===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus42.html,v
retrieving revision 1.28
retrieving revision 1.29
diff -u -r1.28 -r1.29
--- www/plus42.html 2016/03/21 05:46:20 1.28
+++ www/plus42.html 2016/03/22 10:54:42 1.29
@@ -78,591 +78,591 @@
-- Fix in pkg_add(1) regarding package names.
+
- Fix in pkg_add(1) regarding package names.
-
- Make sure sppp(4) aligns the packet after the ppp header, fixes use on sparc.
+
- Make sure sppp(4) aligns the packet after the ppp header, fixes use on sparc.
-
- Add rlphy(4) to amd64 RAMDISK kernels.
+
- Add rlphy(4) to amd64 RAMDISK kernels.
-
- Do not fill spamd(8) debug with bogus config errors if there are no traps.
-
- Make ftp-proxy(8) add rules immediately after the client sends the PORT command instead of waiting until the client actually requests a transfer.
-
- Update sudo(8) to 1.6.9p4, adds IPv6 support and improved man pages.
-
- Add sti(4) at uturn on hppa GENERIC and RAMDISK kernels.
-
- Make ssh(1) not fall back to the trusted X11 cookie if generation of an untrusted cookie fails.
+
- Do not fill spamd(8) debug with bogus config errors if there are no traps.
+
- Make ftp-proxy(8) add rules immediately after the client sends the PORT command instead of waiting until the client actually requests a transfer.
+
- Update sudo(8) to 1.6.9p4, adds IPv6 support and improved man pages.
+
- Add sti(4) at uturn on hppa GENERIC and RAMDISK kernels.
+
- Make ssh(1) not fall back to the trusted X11 cookie if generation of an untrusted cookie fails.
-
- Added nxe(4), a driver for the Netxen 10GE cards.
+
- Added nxe(4), a driver for the Netxen 10GE cards.
- Work around problems on VIA CPUs when switching between FPU context and Padlock entropy polling.
-
- Fix segmentation fault in tcpdump(8) when decoding 802.11 traffic in certain ways.
-
- Remove unfinished nx(4) driver.
-
- Add missing siop(4) at phantomas and uturn on hppa GENERIC and RAMDISK kernels.
-
- Error out on passwd(1) if trying to change the YP password and the rpc.yppasswdd(8) daemon is unreachable.
+
- Fix segmentation fault in tcpdump(8) when decoding 802.11 traffic in certain ways.
+
- Remove unfinished nx(4) driver.
+
- Add missing siop(4) at phantomas and uturn on hppa GENERIC and RAMDISK kernels.
+
- Error out on passwd(1) if trying to change the YP password and the rpc.yppasswdd(8) daemon is unreachable.
-
- Stop isakmpd(8) from complaining about not being able to read non-existent files.
-
- Enable CF malo(4) for macppc GENERIC kernels.
-
- Endian fixes for malo(4) in the association code path.
+
- Stop isakmpd(8) from complaining about not being able to read non-existent files.
+
- Enable CF malo(4) for macppc GENERIC kernels.
+
- Endian fixes for malo(4) in the association code path.
- Be more careful on sparc64 when asking the openprom for the next property.
-
- Fixed a DoS in httpd(8) where the server might terminate arbitrary processes.
-
- Add event handler to malo(4), which allows for automatic reassociation after receiving a disassociation frame.
+
- Fixed a DoS in httpd(8) where the server might terminate arbitrary processes.
+
- Add event handler to malo(4), which allows for automatic reassociation after receiving a disassociation frame.
-
- Make systat(8) also handle NULL when doing realloc.
+
- Make systat(8) also handle NULL when doing realloc.
- Make btree DB code in libc handle NULL when doing realloc.
-
- Make sure ld.so(1) does not get built and installed on NOPIC architectures.
-
- Fix in httpd(8) mod_status module for CVE-2006-5752.
+
- Make sure ld.so(1) does not get built and installed on NOPIC architectures.
+
- Fix in httpd(8) mod_status module for CVE-2006-5752.
- Prevent a potential null-pointer derefence on amd64.
- Force xterm to legacy mode regarding Shift-F1 to Shift-F4, since the behaviour changed in xterm-225.
- Add "dma" and "ledma" on sparc64 as buses again, makes Ultra-1 machines find their root disk.
-
- Make isakmpd(8) check file type after fstat, since d_type is not passed over NFS.
-
- Make sppp(4) use length of the mbuf instead of the packet when sending a protocol reject.
-
- Make kqueue(2) correctly handle EOF on pipes.
+
- Make isakmpd(8) check file type after fstat, since d_type is not passed over NFS.
+
- Make sppp(4) use length of the mbuf instead of the packet when sending a protocol reject.
+
- Make kqueue(2) correctly handle EOF on pipes.
