===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1151
retrieving revision 1.1152
diff -u -r1.1151 -r1.1152
--- www/plus.html 2009/07/24 17:57:58 1.1151
+++ www/plus.html 2009/08/10 09:41:24 1.1152
@@ -55,667 +55,17 @@
4.2,
4.3,
4.4,
-4.5.
+4.5,
+4.6.
-
Changes made between OpenBSD 4.5 and -current
+
Changes made between OpenBSD 4.6 and -current
-
-- Added radeonfb(4) to sparc64, an accelerated framebuffer for Sun XVR-100 boards.
-
-
-
- Added support in re(4) for RTL8103E and RTL8168DP devices.
-
- Fix em(4) MAC address for dual-port 8257[56] cards.
-
-
- Added support for BCM5709 devices in the bnx(4) driver.
-
- Split bnx(4) firmware into several files and updated them.
-
- Make ksh(1) avoid infinite recursion if unlink of the history fails.
-
-
- Make ssh(1) handle long home dir paths.
-
-
- Add workaround to isp(4) autoconf for arches where the clock is not running yet.
-
- Make floor(3) round towards -inf instead of towards zero.
-
- Make the rc(8) scripts create a syslogd(8) socket in /var/www/dev when httpd is enabled to make logging to syslog work.
-
-
- Move the sparc second stage bootblocks 256KB higher to accomodate the growth of the GENERIC kernel.
-
- Updated time zone data to tzdata2009j.
-
- Added HW VLAN tagging/stripping for ix(4).
-
- Enabled isp(4) on hppa GENERIC kernels.
-
-
- Bring back MCLGETI support for ix(4) again.
-
- Fix ix(4) TX DMA map swapping.
-
-
- Teach sysmerge(8) how to handle links.
-
- Updated xf86-video-openchrome to rev 753.
-
-
- Make the install scripts add the default user to the 'staff' login class.
-
- Fix segmentation fault in m4(1) macro code.
-
- Fix a use-after-free in the pagedaemon.
-
- Fix in dc(4) for reading the MAC address out of the eeprom instead of CIS.
-
- Added support for ICH10 variants of em(4).
-
-
- Added support for VIA VX855 chipset in the viapm(4) and pciide(4) drivers.
-
- Updated xf86-video-intel to 2.7.1 and xf86-video-openchrome to svn rev 750.
-
- Re-enabled inteldrm in the i386 GENERIC kernel.
-
-
- Added a workaround for ehci(4) on ATI SB600 revisions and ATI SB700 south bridge revisions A12 and A13.
-
- Enabled softraid(4) on alpha, hppa and sparc64 RAMDISK kernels.
-
- Make watchdogd(8) lower stacksize before mlockall().
-
- Added support for the Broadcom HT-1100 chipset in the piixpm(4) driver.
-
- Fix extra psignal/wakeup in exit1() which could cause double SIGCHLD signals.
-
- Major update of the isp(4) driver.
-
-
- Synced mandoc to vesion 1.7.20.
-
- Added support for 82574L based devices in the em(4) driver.
-
-
- Fix pf(4) scrub max-mss for IPv6 traffic.
-
-
- Disable memory above 2G on sgi machines.
-
- Added and enabled stge(4) on sgi GENERIC kernels.
-
- Make wsmoused(8) support mice with lots of buttons.
-
- Updated sudo(8) to version 1.7.2.
-
-
- Fix possible NULL dereference in ssh(1) when aborting if key_sign fails.
-
- Make vax preserve more registers in sigcontext and return them in sigreturn. Fixes signal return regressions.
-
- Move the MI hme(4) fix for properly clearing the RUNNING/OACTIVE flags and watchdog timer to the sparc hme(4) code.
-
-
- Fix DMA map issues in the de(4) driver.
-
- Added two new views to systat(1), "nfsserver" and "nfsclient".
-
-
- Synced mandoc to version 1.7.19.
-
- Added MCLGETI support to vr(4) devices.
-
-
- Enabled experimental raid 4 & raid 5 disciplines in softraid(4).
-
- Added raid 4 and raid 5 in bioctl(8) create.
-
- Force softraid(4) Raid0/4/5 volume size to multiple of stripe size.
-
- Make ndp(8) check for the correct RTM_VERSION before accessing anything in the rt message.
-
- Make ntpd(8) handle ENOPROTOOPT, can happen when using IPv6.
-
-
-
- Better pfsync(4) detection of when we have a better version of the TCP sequence window than our peer.
-
- Backed out the bufq commits.
-
- Backed out the physmem allocator.
-
- Fix "gcc -Z" on powerpc machines.
-
- Backed out all uvm changes from c2k9.
-
-
- Backed out all the c2k9 buffer cache changes committed during c2k9.
-
- Synced mandoc code to version 1.7.16.
-
-
- Enable support in pfsync(4) for deferring the packets that creates a state so sync peers are able to receive the state before the reply.
-
- Fix tcpdrop(8) after the routing domain changes.
-
-
- Fix file(1) byteswapping in the ELF parsing code for BE64 systems.
-
- Removed the xf86-video-suncg6 driver from xenocara.
-
- Make sure splsoftnet() masks softclock on sgi machines.
-
-
- Rewrite the way pfsync(4) merges states into the local tree.
-
- Improvements in the softraid(4) raid 4 and raid 5 code.
-
- Limit the BCM5701 B5 chipset-based bge(4) devices to 32-bit mode.
-
- In bge(4), set the DMA read watermark to 4 to prevent some TX timeouts.
-
- Make hppa machines correctly flush direct cache and TLB mappings.
