===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1032
retrieving revision 1.1033
diff -u -r1.1032 -r1.1033
--- www/plus.html 2006/12/29 06:32:11 1.1032
+++ www/plus.html 2007/01/13 02:18:15 1.1033
@@ -61,7 +61,184 @@
+
+- Add support for ADT7475 in the adt(4) driver.
+
- Make sure fxp(4) devices do not re-initialize the card every time the IP address changes.
+
- Fix for inline x86/x86_64 asm in libstdc++.
+
- Make sysctl(8) show more digits in timedelta sensors as the timedelta sensors become increasingly more precise.
+
+
- Make tcpdump(8) print icmpv6 inside securit header (AH/ESP).
+
+
- Make non-autonegotiated 10BaseT and 100BaseTX work on msk(4).
+
- For bnx(4), use the correct size when loading the RX/TX descriptor bus DMA maps.
+
+
- Fix for mg(1) where inserting a file resulted in an incorrect line-number count.
+
- Add column-number indication to the mg(1) status line.
+
- Added a two-level sysctl sensor API.
+
+
- For Ultrasparc-III machines, patch some crucial D-cache flush instructions and enable the cache.
+
- Make sure the kernel only add sensors for NMEA devices if there was no error in nmeaopen().
+
- Add special handling in URPF code to handle urpf-failed on carp interfaces.
+
+
- Fix for Core 2 Duo X6800 setperf code where it would report invalid setperf MSR leading to a divide by zero.
+
- Let hme(4) use the arpcom copy of the ethernet address so that updates to lladdr can work.
+
- Add Avlab PCI 2S to the list of supported puc(4) devices.
+
- Eliminate BSMAP #ifdef in mg(1), exposing bsmap-mode which swaps ^H and DEL.
+
- In ospfd(8), unbreak "redistribute default" and make it possible to specify a metric for the default route as well.
+
- Plug memory leaks in OpenCVS and OpenRCS code.
+
- Fix a potential panic in pf_route().
+
+
- In mg(1), enable auto-complete for the Execute: prompt when using auto-execute.
+
- Enable recursive interrupts on the armish platform.
+
+
- ACPI code added to various amd64 and i386 install images, though disabled.
+
- Add rum(4) to amd64 and i386 RAMDISK_CD kernels.
+
- Hook up acpicpu to the hw.setperf sysctl(8) mechanism, allowing people running ACPI kernels to scale processor and frequency voltage.
+
+
- Make IPv6 input code reject packets from outside with interface-local multicast address in ip6_dst.
+
- Sync KerberosV code with heimdal.
+
- Add support for pci-based sti(4) devices on hppa.
+
- Enable mbg(4) on macppc and sparc64 GENERIC kernels too.
+
- For sensorsd(8), provide dampening on negative events for sensors that flip due to bugs or erroneous readings, and increase polling frequency accordingly to provide same rate of reporting.
+
- Activate mbg(4) on i386 GENERIC kernels.
+
+
- For landisk pciide(4), force speed down to PIO mode 4 until some DMA issues are sorted out.
+
- wscons fixes for accented keys.
+
- Import of mbg(4), a driver for Meinberg FunkUhren time signal station receivers. Currently, DCF77 PCI32 receiver card is supported.
+
- Fix index of ERP information element in beacons for rt2560 and rt2661-based devices.
+
+
- Fix for dual port msk(4) cards, now second port is enabled again.
+
- On hppa platforms, make hil(4) aware of shared interrupts, hil_intr() gets invoked when serial ports interrupt too.
+
- Update the xenocara XOrg code to X.Org7.2RC3.
+
- Import of hostated(8) to monitor remote hosts and dynamically alter pf(4) tables and redirection rules.
+
+
- Added acpi code to amd64 and i386 RAMDISK_CD kernels.
+
- Generic fixes for MII code to allow correct duplex reporting for ethernet drivers.
+
- Fix for msk(4) when processing status descriptors. Makes Yukon-2 XL Rev A3 devices work.
+
- Add HP NC373i PCIe Gigcards to the list of supported bnx(4) devices.
+
+
- OpenCVS now can handle Sticky bits on client and server side.
+
- Removed GEMDOSFS from MS-DOS filesystem code.
+
- Add esp(4) driver to macppc, supports NCR53c94 SCSI controller found on old world macs.
+
- Fix for man(1), make sure it closes fp before returning.
+
+
- Fix a minor bug in the TX data queue setup for ath(4) devices.