- Provide software HMAC for glxsb CPUs, so IPSec can use the crypto HW.
- Make sure OpenSSH executes LocalCommand after the tunnel device is opened.
- Bring vfs handling back to former performance levels.
-
- Make malo(4) RX/TX work on big endian arches.
+
- Make malo(4) RX/TX work on big endian arches.
- Disable XDCMP over IPv6 for now.
-
- Fixed two issues in ospfd(8) regarding RIB calculation.
+
- Fixed two issues in ospfd(8) regarding RIB calculation.
- Add support on hppa machines for Zalon NCR 53c720 FW scsi.
-
- Add support in siop(4) for non-PCI NCR 53c720/70-based devices in big-endian mode.
+
- Add support in siop(4) for non-PCI NCR 53c720/70-based devices in big-endian mode.
- Enable Compact Flash driver for Marvell 88W8385 Chips on amd64, i386 and zaurus GENERIC kernels.
-
- Fix crash in mkalias(8) for yp(8) when using specific malloc.conf settings.
+
- Fix crash in mkalias(8) for yp(8) when using specific malloc.conf settings.
-
- Full HW WEP in malo(4).
-
- Allow key exchange in isakmpd(8) with RSA signature authentication with peers who only send their certs in response to CERT_REQUEST.
+
- Full HW WEP in malo(4).
+
- Allow key exchange in isakmpd(8) with RSA signature authentication with peers who only send their certs in response to CERT_REQUEST.
- Add AGP support for Intel i965 chipsets.
- Fix crash in X11 savage driver during resolution change.
-
- Add ne(4) on cardbus for sparc64 GENERIC kernels.
+
- Add ne(4) on cardbus for sparc64 GENERIC kernels.
- Added rbus to the sparc64 platform.
-
- Make ddb(4) ps able to print full name of wait states instead of truncating them.
+
- Make ddb(4) ps able to print full name of wait states instead of truncating them.
- Fixed a potential deadlock when the pagedaemon waits for pages.
-
- Add nvram(4) code from i386 to the amd64 platform.
-
- Fix memory leaks and potential null dereference in ksh(1).
+
- Add nvram(4) code from i386 to the amd64 platform.
+
- Fix memory leaks and potential null dereference in ksh(1).
-
- Add proper recording encodings to auich(4).
-
- In netstart(8), move the delay for IPv6 DAD to after all interfaces have been started.
+
- Add proper recording encodings to auich(4).
+
- In netstart(8), move the delay for IPv6 DAD to after all interfaces have been started.
- Retired the cats platform.
-
- Stop making de(4) win over dc(4) on alpha machines, and include both dc(4) and de(4) on all installation media.
-
- Fix for null dereference in column(1) when -t flag is given and a line consists solely of delimiters.
+
- Stop making de(4) win over dc(4) on alpha machines, and include both dc(4) and de(4) on all installation media.
+
- Fix for null dereference in column(1) when -t flag is given and a line consists solely of delimiters.
- Lots of 802.11 improvements and code in preparation for WPA and other auth styles.
-
- Make ksh(1) escape [, ] and ? as well.
-
- Allow ftp-proxy(8) to add tag statements to the pf(4) rules it inserts.
+
- Make ksh(1) escape [, ] and ? as well.
+
- Allow ftp-proxy(8) to add tag statements to the pf(4) rules it inserts.
-
- Add code for auto association in the malo(4) driver.
-
- Plug a mbuf leak in the malo(4) TX path.
-
- Fixes for mixer handling on azalia(4).
-
- Improvements in the malo(4) RX/TX path.
+
- Add code for auto association in the malo(4) driver.
+
- Plug a mbuf leak in the malo(4) TX path.
+
- Fixes for mixer handling on azalia(4).
+
- Improvements in the malo(4) RX/TX path.
-
- When setting a vlan device without specifying a tag in ifconfig(8), infer the tag from the interface name.
-
- Make ln(1) warn when source and destination are identical.
-
- Improvements in the way pcmcia based malo(4) devices get rates-element-id from management frames sent from certain APs.
-
- Avoid segfault in ifconfig(8) when given an empty interface name.
-
- Fix for isakmpd(8) cases where it could not get in-kernel last-used-counters in order to implement DPD.
-
- Various improvements to make(1).
+
- When setting a vlan device without specifying a tag in ifconfig(8), infer the tag from the interface name.
+
- Make ln(1) warn when source and destination are identical.
+
- Improvements in the way pcmcia based malo(4) devices get rates-element-id from management frames sent from certain APs.
+
- Avoid segfault in ifconfig(8) when given an empty interface name.
+
- Fix for isakmpd(8) cases where it could not get in-kernel last-used-counters in order to implement DPD.
+
- Various improvements to make(1).
