version 1.1015, 2006/07/10 20:47:53 |
version 1.1016, 2006/07/10 20:50:22 |
|
|
<li>Add support for timedelta sensors in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ntpd&sektion=8&format=html">ntpd(8)</a>. Only <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=udcf&sektion=4&format=html">udcf(4)</a> at the moment. |
<li>Add support for timedelta sensors in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ntpd&sektion=8&format=html">ntpd(8)</a>. Only <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=udcf&sektion=4&format=html">udcf(4)</a> at the moment. |
<li>Enable optional handling of the u-area in pmap if defined. Currently used only on xscale arm. |
<li>Enable optional handling of the u-area in pmap if defined. Currently used only on xscale arm. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ntpd&sektion=8&format=html">ntpd(8)</a>, figure out the refid to send to NTPv3 clients early and store it. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ntpd&sektion=8&format=html">ntpd(8)</a>, figure out the refid to send to NTPv3 clients early and store it. |
<li>Add automatic rate control (AMRR) to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>. |
<li>Add automatic rate control (AMRR) to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>. |
<!-- 2006/05/24 --> |
<!-- 2006/05/24 --> |
<li>Switch <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=diff3&sektion=1&format=html">diff3(1)</a> to use mkstemp(), avoiding possible race conditions. |
<li>Switch <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=diff3&sektion=1&format=html">diff3(1)</a> to use mkstemp(), avoiding possible race conditions. |
<li>Fix to allow alpha kernels to compile with gcc3. |
<li>Fix to allow alpha kernels to compile with gcc3. |
|
|
<!-- 2006/05/23 --> |
<!-- 2006/05/23 --> |
<li>Make sure the kernel compiles without SYSVMSG support. |
<li>Make sure the kernel compiles without SYSVMSG support. |
<li>Have <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=less&sektion=1&format=html">less(1)</a> remove trailing space in filenname completion list. |
<li>Have <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=less&sektion=1&format=html">less(1)</a> remove trailing space in filenname completion list. |
<li>Add code to dissect Vlan Query Protocol in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=tcpdump&sektion=8&format=html">tcpdump(8)</a>. |
<li>Add code to dissect Vlan Query Protocol in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=tcpdump&sektion=8&format=html">tcpdump(8)</a>. |
<li>Allow OpenBGPD to request a route refresh from a neighbor if that neighbor has announced route refresh capabilities. |
<li>Allow OpenBGPD to request a route refresh from a neighbor if that neighbor has announced route refresh capabilities. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pfctl&sektion=8&format=html">pfctl(8)</a>, handle the case when member interface groups have no IP address. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pfctl&sektion=8&format=html">pfctl(8)</a>, handle the case when member interface groups have no IP address. |
<!-- 2006/05/22 --> |
<!-- 2006/05/22 --> |
|
|
<li>Make a copy of the sensor structs in the sysctl code so we don't get a use after free if the sensor is detached while it is being used. |
<li>Make a copy of the sensor structs in the sysctl code so we don't get a use after free if the sensor is detached while it is being used. |
<li>If packets arrive on inactive failover ports in a <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=trunk&sektion=4&format=html">trunk(4)</a> setup, do not increase the error count, just silently drop them. |
<li>If packets arrive on inactive failover ports in a <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=trunk&sektion=4&format=html">trunk(4)</a> setup, do not increase the error count, just silently drop them. |
<li>In the routing code, make sure the kernel doesn't panic if the address familiy is not found in the rt_tables. |
<li>In the routing code, make sure the kernel doesn't panic if the address familiy is not found in the rt_tables. |
<li>Add show all pools command to inkernel ddb, listing all pools like <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=vmstat&sektion=8&format=html">vmstat(8)</a> does. |
<li>Add show all pools command to inkernel ddb, listing all pools like <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=vmstat&sektion=8&format=html">vmstat(8)</a> does. |
<li>In FFS code, make sure we dont mark a mount-point Read-Only if we are about to sync it. |
<li>In FFS code, make sure we dont mark a mount-point Read-Only if we are about to sync it. |
<!-- 2006/05/19 --> |
<!-- 2006/05/19 --> |
<li>Reimplement Enhanced SpeedStep CPU detection code. Makes a number of VIA C7-M and Pentium-M models work. |
<li>Reimplement Enhanced SpeedStep CPU detection code. Makes a number of VIA C7-M and Pentium-M models work. |
|
|
<li>Various fixes for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>. |
<li>Various fixes for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>. |
<!-- 2006/05/16 --> |
<!-- 2006/05/16 --> |