+
- Fix for MS-DOS filesystem code where the fs claims to have more clusters than can be represented in the FAT.
+
- Enable nested interrupts on the Zaurus platform, so interrupts are counted correctly.
+
- Partial fix for acx(4) regarding broken beacon frames when running in AP mode.
+
+
- For ssh(1), make PermitOpen work with multiple values.
+
- Added IPv6 passive OS fingerprinting in pf(4) and tcpdump(8).
+
- Make the bgplg(8) produce valid XHTML1.1 code.
+
- Add a workaround for hardware ip4csum-tx on re(4) chips, it would be mangled on IP packets less than 28 bytes.
+
- Make malo(4) work on macppc by adding lots of endian fixes.
+
+
- Make ftp-proxy(8) handle SIGPIPE, fixes a race where ftp-proxy(8) would silently exit.
+
- In the SCSI layer, add the ability to requeue I/O rejected by a driver using the new NO_CCB result.
+
- Imported a looking glass for bgpd(8) to be used for CGI web interfaces and so on. See bgplg(8) for usage.
+
- In the TCP input code, allow RST with th_seq incremented.
+
- Change sig_atomic_t on alpha from long to int.
+
- In the ppp(8) code, if the reomte peer rejects our MRU request, but our request is smaller than what the perr accepts, set the MRU anyway.
+
+
- Make OpenCVS permit readonly checkouts using -R or the CVSREADONLYFS env. variable.
+
- Make "flags 0" disable si(4) and sw(4) DMA on sparc.
+
- In udcf(4), handle unexpected minute gaps better and restart collecting bits immediately after a parity error.
+
- In ip6_output(), make sure ia is initialized before use.
+
+
- Add USR5423 to the list of supported zyd(4) devices.
+
- Sparc and sparc64 wscons rework, and vt100 emulation removal. Saves 16KB on kernels.
+
- Make spamd(8) take multiple add/delete arguments, thus making it much easier to do bulk add/deletes without opening and locking the database for each one.
+
- Enable udcf(4) on Zaurus GENERIC kernels.
+
+
- Initial code for a coming ahci(4) driver.
+
- Switch IPv6 API from RFC2922 to RFC3542. Kernel still handles RFC2922 set/getsockopts so old binaries still work.
+
- Better check for powernow on AMD K8 and AMD64 cpus.
+
- In ospfd(8), fix a crash seen on busy area border routers.
+
+
- Fix some channel tweaks in pgt(4).
+
- Make it possible to set the metric and LSA type for redistributed routes in ospfd(8).
+
- Cleanups and fixes for axe(4).
+
+
- Fixes for TX DMA on sk(4) and msk(4) devices.
+
- Add sf(4) to amd64 GENERIC kernels too.
+
- Enable mesh(4) and mc(4) in macppc GENERIC and RAMDISK kernels.
+
- Replace Adaptec AIC-6915 sf(4) driver with fully bus_dma(9)-able driver from NetBSD.
+
- Fix NULL dereference in NFS code, and make sure current buffer is big enough before caching current entry.
+
- Added Zyxel ZyAIR G-100 to list of supported pgt(4) devices.
+
+
- Add dutch keymap to hppa map listings.
+
- Implement correct fix for PCI scanning routines for old world macs.
+
- Imported fixcoff for macppc and made some changes to ofwboot makes it possible to boot OpenBSD on Power Macintosh 9500 and 9600.
+
- Fix memory leak in isakmpd(8).
+
- Make sure isakmpd(8) does not leak message structures when unsupported payloads appear or when payload allocation fails.
+
- Implement TTL security hack in bgpd(8).
+
- For tcp input code, make the syncache code inherit the TTL from the listening socket when sending the SYN/ACK response.
+
- Do not install pmtu routes for transport mode SAs.
+
+
- Add Sweex LW053 to the list of supported rum(4) devices.
+
- Make axe(4) devices avoid unnecessary memcpy() operations in the TX path.
+
- Report half/full duplex state on bge(4), em(4), ixgb(4) and vge(4) devices.
+
- For pppoe(4), wrap authname and authke in quotes to prevent problems when using special chars.
+
+
- Added rde_check_route to dvmrp(8), still not complete.
+
- Fix for sparc colormaps when using cgtwo graphics.
+
- Fixes for uath(4) regarding detach and firmware RX.
+
- Make the virtual vmware vic(4) always assume full duplex when up.
+
- Added Rapid Spanning Tree Protocol support to bridge(4).