-
- Add support on sparc64 for different styles on the bootpath so Ultrabooks booting off wd(4) can find their root disk.
+
- Add support on sparc64 for different styles on the bootpath so Ultrabooks booting off wd(4) can find their root disk.
- Fix for random crashes on PA-8700 and PA-7200 hppa machines due to cache-line sharing.
- Bring in GLw from XF4 to xenocara to replace the Mesa version.
- Do not map sparc64 interrupts that already are fully specified. Makes onboard IDE work on Ultrabook 170/200.
- Prevent PXE-booted i386 and amd64 machines from storing the MAC address in case root is supposed to be local disk instead of NFS.
-
- Replaced a few malloc() calls with calloc() for safety in top(1).
+
- Replaced a few malloc() calls with calloc() for safety in top(1).
- Make powernow-k7 code use the ACPI _PSS table for retrieving p_state data.
-
- Updated sudo(8) to 1.6.9p1. Note that environment handling differs from earlier versions.
+
- Updated sudo(8) to 1.6.9p1. Note that environment handling differs from earlier versions.
-
- Make it possible to show alternate routing tables in netstat(1).
+
- Make it possible to show alternate routing tables in netstat(1).
- Added an rc4_skip() function so you can discard bytes from the arc4 stream.
-
- Make wpi(4) use hardware WEP in the TX path.
+
- Make wpi(4) use hardware WEP in the TX path.
-
- Add rl(4), ssio(4) and its com(4) ports to hppa RAMDISK kernels.
+
- Add rl(4), ssio(4) and its com(4) ports to hppa RAMDISK kernels.
- Enable thread support in libobjc.
-
- Improvements in the cdce(4) driver, makes Sony Ericsson K610 and other devices work.
+
- Improvements in the cdce(4) driver, makes Sony Ericsson K610 and other devices work.
-
- In ospfd(8), display multipath routes in "ospfctl sh fib" output if they exist.
-
- Fix in make(1) where .for loops could give weird results.
-
- Enable rl(4) on hppa GENERIC kernels.
+
- In ospfd(8), display multipath routes in "ospfctl sh fib" output if they exist.
+
- Fix in make(1) where .for loops could give weird results.
+
- Enable rl(4) on hppa GENERIC kernels.
- Add 64 bit mips support to arla lwp code.
-
- Added sk(4) to hppa GENERIC and RAMDISK kernels.
+
- Added sk(4) to hppa GENERIC and RAMDISK kernels.
-
- Enable lcd(4) on hppa GENERIC kernels.
+
- Enable lcd(4) on hppa GENERIC kernels.
-
- Make sure pf(4) does not drop outgoing packets in case of a congested input queue.
+
- Make sure pf(4) does not drop outgoing packets in case of a congested input queue.
-
- Enable emu(4) on mips64 GENERIC.
+
- Enable emu(4) on mips64 GENERIC.
- Fix for hangs on i386 and hickups on mips64 when copying data out of /dev/audio with dd due to incorrect pointer advancement.
- Fix for mips64 ddb trap handling.
-
- Fix for re(4) MAC address reading out of the EEPROM for 9346 and 9356-based devices.
+
- Fix for re(4) MAC address reading out of the EEPROM for 9346 and 9356-based devices.
- Backported a gcc3 fix (cse_end_of_basic_block).
-
- Fix percentage computation of wrapping numbers in top(1).
+
- Fix percentage computation of wrapping numbers in top(1).
-
- Add a lcd(4) driver for the front panel LCD display found on the four-digit B/C/J-class hppa workstations.
+
- Add a lcd(4) driver for the front panel LCD display found on the four-digit B/C/J-class hppa workstations.
- Delay switching to the real serial console on hppa until we attach the serial device. Should make the second serial port on four-digit B/C/J-class machines work as console too.
-
- Make sigreturn(2) set the proper space ID for the instruction queue. Fixed some more pthreads regressions on hppa.
-
- Make sure encrypt(1) does not trim whitespace from stdin.
+
- Make sigreturn(2) set the proper space ID for the instruction queue. Fixed some more pthreads regressions on hppa.
+
- Make sure encrypt(1) does not trim whitespace from stdin.
- Fixes in delay constant calibration for mac68k on machines configured to use A/UX style interrupts.
-
- Add bge(4) to hppa GENERIC and RAMDISK kernels.
+
- Add bge(4) to hppa GENERIC and RAMDISK kernels.
- Various 802.11 fixes.
-
- Make the arc(4) driver use the full 64 bits when reporting sizes, now bioctl(8) shows the correct size for 2+TB volumes.
-
- Add FFS2 support to quotacheck(8).
+
- Make the arc(4) driver use the full 64 bits when reporting sizes, now bioctl(8) shows the correct size for 2+TB volumes.
+
- Add FFS2 support to quotacheck(8).
