===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1436
retrieving revision 1.1437
diff -u -r1.1436 -r1.1437
--- www/plus.html 2019/04/23 22:28:29 1.1436
+++ www/plus.html 2019/05/05 16:17:17 1.1437
@@ -83,6 +83,46 @@
+
+- Added a check to ospfd(8) and ospf6d(8) that any "depend on" interfaces are in the same rdomain.
+
- Changed default Ruby version in ports(7) to 2.6.
+
- Removed the KERNEL_LOCK from the bridge(4) output fast-path.
+
- Cranked BUFCACHEPERCENT back down to 20 after the increase to 80 exposed a few problems.
+
- Started a cleanup of boot media creation and made the process use the new vnconfig(8) vnd-auto-allocate mode.
+
- Removed the need for the -A option from vnconfig(8).
+
- Silenced all of the OKs from signify(1) while it is verifying the install sets for sysupgrade(8).
+
+
+
- Modified syspatch(8) to default to using cdn.openbsd.org if there isn't a proper /etc/installurl.
+
- Changed sysupgrade(8) to re-verify the signature only for SHA256 when checking the old files.
+
- Regenerated moduli(5).
+
- Imported libdrm 2.4.98.
+
+
- Removed vnconfig(8) functionality from mount_vnd(8).
+
- Added sysupgrade(8), a tool to upgrade OpenBSD to the next release or a new snapshot.
+
- Split vnconfig(8) out of mount_vnd(8).
+
- Extended the maximum size of the bgpd(8) shutdown communication message to 255 bytes. Made the same adjustment to bgpctl(8).
+
- Fixed a potential panic in inteldrm(4) caused by an interrupt coming in before the interrupt handler is set up.
+
- Adjusted tmux(1) to automatically scroll when dragging to create a selection with the mouse when the cursor reaches the top or bottom line.
+
+
- Added support for the USB serial adapter found in Juniper SRX 300 to uslcom(4).
+
- Used unveil(2) to restrict file system access in relayd(8) to read only.
+
- Added a watchdog for unattended upgrade to reboot after 30 minutes in case the script halts.
+
- Changed most bootloaders to boot from /bsd.upgrade if it is present.
+
- Implemented SIOCGIFSFFPAGE in bnxt(4) so that ifconfig(1) can get transceiver information from it.
+
+
- Added the pci(4) product id for the VMware nvme(4) interface.
+
- Added support for ccp(4) at acpi(4).
+
- Added pinctrl(4) support for 'pinconf-single' devices and support for bias and drive-strength properties, needed for HiSilicon SoCs.
+
- Added the octiic(4) driver for OCTEON two-wire serial interfaces.
+
- Removed file name and line number output from witness(4), along with the wrapper for mutexes.
+
- Added -no-clear variants of copy-selection and copy-pipe to tmux(1) which do not clear the selection after copying.
+
- Checked for linkstate instead of IF_STA_POINTTOPOINT for originating router LSAs for P2P interfaces in ospfd(8), making 'passive' work on P2P interfaces.
+
+
- Modified vmm(4) to flush guest TLB entries if the guest disables paging.
+
- Began to change only the clock frequency and skip setting voltage on arm64 systems supporting DVFS which do not expose a regulator.
+
- Added support for official Linux device tree bindings and the 'stub' clocks handling CPU clock frequency on the Hi3670.
+
- Stopped prompting for disks that do not contain a root partition during upgrades. This defaults to the correct disk when full disk encryption is in use, and will be useful for future unattended upgrades.
- Set vlan(4) to use if_vinput instead of if_input, bypassing ifiqs and improving vlan input speeds.
- Added if_vinput so pseudo (ethernet) interfaces can bypass ifiqs, running interface input handlers directly rather than queuing the packets for a nettq to run and improving performance.