=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v retrieving revision 1.1279 retrieving revision 1.1280 diff -c -r1.1279 -r1.1280 *** www/plus.html 2013/04/01 07:13:24 1.1279 --- www/plus.html 2013/04/05 08:17:08 1.1280 *************** *** 74,79 **** --- 74,163 ----

Make setrlimit(2) return EINVAL if rlim_cur > rlim_max, per POSIX. +
Added a default .cvsrc for cvs(1) to /etc/skel. +
Implement nameserver retry/backoff as in the old resolver(3). +
getaddrinfo(3) is now thread-safe. +
Use i2c bit-banging on the SDVO port for intel(4) i915, rather than using buggy GMBUS. Makes more digital video ports (DVI, HDMI) work. +
Unbreak the build on amd64 by making sure that inteldrm pulls in the generic i2c bit-banging code. + +
Put back a space that got lost in fstat(1) state output. +
Do not transfer diverted packets into ipsec(4) processing, let them reach the socket the user has specified in pf.conf(5). +
Revert alpha and ppc to the binutils 2.15 state, to let a binutils 2.17 toolchain produce working binaries. +
Allow "0" as service name for raw sockets in getaddrinfo(3). +
Stopped async_resolver(3) assuming a local nameserver if resolv.conf(5) doesn't exist, and just use /etc/hosts. +
Unbreak drm(4) EDID fetching over displayport. +
Two fixes to drm(4) intel_sdvo_write_cmd(): allocate a large enough buffer to store messages; make sure we return true if we successfully transferred the command. Makes it possible to talk to the SDVO chip on the other end. +
In getent(1), use getaddrinfo() to display multiple addresses including IPv6. +
Prevent some undesirable interactions between using the brightness keys and wsconsctl(8) on the Dell XPS M1330. +
Restrict protocol numbers for raw sockets to the range from 0 to 255. +
Have smtpd(8) temporarily refuse new messages if file system holding the queue has less than 10% of disk space or inodes left. +
Fixed a ftp(1) memory leak during HTTP header parsing. + +
Revert to the old method of intel(4) execbuffer pinning for i915. +
Provide a default softraid(4) discipline interrupt handling function and migrate all of the disciplines that now have the same interrupt code. +
Added function to read the MPCore base address on arm. Allows dynamically determining where e.g. the interrupt controller is. +
Correctly show the scope for IPv6 addresses in getnameinfo(3). +
Stopped the resolver failing in gethostbyname_async() when there are multiple addresses in a DNS packet. +
Prevent race conditions in smtpd(8) db file handling. +
Allow snmpd(8) to be put into read-only mode so that all "set" requests will be rejected. +
Fixed some missing sd_sync check/wakeup after scsi_io_put() calls in softraid(4). +
Fixed building urtwn(4) on the RAMDISK media. + +
Prevent panic during rtsx(4) attachment if a card is inserted while booting and the interrupt handler triggered before sdmmc(4) is attached. +
Let mii_attach() know where the bnx(4) PHY is located (instead of scanning for it) since we know where it will be anyway. +
Switch to the new resolver implementation. +
Enable fmemopen(3), open_memstream(3) and open_wmemstream(3). +
If tmux(1) -s to swap-pane is not given, use the current pane. +
Make tmux(1) copy-mode -u still scroll up if already in copy mode, handy for people who bind it with -n. +
Let the new resolver accept and use any protocol specified by the caller. +
expr(1), csh(1) and ksh(1) will no longer die with SIGFPE on INT_MIN / -1 or % -1. Instead, INT_MIN / -1 == INT_MIN and % -1 == 0. + +
Enable pax(1) support for write_opt=nodir for ustar archives. For tar archive readers that rely on appended "/". +
Added an open_wmemstream(3) implementation and fixed various issues for fmemopen(3) and open_memstream(3). +
Rewritten work unit handling code in the softraid(4) RAID 1/4/5/6 interrupt handlers. Ensures that work units are always removed from the pending queue and that colliders are started, even in the event of an I/O failure. +
Move the tmux(1) cursor back into the last column on CUU/CUD, to match xterm(1) behaviour. +
Make sure the new resolver only uses the search domains for DNS lookups, as the previous resolver did. + +
Short-circuit screen switching on intel(4) i915 if we're switching to the screen that's currently active. +
Stop pci(4) rePOSTing devices supported by inteldrm(4), as the driver now properly restores the graphics mode. +
Added AES-XTS support to aesni crypto(4) driver on amd64. Allows softraid(4) to benefit from the AES-NI instructions on newer Intel CPUs. +
Only accept partial keys if the timer has not expired. Fixes infinite tmux(1) loop when escape is pressed the wrong number of times. + +
During upgrade network setup, print friendlier error message if dhclient(8) is required but missing. +
Avoid null dereference affecting mod_perl, perl(1) RT bug 116441. +
Imported perl(1) 5.16.3 from CPAN. +
Added basic support for multiple screens to rasops(9), use this to provide proper virtual terminals to intel(4) i915. +
Fixed libkvm build on m68k. +
tmux(1) will try to establish client for run-shell and if-shell if no -t. +
Reverted the tmux(1) command-prefix change, which broke sequences of commands. +
Reseed the random(4) pool with the dmesg(8) when more devices are attached. +
Sync ospf6d(8) with ospfd(8): allow two minutes until neighbour adjacencies are formed; for point-to-point interfaces, send lsupdates to the interface address (since there is no DR and multicast messages to the DR will be ignored); improve snapshot handling. +
Create a new context when copying instead of using the (possibly nonexistent) input context. Fixes tmux(1) crash. +
Display the window's column number in the mg(1) mode line, not the column number of the active window. +
Write escaped tmux(1) output in control mode rather than hex. +
Allow tmux(1) to handle empty pending output (and not fail), and add \n. +
When only two panes are in a tmux(1) window, only draw half the separating line as active. +
Don't let tmux(1) display-message crash if no client. +
tmux(1) will now only send end guard if begin was sent. +
Process "^[" as meta when a partial key is found by tmux(1). +
Record when the buffer was saved in the mg(1) undo history. +
Handle "no client" better in tmux(1) display-message. +
Don't zoom windows with one tmux(1) pane. +
Correct line numbers for mg(1) undo-list. +
Added home and end (as modified by xterm) in tmux(1) keypad mode. +
Don't add prefix to tmux(1) %output pane id. +
Fixed tmux(1) if-shell and run-shell if there are no sessions. +
Added time and a command count to tmux(1) control mode guards. +
Fixed handling of short (< 4 character) checksums and a bug with parsing old-style custom tmux(1) layouts. +
Do not redraw tmux(1) panes if invisible. +
Add tmux(1) wait-for -L and -U for lock and unlock. +
Added tmux(1) wait-for command which blocks a client on a named channel until it is woken up again (with wait-for -S). +
Allow lastgc to be NULL in grid_string_cells so tmux(1) find-window doesn't crash. +
Preserve trailing spaces with tmux(1) capture-pane -J. +
Add tmux(1) -q flag to silence errors to capture-pane and show-options. +
Add -a to tmux(1) capture-pane, to capture alternate screen.
Updated drm(4) libdrm to 2.4.42.
Do not let pstat(8) or fstat(1) leak kernel pointers, unless operating as root. *************** *** 261,270 ****
www@openbsd.org !
$OpenBSD: plus.html,v 1.1279 2013/04/01 07:13:24 brett Exp $ - - --- 345,352 ----
www@openbsd.org !
$OpenBSD: plus.html,v 1.1280 2013/04/05 08:17:08 brett Exp $