=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v retrieving revision 1.1032 retrieving revision 1.1033 diff -c -r1.1032 -r1.1033 *** www/plus.html 2006/12/29 06:32:11 1.1032 --- www/plus.html 2007/01/13 02:18:15 1.1033 *************** *** 61,67 **** --- 61,244 ----

Add support for ADT7475 in the adt(4) driver. +
Make sure fxp(4) devices do not re-initialize the card every time the IP address changes. +
Fix for inline x86/x86_64 asm in libstdc++. +
Make sysctl(8) show more digits in timedelta sensors as the timedelta sensors become increasingly more precise. + +
Make tcpdump(8) print icmpv6 inside securit header (AH/ESP). + +
Make non-autonegotiated 10BaseT and 100BaseTX work on msk(4). +
For bnx(4), use the correct size when loading the RX/TX descriptor bus DMA maps. + +
Fix for mg(1) where inserting a file resulted in an incorrect line-number count. +
Add column-number indication to the mg(1) status line. +
Added a two-level sysctl sensor API. + +
For Ultrasparc-III machines, patch some crucial D-cache flush instructions and enable the cache. +
Make sure the kernel only add sensors for NMEA devices if there was no error in nmeaopen(). +
Add special handling in URPF code to handle urpf-failed on carp interfaces. + +
Fix for Core 2 Duo X6800 setperf code where it would report invalid setperf MSR leading to a divide by zero. +
Let hme(4) use the arpcom copy of the ethernet address so that updates to lladdr can work. +
Add Avlab PCI 2S to the list of supported puc(4) devices. +
Eliminate BSMAP #ifdef in mg(1), exposing bsmap-mode which swaps ^H and DEL. +
In ospfd(8), unbreak "redistribute default" and make it possible to specify a metric for the default route as well. +
Plug memory leaks in OpenCVS and OpenRCS code. +
Fix a potential panic in pf_route(). + +
In mg(1), enable auto-complete for the Execute: prompt when using auto-execute. +
Enable recursive interrupts on the armish platform. + +
ACPI code added to various amd64 and i386 install images, though disabled. +
Add rum(4) to amd64 and i386 RAMDISK_CD kernels. +
Hook up acpicpu to the hw.setperf sysctl(8) mechanism, allowing people running ACPI kernels to scale processor and frequency voltage. + +
Make IPv6 input code reject packets from outside with interface-local multicast address in ip6_dst. +
Sync KerberosV code with heimdal. +
Add support for pci-based sti(4) devices on hppa. +
Enable mbg(4) on macppc and sparc64 GENERIC kernels too. +
For sensorsd(8), provide dampening on negative events for sensors that flip due to bugs or erroneous readings, and increase polling frequency accordingly to provide same rate of reporting. +
Activate mbg(4) on i386 GENERIC kernels. + +
For landisk pciide(4), force speed down to PIO mode 4 until some DMA issues are sorted out. +
wscons fixes for accented keys. +
Import of mbg(4), a driver for Meinberg FunkUhren time signal station receivers. Currently, DCF77 PCI32 receiver card is supported. +
Fix index of ERP information element in beacons for rt2560 and rt2661-based devices. + +
Fix for dual port msk(4) cards, now second port is enabled again. +
On hppa platforms, make hil(4) aware of shared interrupts, hil_intr() gets invoked when serial ports interrupt too. +
Update the xenocara XOrg code to X.Org7.2RC3. +
Import of hostated(8) to monitor remote hosts and dynamically alter pf(4) tables and redirection rules. + +
Added acpi code to amd64 and i386 RAMDISK_CD kernels. +
Generic fixes for MII code to allow correct duplex reporting for ethernet drivers. +
Fix for msk(4) when processing status descriptors. Makes Yukon-2 XL Rev A3 devices work. +
Add HP NC373i PCIe Gigcards to the list of supported bnx(4) devices. + +
OpenCVS now can handle Sticky bits on client and server side. +
Removed GEMDOSFS from MS-DOS filesystem code. +
Add esp(4) driver to macppc, supports NCR53c94 SCSI controller found on old world macs. +
Fix for man(1), make sure it closes fp before returning. + +
Fix a minor bug in the TX data queue setup for ath(4) devices. +