<li>Implemented support for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sppp&sektion=4&format=html">sppp(4)</a> in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ifconfig&sektion=8&format=html">ifconfig(8)</a>. |
<li>Implemented support for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sppp&sektion=4&format=html">sppp(4)</a> in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ifconfig&sektion=8&format=html">ifconfig(8)</a>. |
<li>Add network bootloader for AV400 Aviion systems. |
<li>Add network bootloader for AV400 Aviion systems. |
<li>Add https URL support to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ftp&sektion=1&format=html">ftp(1)</a>. |
<li>Add https URL support to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ftp&sektion=1&format=html">ftp(1)</a>. |
<!-- 2006/05/15 --> |
<!-- 2006/05/15 --> |
<li>Attach 8139s capable of C+ mode to the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=re&sektion=4&format=html">re(4)</a> instead of <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=rl&sektion=4&format=html">rl(4)</a>. |
<li>Attach 8139s capable of C+ mode to the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=re&sektion=4&format=html">re(4)</a> instead of <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=rl&sektion=4&format=html">rl(4)</a>. |
|
|
<li>Add <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=clcs&sektion=4&format=html">clcs(4)</a> to amd64 GENERIC. |
<li>Add <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=clcs&sektion=4&format=html">clcs(4)</a> to amd64 GENERIC. |
<li>Initial import of <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>, a blob-free driver for Intel PRO/Wireless 3945ABG, found in Centrino Duo laptops. |
<li>Initial import of <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wpi&sektion=4&format=html">wpi(4)</a>, a blob-free driver for Intel PRO/Wireless 3945ABG, found in Centrino Duo laptops. |
<li>Let Aviion deal with arbitrary load addresses needed for later boot code. |
<li>Let Aviion deal with arbitrary load addresses needed for later boot code. |
<li>Fix for corrupted graphics when using X.Org on some Intel PCI bridges, which misreport themselves as normal bridges when they are transparent. |
<li>Fix for corrupted graphics when using X.Org on some Intel PCI bridges, which misreport themselves as normal bridges when they are transparent. |
<li>Fix for unwanted int to unsigned short conversions in libcurses. |
<li>Fix for unwanted int to unsigned short conversions in libcurses. |
<li>Add -hex option to the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=openssl&sektion=1&format=html">openssl(1)</a> rand command to produce hexadecimal output. |
<li>Add -hex option to the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=openssl&sektion=1&format=html">openssl(1)</a> rand command to produce hexadecimal output. |
<!-- 2006/05/13 --> |
<!-- 2006/05/13 --> |
|
|
<!-- 2006/05/09 --> |
<!-- 2006/05/09 --> |
<li>Added support for the Aviion platform, a Data General m88k based machine. |
<li>Added support for the Aviion platform, a Data General m88k based machine. |
<li>Enable <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=alipm&sektion=4&format=html">alipm(4)</a> on sparc64 again, and sprinkle some bus_space_barriers around the driver to help debugging it. |
<li>Enable <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=alipm&sektion=4&format=html">alipm(4)</a> on sparc64 again, and sprinkle some bus_space_barriers around the driver to help debugging it. |
<li>Import global ACPI interrupt code to i386 from the amd64 platform. |
<li>Import global ACPI interrupt code to i386 from the amd64 platform. |
<li>Do not allow delay times of 0 in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=systat&sektion=1&format=html">systat(1)</a>. |
<li>Do not allow delay times of 0 in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=systat&sektion=1&format=html">systat(1)</a>. |
<li>On i386, avoid estimating pentium mhz too low, resulting in non-monolithic time. |
<li>On i386, avoid estimating pentium mhz too low, resulting in non-monolithic time. |
<!-- 2006/05/08 --> |
<!-- 2006/05/08 --> |
<li>Add 'link-timeout n' support to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=dhclient&sektion=8&format=html">dhclient(8)</a>. Default remains at 10 seconds. |
<li>Add 'link-timeout n' support to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=dhclient&sektion=8&format=html">dhclient(8)</a>. Default remains at 10 seconds. |
<li>Removed unsafe setjmp/longjmp calls in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=tftpd&sektion=8&format=html">tftpd(8)</a> that were used in signal handlers. |
<li>Removed unsafe setjmp/longjmp calls in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=tftpd&sektion=8&format=html">tftpd(8)</a> that were used in signal handlers. |
<!-- 2006/05/07 --> |
<!-- 2006/05/07 --> |
<li><a href="http://www.openbsd.org/cgi-bin/man.cgi?query=azalia&sektion=4&format=html">azalia(4)</a> audio driver added to i386 and amd64 GENERIC, though commented out. |
<li><a href="http://www.openbsd.org/cgi-bin/man.cgi?query=azalia&sektion=4&format=html">azalia(4)</a> audio driver added to i386 and amd64 GENERIC, though commented out. |
