===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/mvme88k.html,v
retrieving revision 1.37
retrieving revision 1.38
diff -u -r1.37 -r1.38
--- www/mvme88k.html	2003/09/16 16:07:33	1.37
+++ www/mvme88k.html	2003/11/03 15:03:28	1.38
@@ -87,9 +87,10 @@
 <h3><font color="#0000e0"><strong>Current status:</strong></font></h3>
 
 <p>
-Currently, only the MVME187 board and similar designs are supported, and will
-boot multi-user, supporting most of the on-board devices.  There are still
-a few caveats; depending on your exact hardware setup, your mileage may vary.
+Currently, only the MVME187 and MVME188 boards, as well as similar designs,
+are booting multi-user, supporting most of the on-board devices.
+There are still a few caveats; depending on your exact hardware setu
+, your mileage may vary.
 Work is on progress to fix the remaining problems and reliably support more
 boards.
 </p>
@@ -103,7 +104,9 @@
 <ul>
   <li>Fix remaining gcc mvme88k code generation bugs when -O2 optimization
       is used.
-  <li>Repair MVME188 and MVME197LE support; finish MVME197SP/DP support.
+  <li>Support the remaining MVME188 configurations.
+  <li>Improve MVME376 support, which is very flakey.
+  <li>MVME197 support.
   <li>Work on unsupported device cards (MVME327, MVME374...).
   <li>Write code for new binutils (and gdb), switch to ELF and, later,
       shared libraries.
@@ -126,6 +129,14 @@
 each, SRAM, and on-board ethernet and SCSI controllers, as well as four serial
 ports and one parallel port.<br>
 All the on-board devices are supported, except for the parallel port.
+<li><strong>MVME188 and MVME188A</strong><br>
+Contrary to the other MVME processor boards, this board has no on-board
+devices; it just acts as a container for an <i>HYPERmodule</i> which provides
+one, two or four 88110 processors, and two or four 88200 (16KB cache) or 88204
+(64KB cache) CMMUs per processor.<br>
+Currently, only the following HYPERmodules are supported:
+1P32, 1P128, 2P64, 2P256, 4P128, 4P512.<br>
+External cards specific to the MVME188 family provide memory and serial ports.
 <li><strong>Motorola M8120</strong><br>
 This system is based on an MVME187 with no VMEBus, and is supported as well
 as the regular MVME187.
@@ -143,7 +154,7 @@
   <li>MVME187 on-board Cirrus Logic CL2400 serial ports (tty00-tty03)<br>
 The second set of serial ports found on the M8120 only is currently not
 supported.
-<!--  <li>MVME188 SYSCON DUART serial ports (ttya, ttyb) -->
+  <li>MVME188 SYSCON DUART serial ports (ttya, ttyb)
   </ul>
 <li><strong>Ethernet adapters</strong>
   <ul>
@@ -162,9 +173,9 @@
 
 <p>
 <ul>
-  <li><strong>MVME328</strong>: SCSI controller
-  <li><strong>MVME332</strong>: 8 port serial board
-  <li><strong>MVME376</strong>: VME Lance ethernet
+  <li><strong>MVME328</strong>: SCSI controller (vs)
+  <li><strong>MVME332</strong>: 8 port serial board (vx)
+  <li><strong>MVME376</strong>: VME Lance ethernet (ve)
 </ul>
 </p>
 
@@ -179,15 +190,8 @@
 <li><strong>MVME181</strong><br>
 A stripped-down MVME187 with no on-board devices, except for serial ports.
 <li><strong>MVME188 and MVME188A</strong><br>
-Contrary to the other MVME processor boards, this board has no on-board
-devices; it just acts as a container for an <i>HyperModule</i> which provides
-one, two or four 88110 processors, and two or four 88200 (16KB cache) or 88204
-(64KB cache) CMMUs per processor.<br>
-<!--
-All existing HyperModule models should be supported, but this has only been
-tested so far on 1P64 (1 cpu, 4 cmmu) and 2P256 (2 cpu, 4 cmmu) modules.
--->
-External cards specific to the MVME188 family provide memory and serial ports.
+The following HYPERmodule (with split user/supervisor MMUs) are not supported
+at the moment: 1P64, 1P128, 1P256, 1P512, 2P128, 2P512.<br>
 <li><strong>MVME197LE</strong><br>
 An entry-level design similar to the MVME187, but based on the 88110 processor
 with integrated MMU and cache controller.
@@ -204,8 +208,10 @@
 </font></h3>
 
