===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1389
retrieving revision 1.1390
diff -u -r1.1389 -r1.1390
--- www/plus.html 2016/07/02 23:53:51 1.1389
+++ www/plus.html 2016/07/03 11:20:30 1.1390
@@ -80,6 +80,103 @@
+
+- Convert ldapd(8) to use the libtls API.
+
- In file(1), fix the default type to work properly.
+
- In bytgpio(4), mask all gpio interrupts when attaching. This fixes interrupt storm on the Lenovo Ideacentre Stick 300.
+
- In sdhc(4) and sdmmc(4):
+
+- Implement DMA support (only ADMA2 is supported). There is a remaining issue with simultaneous use of eMMC and external SD card on (some) Intel Bay Trail hardware.
+
- Enable the ADMA error interrupt.
+
- Enable high speed timing for bus clock frequencies over 26MHz and advertise support for it.
+
+
+ - In tmux(1), add options to include status text in the pane borders.
+
- Fix several bugs due to uninitialized struct nameidata's.
+
- In softraid(4), panic when attempting to execute a scsi command with no discipline defined.
+
- Fix a bug causing gzip(1) to think the resulting file was got larger during compression.
+
- In daily(8), no langer call mailq(8).
+
- In sysmerge(8), in interactive mode, check syntax of several important files after merging to give some protection against bad merges.
+
- Don't allow the routing table of a bound socket to be changed. This is not intended and will behave unexpectedly if the address is already used in another domain.
+
- In tmux(1), fix keys parsing again to correctly accept Unicode when not prefixed with Escape.
+
- In smtpd(8), fix "smtpctl show queue" reporting "invalid" envelope state.
+
- In ssh(1), close the ControlPersist background process stderr when the daemon is not in debug mode or when logging to a file or syslog (bz#1988).
+
+
- In MAKEDEV(8), replace /dev/bpf[0-9] with /dev/bpf and /dev/bpf0.
+
- If the attempt to broadcast a DHCPDISCOVER packet returns EAFNOSUPPORT, just print an error message and exit.
+
- In installboot(8/i386), plug a couple of leaks of input buffers.
+
- In libssl, allow ^C to break operations such as reading passwords.
+
- In libssl, implement the IETF ChaCha20-Poly1305 cipher suites. The old Google implementation continues to be supported, but the ChaCha20-Poly1305 cipher suites names now refer to the ciphers from draft-ietf-tls-chacha20-poly1305-04.
+
- In libssl, rename EVP_aead_chacha20_poly1305(3) to EVP_aead_chacha20_poly1305_old() and replace it with EVP_aead_chacha20_poly1305_ietf(3). The IETF version will become the standard version.
+
- In ieee80211, rework handling of frames which fall beyond the block ack window.
+
- In netstat(1), display block ack window slide counter.
+
- In compress(1), account for multiple streams in "gzip -l" output.
+
- In httpd(8), simplify TLS configuration handling and prevent a memory leak when there are multiple certificates specified for the same server.
+
- In ifconfig(8), show 11n HT rate in "ifconfig scan" output.
+
- Unbreak fsck_ext2fs(8).
+
- In libedit, initialize the search buffer to avoid a potential read buffer overrun.
+
+
- In xge(4), correctly set up byteswapping so this chip works on big-endian architectures.
+
- In tmux(1), apply backspace check after working out the actual key, so that M-BSpace can work.
+
- In xge(4), align rx buffers so ip packets will be aligned correctly for the stack.
+
- In ksh(1), do not handle echo "`echo \"hi\"`" in POSIX mode differently than in traditional mode. This aligns ksh's behavior with bash and FreeBSD sh.
+
- In netstat(1), make -W show the new 802.11n counters.
+
+
- In netstat(1), print tcps_noport with "netstat -s" like it is already done for udp.
+
- In tmux(1), fix problems with meta and Unicode keys.
+
- In rcctl(8), implement daemon_rtable support.
+
- In rc.subr(8), introduce rtable(4) support to rc.subr(8).
+
- In readelf(1), show octeon in "readelf -h" output.