<li>Endian fix for getservbyport(), which wants network byte order. |
<li>Endian fix for getservbyport(), which wants network byte order. |
<li>Add <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bio&sektion=4&format=html">bio(4)</a> framework to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=gdt&sektion=4&format=html">gdt(4)</a>. |
<li>Add <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bio&sektion=4&format=html">bio(4)</a> framework to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=gdt&sektion=4&format=html">gdt(4)</a>. |
<li>Remove the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pool&sektion=9&format=html">pool(9)</a> draining hooks. Probably never used in a meaningful way |
<li>Remove the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pool&sektion=9&format=html">pool(9)</a> draining hooks. Probably never used in a meaningful way |
|
|
<li>On m88k, decide whether we are running a 88100 or 88110 by reading the processor identification register instead of basing it on the MVME board number. |
<li>On m88k, decide whether we are running a 88100 or 88110 by reading the processor identification register instead of basing it on the MVME board number. |
<li>Endian fix for pfsync code. |
<li>Endian fix for pfsync code. |
<li>Fix for pfkey, allowing <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sasyncd&sektion=8&format=html">sasyncd(8)</a> to reliably set up pfkey promiscous mode. |
<li>Fix for pfkey, allowing <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sasyncd&sektion=8&format=html">sasyncd(8)</a> to reliably set up pfkey promiscous mode. |
<li>Some pmap fixes for the m88k platform regarding obio on 88100-based system. |
<li>Some pmap fixes for the m88k platform regarding obio on 88100-based system. |
<!-- 2006/05/05 --> |
<!-- 2006/05/05 --> |
<li>Added various ethernet devices to Alpha GENERIC and RAMDISKBIG kernel images. |
<li>Added various ethernet devices to Alpha GENERIC and RAMDISKBIG kernel images. |
<li>Restore ALTQ support which was lost on <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=de&sektion=4&format=html">de(4)</a>. |
<li>Restore ALTQ support which was lost on <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=de&sektion=4&format=html">de(4)</a>. |
|
|
<li>Add Neterion Xframe-II 10GbE id to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> pcidevs. |
<li>Add Neterion Xframe-II 10GbE id to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> pcidevs. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mg&sektion=1&format=html">mg(1)</a>, have each buffer store their own working directory. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mg&sektion=1&format=html">mg(1)</a>, have each buffer store their own working directory. |
<li>Plug possible memory leak if AMD K7 powernow init fails. |
<li>Plug possible memory leak if AMD K7 powernow init fails. |
<li>Repair creation of subanchors with <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pfctl&sektion=8&format=html">pfctl(8)</a>, and loading of subanchors from file. |
<li>Repair creation of subanchors with <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pfctl&sektion=8&format=html">pfctl(8)</a>, and loading of subanchors from file. |
<!-- 2006/05/01 --> |
<!-- 2006/05/01 --> |
<li>Add Rx/Tx FIFO flush support to Yukon based <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sk&sektion=4&format=html">sk(4)</a> cards. |
<li>Add Rx/Tx FIFO flush support to Yukon based <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sk&sektion=4&format=html">sk(4)</a> cards. |
<li>Fix for broken mpbioses on VT8237 and nForce4 chipsets. This fixes interrupt routing for several integrated devices on those chipsets in GENERIC.MP. |
<li>Fix for broken mpbioses on VT8237 and nForce4 chipsets. This fixes interrupt routing for several integrated devices on those chipsets in GENERIC.MP. |
<li>Increase Tx ring count on <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=nfe&sektion=4&format=html">nfe(4)</a> from 64 to 256. |
<li>Increase Tx ring count on <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=nfe&sektion=4&format=html">nfe(4)</a> from 64 to 256. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pf.conf&sektion=5&format=html">pf.conf(5)</a>, add support for "tagged {}" lists. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pf.conf&sektion=5&format=html">pf.conf(5)</a>, add support for "tagged {}" lists. |
<!-- 2006/04/30 --> |
<!-- 2006/04/30 --> |
<li>Make sure <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=iwi&sektion=4&format=html">iwi(4)</a> get initialized correctly, fixes a firmware panic if the same WEP key is entered multiple times. |
<li>Make sure <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=iwi&sektion=4&format=html">iwi(4)</a> get initialized correctly, fixes a firmware panic if the same WEP key is entered multiple times. |
<li>Initial import of the Neterion Xframe-I 10GigE <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> driver. |
<li>Initial import of the Neterion Xframe-I 10GigE <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=xge&sektion=4&format=html">xge(4)</a> driver. |