Fix for MS-DOS filesystem code where the fs claims to have more clusters than can be represented in the FAT. +
Enable nested interrupts on the Zaurus platform, so interrupts are counted correctly. +
Partial fix for acx(4) regarding broken beacon frames when running in AP mode. + +
For ssh(1), make PermitOpen work with multiple values. +
Added IPv6 passive OS fingerprinting in pf(4) and tcpdump(8). +
Make the bgplg(8) produce valid XHTML1.1 code. +
Add a workaround for hardware ip4csum-tx on re(4) chips, it would be mangled on IP packets less than 28 bytes. +
Make malo(4) work on macppc by adding lots of endian fixes. + +
Make ftp-proxy(8) handle SIGPIPE, fixes a race where ftp-proxy(8) would silently exit. +
In the SCSI layer, add the ability to requeue I/O rejected by a driver using the new NO_CCB result. +
Imported a looking glass for bgpd(8) to be used for CGI web interfaces and so on. See bgplg(8) for usage. +
In the TCP input code, allow RST with th_seq incremented. +
Change sig_atomic_t on alpha from long to int. +
In the ppp(8) code, if the reomte peer rejects our MRU request, but our request is smaller than what the perr accepts, set the MRU anyway. + +
Make OpenCVS permit readonly checkouts using -R or the CVSREADONLYFS env. variable. +
Make "flags 0" disable si(4) and sw(4) DMA on sparc. +
In udcf(4), handle unexpected minute gaps better and restart collecting bits immediately after a parity error. +
In ip6_output(), make sure ia is initialized before use. + +
Add USR5423 to the list of supported zyd(4) devices. +
Sparc and sparc64 wscons rework, and vt100 emulation removal. Saves 16KB on kernels. +
Make spamd(8) take multiple add/delete arguments, thus making it much easier to do bulk add/deletes without opening and locking the database for each one. +
Enable udcf(4) on Zaurus GENERIC kernels. + +
Initial code for a coming ahci(4) driver. +
Switch IPv6 API from RFC2922 to RFC3542. Kernel still handles RFC2922 set/getsockopts so old binaries still work. +
Better check for powernow on AMD K8 and AMD64 cpus. +
In ospfd(8), fix a crash seen on busy area border routers. + +
Fix some channel tweaks in pgt(4). +
Make it possible to set the metric and LSA type for redistributed routes in ospfd(8). +
Cleanups and fixes for axe(4). + +
Fixes for TX DMA on sk(4) and msk(4) devices. +
Add sf(4) to amd64 GENERIC kernels too. +
Enable mesh(4) and mc(4) in macppc GENERIC and RAMDISK kernels. +
Replace Adaptec AIC-6915 sf(4) driver with fully bus_dma(9)-able driver from NetBSD. +
Fix NULL dereference in NFS code, and make sure current buffer is big enough before caching current entry. +
Added Zyxel ZyAIR G-100 to list of supported pgt(4) devices. + +
Add dutch keymap to hppa map listings. +
Implement correct fix for PCI scanning routines for old world macs. +
Imported fixcoff for macppc and made some changes to ofwboot makes it possible to boot OpenBSD on Power Macintosh 9500 and 9600. +
Fix memory leak in isakmpd(8). +
Make sure isakmpd(8) does not leak message structures when unsupported payloads appear or when payload allocation fails. +
Implement TTL security hack in bgpd(8). +
For tcp input code, make the syncache code inherit the TTL from the listening socket when sending the SYN/ACK response. +
Do not install pmtu routes for transport mode SAs. + +
Add Sweex LW053 to the list of supported rum(4) devices. +
Make axe(4) devices avoid unnecessary memcpy() operations in the TX path. +
Report half/full duplex state on bge(4), em(4), ixgb(4) and vge(4) devices. +
For pppoe(4), wrap authname and authke in quotes to prevent problems when using special chars. + +
Added rde_check_route to dvmrp(8), still not complete. +
Fix for sparc colormaps when using cgtwo graphics. +
Fixes for uath(4) regarding detach and firmware RX. +
Make the virtual vmware vic(4) always assume full duplex when up. +
Added Rapid Spanning Tree Protocol support to bridge(4). +
First shot at endian fixing malo(4), still needs work. + +
Fix for sparc64 machines using a frame buffer whose endianness differs from the host CPU. + +
