=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v retrieving revision 1.1018 retrieving revision 1.1019 diff -c -r1.1018 -r1.1019 *** www/plus.html 2006/07/15 00:47:19 1.1018 --- www/plus.html 2006/07/19 19:16:16 1.1019 *************** *** 60,68 ****

Support for multichannel (>3) recording on azalia(4).
Fix for mpi(4) when running under VMWare since the VMWare mpi code doesn't fill in all the fields when probed.
Enable mpi(4) on hppa.
Switch i386 and amd64 to use mpi(4) in favor of mpt(4). --- 60,215 ----
- Add major line for wd* on armish, to allow kernels with root on wd0a to work. +
- Allow vax kernel stack tracebacks even when the kernel did not panic. + + +
- Initial PHY driver for IC Plus IP1000A. +
- Make sure little endian platforms without alignment requirements do not split multibyte access on usb. +
- Add support in sshd_config(5) for "Match" keyword, similar to the "Host" directive in ssh_config(5). +
- Add round(3) and roundf(3) from C99 to libm. + +
- Increase the maximum jumbo frame size on stge(4). +
- Make sure pppoe(8) code handle remote error messages not being null terminated. +
- Ensure virtual and profiling interval timers are reset in child process after fork(). +
- Add support for ExitOnForwardFailure to ssh(1) to terminate if we cannot set up all requested dynamic, local and remote port forwardings. +
- Make the UDF mounting code hint the kernel where to find the VAT. +
- Fix for gcc(1) false positives in the -Wbounded warnings for sscanf(3). +
- Only copy the part of environment variable in ssh(1) that we actually use. Prevents ssh(1) from bailing out later on long variables. +
- Hook up hw.product sysctl on macppc. + +
- Remove SpamHaus entry from the spamd.conf(5). +
- Make sure the ELF loader can handle executables with all sections marked read-only. +
- Disable Speedstep and p4tcc setperf mechanisms on SMP systems. +
- Fix potential crash in SOCKS 5 code for ssh(1). + +
- Fix for zero sized remote files in OpenCVS. +
- Make sure fdisk(8) doesn't try to read /usr/mdec/mbr unless the platform actually provides it. +
- Support for 68020-based hp300 machines removed. +
- Some fixes for ne(4) detection, allowing for unplug of a card when the probe gets stuck without panicing. +
- Implement firmware upload to mpi(4). This is the last feature mpt(4) had. + +
- Make sure modification flags are unset if you undo all the way from a loaded buffer in mg(1). +
- Various fixes regarding line counting in mg(1). +
- Add support for ATI IXP300 SATA. + +
- First version of remote code for OpenCVS. Fairly usable, but not recommended for real development yet. +
- Fix for in-kernel ddb hangman so it counts correct guesses right. + +
- Re-sync the em(4) driver to Intels 6.0.5 FreeBSD driver. Previous version included an unrelated change in the I/O which broke it last time. +
- Let mac68k kernels map an empty page at the beginning of the kernel so it can be mapped invalid to catch null pointer references. +
- In pf(4), allow rules to point to alternate routing tables and tag packets matching that rule. +
- Add options to sftp(1) to enable logging of transactions. +
- Add support for arguments to Subsystem commands in sshd_config(5). + +
- Add VAT support in the UDF file system according to UDF 1.50. + +
- Revert em(4) back to previous state. +
- Make sure the libc crypt(3) routine allocates enough space for gsalt. +
- Disable alipm on sparc64 until a spurious bug is found. + +
- Initial version of nmeaattach(8). Attaches a serial line as a source of a timedelta sensor. +
- Sync em(4) driver with Intels latest FreeBSD driver (6.0.5). Adds support for new chipset revisions found on ESB2 and ICH8 core logic chipsets. +
- Back out premature 68060 stuff from mvme68k locore.s. +
- Fix for OpenOSPF where ospfd(8) would redistribute bgpd(8) routes into ospf. + +
- Various fixes for re(4). +
- Let isakmpd(8) send out vendor ID announcing isakmpds release version. +
- Sync systrace(1) to 1.6d. + +
- Enable zyd(4) on i386. +
- Fix channel frequency/flags in radiotap structs. Channel probes now actually cycle 1-14 instead of just sitting at channel 1. +
- Make sure ifconfig(8) also updates the 802.11 address when the user changes the mac address. Replaces old wicontrol(8) -m option. +
- Add support for 5750 C2-based bge(4) cards. + +
- Improvements for the sparc and sparc64 frame buffers. +
- Add -K option to vnconfig(8) which uses a salt file and pkcs5 pbkdf2 to create a more secure key. +
- Make sure ntpd(8) doesn't write anything to the log until it is daemonized. + +
- Remove the mpt(4) now that mpi(4) has replaced it. +
- Change the iostat output in systat(1) to print kilobytes instead of bytes. +