- Prevent division by zero in the disklabel code if argument values are bogus.
-
- Fix for emu(4) audio which was overriding the reqeusted encoding format.
-
- Upgraded the wpi(4) driver to handle the new 2.14.4 firmware. Do not forget to update the wpi-firmware package.
-
- Implement a -q option in bioctl(8) to query scsi disks for inquiry data like vendor, model, revision, serial # and so on.
+
- Fix for emu(4) audio which was overriding the reqeusted encoding format.
+
- Upgraded the wpi(4) driver to handle the new 2.14.4 firmware. Do not forget to update the wpi-firmware package.
+
- Implement a -q option in bioctl(8) to query scsi disks for inquiry data like vendor, model, revision, serial # and so on.
- Change SGI O2 LED behaviour so it is red in user mode and green while idling.
-
- SECURITY FIX: Fix potential heap overflow in file(1)
+ - SECURITY FIX: Fix potential heap overflow in file(1)
A source code patch is available.
[Applied to stable]
- - Reduce optimization when compiling growfs(8) on m68k to work around compiler code generation bug.
-
- Do not allow clustering reads for filesystem whose block size is smaller than the hardware page size. Fixes vnd(4) read problems on alpha and sparc64.
-
- Make the PPP printing in tcpdump(8) support IPv6.
+
- Reduce optimization when compiling growfs(8) on m68k to work around compiler code generation bug.
+
- Do not allow clustering reads for filesystem whose block size is smaller than the hardware page size. Fixes vnd(4) read problems on alpha and sparc64.
+
- Make the PPP printing in tcpdump(8) support IPv6.
-
- Various internal changes in make(1).
+
- Various internal changes in make(1).
-
- Enable "ifconfig -M" support for pcmcia based malo(4) devices.
-
- Make sure both pthreads(3) and rthreads report the correct stack size and top.
-
- Add support for Realtek ALC883 in azalia(4).
+
- Enable "ifconfig -M" support for pcmcia based malo(4) devices.
+
- Make sure both pthreads(3) and rthreads report the correct stack size and top.
+
- Add support for Realtek ALC883 in azalia(4).
- Thread fixes for hppa machines.
-
- Update growfs(8) to support FFS2.
+
- Update growfs(8) to support FFS2.
-
- Fix for using poll(2) on audio devices.
+
- Fix for using poll(2) on audio devices.
- Try harder on sparc64 to print the actual faulting address on SIGSEGV instead of the mmu tag word.
- Various 802.11 code improvements.
- Fix a really old bug in the socket code when passing M_NOWAIT to sblock().
- Fix for the SGI ddb disassembler printing code.
-
- sk(4) and skc(4) removed from first install floppy for i386.
-
- Add FFS2 support to quot(8).
-
- Removed the fe(4) driver.
+
- sk(4) and skc(4) removed from first install floppy for i386.
+
- Add FFS2 support to quot(8).
+
- Removed the fe(4) driver.
- Fix a "use after free" in the network interface code, when detaching an interface before it is removed from the multicast group.
-
- In pf(4), fix ICMP rdr/binat corruption.
-
- On hppa machines, mark ukbd(4) as console keyboard when appropriate.
+
- In pf(4), fix ICMP rdr/binat corruption.
+
- On hppa machines, mark ukbd(4) as console keyboard when appropriate.
-
- In ipsecctl(8), allow proto ESP/AH in flow specifications.
+
- In ipsecctl(8), allow proto ESP/AH in flow specifications.
- Fix memory leak in the kernel sensors code.
-
- In the tcpdump(8) 802.11 output routines, display payload for DS to DS and NO DS traffic.
-
- Add pciide(4) on jmb(4) for amd64, i386 and sparc64 GENERIC and RAMDISK kernels.
-
- Allow pciide(4) to attach to jmb(4) too.
+
- In the tcpdump(8) 802.11 output routines, display payload for DS to DS and NO DS traffic.
+
- Add pciide(4) on jmb(4) for amd64, i386 and sparc64 GENERIC and RAMDISK kernels.
+
- Allow pciide(4) to attach to jmb(4) too.
-
- Enable jmb(4) SATA on amd64, i386 and sparc64 GENERIC and RAMDISK kernels.
-
- Fix potential crash on ISA-based lm(4) sensors.
-
- Add gentbi(4) to sparc64 GENERIC kernels.
+
- Enable jmb(4) SATA on amd64, i386 and sparc64 GENERIC and RAMDISK kernels.
+
- Fix potential crash on ISA-based lm(4) sensors.
+
- Add gentbi(4) to sparc64 GENERIC kernels.
- On hppa machines, reset PDC devices before enabling iova space if not on a serial console. Makes glass console on four-digit B/C/J-class systems work.