+
- In rc(8), re-link (only the newest) libc.so on startup, placing the objects in a random order.
+
- In softraid(4), don't attempt a rebuild using a hot spare with a sector size greater than the sector size of the softraid volume.
+
- Use pledge(2) in groupadd(8), groupmod(8), groupdel(8), groupinfo(8), user(8), useradd(8), usermod(8), userdel(8) and userinfo(8).
+
- In sysmerge(8), be consistent in batch and interactive mode: ensure sysmerge can be re-run if a file is left for later.
+
- In acpitz(4), if the temperature is below the active cooling level for a tz, turn the fan off regardless of what state it is currently in.
+
+
- In rtsx(4), match on RTS522A found in 2016 ThinkPads.
+
- Remove systrace support.
+
- In install script, when upgrading automatically run sysmerge(8) in batch mode before fw_update(1).
+
- On macppc and socppc, don't check if the CPU is inside the idle loop when entering ddb(4). This allows putting breakpoints in interrupt context and have them work if an interrupt fires while the CPU is idle.
+
+
- In httpd(8), always pass the QUERY_STRING variable to the FastCGI handler.
+
- In Xserver(1), fall back to /dev/ttyC0 when the console device is not a wsdisplay(4).
+
- In ichiic(4), match on Intel 100 Series LP.
+
- In puc(4), match on Intel 100 series and 100 series LP PCH.
+
- In azalia(4), enable snooping on Intel 100 Series LP HDA.
+
+
- Fix an issue where the 32-bit UEFI bootloader (BOOTIA32.EFI) would not detect a GPT leading to a failure to boot.
+
- On mips64, sync dcaches and invalidate icaches of all active CPUs of a pmap when making a page executable. This prevents some icache inconsistencies that caused process crashes on multiprocessor IP27/IP30 systems under load.
+
- In dwiic(4), match on Cherry Trail.
+
+
- In synaptics(4), don't stop scrolling when handling TOUCH_RESET events.
+
- In asmc(4), don't try to probe light sensors for machines with none available.
+
+
- In mpbios(4), don't attach if "default configuration" mode is detected during probe rather than panicking.
+
- In smtpd(8), use automatic DH parameters instead of fixed ones. Also disable DHE by default since it is computationally expensive and a potential DoS vector.
+
+
- In perl(1), apply fix for perl bug 123562 (CVE-2015-8853).
+
- In changelist(5), don't watch unbound(8)'s DNSSEC root zone key, to reduce security(8) spam.
+
- In re(4), if RTL8111E on PC Engines APU is detected, configure NIC LEDs to display link (instead of the default of a normally-off light for network activity and nothing for ethernet link).
+
- In changelist(5), add the iked(8) default key.
+
+
- Add the editline(7) manual.
+
- Make setting a vlan(4) interface's lladdr more likely to work.
+
- Use the correct byte-order when checking against baddynamic ports.
+
- In xen(4) and xnf(4), allow to grant memory access to domains other than dom0. This fixes running OpenBSD under QubesOS.
+
- In pod2man(1), enable UTF-8 output by default and provide a --no-utf8 command line option to disable it.
+
+
- In pax(1), skip empty lines in the input read for "tar -T", "cpio -E", and cpio(1) with stdin.
+
- On amd64, make the aesni crypto implementation MP-safe.
+
- Add a mechanism for dispatching MP-safe crypto operations.
+
- Update to tzdata2016d from from ftp.iana.org.
+
- Bump the default of cachepercent to 90 to see if we can find problems before we try to remove it entirely.
+
- In pppoe(4), remove a hack that prevented changing pppoe params at runtime.
+
+
- In nvme(4), fix a bug causing memory corruption seen on amd64 (and masked on sparc64).
+
+
- In rbootd(8), don't bcopy(3) non-exchangeable structs. This should unbreak connection timeouts.
+
- Remove am_maxslot from amap and remove the corresponding output from procmap(1).
+
- In inteldrm(4), make the GMBUS code work on Intel ValleyView.
- In rm(1), don't allow removal of "/".
- In eigrpd(8):