-
- Create a hotplug callback mechanism in softraid(4).
-
- Fix freelist overrun in libc gdtoa routines.
-
-
- Added support for VIA CX800 south bridge to the viapm(4) driver.
-
- Make hotplugd(8) ignore ECHILD from waitpid().
-
- Switch sgi to per-process ASTs.
-
- Added udl(4) and url(4) to sgi GENERIC and RAMDISK kernels.
-
- Fix procmap(1) on hp300 by allowing /dev/mem reads in the direct mapping region where there is corresponding physical memory.
-
- Move vi(1) to use poll(2) instead of select(2).
-
-
- Initial version of raid 4 & raid 5 support in softraid(4). Not functional yet.
-
- Fix NULL pointer dereference in pf(4) when receiving empty tables over pfsync(4).
-
- Do not accept IPv4 ICMP redirects by default. IPv6 redirects are still enabled.
-
- Updated the installation user input routines to redraw the question if dmesg changes are detected.
-
-
- Bring back "L" to list keyboard layouts during installs.
-
- Disable xlights on macppc GENERIC kernels.
-
- For amd64 and i386, do not enable EST if the machine only reports a single state.
-
- Updated time zone data to tzdata2009i.
-
-
- Fix file descriptor leaks in sdiff(1) when diffing regurlar files.
-
-
- Fixed minor memory leak in libc yp(8) code.
-
- Fix ftp(1) to handle abort transfers when talking to broken ftp servers.
-
- Make amd64 and i386 disable interrupts during the lock step frequency/voltage change. Fixes random lockups seen with "apm -C".
-
- In ntpd(8), when the clock has become unsynched, reset the number of saved time corrections.
-
- Imported xkeyboard-config into xenocara.
-
- Synced some rcsdiff changes into cvsdiff. opencvs diff -t now works.
-
- Implemented support for RTL8187b based devices in the urtw(4) driver.
-
- When running a 802.11 scan, make it fail if the interface is not up and not running.
-
- Initial code to bring in upcoming DRM support to X.org, starting with the i810 Intel IGP chipsets.
-
-
- When using sendbug(1) as root, add base64 encoded pcidump(8) and acpidump(8) output
-
- Removed debug output from dhclient(8).
-
- Added an X86EMU option to amd64 and i386 GENERIC kernels to enable the emulator subsystem.
-
- Added VGA BIOS repost support for amd64 and i386 using a small x86 emulator.
-
- Fix lapic, interrupt and clock issues on amd64 and i386 ACPI S3 resume.
-
- Fixed iwi(4) bug.
-
- Removed xf86rushproto and lots of input drivers that have been dropped by X.org.
-
- Updated xf86-video-suntcx to 1.1.1 and xf86-video-sis to 0.10.1.
-
- Fix NULL dereferencing in the ugen(4) USB code.
-
- Updated libpixman to 0.15.8, xf86-video-newport to 0.2.2, xf86-video-suncg3 to 1.1.1 and xf86-video-suncg6 to 1.1.1.
-
- Add support in fxp(4) for the 82552 MAC found in some ICH7 chipsets.
-
- Fix mg(1) cursor position after undo of a region-kill.
-
- When yp(8) is parsing the group(5) file, check early if YP is active or not, instead of half-way through the parsing.
-
- In the yp(8) code, treat an empty domainname as a failing call to getdomainname.
-
- Make the kernel time code abort any adjustment in progress if the clock is set with settimeofday.
-
- Make tmux(1) check LC_CTYPE, LC_ALL and LANG before trying to decide about UTF-8.
-
-
- Enabled IPv6 receive TCP/UDP checksum offload for jme(4).
-
- Added dynamic buffer cache sizing. The sysctl kern.bufcachepercent will allow you to specify a high-water mark above 10 percent for use by the cache. If you run low on memory, the page daemon will reclaim pages from the buffer cache.
-
- Add ability in wsmoused(8) to attach it to a different wsdisplay using -D.
-
- Add support to ping(8), traceroute(8), arp(8), nc(1) and telnet(1) to specify which routing domain to use.
-
- Add code in ifconfig(8) to bind an interface to a routing domain.
-
- Initial support for routing domain. Allows you to bind interfaces to alternate routing tables and separate them from other interfaces in distinct routing tables.
-
- After calling adjfreq to correct the clocks rate, measure and fix the clock offset.
-
- Fix problem in mg(1) where line numbers get out of sync on a region-kill.
-
- When running sysmerge(8) in auto-mode, install binary files from the X sets automatically.
-
- Make backtraces in ddb(4) through interrupts work.
-
- Switched default depth on xf86-video-glint to 24/32 bpp.
-
- Make rtsold(8) turn on -inet6 on the interface.
-
- Make ix(4) devices switch to a dynamic pool backed TX so it doesn't have to allocate everything up front.
-
- Recycled four unused fields in the disklabel structure to fit in bounds information about the zone of the disk that OpenBSD can use.
-
- Implemented CBT support (backward tab) in tmux(1).
-
- In setenv(3), do not assume we can overwrite strings in the environment.
-
- Allow ifconfig(8) to turn off IPv6 completely for an interface using the -inet6 option.
-
- Addde Sitecom WL-608 to the list of supported run(4) devices.
-
- Added proper support in tmux(1) for tab stops.
-
- Plug NFS mbuf leaks in the DRC.
-
- Added a resolv.conf(5) option to specify the order in which getaddinfo(3) queries will be made. Changed the default from ipv4 first and then ipv6 .
-
- Endian fixes in xf86-video-glint.
-
- Plug memory leak in systat(1) when the terminal is resized.