-
- Make pfctl(8) accept "states" also, for the -s and -F options for consistency.
+
- Make pfctl(8) accept "states" also, for the -s and -F options for consistency.
- Bump the number of supported interrupt routing entries for hppa machines.
- Update libc to tz2007f code base.
-
- Add 802.11d command to the pcmcia malo(4) driver code.
+
- Add 802.11d command to the pcmcia malo(4) driver code.
-
- Fixes for timeouts in the ugen(4) driver.
-
- Make it easier in tcpdump(8) to spot which version of NFS the traffic is.
+
- Fixes for timeouts in the ugen(4) driver.
+
- Make it easier in tcpdump(8) to spot which version of NFS the traffic is.
-
- Add a SIGCHILD handler to identd(8) when running in background mode so it will not leave a zombie.
-
- Fix for netstat(1) due to the IPX removal.
+
- Add a SIGCHILD handler to identd(8) when running in background mode so it will not leave a zombie.
+
- Fix for netstat(1) due to the IPX removal.
-
- Add aliases "1" and "2" to "l" and "r" on sdiff(1) to make interactive merges easier.
-
- Make tcpdump(8) handle overlapping data on 64 bit arches when decapsulating packets.
+
- Add aliases "1" and "2" to "l" and "r" on sdiff(1) to make interactive merges easier.
+
- Make tcpdump(8) handle overlapping data on 64 bit arches when decapsulating packets.
- Fix for Intel errata AI91 in the i386 pmap handler code.
- Make OpenCVS handle updates regarding remote files which have been removed from the repository,
-
- Prevent checknr(1) from accepting zero-length strings for the -a and -c options, and fix a file descriptor leak.
-
- Enable newfs(8) to create FFS2 file systems larger than 1TB. Note, work still remains.
-
- On hppa, switch pciide(4) to native mode on ssio(4)-based machines.
-
- Division by zero fix in fortune(6) for empty input files.
-
- Fix for PC87415-equipped hppa machines in the pciide(4) code.
-
- Fix a race condition in the pfsync(4) code during ruleset reload.
+
- Prevent checknr(1) from accepting zero-length strings for the -a and -c options, and fix a file descriptor leak.
+
- Enable newfs(8) to create FFS2 file systems larger than 1TB. Note, work still remains.
+
- On hppa, switch pciide(4) to native mode on ssio(4)-based machines.
+
- Division by zero fix in fortune(6) for empty input files.
+
- Fix for PC87415-equipped hppa machines in the pciide(4) code.
+
- Fix a race condition in the pfsync(4) code during ruleset reload.
- Fixes in the vframe handling for i386 trap code.
-
- Make ath(4) devices use a O(log(N)) algorithm instead of O(N) for bit swaps.
-
- Alignment fixes to kue(4).
+
- Make ath(4) devices use a O(log(N)) algorithm instead of O(N) for bit swaps.
+
- Alignment fixes to kue(4).
-
- Fix buffer overflow in lam(1) by increasing the file descriptor limit to the correct limit.
+
- Fix buffer overflow in lam(1) by increasing the file descriptor limit to the correct limit.
- Rework the algorithm in scandir for estimating the number of directory entries.
- Add support for rlog to OpenCVS.
- Allow OpenCVS to ci -N<tag name> even when you have no changes, to match GNU behaviour.
-
- Make the lm(4) driver support early W83627EHF-A chips.
-
- Teach fsdb(8) and fsck_ffs(8) about 64-bit block addresses.
+
- Make the lm(4) driver support early W83627EHF-A chips.
+
- Teach fsdb(8) and fsck_ffs(8) about 64-bit block addresses.
- Crank the ifq_maxlen from 50 to 256, so it will match most interface rx rings.
-
- Make com(4) on ssio(4) on hppa attach as console when appropriate.
+
- Make com(4) on ssio(4) on hppa attach as console when appropriate.
-
- Make the scsi(4) midlayer handle disk sizes above 2^32-1.
-
- Expand disklabel(8) size/offset to 16 characters, and drop the Cyl comments.
-
- Removed the vr(4) driver from i386 install floppy C due to space restrictions.
-
- Make carp(4) use a masked destination network instead of the interface IP for the destination of the route belonging to the carp interface.
+
- Make the scsi(4) midlayer handle disk sizes above 2^32-1.
+
- Expand disklabel(8) size/offset to 16 characters, and drop the Cyl comments.
+
- Removed the vr(4) driver from i386 install floppy C due to space restrictions.
+
- Make carp(4) use a masked destination network instead of the interface IP for the destination of the route belonging to the carp interface.
- Update FFS1/2 time last written for cylinder groups in clusteralloc().
-
- Add PCI-based malo(4) to alpha GENERIC kernels.
+
- Add PCI-based malo(4) to alpha GENERIC kernels.
