=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/mvme88k.html,v retrieving revision 1.32 retrieving revision 1.33 diff -u -r1.32 -r1.33 --- www/mvme88k.html 2003/08/05 13:53:02 1.32 +++ www/mvme88k.html 2003/08/10 21:20:15 1.33 @@ -69,7 +69,6 @@ egcs revealed a lot of problems in the mvme88k support in gcc, which could not be fixed in time for mvme88k to be a supported OpenBSD 2.5 release. -As of today, these problems are still not entirely fixed.

@@ -85,10 +84,9 @@

Current status:

-Recent work on the toolchain eventually produced a working compiler, as long -as optimization is not enabled; work is in progress towards getting reliable -optimization as well. Unfortunately, numerous kernel stability problems make -this effort progress very slowly at the moment. +Recent work on the toolchain eventually produced a working compiler, although +optimization is not yet totally reliable. Unfortunately, a few kernel bugs +prevent the system from being very stable at the moment.


@@ -98,10 +96,9 @@

@@ -171,6 +157,31 @@

+

+

Unsupported processor boards

+

+ +

+Although these boards have been more or less supported in the past, their +support is currently non-functional in the latest snapshot. +

+

+

@@ -178,21 +189,16 @@

-Due to the compiler problems, no snapshots have been generated since a long -time. There was a 2.4-current snapshot on the ftp mirrors for some time, which -supports only MVME187 cards and can be used as a very crude basis to rebuild -a complete system, for the adventurous hacker. If you want to get it, ask -miod. Access to an -OpenBSD/mvme68k system greatly helps, as both -systems are very similar. +Snapshots are made available from time to time, in +this location +as well as in a few +mirrors. +Here are the + +OpenBSD/mvme88k snapshot installation instructions + as well.

- -

-Due to the recent toolchain improvements, a new snapshot is expected soon. -Stay tuned! -

-

Hardware details:

@@ -217,46 +223,78 @@

-This is a dmesg of an MVME188 system. +This is a boot log of an MVME187 system.

-Model: Motorola MVME188 25Mhz
-MVME188 board configuration #5: 2 CPUs 4 CMMUs
-CPU0 is attached with 2 MC88204 CMMUs
-CPU1 is attached with 2 MC88204 CMMUs
+MVME187 board configuration #A: 1 CPUs 2 CMMUs
+CPU0 is attached with 2 MC88200 CMMUs
 CPU0 is master CPU
-[ using 146999 bytes of bsd a.out symbol table ]
-ddb enabled
+[ using 163088 bytes of bsd a.out symbol table ]
 Copyright (c) 1982, 1986, 1989, 1991, 1993
-	The Regents of the University of California.  All rights reserved.
-Copyright (c) 1995-2001 OpenBSD. All rights reserved.  http://www.OpenBSD.org
+        The Regents of the University of California.  All rights reserved.
+Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org
 