-
- Added support in tmux(1) for C0 within escape sequences and the C0 vertical tab.
-
- Make relayd(8) keep the SSL session for each checked host, making subsequent checks faster and lighter on the server.
-
- If getgrent(3) fails while handling a +groupname:*:: entry due to lack of memory, make sure we report the error condition.
-
- Fixed segfault in locate(1) if count gets out of bounds.
-
- Make tun(4) emulate link state depending on the open and close of the device fd.
-
-
- Fix the installer ftp(1) client to handle bracketed IPv6 host addresses.
-
- Fix auto-negotiation on some msk(4) devices.
-
- Rework the ip_input code decision on whether a packet is to be delivered locally or forwarded. Improves forwarding speed on boxes with many local addresses.
-
- Fix re(4) IPv4 RX checksumming for the non-TCP/UDP case.
-
- Added "rde rib " to the bgpd(8) config and allow the rde to use these other RIBs.
-
- Enable bge(4) IPv6 receive TCP/UDP checksum offload for the 5755 and later chips.
-
- Make ksh(1) in vi mode handle ^W erase more like vi(1).
-
- Fixed active ftp sessions over IPv6 in ftpd(8).
-
- Added gfxp(4) to sparc64 GENERIC, RAMDISK and RAMDISKU5 kernels.
-
- Added a kern.bufcachepercent sysctl(8) to allow adjusting the buffer cache size on a running system.
-
- Make wireless interfaces have priority 4 by default. Other interfaces remain at 0.
-
- Make tmux(1) pass window titles through vis(3) to remove nonprintable characters.
-
- Added hotplug device support on SGI machines and added hotplugd(8) to SGI builds.
-
- Changed the httpd(8) config to allow localhost to query server-status by default.
-
- Added basic infrastructure to take advantage of TCP and UDP receive checksum offload over IPv6.
-
- Added support in em(4) for the newer 82575 (and maybe 82576) chips.
-
- Make yp(8) support group(5) exclusion.
-
- Make putenv(), setenv() and unsetenv() in libc standards compliant.
-
- If both -h and -k are specified in df(1), the latter takes precedence.
-
- Better scp: URL handling in pkg_add(1).
-
- Fixed crash in tmux(1) when swapping pane positions.
-
- Imported an acpi power resource driver to amd64 and i386 GENERIC kernels.
-
-
- Make bge(4) set IFF_ALLMULTI properly when in promiscuous mode.
-
- Make dhclient(8) use the newer route flush functionality, which allows for multiple dhclients to coexist.
-
- Added acpivideo code to get brightness support for all laptops except thinkpads.
-
- Updated the NFS over UDP transmit logic.
-
- Enabled acpidock on amd64 and i386 GENERIC kernels.
-
- Disabled tmux(1) UTF-8 detection code, breaks on sparc64 machines.
-
- Fix apache so it reports Content-Length as 64-bit integers, allowing for files larger than 2G to be served.
-
- Switched uvm object global hash table to a red-black tree.
-
- Make the install scripts detect changes in the interface list.
-
- Reintroduced the powerpc interrupt rewrite for the macppc and socppc platforms.
-
- Make ospfd(8) and ripd(8) track reject and blackhole routes and allow them to be redistributed even if pointing to 127.0.0.1.
-
- Make softraid(4) rebuilds restartable over reboots.
-
- Fix bug in mg(1) where it would crash if lots of characters were inserted into the minibuffer.
-
- Make fxp(4) and rl(4) at pci detachable.
-
- In the iwn(4) driver, make sure it does not leak mbufs in the RX path in case hardware decryption failed.
-
- Make tmux(1) spawn login shells by default.
-
- Make atw(4) and dc(4) at pci detachable.
-
- Make gscsio(4) cope with logical device number gaps.
-
-
- Do not leak memory in tmux(1) if multiple -f flags are given.
-
- Fix problem with ypldap(8) lookup by uid.
-
- Fixed ksh(1) macro handling.
-
- Enabled the CRYPTO option by default on macppc and zaurus RAMDISK kernels.
-
- Make xl(4) at pci detachable.
-
- Added tmux(1) to the builds.
-
- Enabled machfb(4) and raptor(4) on the sparc64 RAMDISKU5 kernel.
-
- Enabled machfb(4) on sparc64 GENERIC and RAMDISK kernels.
-
- Implemented machfb(4), an accelerated driver for the sparc64 PGX/PGX64 framebuffers.
-
- Added an interface for CPU idle on amd64.
-
- Make rtw(4) devices detachable.
-
- Initial bits for softraid(4) rebuilds. Disabled for now.
-
- Fix NULL pointer dereference in the libc rpc(3) code when a client encounters ENOMEM while trying to print an error message.
-
- Better atomic locking routines for mips64.
-
- Imported tmux(1), a terminal multiplexer.
-
- Make smtpd(8) propagate the recipient domain through aliases expansion.
-
- Initial version of ldpctl(8) and ldpd(8), a label distribution protocol daemon for mpls.
-
- Make the uvm(9) RLIMIT_DATA check deal with wraparounds.
-
- Fix the order of checking whether an amd64 or i386 machine has MTRR.
-
- Disconnected sup(1) from the builds.
-
- Fix NULL dereference in acpidump(8).
-
- Fix ksh(1) crash when handling expressions containing "--" and "++".
-
- New physmem allocator in the uvm(9) code, changes the view of free memory from free pages to free ranges.
-
- Make udl(4) allow font widths other than 8 pixels wide.
-
- Removed window(1).