|
|
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ipsecctl&sektion=8&format=html">ipsecctl(8)</a>, add support for "local" to ike rules for multihomed machines. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ipsecctl&sektion=8&format=html">ipsecctl(8)</a>, add support for "local" to ike rules for multihomed machines. |
<!-- 2006/04/12 --> |
<!-- 2006/04/12 --> |
<li>Fix signal races in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ping&sektion=8&format=html">ping(8)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ping6&sektion=8&format=html">ping6(8)</a>. |
<li>Fix signal races in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ping&sektion=8&format=html">ping(8)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ping6&sektion=8&format=html">ping6(8)</a>. |
<li>Rewrite attribute changing code to remove+add instead. Fixes "equal attributes encountered" errors in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpd&sektion=8&format=html">bgpd(8)</a>. |
<li>Rewrite attribute changing code to remove+add instead. Fixes "equal attributes encountered" errors in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpd&sektion=8&format=html">bgpd(8)</a>. |
<li>Make rthreads code compile again after header change. |
<li>Make rthreads code compile again after header change. |
<li>Fixes for spl and interrupt counting in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=em&sektion=4&format=html">em(4)</a> when dealing with half-completed work queues. |
<li>Fixes for spl and interrupt counting in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=em&sektion=4&format=html">em(4)</a> when dealing with half-completed work queues. |
<!-- 2006/04/11 --> |
<!-- 2006/04/11 --> |
<li>Fix some memory leaks in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ldconfig&sektion=8&format=html">ldconfig(8)</a>. |
<li>Fix some memory leaks in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ldconfig&sektion=8&format=html">ldconfig(8)</a>. |
<li>In the vlan interface code, make sure we copy the baudrate (link speed) on link state changes from the parent device. |
<li>In the vlan interface code, make sure we copy the baudrate (link speed) on link state changes from the parent device. |
|
|
<li>Revert pci access method for xfree code on amd64 since the /dev/pci could cause problems on some machines. |
<li>Revert pci access method for xfree code on amd64 since the /dev/pci could cause problems on some machines. |
<!-- 2006/04/06 --> |
<!-- 2006/04/06 --> |
<li>Allow lists inside lists in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pf.conf&sektion=5&format=html">pf.conf(5)</a>. |
<li>Allow lists inside lists in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pf.conf&sektion=5&format=html">pf.conf(5)</a>. |
<li>When running emulated binaries, release kernel lock after the exit hook to protect possible free()s. |
<li>When running emulated binaries, release kernel lock after the exit hook to protect possible free()s. |
<li>Fix a process datasize leak in UVM when doing mmap with MAP_FIXED. |
<li>Fix a process datasize leak in UVM when doing mmap with MAP_FIXED. |
<li>Add skeleton driver for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mfi&sektion=4&format=html">mfi(4)</a> MegaRAID SAS cards. |
<li>Add skeleton driver for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mfi&sektion=4&format=html">mfi(4)</a> MegaRAID SAS cards. |
<li>Fixes for floating point state saving in threads code for i386. |
<li>Fixes for floating point state saving in threads code for i386. |
<li>Fix for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpctl&sektion=8&format=html">bgpctl(8)</a> where it would show only the first announced prefix when doing "show rib det source-as #nr". |
<li>Fix for <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpctl&sektion=8&format=html">bgpctl(8)</a> where it would show only the first announced prefix when doing "show rib det source-as #nr". |
|
|
<li>Turn on PCI parity checking on sparc64, and set the PCI latency timer for bus master devices. |
<li>Turn on PCI parity checking on sparc64, and set the PCI latency timer for bus master devices. |
<li>Fix for adb keyboard caps key problem, if remapped to a dead key. |
<li>Fix for adb keyboard caps key problem, if remapped to a dead key. |
<!-- 2006/03/22 --> |
<!-- 2006/03/22 --> |
<li>Fix for broken amd64 mpbios'es on VT8237 and nForce4 chipsets. Fixes interrupt routing for SATA on those when running GENERIC.MP. |
<li>Fix for broken amd64 mpbios'es on VT8237 and nForce4 chipsets. Fixes interrupt routing for SATA on those when running GENERIC.MP. |
<li>Various fixes from the NetBSD coverity runs. |
<li>Various fixes from the NetBSD coverity runs. |
<li>Add support for macros in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ipsec.conf&sektion=5&format=html">ipsec.conf(5)</a>. |
<li>Add support for macros in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ipsec.conf&sektion=5&format=html">ipsec.conf(5)</a>. |
<li>Change the way <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpd&sektion=8&format=html">bgpd(8)</a> selects nexthops. Required for complex setups e.g. where an additional IGP is running. |
