===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1146
retrieving revision 1.1147
diff -c -r1.1146 -r1.1147
*** www/plus.html 2009/05/30 23:11:28 1.1146
--- www/plus.html 2009/05/31 03:05:15 1.1147
***************
*** 64,69 ****
--- 64,155 ----
+
+ - For tcpdump(8), add a missing check for truncated dport in the returned UDP header for ICMP_UNREACH_PORT.
+
- Endian fix in em(4) VLAN handling.
+
+
- Make the security(8) script honor the SUIDSKIP variable to exclude paths from setuid and device checks.
+
- Added limited iommu functionality to the SGI xbow XBridge code, allows an IP35 machine with memory after the 2GB boundary to run.
+
- Enabled support in bge(4) for HW TCP/UDP/IP receive checksumming, and IP transmit checksumming.
+
- Added Pantech UM175 to the list of supported umsm(4) devices.
+
+
- BCM57790 is also supported in bge(4) since the last update.
+
- Added D-Link DWA-130 rev D1 to the list of supported otus(4).
+
+
- Added Unitek Y-2240 to the list of supported udl(4) devices.
+
- Imported libxcb 1.2 and xcb-util 0.3.4 into the xenocara tree.
+
+
- Add support for BCM567x, 577x and some new 572x/578x devices in bge(4).
+
- Added ForwardVideo EasyCAP008 and König CMP-USBVGA10 to the list of supported udl(4) devices.
+
+
- Make daily(8) skip ROOTBACKUP when the destination disk device is not configured.
+
- Make sure daemons do not fall back to the user "nobody" if the specific _user is not found.
+
- Add code to sparc and sparc64 to attach mice as wsmouse(4) devices. Allows sparc and sparc64 users to run X without a configuration file. Multihead still needs a minimal configuration file though.
+
- Make ntpd(8) check mode to prevent replying to broadcast and other unwanted ntp packets.
+
- First step towards smtpd(8) configuration reload.
+
+
- Prevent injection of raw 802.11 control frames through bpf(4) on devices that do not explicitly state this capability.
+
- Added Hercules HWNU-300 to the list of supported run(4) devices.
+
+
- Updated xinput to 1.4.2, xf86-input-vmmouse to 12.6.4 and xf86-video-vmware to 10.16.6.
+
- Make sure all users of the routing table index uses a signed type.
+
- Added support for the DisplayLink USB<->DVI Adapter in udl(4).
+
- Fix in gcc for sparc64 for INTMAX_TYPE and UINTMAX_TYPE.
+
- New firmware package for iwn(4), containing a new image for Wifi Link 5150. No change for 4965, 5000, 5100 and 5350-based devices.
+
+
- Rework color handling in cwm(1).
+
- Updated the Mesa GL code to 7.4.2.
+
- Make cwm(1) redraw the border when unhiding a client window.
+
- In bgpd(8), rework most of the RDE to allow multiple RIBs.
+
+
- Initial version of vsw(4), a driver for the virtual network switch on sun4v sparc64s.
+
- Enabled udl(4) on amd64, i386 and sparc64 GENERIC kernels.
+
+
- Enabled udl(4) and wsmux(4) on the armish platform.
+
- Enabled udl(4) and ukbd(4) on the landisk platform.
+
- Fix ospfd(8) route metric for "redistribute default".
+
- Updated the run(4) microcode.
+
- Added Mvix Nubbin MS-811N to the list of supported run(4) devices.
+
+
- Better MBR validation routines.
+
- Added Various GENERIC-IP## and RAMDISK-IP## files to the arch/sgi/conf dir to support the various models.
+
- Different SGI interrupt deadlock prevention using a timeout. Makes Origin 200 run multiuser.
+
- Make SGI boot code compile both 32-bit and 64-bit boot blocks.
+
- Added udl(4) in macppc GENERIC kernels. Disabled by default.
+
- Added cwm(1) configfile commands 'grouponly[1-9]' to select a group and hide all the others.
+
- Avoid loop in the UDF disksort() code.
+
+
- Added support on newer axe(4) devices to set a different MAC address than the one in the EEPROM.
+
+
- Added Adaptec AAR-1225SA to the list of sili(4) devices. Should work.
+
- Make sure pfsync(4) only send frequent updates for TCP connections, the state sync for all the other protocols only have 1-second resolution anyhow.
+
- Added udl(4) to i386 GENERIC kernels, disabled for now.
+
- Switched iwn(4) and wpi(4) over to the MCLGETI buffer allocator.
+
+
- Added support in umsm(4) for Truinstall enabled modems like Sierra 881U.
+
- The daily(8) script now looks for VERBOSESTATUS and if set to 0, no mails will be sent unless there is something to report.
+
- Added a new feature to sysmerge(8) when run in -a mode, to checksum reference files in order to be able to automatically upgrade all unmodified files next time. Also, -S and -X switches are now deprecated.
+
- Add Edimax RT2860-based devices attach to ral(4).
+
- Fix iwi(4) association with APs that refuse non short slot-time capable STAs.
+
- Enabled USB RX stream mode for run(4) devices.
+
- For VT6105M-based vr(4) devices, enable the IP, TCP and UDP checksumming.
+
+
- Enabled vcc(4) and vcctty(4) on sparc64 GENERIC kernels.
+
- Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator" found on the control domain of sun4v systems.
+
- Avoid the expensive mbuf copies on modern vr(4) devices and use a quirk table for device matching.
+
- Better job handling in make(1).
+
+
- Initial udl(4) console device driver for USB displays based on DisplayLink DL-120 / DL-160 display chips.
+
- Rewrite of the daily/weekly/monthly scripts run from cron(8). Weekly and monthly will be more silent now.
+
- Fix xbow devio byteswap on the SGI platform, makes isp(4) happy on IP27 and IP35 machines.
+
+
- Initial code for a port to the ARM7-based omap35xx platform. Not functional yet.
+
- Moved amas(4) to the generic dev/pci source dir and added it to the i386 platform also, still disabled by default on amd64 and i386.
+
+
- Make the default dot.login scripts skip terminal initialization when logging in from an xterm.
+
- Fix for SGI clock interrupt checks, would run at HZ/2 previously.
+
- Make sure ls(1) in -C mode does not ignore the COLUMNS environment variable even if the output filehandle is not a tty.
+
- Initial version of endrun(4), a driver for the EndRun Technologies native time-of-day timedelta sensor.
- Fix for xf86-video-mach64 ATI reference clock for Rage XL and Mobility cards on sparc64 so you can run X without an xorg.conf on machines like Blade100 and the Tadpole laptops.
***************
*** 387,393 ****
www@openbsd.org
!
$OpenBSD: plus.html,v 1.1146 2009/05/30 23:11:28 jj Exp $