-
- Extend SGI bus_dma(9) to cope with different views of memory. Allows for more than 256M RAM again.
-
- For pfsync(4), reimplement interface bound states. Adds forwarding performance.
+
- Extend SGI bus_dma(9) to cope with different views of memory. Allows for more than 256M RAM again.
+
- For pfsync(4), reimplement interface bound states. Adds forwarding performance.
-
- Make tcpdump(8) print leading zeroes in MAC addresses.
-
- Fix case where a 4.2BSD partition falls partly within the area defined by the 'b' command in disklabel(8).
-
- Add lpt(4) at ssio(4) for hppa GENERIC kernels.
+
- Make tcpdump(8) print leading zeroes in MAC addresses.
+
- Fix case where a 4.2BSD partition falls partly within the area defined by the 'b' command in disklabel(8).
+
- Add lpt(4) at ssio(4) for hppa GENERIC kernels.
- On the SGI platform, make sure the IPL_CLOCK blocks device interrupts.
- Make NFS bail out if the READDIRPLUS option is set on a v2 mount, since it is a v3 option only.
-
- Make pf(4) allow "log" for NAT rules without "pass".
-
- Make pkg_add(1) deal gracefully with absent packing lists, to make it easier to recover from disk crashes that leave /var/db/pkg half empty.
+
- Make pf(4) allow "log" for NAT rules without "pass".
+
- Make pkg_add(1) deal gracefully with absent packing lists, to make it easier to recover from disk crashes that leave /var/db/pkg half empty.
-
- Add support for VIA CX700/VX700 IDE to the pciide(4) driver.
-
- Add Novatel ES620 to the list of supported umsm(4) devices.
-
- Add com(4) at ssio(4) for hppa GENERIC kernels.
-
- Add a ssio(4) driver for the PC87560 SuperIO chip on hppa.
-
- Add support in ospfd(8) for mapping route labels to AS-external route tags.
-
- Allow ospfd(8) reconfigurations through SIGHUP too.
-
- Ignore SIGHUP in bgpd(8) children to allow the use of "pkill -1 bgpd" for reloading.
+
- Add support for VIA CX700/VX700 IDE to the pciide(4) driver.
+
- Add Novatel ES620 to the list of supported umsm(4) devices.
+
- Add com(4) at ssio(4) for hppa GENERIC kernels.
+
- Add a ssio(4) driver for the PC87560 SuperIO chip on hppa.
+
- Add support in ospfd(8) for mapping route labels to AS-external route tags.
+
- Allow ospfd(8) reconfigurations through SIGHUP too.
+
- Ignore SIGHUP in bgpd(8) children to allow the use of "pkill -1 bgpd" for reloading.
- Fix in the i386 pmap code for a possible AMD bug, which slightly speeds up TLB misses.
-
- Make ifconfig(8) accept IPv6 addresses that use CIDR notation.
+
- Make ifconfig(8) accept IPv6 addresses that use CIDR notation.
-
- Prevent spin in ssh(1) by using poll() if the file descriptor is non blocking.
-
- Handle azalia(4) interrupts for the record stream as well. Recording now works.
+
- Prevent spin in ssh(1) by using poll() if the file descriptor is non blocking.
+
- Handle azalia(4) interrupts for the record stream as well. Recording now works.
- Disable memory above 256M on SGI machines for now, it triggers bugs as it is.
- Make sure alpha (or SRM) designs accept level 3 interrupts for I/O, instead of the more commonly encountered level 4.
- Simplified disklabel infrastructure, MBR handling is now machine independent to simplify hotplug media on most architectures.
-
- Lots of internal work on package(5) tools.
+
- Lots of internal work on package(5) tools.
-
- Implement a 'keep-alive' option to ftp(1) that sends NOOPs over an inactive connection.
-
- Enable iophy(4) for fxp(4) on hppa GENERIC and RAMDISK kernels.
-
- Make gcc(1) regard INTMAX_TYPE and UINTMAX_TYPE as long long always, regardless of the size of a long.
-
- Fix in dump(8) to prevent access to the wrong blocks.
-
- Merge xterm(1) code with version 225.
+
- Implement a 'keep-alive' option to ftp(1) that sends NOOPs over an inactive connection.
+
- Enable iophy(4) for fxp(4) on hppa GENERIC and RAMDISK kernels.
+
- Make gcc(1) regard INTMAX_TYPE and UINTMAX_TYPE as long long always, regardless of the size of a long.
+
- Fix in dump(8) to prevent access to the wrong blocks.
+
- Merge xterm(1) code with version 225.
- Drop the current random timestamps and ISN generation code for TCP and replace both with a RFC1948 based method so TCP clients now have monotonic ISN/timestamps.