<li>Change the way <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=bgpd&sektion=8&format=html">bgpd(8)</a> selects nexthops. Required for complex setups e.g. where an additional IGP is running. |
|
|
<li>Make <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=compress&sektion=1">compress(1)</a>/<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=gzip&sektion=1">gzip(1)</a> work without /dev/stdin and /dev/stdout. |
<li>Make <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=compress&sektion=1">compress(1)</a>/<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=gzip&sektion=1">gzip(1)</a> work without /dev/stdin and /dev/stdout. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ssh&sektion=1">ssh(1)</a>, allow configuration directives to contain spaces, if wrapped in double quotes. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ssh&sektion=1">ssh(1)</a>, allow configuration directives to contain spaces, if wrapped in double quotes. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ssh&sektion=1">ssh(1)</a>, set TCP_NODELAY flag for all connections not just interactive ones - fixes poor network performance and protocol stalls under some network conditions. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ssh&sektion=1">ssh(1)</a>, set TCP_NODELAY flag for all connections not just interactive ones - fixes poor network performance and protocol stalls under some network conditions. |
<li>On the i386, fix userldt handling (consequence of recent i386 W^X changes) which causes a crash if a LDT-using process does an execve(). |
<li>On the i386, fix userldt handling (consequence of recent i386 W^X changes) which causes a crash if a LDT-using process does an execve(). |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mount&sektion=8">mount(8)</a>, add -s flag which skips a mount if the file system is already mounted, handy for MFS partitions. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=mount&sektion=8">mount(8)</a>, add -s flag which skips a mount if the file system is already mounted, handy for MFS partitions. |
<li>Switch from using PCI <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=le&sektion=4">le(4)</a> driver to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pcn&sektion=4">pcn(4)</a>. |
<li>Switch from using PCI <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=le&sektion=4">le(4)</a> driver to <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=pcn&sektion=4">pcn(4)</a>. |
<li>Handle emc6d100 and emc6w201 in the i2c <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=adt&sektion=4">adt(4)</a> driver. |
<li>Handle emc6d100 and emc6w201 in the i2c <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=adt&sektion=4">adt(4)</a> driver. |
|
|
<li>Do underlining in the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=zx&sektion=1&arch=sparc">zx(4)</a> sparc/sparc64 video driver. |
<li>Do underlining in the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=zx&sektion=1&arch=sparc">zx(4)</a> sparc/sparc64 video driver. |
<li>Fix an old bug on ARM-based machines, that would very rarely and very randomly deliver a SIGBUS that was not expected or wanted by anyone. |
<li>Fix an old bug on ARM-based machines, that would very rarely and very randomly deliver a SIGBUS that was not expected or wanted by anyone. |
<li>Display cpu states right away (not delayed) in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=top&sektion=1">top(1)</a>. |
<li>Display cpu states right away (not delayed) in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=top&sektion=1">top(1)</a>. |
<li><a href="http://www.openbsd.org/cgi-bin/man.cgi?query=art&sektion=4">art(4)</a> now works on sparc64 as well. |
<li><a href="http://www.openbsd.org/cgi-bin/man.cgi?query=art&sektion=4">art(4)</a> now works on sparc64 as well. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ami&sektion=4">ami(4)</a>, support a few more re-licensed parts by ACER, FSC, Intel and NEC. |
<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ami&sektion=4">ami(4)</a>, support a few more re-licensed parts by ACER, FSC, Intel and NEC. |
<li>Support Compaq Flash Socket CF 10/100 card in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ne&sektion=4">ne(4)</a>. |
<li>Support Compaq Flash Socket CF 10/100 card in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ne&sektion=4">ne(4)</a>. |
<li>Support National Semiconductor DP83847 DsPHYTER PHY in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=nsphyter&sektion=4">nsphyter(4)</a>. |
<li>Support National Semiconductor DP83847 DsPHYTER PHY in <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=nsphyter&sektion=4">nsphyter(4)</a>. |
|
|
</h3> |
</h3> |
|
|
<hr> |
<hr> |
<a href="index.html"><img height=24 width=24 src="back.gif" border=0 alt="OpenBSD"></a> |
<a href="index.html"><img height=24 width=24 src="back.gif" border=0 alt="OpenBSD"></a> |
<a href="mailto:www@openbsd.org">www@openbsd.org</a> |
<a href="mailto:www@openbsd.org">www@openbsd.org</a> |
<br><small>$OpenBSD$</small> |
<br><small>$OpenBSD$</small> |
|
|