-
- Enabled zyd(4) on more platforms after the endian fix.
-
- Display SSL negotiation information in the received line of incoming sessions in smtpd(8).
-
- Fix libevent EV_READ/EV_WRITE for smtpd(8) also.
-
- In udl(4), fix End Of Command token for async transfers.
-
- Fixed endian issue in zyd(4).
-
-
- Add uvideo(4) to zaurus GENERIC kernels.
-
- Move the test for EST capability on amd64 outside the intel vendor check and use the EST CPU feature to determine if it is available or not.
-
- Enabled udl(4) on the socppc platform.
-
- Enabled pf(4) by default in the rc.conf(8).
-
- Make the pf(4) "set" operations for loginterface, hostid, reassemble and debug transactional.
-
- Reduced udl(4) overhead by addressing 256 pixels per command instead of 128.
-
- Added support for audible ping(8) and ping6(8). Use -e to beep on replies and -E to beep on missed packets.
-
- Fixed routing daemons using libevent to handle if EV_READ and EV_WRITE are set at the same time.
-
- Updated xcb-proto to 1.5, libxcb to 1.3 and xcb-util to 0.3.5.
-
- Workaround xterm(1) issue on ARM cpus.
-
-
- Updated lynx(1) to 2.8.6-rel15.
-
- Added SCH IDE support in pciide(4).
-
- Re-enabled interface state tracking again.
-
- Fix a missing refcnt bump causing panics in the kernel routing socket code.
-
- Added VIA CPU crypto support on the amd64 platform.
-
- In ntpd(8), use the SCM_TIMESTAMP socket option to get the time we received a reply, instead of the time when ntpd read from the socket.
-
- Added support in smptd(8) for specifying a certificate when relaying to another host which requests client certificates.
-
- Do not consider unresolved weak symbols in the ldconfig(8) prebind code an error.
-
- Added an acpi(4) error handler for missing AML nameref.
-
- Fixed acpi(4) parsing rules for Scope opcode. Fixes panics on some HP systems.
-
- Have softraid(4) bring up raid sets that have missing members.
-
- Make ddb(4) allow 8-byte writes on 64-bit platforms.
-
- Make route(8) flush accept "-iface/-interface" or "-priority" to be specified to only flush routes matching these conditions.
-
-
- When booting SGI machines in the "install software" mode, make them load the correct bsd.rd.IP## instead of just bsd.rd.
-
-
- Make fsck_ffs(8) check values in cg_initediblk more strictly to prevent corruption.
-
- Make vr(4) return the RX descriptor after pointing it to a new mbuf, fixes panics seen when handling many small packets.
-
- Fix disklabel(8) exit codes in order to help the install scripts catch failures.
-
- Make SGI machines handle NMI interrupts on IP27 and IP35 systems.
-
- Make smtpd(8) include both the incoming message size and the envelope address in the email headers.
-
-
- Made the install script acquire the list of attached disks and CDs whenever required so you can plug in additional devices after the install has started.
-
- Temporary fix in the smtpd(8) ruleset processing.
-
- Fixed old dhclient bug which could cause lease entries to be lost when initially loading the client leases.
-
- Make sure smtpd(8) will only allow one AUTH command per session and reject further AUTH attempts.
-
- Added request flood mitigation to smtpd(8).
-
- Updated the time zone data to tzdata2009g.
-
- Allow iwn(4) to coexist with Intel Active Management Technology which may use WLAN too.
-
-
- Added an option to bgpd(8) to change the "connect-retry" timer.
-
- Make sure cloned routes inherit the route label.
-
-
- Select the SGI TLB handler workaround at run-time since the fix for R5000 will confuse R10k rev 3 CPUs.
-
- For tcpdump(8), add a missing check for truncated dport in the returned UDP header for ICMP_UNREACH_PORT.
-
- Endian fix in em(4) VLAN handling.
-
-
- Make the security(8) script honor the SUIDSKIP variable to exclude paths from setuid and device checks.
-
- Added limited iommu functionality to the SGI xbow XBridge code, allows an IP35 machine with memory after the 2GB boundary to run.
-
- Enabled support in bge(4) for HW TCP/UDP/IP receive checksumming, and IP transmit checksumming.
-
- Added Pantech UM175 to the list of supported umsm(4) devices.
-
-
- BCM57790 is also supported in bge(4) since the last update.
-
- Added D-Link DWA-130 rev D1 to the list of supported otus(4).
-
-
- Added Unitek Y-2240 to the list of supported udl(4) devices.
-
- Imported libxcb 1.2 and xcb-util 0.3.4 into the xenocara tree.
-
-
- Add support for BCM567x, 577x and some new 572x/578x devices in bge(4).
-
- Added ForwardVideo EasyCAP008 and König CMP-USBVGA10 to the list of supported udl(4) devices.
-
-
- Make daily(8) skip ROOTBACKUP when the destination disk device is not configured.
-
- Make sure daemons do not fall back to the user "nobody" if the specific _user is not found.
-
- Add code to sparc and sparc64 to attach mice as wsmouse(4) devices. Allows sparc and sparc64 users to run X without a configuration file. Multihead still needs a minimal configuration file though.
-
- Make ntpd(8) check mode to prevent replying to broadcast and other unwanted ntp packets.
-
- First step towards smtpd(8) configuration reload.
-
-
- Prevent injection of raw 802.11 control frames through bpf(4) on devices that do not explicitly state this capability.
-
- Added Hercules HWNU-300 to the list of supported run(4) devices.
-
-
- Updated xinput to 1.4.2, xf86-input-vmmouse to 12.6.4 and xf86-video-vmware to 10.16.6.