-
- Make systrace(1) keep trailing slashes in path normalization, as they might result in errors otherwise hidden by systrace.
-
- Fix crash in pf(4) where a IPv4 packet labeled with IPPROTO_ICMPV6 would be incorrectly handled.
+
- Make systrace(1) keep trailing slashes in path normalization, as they might result in errors otherwise hidden by systrace.
+
- Fix crash in pf(4) where a IPv4 packet labeled with IPPROTO_ICMPV6 would be incorrectly handled.
-
- Fixed a panic in the vic(4) driver.
-
- Make sure netstat(1) does not truncate long interface names.
+
- Fixed a panic in the vic(4) driver.
+
- Make sure netstat(1) does not truncate long interface names.
- Update time zone data files to tzdata2007f.
-
- Add "rtlabel" option to ifconfig(8).
-
- Make tcpdump(8) print BGP communities in a nicer format.
+
- Add "rtlabel" option to ifconfig(8).
+
- Make tcpdump(8) print BGP communities in a nicer format.
- Make the pfsync code compile if you remove the kernel IPSEC option.
- Various enhancements in the disklabel handling code.
- Swap xOrigin and yOrigin in the XRender rectangle clipping code.
-
- Fix crash on shutdown in ospfd(8) in the vertex removal code.
-
- Make ospfd(8) ignore updates that do not change the route.
-
- Enable cookie support in ftp(1).
-
- Allow IPv4 addresses be specified in ifconfig(8) with CIDR notation.
+
- Fix crash on shutdown in ospfd(8) in the vertex removal code.
+
- Make ospfd(8) ignore updates that do not change the route.
+
- Enable cookie support in ftp(1).
+
- Allow IPv4 addresses be specified in ifconfig(8) with CIDR notation.
-
- Make azalia(4) support the Macbook, Macbook Pro, Mac Mini and possibly the iMac.
+
- Make azalia(4) support the Macbook, Macbook Pro, Mac Mini and possibly the iMac.
- Switch macppc to the interactive bootloader.
-
- Fix a 10-year old bug in make(1) which was causing it to spin if given large -j values.
-
- Add -K flag to ssh(1) to set GSSAPIAuthentication=Yes and GSSAPIDelegateCredentials=Yes.
-
- Fix slave exit value in ssh(1) when control master goes away without passing the full exit status.
-
- Make scp(1) try to skip FIFOs rather than blocking when nothing is listening to the other end of the socket.
+
- Fix a 10-year old bug in make(1) which was causing it to spin if given large -j values.
+
- Add -K flag to ssh(1) to set GSSAPIAuthentication=Yes and GSSAPIDelegateCredentials=Yes.
+
- Fix slave exit value in ssh(1) when control master goes away without passing the full exit status.
+
- Make scp(1) try to skip FIFOs rather than blocking when nothing is listening to the other end of the socket.
-
- In rcs(1), allow checkin without locking (after rcs -U).
-
- In ospfd(8), when removing AS-EXT LSA, initialise the metric to a sane default.
-
- Make dump(8) store old_atime and old_mtime too, when dumping FFS1 file systems.
-
- Make ssh(1) send "window adjust" messages every three packets, and do not wait until 50% of the window is consumed.
+
- In rcs(1), allow checkin without locking (after rcs -U).
+
- In ospfd(8), when removing AS-EXT LSA, initialise the metric to a sane default.
+
- Make dump(8) store old_atime and old_mtime too, when dumping FFS1 file systems.
+
- Make ssh(1) send "window adjust" messages every three packets, and do not wait until 50% of the window is consumed.
-
- Make top(1) clear to end of line at quit, needed for terminals that do not restore content on quitting curses mode.
+
- Make top(1) clear to end of line at quit, needed for terminals that do not restore content on quitting curses mode.
-
- Enable re(4) at cardbus for macppc GENERIC kernels.
-
- Fix in pf(4) regarding pflog(4).
-
- Better handling of old libraries in pkg_add(1).
+
- Enable re(4) at cardbus for macppc GENERIC kernels.
+
- Fix in pf(4) regarding pflog(4).
+
- Better handling of old libraries in pkg_add(1).
- Update the "nv" driver in X.Org to xf86-video-nv 2.0.2. Adds new chipset support.
-
- Make disklabel(8) aware of new fields in the labels, allowing for larger than 2T disks, partitions and offsets.
-
- In rcs(1), if strict locking is disabled, make file writable on checkout.
-
- Add support in puc(4) for Digi Neo 8-port serial adapter.
+
- Make disklabel(8) aware of new fields in the labels, allowing for larger than 2T disks, partitions and offsets.
+
- In rcs(1), if strict locking is disabled, make file writable on checkout.
+
- Add support in puc(4) for Digi Neo 8-port serial adapter.
- Fixed memory corruption bug in the X.Org i810 driver.