 <p>
-There is currently no supported OpenBSD/mvme88k release. However,
-snapshots are made available from time to time, in
+The last OpenBSD/mvme88k release is
+<a href="ftp://ftp.openbsd.org/pub/OpenBSD/3.4/mvme88k/">OpenBSD 3.4</a>, but
+this is not a supported release.<br>
+Snapshots are made available from time to time, in
 <a href="ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/mvme88k">this location</a>
 as well as in a few
 <a href="ftp.html">mirrors</a>.
@@ -248,21 +254,22 @@
         The Regents of the University of California.  All rights reserved.
 Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org
 
-OpenBSD 3.4-beta (GENERIC) #202: Tue Sep  2 20:46:50 GMT 2003
-    miod@arzon:/usr/src/sys/arch/mvme88k/compile/GENERIC
-Model: Motorola MVME187, 33MHz
+OpenBSD 3.4-current (GENERIC) #220: Wed Oct 29 15:14:53 GMT 2003
+    miod@arzon.gentiane.org:/usr/src/sys/arch/mvme88k/compile/GENERIC
 real mem  = 67108864
-avail mem = 59142144 (14439 pages)
+avail mem = 59121664 (14435 pages)
 using 844 buffers containing 3457024 bytes of memory
-mainbus0 (root) machine type MVME187
-bugtty0 at mainbus0 addr 0xfff45000: bugtty
+mainbus0 (root): Motorola MVME187, 33MHz
+cpu0: M88100 rev 0x3, 2 CMMU
+cpu0: M88200 (16K) rev 0x9, global Icache, M88200 (16K) rev 0x9, global Dcache
+bugtty0 at mainbus0 addr 0xfff45000: fallback console
 pcctwo0 at mainbus0 addr 0xfff00000: rev 0
-clock0 at pcctwo0 ipl 5: VME1x7
-sclock0 at pcctwo0 ipl 5: VME1x7
-memc0 at pcctwo0 offset 0x43000: MEMC040 rev 1
-memc1 at pcctwo0 offset 0x43100: MCECC rev 0
+clock0 at pcctwo0 ipl 5
+memc0 at pcctwo0 offset 0x43000: MCECC rev 0
 nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192
 cl0 at pcctwo0 offset 0x45000 ipl 3 console
+ssh0 at pcctwo0 offset 0x47000 ipl 2: version 0 target 7
+scsibus0 at ssh0: 8 targets
 vme0 at pcctwo0 offset 0x40000: vector base 0x80, system controller
 vme0: using BUG parameters
 vme0: 1phys 0x04000000-0xefff0000 to VME 0x04000000-0xefff0000
@@ -272,8 +279,8 @@
 vme0: vme to cpu irq level 1:1
 vmes0 at vme0
 vs0 at vmes0 addr 0xffff9000 vaddr 0x551b000 vec 0x80 ipl 2: target 7
-scsibus0 at vs0: 8 targets
-sd0 at scsibus0 targ 0 lun 0: &lt;COMPAQPC, DCAS-32160, S6CA&gt; SCSI2 0/direct fixed
+scsibus1 at vs0: 8 targets
+sd0 at scsibus1 targ 0 lun 0: &lt;COMPAQPC, DCAS-32160, S6CA&gt; SCSI2 0/direct fixed
 sd0: 2006MB, 8188 cyl, 3 head, 167 sec, 512 bytes/sec, 4110000 sec total
 vmel0 at vme0
 ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:21:7c:74
@@ -306,9 +313,9 @@
 starting network daemons: sendmail inetd sshd.
 starting local daemons:.
 standard daemons: cron.
-Tue Sep  2 20:50:24 GMT 2003
+Sat Nov  1 22:58:54 GMT 2003
 
-OpenBSD/mvme88k (arzon) (console)
+OpenBSD/mvme88k (arzon.gentiane.org) (console)
 
 login:  
 </pre>
@@ -320,7 +327,7 @@
 <br>
 <small><a href="mailto:www@openbsd.org">www@openbsd.org</a></small>
 <br>
-<small>$OpenBSD: mvme88k.html,v 1.37 2003/09/16 16:07:33 miod Exp $</small>
+<small>$OpenBSD: mvme88k.html,v 1.38 2003/11/03 15:03:28 miod Exp $</small>
 
 </body>
 </html>