===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1276
retrieving revision 1.1277
diff -u -r1.1276 -r1.1277
--- www/plus.html 2013/03/17 16:35:44 1.1276
+++ www/plus.html 2013/03/19 12:10:38 1.1277
@@ -74,13 +74,79 @@
+
+- Flush writes to BGE_MI_COMM to avoid "APE lock request failed!" errors with HP 331T (5719) and 332T (5720) bge(4) cards.
+
- Changed relayd(8) to use the monotonic clock instead of gettimeofday() and call fatal() on error-that-should-not-happen.
+
- Removed obsolete sudo(8) code that used to change the mode of sudoers from the old (pre-1.6) default.
+
- Reserve a file descriptor on accept() for subsequent connect() call by ftp-proxy(8), as done in relayd(8).
+
- Put tip(1) back, but without the hardlink to cu(1) for now.
+
- Make it possible to override already attached wsdisplay(4) console later in the boot process. Needed for upcoming KMS changes.
+
- Workaround for some PowerBooks without an adb(4/macppc) bus, to prevent their PMU from shutting down the machine.
+
- Prevent gzsig(1) going into an endless loop on input error.
+
- Prevent gzsig(1) race condition by using already opened file descriptors. Properly presume owner/mode of gzip(1) file.
+
+
- Add new cu(1), a libevent-based implementation of the old tip(1)/cu(1) with a few new things (eg basic xmodem support). Disable tip(1).
+
- Always use the internal PHY on Apple variants. This unbreaks gem(4) on some PowerMac G5.
+
- Disabled re(4) IP checksum offloading for Realtek 8168 (broken if the packet has IP options).
+
- Updated to: xterm(1) 291, bdftopcf(1) 1.0.4, beforelight(1) 1.0.5, ico(1) 1.0.4, xcalc(1) 1.0.5, xfsinfo(1) 1.0.4, xkbutils 1.0.4, xsetroot(1) 1.1.1, xstdcmap(1) 1.0.3, xvidtune(1) 1.0.3, xvinfo(1) 1.1.2, xsm(1) 1.0.3, libXrandr 1.4.0, and xrandr(1) 1.4.0.
+
- Enable TCP socket splicing for HTTP persistent connection and chunked transfer encoding. Speeds up relayd(8).
+
- Updated to fontconfig 2.10.91 + a few local fixes: replaced ugly bitmapped Lucida fonts with Luxi or DejaVu TrueType fonts; moved the target of fontconfig recipes to the "pattern" from the "font" to add the default values properly.
+
- Rewrite the ste(4) receive filter handling code and cleanup the ioctl bits.
+
+
- First steps towards alphabook1 support.
+
+
- Allow ssh(1) "-f none ..."
+
- Implement a bgpctl(8) nei foo destroy that will remove the specified cloned neighbour.
+
- Better bgpd(8) templates support: on config reload adjust the cloned neighbours so that they get the config changes as well; clean up sessions that are 1h idle but in state active (instead of down); allow bgpctl(8) to destroy cloned neighbours.
+
- Added submethod support to sshd_config(5) AuthenticationMethods.
+
- Fixed return value of wcrtomb(3) in single-byte locales if the "s" argument is NULL.
+
- Allow a "+" in the cron(8) MAILTO email address.
+
- Per POSIX, if getconf(1) confstr() returns zero without setting errno ("no defined value") then print "undefined\n".
+
+
- Correct the delay when programming the sis(4) short cable fix to 100us, not 100ms.
+
- Fixed and simplified determining whether we're using an rl(4) 8129 or 8139 chipset. Allows D-Link DFE-520TX to work.
+
- Fixed ssh(1) public key and hostbased authentication when the client has specified a style (e.g. "root:skey").
+
- Fatal() ssh(1) session when ChrootDirectory is specified while running without root privileges.
+
- Account for the size of the allocation when defending the uvm(9) pagedaemon reserve.
+
- Sync yyerror() in ospfd(8), ospf6d(8), snmpd(8), dvmrpd(8), ifstated(8), ldpd(8), ripd(8), smtpd(8) and ypldap(8) with version in bgpd(8), so that it logs to syslog when daemonised.
+
- Patch for CVE-2013-1667 in perl(1): DoS in rehashing code (see http://code.activestate.com/lists/perl5-porters/191311/).
+
- When dumping ospfd(8) config, just print "passive" for passive interfaces rather than showing the "hello" timers and keys.
+
+
- Fixed a bad comparison when calculating the size of the hibernate code's signature block.
+
- Updated: rgb to 1.0.5, xev(1) to 1.2.1, and sessreg(1) to 1.0.8.
+
- Reset ssh(1) pubkey order on partial success.
+
- Let whois(1) -P do a query against https://www.peeringdb.com/.
+
- softraid(4) disciplines are now shutdown in reverse attach order, making manually stacked volumes more practical.
+
+
- Reorder pci(4) code such that wsdisplay(4) attaches after drm(4). Preparation for framebuffer console support on amd64/i386.
+
- When deleting an IPv6 interface address, also remove the prefix and the cloning route.
+
- Added HG20F9 usb ethernet to axe(4).
+
- Check ldomctl(8/sparc64) parser's return value and exit if parsing failed. Report syntax error with duplicated domain name.
+
- Use vlog() to log relayd(8) parser errors so they will show up in logs if they occur when reloading.
+
- When user(8) is locking/unlocking an account, never touch passwords that are "*" or 13*. Also make sure to never end up with an empty password.
+
+
- Fixed format string issue when printing an error out on bge(4) with APE and more than 4 pci(4) functions.
+
- Fixed ksh(1) quoting in word part of ${var+word} (and similar) when entire thing is quoted or in a here-doc.
+
+
- Disabled duplicate address detection on carp(4) interfaces, as the peer may have the same addresses.
+
- Make sure that IPv6 source address selection only chooses a carp(4) address if the interface is in master state.
+
- Fixed the combination of "j" format flag and the XPG "$" modifier in vfprintf(3).
+
- Unbreak softraid(4) compilation with debug enabled.
+
- Fixed pf(4) so when a pf.conf(5) containing "set tos" is followed by a scrub option, the tos will not be changed to 0x00.
+
- Properly conditionalise adding wscons(4) to the list of consoles on amd64 NWSDISPLAY.
+
- Always compare aliases(5) at the end of the sysmerge(8). Prevents newaliases(8) from failing due to smtpd.conf(5) syntax change.
+
- When passwd(1) is using an external password quality check program, don't run (potentially contradictory) internal pattern checks.
+
+
- Bring getconf(1) substantially up to spec with POSIX 1003.1-2008: 155 new names; support for the -v option. Added support for non-standard -L and -l options for listing the known names.
+
www@openbsd.org
-
$OpenBSD: plus.html,v 1.1276 2013/03/17 16:35:44 deraadt Exp $
+
$OpenBSD: plus.html,v 1.1277 2013/03/19 12:10:38 brett Exp $