-OpenBSD 2.9-current (GENERIC) #59: Thu Jun 14 01:18:03 GMT 2001
-    miod@arzon:/src/current/src/sys/arch/mvme88k/compile/GENERIC
-real mem  = 33550336
-avail mem = 28381184 (6929 pages)
-using 435 buffers containing 1781760 bytes of memory
-mainbus0 (root) machine type MVME188
+OpenBSD 3.3-current (GENERIC) #86: Sun Aug 10 03:49:48 GMT 2003
+    miod@arzon:/usr/src/sys/arch/mvme88k/compile/GENERIC
+Model: Motorola MVME187, 33MHz
+real mem  = 67108864
+avail mem = 59138048 (14438 pages)
+using 844 buffers containing 3457024 bytes of memory
+mainbus0 (root) machine type MVME187
 bugtty0 at mainbus0 addr 0xfff45000: bugtty
-syscon0 at mainbus0 addr 0xfff00000: rev 1
-clock0 at syscon0 ipl 5: VME188
-sclock0 at syscon0 ipl 5: VME188
-nvram0 at syscon0 offset 0x80000: MK48T02 len 2048
-dart0 at syscon0 offset 0x82000 ipl 3 console (ttya) 
-vme0 at syscon0 offset 0x85000: system controller
+pcctwo0 at mainbus0 addr 0xfff00000: rev 0
+clock0 at pcctwo0 ipl 5: VME1x7
+sclock0 at pcctwo0 ipl 5: VME1x7
+memc0 at pcctwo0 offset 0x43000: MEMC040 rev 1
+memc1 at pcctwo0 offset 0x43100: MCECC rev 0
+nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192
+cl0 at pcctwo0 offset 0x45000 ipl 3 console
+vme0 at pcctwo0 offset 0x40000: vector base 0x80, system controller
+vme0: using BUG parameters
+vme0: 1phys 0x04000000-0xefff0000 to VME 0x04000000-0xefff0000
+vme0: 2phys 0xff000000-0xff7f0000 to VME 0xff000000-0xff7f0000
+vme0: 3phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000
+vme0: 4phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000
+vme0: vme to cpu irq level 1:1
 vmes0 at vme0
-vs0 at vmes0 addr 0xffff9000 vaddr 0x2e59000 vec 0x80 ipl 2: target 7
+vs0 at vmes0 addr 0xffff9000 vaddr 0x551b000 vec 0x80 ipl 2: target 7
 scsibus0 at vs0: 8 targets
-sd0 at scsibus0 targ 1 lun 0: <FUJITSU, M2624F-512, M405> SCSI1 0/direct fixed
-sd0: 496MB, 1429 cyl, 11 head, 64 sec, 512 bytes/sec, 1015812 sec total
-vs1 at vmes0 addr 0xffff9800 vaddr 0x2e5a800 vec 0x82 ipl 2: target 7
-scsibus1 at vs1: 8 targets
-ve0 at vmes0 addr 0xffff1200 vaddr 0x2e5b200 vec 0x74 ipl 1
-ve0: address 00:00:77:83:9f:cc
-ve0: 128 receive buffers, 32 transmit buffers
+sd0 at scsibus0 targ 0 lun 0: <COMPAQPC, DCAS-32160, S6CA> SCSI2 0/direct fixed
+sd0: 2006MB, 8188 cyl, 3 head, 167 sec, 512 bytes/sec, 4110000 sec total
 vmel0 at vme0
+ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:21:7c:74
 boot device: sd0
 root on sd0a
 rootdev=0x400 rrootdev=0x800 rawdev=0x802
+Automatic boot in progress: starting file system checks.
+/dev/rsd0a: file system is clean; not checking
+/dev/rsd0d: file system is clean; not checking
+/dev/rsd0e: file system is clean; not checking
+/dev/rsd0f: file system is clean; not checking
+/dev/rsd0g: file system is clean; not checking
+/dev/rsd0h: file system is clean; not checking
+/dev/rsd0i: file system is clean; not checking
+setting tty flags
+ddb.console: 0 -> 1
+kern.splassert: 0 -> 2
+starting network
+add net default: gateway odyssee
+starting system logger
+starting rpc daemons: portmap ypbind rdate timed.
+savecore: no core dump
+checking quotas: done.
+building ps databases: kvm dev.
+clearing /tmp
+starting pre-securelevel daemons:.
+setting kernel security level: kern.securelevel: 0 -> 1
+creating runtime link editor directory cache.
+starting network daemons: inetd sshd.
+starting local daemons:.
+standard daemons: cron.
+Sun Aug 10 20:22:04 GMT 2003
+
+OpenBSD/mvme88k (arzon) (console)
+
+login:  
 

@@ -266,7 +304,7 @@
www@openbsd.org
-$OpenBSD: mvme88k.html,v 1.32 2003/08/05 13:53:02 miod Exp $ +$OpenBSD: mvme88k.html,v 1.33 2003/08/10 21:20:15 miod Exp $