===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus.html,v
retrieving revision 1.1489
retrieving revision 1.1490
diff -u -r1.1489 -r1.1490
--- www/plus.html 2021/02/11 19:31:50 1.1489
+++ www/plus.html 2021/03/10 19:12:45 1.1490
@@ -92,6 +92,99 @@
+
+- Enabled ixl(4) on arm64.
+
- Added support for sdhc(4) on the Raspberry Pi in ACPI mode.
+
- Added support for rk809 to rkpmic(4), as seen on the Rock Pi N10 with the rk3399pro.
+
+
- Removed workaround permitting Go executables to do syscalls directly, forcing them to use shared libc like all other dynamic binaries.
+
+
- Completed slaacd(8) implementation of RFC 8981 temporary address extensions.
+
+
+
- Introduced an IOVA allocator to smmu(4).
+
- Added an initial attempt to support 8-bit ASIDs such as those on Apple's M1 SoC.
+
- Updated clock interrupt count atomically on mips64.
+
+
- Fixed a problem which prevented use of sysupgrade(8) when an interface failed to come up and dhclient(8) didn't notice link-timeout expiration.
+
- Released OpenSSH 8.5.
+
- Added a configurable button mapping for tap gestures on touchpads to wsconsctl(8).
+
- Fixed visibility of sndioctl(1) output when used through a pipe.
+
+
- Separated reading of general and touchpad-specific wsmouse(4) settings and corrected identification of device type when reading touchpad parameters fails.
+
- Added the ability to define single value variables in the mg(1) startup file and use them with find-file.
+
- Removed tmux(1) support for popups where the content is provided directly to tmux.
+
- Introduced bgpd(8)
rde evaluate all to work around path hiding in IXP route-server environments.
+ - Allowed mixing of alternative devices (-F) with different capabilities in sndiod(8) by treating any device as full-duplex.
+
+
- Updated perl(1) to 5.32.1.
+
- Added support for PCIe on the NanoPi R4S to rkpcie(4).
+
+
- Added smmu(4), a driver for the ARM System MMU.
+
- Added acpiiort(4), a driver for the ACPI I/O Remapping Table.
+
+
- Added apldart(4), a driver for the IOMMU on Apple M1 SoCs.
+
- Added logger(1) support to rcctl(8), rc.subr(8) and rc.d(8) for daemons logging to stdout/stderr.
+
+
- Increased RX buffers available to the bwfm(4) chip to 256, allowing use of the Apple M1's wifi.
+
- Introduced dhcpleased(8), a dhcp daemon to acquire IPv4 address leases from servers.
+
- Added aplpcie(4), a driver for the PCIe host bridge on Apple M1 SoCs.
+
+
- Added support for version 7 of the bwfm(4) PCIe interface.
+
- Prevented nvme(4) attachment to devices with size zero.
+
+
- Added resolvd(8), a daemon to rewrite resolv.conf(5).
+
+
- Cleared interrupts on luna88k processors more efficiently at boot time.
+
- Allowed specification of a path to the mg(1) startup file on the command line.
+
- Added support for adding and deleting mac addr entries on nvgre(4).
+
- Added support for adding and deleting address table entries to bpe(4), veb(4) and etherbridge.
+
- Added aplintc(4), a driver for the interrupt controller found on Apple M1 SoCs.
+
+
- Introduced veb(4), a Virtual Ethernet Bridge driver.
+
- Added apldog(4), a driver for the watchdog on Apple M1 SoCs, allowing reboot of the machine.
+
- When cutting off the head of an overlapping fragment during pf(4) reassembly, reinserted the fragment into the lookup table with the correct index.
+
+
- Added cryptox(4), a driver for armv8 cryptographic extensions.
+
- Added ping(8) -g option to provide a visual display of packets received and lost.
+
+
- Made the libunwind cache thread-safe.
+
- Fixed disestablishing of PCI interrupt handlers on octeon.
+
- Added etherbridge, the internals of a reusable learning bridge interface providing common code reusable for other drivers needing a mac learning bridge.
+
+
- Added a MONITOR flag to ifaces to indicate they are used only for watching packets which will not be enter the network stack for processing.
+
- Appended .html suffixes to temporary files in mandoc(1) to allow recognition by browsers.
+
+
+
+
- Added exuart(4) support for hte UART found on the Apple M1 SoC.
+
- Enabled multiple opens of a video(4) device as described in the V4L2 specification.
+
- Added bgpctl(8) "show rtr" to display basic information about RTR sessions.
+
- Added RTR support to OpenBGPD.
+
+
- Added PermitRemoteOpen to ssh(1) for remote dynamic forwarding with SOCKS.
+
- Added support for X11 color names and other variations for OSC 10/11 and added OSC 110 and 111 to tmux(1).
+
+
- Restored rdsetroot(8) -x usage on stripped bsd.rd.
+
- Updated to xterm(1) 366.
+
+
- Added iked(8) dynamic address configuration for roadwarrior clients, with a new "iface" config option which can be used to specify an interface for the virtual addresses received from the peer.
+
+
- Synced cert.pem with Mozilla NSS root CAs (except "GeoTrust Global CA").
+
- Created /dev/ drm nodes with the same names as linux to simplify libdrm and negate the need for certain ports patches.
+
+
+
- Prevented the kernel from being stuck in an endless recursion during TCP path MTU discovery when pf(4) changes the routing table when sending packets.
+
- Moved UNIX domain sockets out of the kernel lock, using the new "unp_lock" rwlock(9) as solock()'s backend to protect the whole layer.
+
+
- Enabled build and install of lldb(1).
+
- Added an optional "group none" transform for child SAs in iked(8) to ensure the ability to negotiate optional PFS.
+
+
- Added a barrier between reading the cqe flags and the command ID to prevent completion of the wrong scsi io for nvme(4) drives.
+
- Removed the maxburst feature from tcp_output.
+
- Corrected raidlevel verification specified by the -c option in bioctl(8).
+
- Added a RAID1C (raid1 + crypto) softraid(4) discipline, encrypting data like the CRYPTO discipline and accepting multiple chunks during creation and assembly like the RAID1 discipline.
+
- Moved to 6.9-beta.
@@ -130,7 +223,7 @@
- Renamed the HostbasedKeyTypes keyword in ssh_config(5) and the HostbasedAcceptedKeyTypes keyword in sshd_config(5) to HostbasedAcceptedAlgorithms.
- Disabled logging to syslog(3) for libunbound with unwind(8). Does not prevent logging to stderr with "unwind -d".
-
- Fixed a data toggle out of sync problem for ugen(4) and uhidev(4) devices on xhci(4) controllers.
+
- Fixed a data toggle out of sync problem for ugen(4) and uhidev(4) devices on xhci(4) controllers. (Reverted 2021-02-15).
- Raised the mcx(4) max number of queues/interrupts from 1 to 16.
- Introduced the bgpd.conf(5) per neighbor and global config option "reject as-set yes/no" to allow rejection of received UPDATES with AS_SET segments. These rejected prefixes can be viewed with bgpctl(8) "show rib in error".
- Fixed wg(4) ioctl to handle multiple wgpeers.