-
- Make sure all users of the routing table index uses a signed type.
-
- Added support for the DisplayLink USB<->DVI Adapter in udl(4).
-
- Fix in gcc for sparc64 for INTMAX_TYPE and UINTMAX_TYPE.
-
- New firmware package for iwn(4), containing a new image for Wifi Link 5150. No change for 4965, 5000, 5100 and 5350-based devices.
-
-
- Rework color handling in cwm(1).
-
- Updated the Mesa GL code to 7.4.2.
-
- Make cwm(1) redraw the border when unhiding a client window.
-
- In bgpd(8), rework most of the RDE to allow multiple RIBs.
-
-
- Initial version of vsw(4), a driver for the virtual network switch on sun4v sparc64s.
-
- Enabled udl(4) on amd64, i386 and sparc64 GENERIC kernels.
-
-
- Enabled udl(4) and wsmux(4) on the armish platform.
-
- Enabled udl(4) and ukbd(4) on the landisk platform.
-
- Fix ospfd(8) route metric for "redistribute default".
-
- Updated the run(4) microcode.
-
- Added Mvix Nubbin MS-811N to the list of supported run(4) devices.
-
-
- Better MBR validation routines.
-
- Added Various GENERIC-IP## and RAMDISK-IP## files to the arch/sgi/conf dir to support the various models.
-
- Different SGI interrupt deadlock prevention using a timeout. Makes Origin 200 run multiuser.
-
- Make SGI boot code compile both 32-bit and 64-bit boot blocks.
-
- Added udl(4) in macppc GENERIC kernels. Disabled by default.
-
- Added cwm(1) configfile commands 'grouponly[1-9]' to select a group and hide all the others.
-
- Avoid loop in the UDF disksort() code.
-
-
- Added support on newer axe(4) devices to set a different MAC address than the one in the EEPROM.
-
-
- Added Adaptec AAR-1225SA to the list of sili(4) devices. Should work.
-
- Make sure pfsync(4) only send frequent updates for TCP connections, the state sync for all the other protocols only have 1-second resolution anyhow.
-
- Added udl(4) to i386 GENERIC kernels, disabled for now.
-
- Switched iwn(4) and wpi(4) over to the MCLGETI buffer allocator.
-
-
- Added support in umsm(4) for Truinstall enabled modems like Sierra 881U.
-
- The daily(8) script now looks for VERBOSESTATUS and if set to 0, no mails will be sent unless there is something to report.
-
- Added a new feature to sysmerge(8) when run in -a mode, to checksum reference files in order to be able to automatically upgrade all unmodified files next time. Also, -S and -X switches are now deprecated.
-
- Add Edimax RT2860-based devices attach to ral(4).
-
- Fix iwi(4) association with APs that refuse non short slot-time capable STAs.
-
- Enabled USB RX stream mode for run(4) devices.
-
- For VT6105M-based vr(4) devices, enable the IP, TCP and UDP checksumming.
-
-
- Enabled vcc(4) and vcctty(4) on sparc64 GENERIC kernels.
-
- Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator" found on the control domain of sun4v systems.
-
- Avoid the expensive mbuf copies on modern vr(4) devices and use a quirk table for device matching.
-
- Better job handling in make(1).
-
-
- Initial udl(4) console device driver for USB displays based on DisplayLink DL-120 / DL-160 display chips.
-
- Rewrite of the daily/weekly/monthly scripts run from cron(8). Weekly and monthly will be more silent now.
-
- Fix xbow devio byteswap on the SGI platform, makes isp(4) happy on IP27 and IP35 machines.
-
-
- Initial code for a port to the ARM7-based omap35xx platform. Not functional yet.
-
- Moved amas(4) to the generic dev/pci source dir and added it to the i386 platform also, still disabled by default on amd64 and i386.
-
-
- Make the default dot.login scripts skip terminal initialization when logging in from an xterm.
-
- Fix for SGI clock interrupt checks, would run at HZ/2 previously.
-
- Make sure ls(1) in -C mode does not ignore the COLUMNS environment variable even if the output filehandle is not a tty.
-
- Initial version of endrun(4), a driver for the EndRun Technologies native time-of-day timedelta sensor.
-
-
-
- Fix for xf86-video-mach64 ATI reference clock for Rage XL and Mobility cards on sparc64 so you can run X without an xorg.conf on machines like Blade100 and the Tadpole laptops.
-
-
- Updated libdrm to 2.4.9.
-
- Updated xf86-input-mouse to 1.4.0, xf86-video-ast to 0.89.0, xf86-video-nv to 2.1.13 and xf86-video-siliconmotion to 1.7.1.
-
- Updated xf86-input-penmount to 1.4.0, xf86-input-vmmouse to 12.6.3, xf86-input-void to 1.2.0 and xf86-input-keyboard to 1.3.2.
-
- Updated xf86-input-fpit to 1.3.0, xf86-input-hyperpen to 1.3.0 and xf86-input-joystick to 1.4.1.
-
- Updated xinit to 1.1.1, xf86-input-acecad to 1.3.0 and xf86-input-citron to 2.2.2.
-
- Updated xproto to 7.0.15, and xextproto to 7.0.4 and libX11 to 1.2.1.
-
-
- Various installation script updates and fixes, and a new ftplist backend that tries to provide a good ftp server for you to use.
-
- Updated inputproto to 1.5.0, libXi to 1.2.1 and xinput to 1.4.1.
-
- Updated xrandr, randrproto and libXrandr in xenocara to 1.3.0.
-
-
-
- Fix link state updates in vr(4) when used together with an rlphy(4).
