===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1033
retrieving revision 1.1034
diff -c -r1.1033 -r1.1034
*** www/plus.html 2007/01/13 02:18:15 1.1033
--- www/plus.html 2007/01/19 16:33:46 1.1034
***************
*** 61,67 ****
--- 61,173 ----
+
+ - Fix potential integer overflow in libc printf(3), when passing in very large values for the field width.
+
- Fix for uvm, which should stop crashes in X11 startup seen after activities that exercise memory a lot.
+
+
- Make the scsi layer report SDEV_UMASS devices as non-scsi when asked via SCIOCIDENTIFY. Fixes cdparanoia un USB CD devices.
+
- Make em(4) drivers report flow control status.
+
- Initial import of a power(4) driver for the Landisk platform.
+
- Fix infinite loop in case nip6 and nicmp6 are not on the same mbuf.
+
- Fix for chpass(1) -a handling when given an entry with an already existing user.
+
+
- Shrink memory requirements in OpenCVS when dealing with very large trees.
+
- Make OpenCVS reset sticky tags when using -A.
+
- Fixes for ntpd(8) when using sensor time sources.
+
+
- Add Philips SNU5600 to the list of supported zyd(4) devices.
+
- Various fixes for option handling in dhclient(8) BOOTP and DHCP.
+
- Match some additional devices in the zyd(4) driver.
+
- Make sparc64 vgafb code not attach to Expert3D and Expert3D-Lite cards, these will require a different driver.
+
- Do not keep entire file in memory in OpenCVS when sending or receiving it, fix memory leaks and remote update.
+
+
- Major rework of the RCS api in OpenCVS, resulting in huge speedups and reduced memory usage.
+
- Turn secondary CMMUs data cache on for luna88k to not hog the bus while they spin.
+
- Move kernel virtual address space on sparc64 to make sure it doesn't overlap with physical memory on US3 and US3+ based machines.
+
- Complete binary support for OpenCVS. Adding/importing binary files now works too.
+
- Fix altq(9) support for mc(4) on mac68k
+
- Add a few more video cards to mac68k.
+
- Make user(8) compare against the username, so listing groups when given a numeric user id to userinfo works.
+
+
- Add support for sti(4) on pci to be used as hppa console.
+
- Add callbacks to enable and disable sti(4) rom. Allows dual-sti@pci setups work.
+
- Make acpi assume the first cpu in the table is the boot processor, instead of the cpu with apic id 0.
+
- Merge icmp4 and icmp6 in hoststated(8), and use real asynchronous events for checks.
+
- Rework OpenCVS so it can deal with binary files.
+
- Make FFS correctly deallocate dependencies when growing into an indirect block and failing to acquire a data block.
+
+
- Make OpenCVS validate all options before connecting to the remote server.
+
- Make dhclient(8) reject all packets with an option claiming to extend past the end of an option buffer.
+
- Add flow control support to bge(4)/brgphy(4).
+
- Upgraded BIND to 9.3.3.
+
- Moved bnx(4) microcode to network byte order.
+
- In ipsecctl(8), allow rule if there is at least one matching address family combination.
+
+
- kue(4) microcode moved to network byte order.
+
+
- hostated renamed to hoststated(8). Do not forget to update the passwd file.
+
- When printing bootp option numbers, use unsigned chars in tcpdump(8).
+
- Moved hostated(8) regexp interface to shell globbing rules instead.
+
- Add Gigabyte GN-WI05GS adapters to the list of supported rum(4) devices.
+
- Add support for HW TCP/IP checksum offloading on the nfe(4) adapters that support it.
+
- Allow hostated(8) to use service names in addition to numberical port numbers.
+
- Allow sasyncd(8) to use shared key specification in hex.
+
- Add a generic send/expect check using regexps in hostated(8).
+
- Add support for Leadtek Winfast TV 2000 XP in the bktr(4) driver.
+
+
- Fix for gdb(1) to allow unwinding through sparc64 kernel trap frames.
+
- Rework wscons VT100 emulation code to run in degraded mode if some of the non-vital dynamically allocated elements aren't available.
+
+
- OpenCVS now accepts log messages from external editors.
+
- Stop FFS from printing messages when switching between optimizations for space/time.
+
- Preliminary support for the hp300 single ISA slot found in 4xx "t" models.
+
- Updated bcw(4) for the new network byte order firmware file.
+
+
- Fix for microcode loading so it becomes byte order independent. Will require that people update the microcode files.
+
- Fix two memleaks in hostated.
+
- Make bcw(4) understand combined firmware files, so we can have one instead of 15 files.
+
+
+
- Make bgpd(8) not run rde_shutdown() unless bgpd(8) is started with -d.
+
- Add support for OpenCVS "remove" in a remote setup.
+
- Fix for OpenCVS client logging.
+
- Add a 'g' command to top(1) to only show processes having a certain string in their command name.
+
- Do not leak mbuf tag memory in the an(4), ath(4), atw(4), rtw(4), ipw(4), iwi(4) and wpi(4) drivers either.
+
- Fixes for group handling in adduser(8).
+
- Added support to syslogd(8) for continuous reading of syslog memory buffers.
+
+
- Initial code for bcw(4) firmware upload.
+
- Added better support for IPv6 hostname/numeric representation in the ipsecctl(8) parser.
+
- Fix support for checking out binary files in rcs(1).
+
- Fix keyboard problem for Intel Macs, where only first keypress is seen by boot.
+
- Prevent mbuf tag memory leak on atu(4), ral(4) uath(4) and zyd(4) too, just like rum(4).
+
- When creating an X11/Xorg config, do not force a Mouse section if none was found.
+
+
- Make acpiec(4) be the first device to attach to acpi(4). Some systems require this.
