167 sec, 512 bytes/sec, 4110000 sec total
  vmel0 at vme0
  ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:21:7c:74
--- 279,286 ----
  vme0: vme to cpu irq level 1:1
  vmes0 at vme0
  vs0 at vmes0 addr 0xffff9000 vaddr 0x551b000 vec 0x80 ipl 2: target 7
! scsibus1 at vs0: 8 targets
! sd0 at scsibus1 targ 0 lun 0: &lt;COMPAQPC, DCAS-32160, S6CA&gt; SCSI2 0/direct fixed
  sd0: 2006MB, 8188 cyl, 3 head, 167 sec, 512 bytes/sec, 4110000 sec total
  vmel0 at vme0
  ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:21:7c:74
***************
*** 306,314 ****
  starting network daemons: sendmail inetd sshd.
  starting local daemons:.
  standard daemons: cron.
! Tue Sep  2 20:50:24 GMT 2003
  
! OpenBSD/mvme88k (arzon) (console)
  
  login:  
  </pre>
--- 313,321 ----
  starting network daemons: sendmail inetd sshd.
  starting local daemons:.
  standard daemons: cron.
! Sat Nov  1 22:58:54 GMT 2003
  
! OpenBSD/mvme88k (arzon.gentiane.org) (console)
  
  login:  
  </pre>
***************
*** 320,326 ****
  <br>
  <small><a href="mailto:www@openbsd.org">www@openbsd.org</a></small>
  <br>
! <small>$OpenBSD: mvme88k.html,v 1.37 2003/09/16 16:07:33 miod Exp $</small>
  
  </body>
  </html>
--- 327,333 ----
  <br>
  <small><a href="mailto:www@openbsd.org">www@openbsd.org</a></small>
  <br>
! <small>$OpenBSD: mvme88k.html,v 1.38 2003/11/03 15:03:28 miod Exp $</small>
  
  </body>
  </html>