-
-
- Added READ(16) and WRITE(16) commands to mfi(4).
-
- Make the boot loader able to pass db_console to the kernel, then use it to set ddb.console early in the boot for amd64 and i386.
-
-
- Enable hardware VLAN tagging/stripping on ix(4).
-
- Implemented 64-bit FIFO modes for ciss(4) devices.
-
- Extended top(1) STATE column to fit more than 9 CPUs.
-
- Added VLAN support on the install media where it fits.
-
- Make sure vr(4) interfaces do not get stuck if the interface went through a link state change.
-
- Make OpenCVS support some additional diff options: -a, -b, -d and -w.
-
-
-
- Updated time zone data to tzdata2009g.
-
- Fixed security issues in the freetype library.
-
- Updated xf86-video-radeonhd to 1.2.5.
-
-
- Make xterm(1) default to being a login shell by setting XTerm*loginShell:true in the Xdefaults for users.
-
- Make sure ftp(1) is not trying to send NOOP strings after server closes the connection.
-
- Added basic support for Envy24HT chips in the envy(4) driver.
-
- Fixed scalbn, scalbnf and frexpf on amd64 libm.
-
-
- Enabled berkwdt(4) on i386 GENERIC kernels.
-
- Updated file(1) to 4.24. Includes a "-i" switch so file(1) can output mime type strings.
-
- Added berkwdt(4), a driver for the Berkshire Products PCI PC Watchdog.
-
- Make relayd(8) allow both UDP and TCP redirections now.
-
- Moved ix(4) buffer allocations to MCLGETI.
-
- Added support in pciide(4) for ICH10 SATA devices not operating in AHCI mode.
-
-
- Fix segfault in ping(8) when displaying certain ICMP packets that are not echo replies.
-
- Move bge(4) jumbo frame allocator to the MCLGETI interface.
-
- Allow bgpd.conf(5) and bgpctl(8) to contain 32-bit ASN numbers written in ASPLAIN format.
-
-
- Make ntpd(8) ignore replies with timestamps after 2030 to prevent time_t / tv_sec wraps.
-
-
- Make bgpd(8) discard pfkey replies that were destined for some other host.
-
- Increased the default thread stack size to 256k for 32-bit hosts and to 512k on 64-bit hosts.
-
- Added Emobile D12HW to the list of supported umsm(4) devices.
-
-
- Added an 8U252AM4 chipset to the list of supported uftdi(4) devices.
-
- Make ftpd(8) log both remote IP and the remote hostname when receiving a new connection.
-
- Various small improvements in spamd(8).
-
- Fix renice(8) for a negative pid when in historic mode.
-
- Added an amas(4) device for amd64 based machines to describe the physical memory layout.
-
- Fix bnx(4) DMA map unmapping and unloading in the TX cleanup path.
-
-
- Enabled schsio(4) on amd64 and i386 GENERIC kernels.
-
- Moved ARM and SH soft interrupts to mutexes also.
-
- Switch the amd64 and i386 soft interrupt code over to mutexes instead of simplelocks + splhigh().
-
-
- Synced sudo(8) with version 1.7.1 final.
-
-
- Switched hme(4) over to the MCLGETI mbuf allocator for the RX ring.
-
- Make MPLS correctly handle packets the are leaving the MPLS cloud and joining the IPv4/IPv6 stack.
-
- Added "Connection close" to HTTP check headers in relayd(8) to not confuse HTTP/1.1 servers claiming keepalive sessions.
-
-
- Added support for -t, -v and -F cmdline args in the smtpd(8) sendmail interface.
-
-
- After the large pf(4) rewrite, fix a few things like correctly inheriting queue stuff, tag, rtableid from the rule if we have no state.
-
- Removed the unsused en(4) driver.
-
-
- Convert the sis(4) driver to the MCLGETI buffer allocator. Makes it handle overcapacity far better.
-
- Initial implementation of package signatures for pkg_add(1).
-
- Updated time zone data to tzdata2009f.
-
- Enabled ix(4) on amd64 and i386 RAMDISK kernels.
-
- Some tweaks to the CPU affinity code.
-
-
- Make sure the bnx(4) driver does not free an mbuf that still is in the TX queue.
-
- Start of Origin 200 support in the SGI platform.
-
-
- Converted various macros in the NFS code to functions to reduce kernel memory usage.
-
- Added a "-T title" option to ftp(1).
-
- Implemented a /dev/mdesc file for sparc64 platforms to read the machine description on sun4v virtual machines.
-
- Added support for IOC3 interrupts on SGI machines.
-
- Make smtpd(8) not assume all certificates match the interface names when explicitly provided in the configuration.
-
-
- When running sysmerge(8) in automode, it will automatically install files that only differ by CVS Id.
-
- RELIABILITY FIX: Null pointer dereference in pf(4)
-A source code patch is available.
-[Applied to stable]
- - Updated sudo(8) to 1.7.1.
-
-
- Added auto-disk layout to the installation media for simple one-disk installs.
-
- Moved sparc to generic soft interrupts.
-
-
- Updated xf86-video-i740 to 1.3.0, xf86-video-vesa to 2.2.0 and libICE to 1.0.5.
-
- Added a hook in sysmerge(8) to deal with special sendmail db files under /etc/mail.
-
-
-
- RELIABILITY FIX: OpenSSL ASN.1 invalid memory accesses.
-A source code patch is available.
-[Applied to stable]
- - Allow to specify an alternate control socket for ospfd(8).
-
-
- Disabled tht(4) checksumming, appears broken on fragmented packets.