- Make sure the EEPROM reading code on re(4) devices work as expected. +
- Make sure amd64 kernels compile cleanly even if DEBUG is defined. + +
- Fixes for the softupdates queue handling code to avoid endless recursion when forcing worker threads to process worklist items before adding more to the worklist. + +
- In OpenOSPF, track the uptime of the ospfd(8) itself. +
- Add the "nwflag hiddenwid" for hidden SSID mode and "nwflag nobridge" to prevent inter-station communications to ifconfig(8) for 802.11-based devices. +
- In hostapd(8), add new event rules to match optional elements like signal percentage, transmit rate and channel frequency. +
- Remove jumbo frame capabilities from the 5714-based bge(4) devices for now. +
- In systat(1), replace the iostat view to something that actually looks like the ifstat view. +
- Add code to ifconfig(8) to support scanning and node listing for 802.11 devices. Also allow it to print BSSID. + +
- Fix in re(4) for RX path on architectures which require strict alignments and workarounds for reception of jumbo frames. +
- Add support for RealTek 8169SC and 8101E based network cards. +
- Upgrade OpenSSL to 0.9.7j. +
- Add support for RSSI max reporting in RFMD 2958 based atu(4) devices. +
- Pass process credentials to VOP_READ makeing it possible to load firmwares over NFS. +
- Enable mpi(4) on SGI. +
- On sparc64, always skip the offending instruction on a fpu fault. +
- Enable wide targets on FAS366 esp(4) controllers. +
- Add Sun type 7 keyboards to detected usb devices and try to see what country code they have selected.. +
- Have ntpd(8) reset adjtime on startup, otherwise it will overcompensate and produce confusing log entries. + +
- Initial import of bcx(4), driver for Broadcom NetXtreme II gigabit cards for PCI-X and PCIe. Still in development. +
- wicontrol(8) goes away, ifconfig(8) will replace the lost functionality. +
- Enable ne(4) on amd64 platforms. + +
- Allow Xorg to run without privileges when using the wsfb driver. +
- Import support for Promise PDC205xx based SATA controllers. + +
- Set the RSSI max value in ath(4) and add code to allow hostapd(8) and tcpdump(8) to print those values. +
- Let ifconfig print out signal quality for 802.11 devices if those have reported the RSSI max value. +
- Add an optional max_rssi attribute to the 80211com structure so it can be exported to userland. Used to control signal strength. +
- Ext2fs removed from RAMDISKC due to space constraints. +
- Add Promise PDC40518 SATA-II to the list of supported devices. + +
- Endian fixes for sk(4), allows those cards to work on macppc and sparc64. +
- Let ntpd(8) save computed clock drift and use it on next startup. + +
- Add CX4-based hardware to list of supported ixgb(4) devices. +
- Add BCM5703 B0 to the list of supported bge(4) devices. +
- Enable mpi(4) on alpha too. +
- Allow init(8) to accept SIGUSR2 for mandatory powerdowns. +
- Improvements in the UDF file system so it can find virtual partition maps. +
- Add support on sparc64 to power down nicely using the power button on the front panel. +
- Initial code to handle the zyd(4) driver for Zydas ZD1211 802.11 devices. +
- Avoid a race in ntpd(8) by installing SIGCHLD handler before fork(). +
- Add media types for 10GE. +
- Make sure the nmea(4) driver stores the timestamp events early so other events don't overwrite it. + +
- Fix for zaurus suspend problem introduced earlier. +
- Fix memory reporting on 2+ GB alphas. + +
- Added kvm routines for vax platform so "target kvm" works in gdb for kernel crash dumps. +
- Add support for hot spares on mpi(4). + +
- pcn(4) removed from i386 RAMDISKC install image due to size constraints. +
- Improve 802.11b/g interoperability and move towards better compliance with IEEE Std 802.11g-2003. +
- Fix a crash in ext2fs code. +
- On rt2661 and rt2560 based ral(4) cards, enable packet bursting when operating as as STA. +
- Enable udcf(4) on sparc64. +
- Add support for equal-cost multipath IP, enable with sysctls. + +
- Import frequency correction code to ntpd(8). +
- Reenable AMRR on wpi(4). +
- The FFS code will now refuse to mount a filesystem where the number of frags isn't 1,2,4 or 8, instead of panicing later. +
- Make sure mouse and keyboard devices on recent Powerbooks doesn't register twice. +
- Implement carp demotion control for OpenBGPD. Sessions can be configured to modify carp demotion counter for an interface group. +
- Allow udcf(4) to build without clock_subr.c, which means any usb-enabled arch can attach it. +
- Fix for dvmrpd(8) on sparc64 which lets it fetch the interfaces correctly. +
- Fix file descriptor leak in isakmpd(8). !