+
- Add support for -s state to OpenCVS.
+
- Make rndc(8) create output files in /var/named/tmp, which is writeable by the 'named' user.
+
+
- Make malo_init() check for firmware loading errors, and reset the card in case of an error, so later malo_init() can work.
+
+
- Fix for mbuf handling on rum(4), fixes mtag memory leaks on armish platform. Same fix applied to acx(4), malo(4) and pgt(4).
+
- Enable jumbo frames on msk(4), except for Yukon-2 FE devices.
+
- Rewrite of eephy(4) code, allows auto MDI/MDI-X on various chipsets.
+
+
- Add flow control to re(4) devices.
+
- Fix for 802.11 WEP key buffer size when using non-standard wep keys >= 104 bits.
+
- Added support for the Meinberg PCI511 and GPS170PCI-based mbg(4) devices.
+
- Remove warnings about illegal prefixlength when a default inet6 route is present in route(8) and netstat(1).
+
+
- Fix another problem with sparc64 US3 D-cache flushing, fixes problems with svnd(4) on such machines.
+
- Add support for ST16C645 com(4) devices.
+
+
- Add MC8755 to the list of supported umsm(4) devices.
+
- A few more D-cache fixes for US3-based sparc64 machines.
+
- Add code to change video mode on the fly for pnozz(4) on the sparc platform.
+
- Switch ARM platforms to new syscall ABI. This is a flag day for binaries from before the middle of November.
+
- Add "C" as command line argument to top(1).
+
- Fixes for exception handling in gcc(1) for alpha.
- Add support for ADT7475 in the adt(4) driver.
- Make sure fxp(4) devices do not re-initialize the card every time the IP address changes.
- Fix for inline x86/x86_64 asm in libstdc++.
***************
*** 119,125 ****
- OpenCVS now can handle Sticky bits on client and server side.
- Removed GEMDOSFS from MS-DOS filesystem code.
!
- Add esp(4) driver to macppc, supports NCR53c94 SCSI controller found on old world macs.
- Fix for man(1), make sure it closes fp before returning.
- Fix a minor bug in the TX data queue setup for ath(4) devices.
--- 225,231 ----
- OpenCVS now can handle Sticky bits on client and server side.
- Removed GEMDOSFS from MS-DOS filesystem code.
!
- Add esp(4) driver to macppc, supports NCR53c94 SCSI controller found on old world macs.
- Fix for man(1), make sure it closes fp before returning.
- Fix a minor bug in the TX data queue setup for ath(4) devices.
***************
*** 141,147 ****
- In the ppp(8) code, if the reomte peer rejects our MRU request, but our request is smaller than what the perr accepts, set the MRU anyway.
- Make OpenCVS permit readonly checkouts using -R or the CVSREADONLYFS env. variable.
!
- Make "flags 0" disable si(4) and sw(4) DMA on sparc.
- In udcf(4), handle unexpected minute gaps better and restart collecting bits immediately after a parity error.
- In ip6_output(), make sure ia is initialized before use.
--- 247,253 ----
- In the ppp(8) code, if the reomte peer rejects our MRU request, but our request is smaller than what the perr accepts, set the MRU anyway.
- Make OpenCVS permit readonly checkouts using -R or the CVSREADONLYFS env. variable.
!
- Make "flags 0" disable si(4) and sw(4) DMA on sparc.
- In udcf(4), handle unexpected minute gaps better and restart collecting bits immediately after a parity error.
- In ip6_output(), make sure ia is initialized before use.
***************
*** 161,167 ****
- Fixes for TX DMA on sk(4) and msk(4) devices.
- Add sf(4) to amd64 GENERIC kernels too.
!
- Enable mesh(4) and mc(4) in macppc GENERIC and RAMDISK kernels.
- Replace Adaptec AIC-6915 sf(4) driver with fully bus_dma(9)-able driver from NetBSD.
- Fix NULL dereference in NFS code, and make sure current buffer is big enough before caching current entry.
- Added Zyxel ZyAIR G-100 to list of supported pgt(4) devices.
--- 267,273 ----
- Fixes for TX DMA on sk(4) and msk(4) devices.
- Add sf(4) to amd64 GENERIC kernels too.
!
- Enable mesh(4) and mc(4) in macppc GENERIC and RAMDISK kernels.
- Replace Adaptec AIC-6915 sf(4) driver with fully bus_dma(9)-able driver from NetBSD.
- Fix NULL dereference in NFS code, and make sure current buffer is big enough before caching current entry.
- Added Zyxel ZyAIR G-100 to list of supported pgt(4) devices.
***************
*** 180,186 ****
- Report half/full duplex state on bge(4), em(4), ixgb(4) and vge(4) devices.
- For pppoe(4), wrap authname and authke in quotes to prevent problems when using special chars.
!
- Added rde_check_route to dvmrp(8), still not complete.
- Fix for sparc colormaps when using cgtwo graphics.
- Fixes for uath(4) regarding detach and firmware RX.
- Make the virtual vmware vic(4) always assume full duplex when up.
--- 286,292 ----
- Report half/full duplex state on bge(4), em(4), ixgb(4) and vge(4) devices.
- For pppoe(4), wrap authname and authke in quotes to prevent problems when using special chars.
!
- Added rde_check_route to dvmrpd(8), still not complete.
- Fix for sparc colormaps when using cgtwo graphics.
- Fixes for uath(4) regarding detach and firmware RX.
- Make the virtual vmware vic(4) always assume full duplex when up.
***************
*** 710,716 ****
www@openbsd.org
!
$OpenBSD: plus.html,v 1.1033 2007/01/13 02:18:15 pvalchev Exp $