-
- Updated time zone data to tzdata2009e.
-
- Initial version of a mandoc(1) program.
-
- Fix panic when unplugging an otus(4) device.
-
- Removed pf(4) scrub rules, and only do one kind of packet reassembly. Regular rules can now have per-rule scrub options. Also new "match" keyword and a small speedup.
-
- Make sysmerge(8) create a report summary file in the work directory.
-
- Updated OpenSSL to 0.9.8k.
-
-
- For the SH architecture, implement and use sqrt, sqrtf and fabsf in hardware.
-
- Updated fontconfig to 2.6.0.
-
- Make patch(1) also return an exit code to indicate failure, apart from the stderr output.
-
-
- Updated xterm(1)to version 243.
-
- Make OpenCVS properly expand modules if requested by the client.
-
-
- Make systat(1) show interface description names in the interface view.
-
- Added code in the scheduler to peg a process to stay on a CPU forever.
-
-
- Fixed smtpd(8) auth PLAIN authentication issues.
-
- Fixed SEM_UNDO handling for rthreads.
-
-
- Converted the procfs from lockmgr(9) to an rwlock(9).
-
- Added support in relayd(8) for specifying a CA file to verify SSL server certificates when connecting as a client from relays.
-
- Make relayd(8) re-initialize tables after reload to handle new and changed tables.
-
- Remove duplicate entry in fdisk(8) for partition id 0x07, so it shows up as NTFS.
-
- Added support in relayd(8) for client-side TCP connections from relays.
-
-
- When the acx(4) watchdog times out, reset the full chip.
-
- Fixed possible memory leaks in the yacc perser code used in various applications.
-
-
- RELIABILITY FIX: Use of pmap flags in DMA'able memory mapped by devices on i386 may cause the flags to be uninitialized and the devices to misbehave.
-A source code patch is available.
-[Applied to stable]
- - Switch sk(4) over to the MCLGETI allocators for the RX ring.
-
-
- Make systat(1) show usable numbers for fast disk transfer speeds in the vmstat view.
-
- Switched bnx(4) to the MCLGETI jumbo frame allocator.
-
- Fix puc(4) rate calculations for the 8-port Serial Technologies Expander PCI-232-108.
-
- Enabled ahc(4) on sparc64 RAMDISK kernels.
-
- Various ospfd6(8) updates and fixes.
-
- Fix kernel crash in uvideo(4) when closing bulk devices.
-
- Bypass macsec on extreme/supreme-based msk(4) devices, makes 88E8072 chips work.
-
- Fix hard lock issues on msk(4) devices.
-
-
- Fix hard locks in the msk(4) driver.
-
- Fix for race in mfi(4).
-
- Added an U command to the disklabel(8) E(ditor) to revert the label to the previous state.
-
- Added C99-conformant nan, nanf and nanl for the Vax platform.
-
- Fix for decoding pathnames in rdistd(1) which contain space,tab or newline characters.
-
-
- Fix soft interrupt handling on sun4m sparc machines, so Ross systems work when using hme(4).
-
- Added EW-7717Un and 7718Un to the list of supported run(4) devices.
-
- Added Edimax EW-7318Ug, 7318USg and 7618Ug to the list of supported rum(4) devices.
-
- Added support for the BCM5825 and 5860/61/62 Broadcom CryptoNetX IPSec/SSL Security processor in the ubsec(4) driver.
-
- Added ASUS USB-N11 to the list of supported run(4) devices.
-
- Fix for (root) logins when yp(8) is configured but temporarily unavailable.
-
- Added Sitecom WL-603 to the list of supported zyd(4) devices.
-
- Added Linksys WUSB200 to the list of supported rum(4) devices.
-
- Added a couple of GW3887/v2-based devices to the upgt(4) driver.
-
-
- Fix permission race in install(1) when run with -S.
-
- Fix handling of files in Attic/ for OpenCVS, also fixes -l and -r for checkout/update when a file in Attic exists in HEAD which is a directory in the normal repo.
-
- Updated xf86-video-siliconmotion to 1.7.0.
-
- Synced the net802.11 code with 802.11w draft 8.0.
-
- Added support for CACE AirPcap Nx in the otus(4) driver.
-
- Updated freetype to 2.3.9.
-
-
- Switched OpenCVS file and directory lists to Redblack tree(3) for faster lookups.
-
- Added watchdog timer support to schsio(4).
-
- Moved the NTFS kernel code from lockmgr(9) to rwlock(9).
-
- Added "Chen-Source CM12402 Eagle IR Cam" to the list of supported uvideo(4) devices.
-
- Make perl(1) encoding library recognize "646" as an alias for "ascii".
-
- Added Emobile D21LC to the list of supported umsm(4) devies.
-
-
- You may now feed sysmerge(8) older etcXX and/or xetcXX tarballs so sysmerge(8) can automatically update files that did not have local changes between versions.
-
- Added support for AES-CBC with the BCM5823-based ubsec(4) devices.
-
- Enabled otus(4) on amd64 and i386 GENERIC kernels.
-
- Changed the behaviour of "redistribute default" for ospfd(8) and ripd(8). A default route has to be present in the FIB to be correctly advertised.
-
- Upgrade txp(4) to a newer firmware, needed by some variants.
-
-
- Switched msk(4) to use MCLGETI for jumbo frame allocations.
-
- Initial version of otus(4), a driver for Atheros AR9001U USB IEEE 802.11 devices.
-
- Added rlog -d support in OpenCVS.
-
- Added CPU process affinity for SMP arches.