- Driver for Philips PCA9532 LCD dimmer on ARM-based Thecus. !
- Better logging of refusals and transfers in tftpd(8). !
- Initial import of rum(4), a driver for the next generation Ralink Technology USB 802.11 a/b/g wireless network device. !
- Add rt2573 microcode to ral(4) driver. !
- Add skeleton driver for sparc64 Ultra5 power button. Not useful yet. !
- On wpi(4), load firmware block by block since contiguous memory may not be possible, and fix reassociations. !
- Make sure the privileged child process of dhclient has "/" for working directory so it wont hold locks on directories like /mnt if started from there.
- Support for multichannel (>3) recording on azalia(4). +
- Fix for mpi(4) when running under VMWare since the VMWare mpi code doesn't fill in all the fields when probed.
- Enable mpi(4) on hppa.
- Switch i386 and amd64 to use mpi(4) in favor of mpt(4). *************** *** 180,186 ****
- Add proper bounds checks for the CDP and SSDP protocol parsers in tcpdump(8).
- Add support for i80321 "armish" systems.
- Revert the recent NFS change regarding reserved ports. !
- Add gssapi-with-mic ot PreferredAuthentications on ssh_config(5).
- Implement reliable microtime on i386 smp systems.
- Add support for NVIDIA nForce MCP04 to auich(4). --- 327,333 ----
- Add proper bounds checks for the CDP and SSDP protocol parsers in tcpdump(8).
- Add support for i80321 "armish" systems.
- Revert the recent NFS change regarding reserved ports. !
- Add gssapi-with-mic ot PreferredAuthentications on ssh_config(5).
- Implement reliable microtime on i386 smp systems.
- Add support for NVIDIA nForce MCP04 to auich(4). *************** *** 211,217 ****
- On st(4) devices, always allow ioctl's to work, even if there is no media loaded.
- Fix potential crash in tcpdump(8) when printing ipv6 frags using -v.
- Fix for National variants of the sis(4) cards when switching to allmulti mode. !
- Let dhcpd(8) continue even if an interface lacks a subnet configured in the dhcpd.conf(5), instead that interface will be ignored.
- Add mpi(4), an alternative driver for LSI Logic Fusion MPT controllers, currently supported by mpt(4).
- Rework udcf(4) attach code to create a timedelta sensor immediately, so ntpd(8) doesn't have to check for hotplug events.
- Make libc getcwd(3) use the new __getcwd() system call. --- 358,364 ----
- On st(4) devices, always allow ioctl's to work, even if there is no media loaded.
- Fix potential crash in tcpdump(8) when printing ipv6 frags using -v.
- Fix for National variants of the sis(4) cards when switching to allmulti mode. !
- Let dhcpd(8) continue even if an interface lacks a subnet configured in the dhcpd.conf(5), instead that interface will be ignored.
- Add mpi(4), an alternative driver for LSI Logic Fusion MPT controllers, currently supported by mpt(4).
- Rework udcf(4) attach code to create a timedelta sensor immediately, so ntpd(8) doesn't have to check for hotplug events.
- Make libc getcwd(3) use the new __getcwd() system call. *************** *** 710,716 ****
  www@openbsd.org !
  $OpenBSD: plus.html,v 1.1018 2006/07/15 00:47:19 pvalchev Exp $ --- 857,863 ----
  www@openbsd.org !
  $OpenBSD: plus.html,v 1.1019 2006/07/19 19:16:16 pvalchev Exp $