+
- First shot at endian fixing malo(4), still needs work.
+
+
- Fix for sparc64 machines using a frame buffer whose endianness differs from the host CPU.
+
+
- pthread fixes for pipes left in non-blocking mode after being closed.
+
- Two fixes for compress(1), one for using stdin and destdir not writeable, and the other for having a file called '-'.
+
+
- Make ipsecctl(8) handle multiple SAs with same src/dst but different port.
+
+
- Added some more ZD1211B variants to the list of supported zyd(4) devices.
+
- In malo(4), enable short slots, should stabilize and increase throughput.
+
- Add support in XF4 for vesafb to the wsfb driver. Allows unaccelerated and unprivileged X server on i386, with allowaperture=0.
+
- Remaining bits for ZD1211B support in zyd(4).
+
- Endian fix in ips(4) firmware handling code.
+
- Fix for block address calculation in specfs code for devices with blocksize other than 512.
+
- Enable monitor mode on malo(4) devices.
+
- Make kernel stack non-swappable.
+
- Make sure amd64 and i386 only enable acpi if ACPI_ENABLE is defined in the kernel config.
+
+
- Move the isakmpd(8) autogenerated public key into /etc/isakmpd, making it readable for unprivileged uses too.
+
- Let nmea(4) use tty timestamps if enabled, increases precision and lessens jitter.
+
- Code added to allow bgpd(8) to work on alternate routing tables.
+
- Make sure apm code handles the case when acpi steals power management functionality.
+
- Enable usbf(4) and cdcef(4) on Zaurus RAMDISK kernels so it can be used during install.
+
- On i386, make sure Enhanced Speedstep and other non-acpi setperf mechanisms are used only if acpi is not attached.
+
- Make the kernel malloc() print out a warning when returning NULL due to M_CANFAIL.
+
+
- Fixes for DMA TX handling on the ixgb(4) devices.
+
- Make spamd(8) error out for a greylisted session only after the DATA command, not after the RCPT command. Helps out with sender verification schemes.
+
- Change the way dhclient sends to a unicast destination IP address.
+
- Added support for different video modes on cfxga(4) devices. 8-bit modes disabled for now, and default still 640x480x16.
+
- Added acpi support to i386 and amd64 GENERIC kernels, though disabled.
+
- Initial import of vesabios for i386.
+
- Enable kvm86 in the i386 GENERIC kernels.
+
- Initial import of ips(4), a driver for the IBM ServeRAID controllers.
+
- Only use the ichpcib speedstep feature if we're running in a (Mobile) Pentium 4, since celerons do not support it.
+
- Add portugese LK-201 keyboard layout to vax machines.
+
- First attempt at making kvm86 multiprocessor safe.
+
- Prevent panics when booting GENERIC.MP with a vesabios kernel.
+
- Initial bits for ZD1211B support in zyd(4). Untested.
+
- Enable WEP on malo(4) devices.
+
- Speed up cfxga(4) by not storing complete bitmaps as a backing store for multiple screens, but remember character cells instead.
+
- Separate solid fills ops from regurlar raster ops in cfxga(4), brings us accelerated copyrows and copycols.
+
- Enable uberry(4) on i386 and amd64 GENERIC kernels.
+
- Make use of the multiple routing tables in the IPv4 and IPv6 input and forward handling code.
+
- Initial import of uberry(4), for battery charging and powering of the USB Blackberry device.
+
- For cfxga(4), always update cfxga_scr emulops field when creating a new screen, in case the card was removed and reinserted.
+
- Fixes for malo(4) reset handling, so ifconfig up/down works on amd64 too.
+
- Fix the blitter functions on pcmcia based cfxga(4) graphics, providing an accelerated putchar and fix synchronization points.
+
- Enable mpi(4) on sparc64 GENERIC kernels.
+
- Reworked the raster ops code for pcmcia based cfxga(4) graphics when monitoring cpu-to-display operation. Much faster that before.
+
- Enable malo(4) on amd64 GENERIC kernels.
+
- Silence some dmesg noise on Sun x4100 virtual consoles.
- Activate pwdog(4) on i386 and macppc GENERIC kernels.
- Added support in the scsi midlayer to handle detached targets better.
@@ -533,7 +710,7 @@
www@openbsd.org
-
$OpenBSD: plus.html,v 1.1032 2006/12/29 06:32:11 pvalchev Exp $
+
$OpenBSD: plus.html,v 1.1033 2007/01/13 02:18:15 pvalchev Exp $