-
- Fix possible out-of-bounds access in ssh-agent(1) if the environment variable SHELL was shorter than 3 characters.
-
-
- Fix auto-negotiation for manual media type selection on ale(4).
-
- Add workaround for gem(4) RX MAC/FIFO hangs on ERI.
-
- Added an 'A' command to disklabel(8) Editor mode, and -A flag to automatically execute it on disks without a label.
-
-
- RELIABILITY FIX: Audio interrupts while filling the audio ring buffers could make the audio application go out of sync during high system load.
-A source code patch is available.
-[Applied to stable]
- - Made acpiprt(4) always re-route interrupts.
-
-
- Switched vax and sgi machines to have generic soft interrupts.
-
-
-
-
-
- Attached smtpd(8) to the build.
-
- Updated time zone data to tzdata2009c.
-
- Prevent ips(4) from setting error on data underrun, allows a scsi tape on the pass-through bus.
-
- Added support for 88E8057-based Yukon 2 Ultra 2-devices in msk(4).
-
-
-
-
- Initial support for pruning in dvmrpd(8).
-
- Added D-Link DWA-130 to the list of supported run(4) devices.
-
- Added SCSI Pass-through and enclosure support to ips(4).
-
-
- RELIABILITY FIX: aucat(1) in server mode will send each synchronization message twice which may cause stuttering.
-A source code patch is available.
-[Applied to stable]
- - Fix bgpd(8) to correctly encode MP unreachable NLRI so IPv6 prefixes get removed correctly.
-
-
- Make sure iommu attaches to AMD family 10h processors too.
-
-
- Added the MAC address to the log entries for DHCP ACK/NAK/OFFER in dhclient(8).
-
- Added sensor devices for Thinkpads.
-
- Updated freetype to 2.3.8.
-
- Enabled vic(4) on amd64 GENERIC and RAMDISK_CD kernels aswell.
-
- Make httpd(8) drop privileges to www/www instead of nobody/nogroup if the User/Group config file entries are not present.
-
- Enabled urtw(4) on amd64 and i386 GENERIC and RAMDISK_CD kernels.
-
- Initial version of a driver for the FFB3/XVR-1000 graphics adapters for sparc64. Disabled for now.
-
-
- Updated xterm(1) to 242.
-
-
- Switched the m88k platform to timecounters.
-
- Added support for Geyser2 devices and fix some Geyser1 devices that can be found in iBook G4 12" machines.
-
- Removed deprecated proxymgr and xfindproxy applications from xenocara.
-
-
- Updated xauth(1) to 1.0.3 plus some fixes from the git repository.
-
- Updated xf86-video-neomagic to 1.2.2 and xf86-video-s3 to 0.6.1.
-
- Updated xf86-video-ast 0.88.8, xf86-video-chips to 1.2.1, xf86-video-dummy to 0.3.1 and xf86-video-glint to 1.2.2.
-
- Updated xf86-video-voodoo to 1.2.1, xf86-video-apm to 1.2.1 and xf86-video-ark to 0.7.1.
-
- Updated xf86-video-tseng to 1.2.1 and removed xf86-video-cyrix/xf86-video-vga.
-
- Updated xf86-video-sisusb to 0.9.1, xf86-video-sunleo to 1.2.0, xf86-video-tdfx to 1.4.1, xf86-video-tga to 1.2.0 and xf86-video-trident to 1.3.1.
-
-
- Make dvmrp(8) RDE aware of multicast group members per interface.
-
- Bring in a few more PCI IDs into aac(4) to match IBM ServeRAID 8i and 8s.
-
-
- Added support for the IBM ServeRAID-8k in the aac(4) driver.
-
- Make ELF platforms generate ELF core dumps.
-
- Teach bfd and gdb(1) about the upcoming ELF core dumps.
-
-
- Stricter pf(4) checking for ICMP and ICMPv6 packets.
-
- Updated xf86-video-rendition to 4.2.1 and xf86-video-s3virge to 1.10.2.
-
- Added a user and a group for smtpd.
-
-
- Fix clock drift on 197DP mvme88k SMP machines.
-
- Make sure ntpd(8) does not convert the received refid to host byte order.
-
- Fix NFS on m88k SMP kernels.
-
- Added POSIX character class support to ksh(1) globbing.
-
- Added a few more RealTek RTL8187-based cards to the list of supported urtw(4) devices.
-
-
- Make sure the radix_mpath code checks rt_gateway is not NULL.
-
- Fixed the standalone tftp client to send valid ERROR packets to prematurely terminate a transfer.
-
-
- Added support in the mvme68k platform for MVME141 and MVME165 boards.
-
- Enabled raptor(4) on sparc64 GENERIC and RAMDISK kernels.
-
- Fixed ksh(1) test(1) operator precedence inconsistency.
-
- Added raptor(4), an accelerated framebuffer driver for the Tech Source Raptor GFX cards on the sparc64 platform.
-
- Make libc mktemp(3) also use digits in the random file name. Also include a termination condition after 2*N^62 attempts where N is the number of X's in the filename template.
-
- Prevent normal users from running "smtpctl show stats" and "smtpctl schedule".
-
- Make pfsync(4) check IFF_RUNNING before doing stuff, to save time for people that don't use pfsync.
-
-
+
- ...
@@ -754,14 +104,15 @@
4.2,
4.3,
4.4,
-4.5.
+4.5,
+4.6.
www@openbsd.org
-
$OpenBSD: plus.html,v 1.1151 2009/07/24 17:57:58 jj Exp $
+
$OpenBSD: plus.html,v 1.1152 2009/08/10 09:41:24 deraadt Exp $