===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1473
retrieving revision 1.1474
diff -c -r1.1473 -r1.1474
*** www/plus.html 2020/04/25 14:35:00 1.1473
--- www/plus.html 2020/04/30 07:16:31 1.1474
***************
*** 91,96 ****
--- 91,124 ----
+
+ - Mapped em(4) descriptor rings coherent, improving performance on selected ARM64 machines with non-cache-coherent PCIe controllers.
+
- Added i.MX8MM support to dwpcie(4).
+
- Added imxpciephy(4), a driver for the i.MX7D's PCIe PHY, also implemented on the i.MX8MM.
+
+
- Allowed display of TLSv1.3 extension type with openssl(1) -tlsextdebug.
+
- Added bcmbsc(4), a driver for the Broadcom Serial Control (BSC) controller.
+
- Added RTL8821CE and RTL8822CE pci(4) ids.
+
- Added dsxrtc(4), a driver for the Maxim DS3231/DS3232 I2C RTC.
+
- Reduced the minimum allowed number of chunks in a CONCAT volume from 2 to 1, increasing the number of volumes which can be created on a single disk with bioctl(8) from 7 to 15.
+
+
- Increased the default number of audio devices to 4.
+
- Added bcmgpio(4), a driver for the Broadcom BCM283x GPIO controller.
+
+
- Added iked(8) support for switching rdomain on ipsec(4) encryption/decryption, configurable per policy with the new 'rdomain' option in iked.conf(5).
+
- Added support for automatically moving traffic between rdomains on ipsec(4) encryption or decryption, reducing the attack surface for network sidechannel attacks.
+
- Stored local-address by address family in bgpd(8), allowing configuration of both an IPv4 and IPv6 local-address on a group with correct binding of neighbors. Introduced 'no local-address' to reset a previously-set local address back to zero.
+
- Correctly parsed "0/0" as the default route when specifying the classless-[ms-]static-routes options in dhcpd.conf(5).
+
+
- Indicated the marked pane in tmux(1) choose mode in reverse, and added keys to set (m) and clear it (M), and to jump to the starting pane (H).
+
- Added bcmsdhost(4), a driver for the Broadcom "sdhost" SD controller found on the Raspberry Pi.
+
- Allowed tmux(1) main-pane-width and height to be specified as percentages.
+
+
- Added bcmdmac(4), a driver for the DMA controller found on BCM283x SoCs.
+
- Added support for the additional sdhc(4) controller found on the Raspberry Pi.
+
+
- Added a Broadcom BCM2711 pci(4) id.
+
- Prevented mcx(4) interface lockups due to completion queue overflow.
- Added a -groups option to the openssl(1) s_server, allowing EC groups to be configured.
- Added quirks for the sdhc(4) controller on the Raspberry Pi, providing microSD card or WiFi support depending on the firmware configuration.