pthread fixes for pipes left in non-blocking mode after being closed. +
Two fixes for compress(1), one for using stdin and destdir not writeable, and the other for having a file called '-'. + +
Make ipsecctl(8) handle multiple SAs with same src/dst but different port. + +
Added some more ZD1211B variants to the list of supported zyd(4) devices. +
In malo(4), enable short slots, should stabilize and increase throughput. +
Add support in XF4 for vesafb to the wsfb driver. Allows unaccelerated and unprivileged X server on i386, with allowaperture=0. +
Remaining bits for ZD1211B support in zyd(4). +
Endian fix in ips(4) firmware handling code. +
Fix for block address calculation in specfs code for devices with blocksize other than 512. +
Enable monitor mode on malo(4) devices. +
Make kernel stack non-swappable. +
Make sure amd64 and i386 only enable acpi if ACPI_ENABLE is defined in the kernel config. + +
Move the isakmpd(8) autogenerated public key into /etc/isakmpd, making it readable for unprivileged uses too. +
Let nmea(4) use tty timestamps if enabled, increases precision and lessens jitter. +
Code added to allow bgpd(8) to work on alternate routing tables. +
Make sure apm code handles the case when acpi steals power management functionality. +
Enable usbf(4) and cdcef(4) on Zaurus RAMDISK kernels so it can be used during install. +
On i386, make sure Enhanced Speedstep and other non-acpi setperf mechanisms are used only if acpi is not attached. +
Make the kernel malloc() print out a warning when returning NULL due to M_CANFAIL. + +
Fixes for DMA TX handling on the ixgb(4) devices. +
Make spamd(8) error out for a greylisted session only after the DATA command, not after the RCPT command. Helps out with sender verification schemes. +
Change the way dhclient sends to a unicast destination IP address. +
Added support for different video modes on cfxga(4) devices. 8-bit modes disabled for now, and default still 640x480x16. +
Added acpi support to i386 and amd64 GENERIC kernels, though disabled. +
Initial import of vesabios for i386. +
Enable kvm86 in the i386 GENERIC kernels. +
Initial import of ips(4), a driver for the IBM ServeRAID controllers. +
Only use the ichpcib speedstep feature if we're running in a (Mobile) Pentium 4, since celerons do not support it. +
Add portugese LK-201 keyboard layout to vax machines. +
First attempt at making kvm86 multiprocessor safe. +
Prevent panics when booting GENERIC.MP with a vesabios kernel. +
Initial bits for ZD1211B support in zyd(4). Untested. +
Enable WEP on malo(4) devices. +
Speed up cfxga(4) by not storing complete bitmaps as a backing store for multiple screens, but remember character cells instead. +
Separate solid fills ops from regurlar raster ops in cfxga(4), brings us accelerated copyrows and copycols. +
Enable uberry(4) on i386 and amd64 GENERIC kernels. +
Make use of the multiple routing tables in the IPv4 and IPv6 input and forward handling code. +
Initial import of uberry(4), for battery charging and powering of the USB Blackberry device. +
For cfxga(4), always update cfxga_scr emulops field when creating a new screen, in case the card was removed and reinserted. +
Fixes for malo(4) reset handling, so ifconfig up/down works on amd64 too. +
Fix the blitter functions on pcmcia based cfxga(4) graphics, providing an accelerated putchar and fix synchronization points. +
Enable mpi(4) on sparc64 GENERIC kernels. +
Reworked the raster ops code for pcmcia based cfxga(4) graphics when monitoring cpu-to-display operation. Much faster that before. +
Enable malo(4) on amd64 GENERIC kernels. +
Silence some dmesg noise on Sun x4100 virtual consoles.
Activate pwdog(4) on i386 and macppc GENERIC kernels.
Added support in the scsi midlayer to handle detached targets better. *************** *** 533,539 ****
www@openbsd.org !
$OpenBSD: plus.html,v 1.1032 2006/12/29 06:32:11 pvalchev Exp $ --- 710,716 ----
www@openbsd.org !
$OpenBSD: plus.html,v 1.1033 2007/01/13 02:18:15 pvalchev Exp $