-
- New MAC algorithm available for data integrity in ssh(1), UMAC-64. About 20% faster than HMAC-MD5.
-
- Fix for pfioctl() panics from the state - state key split in pf(4).
-
- Enable reload support in hoststated(8) for layer-3 configurations.
+
- New MAC algorithm available for data integrity in ssh(1), UMAC-64. About 20% faster than HMAC-MD5.
+
- Fix for pfioctl() panics from the state - state key split in pf(4).
+
- Enable reload support in hoststated(8) for layer-3 configurations.
-
- Fix cylinder rounding calculation in disklabel(8) for those who wants to use all space.
-
- Fix for vlan(4) to handle reconfigurations better.
+
- Fix cylinder rounding calculation in disklabel(8) for those who wants to use all space.
+
- Fix for vlan(4) to handle reconfigurations better.
- Make the USB hub output shorter in the dmesg.
-
- Make rm(1) unlink files with multiple links when using -P.
-
- Major wpi(4) update, be sure to update the firmware file.
+
- Make rm(1) unlink files with multiple links when using -P.
+
- Major wpi(4) update, be sure to update the firmware file.
- Big changes to libc and libpthread, various fixes and cleanups.
-
- Make ssh(1) preserve context between packets, saving 2 hash calls per packet. Gives some 12-16% speedup for arcfour256/hmac-md5.
-
- Enable channel switching on pcmcia malo(4).
-
- On cold-start panics, make ddb(4) print out a few lines of backtrace, since the glass console might not work at this stage.
-
- Various internal package(5) improvements.
+
- Make ssh(1) preserve context between packets, saving 2 hash calls per packet. Gives some 12-16% speedup for arcfour256/hmac-md5.
+
- Enable channel switching on pcmcia malo(4).
+
- On cold-start panics, make ddb(4) print out a few lines of backtrace, since the glass console might not work at this stage.
+
- Various internal package(5) improvements.
- Removed IPX support.
-
- Unbreak tcpdump(8) 802.11 element parsing by using the TCHECK2 macro correctly.
-
- Fix for apmd(8) when using auto-adjust modes. Cycle through 0 and 100 to make sure we are in a known state when starting up.
-
- Make malo(4) RX path work on big endian machines too.
-
- Add FFS2 support to dump(8) and restore(8).
+
- Unbreak tcpdump(8) 802.11 element parsing by using the TCHECK2 macro correctly.
+
- Fix for apmd(8) when using auto-adjust modes. Cycle through 0 and 100 to make sure we are in a known state when starting up.
+
- Make malo(4) RX path work on big endian machines too.
+
- Add FFS2 support to dump(8) and restore(8).
- Add a check for Intel Core CPUs with Scalable Bus Speed of 200 MHz.
-
- Add support for ICH8M IDE in the pciide(4) driver.
-
- Fix ssh(1) memory leak on error path.
+
- Add support for ICH8M IDE in the pciide(4) driver.
+
- Fix ssh(1) memory leak on error path.
- Fix in the parser code for OpenCVS remote merging.
-
- Enabled softraid(4) in GENERIC so people can test. Work in progress.
-
- Add RX path to malo(4) and enable monitor mode.
+
- Enabled softraid(4) in GENERIC so people can test. Work in progress.
+
- Add RX path to malo(4) and enable monitor mode.
- Add infrastructure to allow hppa to have root on wd0.
-
- Add Gude Export mouseCLOCK to the list of supported udcf(4) devices.
+
- Add Gude Export mouseCLOCK to the list of supported udcf(4) devices.
- Fix for some Pentium 4 machines running in 64-bit mode and have EST, but with a different MSR.
-
- Add paranoid snprintf calculation to avoid possible overflow in SSL session ID parsing in httpd(8).
-
- In disklabel(8), add RAID to the list of partition types for which we do not prompt for a filesystem.
+
- Add paranoid snprintf calculation to avoid possible overflow in SSL session ID parsing in httpd(8).
+
- In disklabel(8), add RAID to the list of partition types for which we do not prompt for a filesystem.
- In OpenCVS, add support for local and remote branch checkout.
- Make the VFS layer not request zeroed memory when allocating data regions for buffers. Saves a lot of memset calls when doing heavy I/O.
-
- Establish interrupts for xlights(4) after checking the i2s subsystem, fixes a problem with Xserve G5.
+
- Establish interrupts for xlights(4) after checking the i2s subsystem, fixes a problem with Xserve G5.
- Removed support for mounting AmigaDOS filesystems.
-
- Fix for bogus PHYs seen on Marvell Yukon 88E8036 msk(4) devices.
+
- Fix for bogus PHYs seen on Marvell Yukon 88E8036 msk(4) devices.
- Apply the "skip ipsec if there are no flows" to IPv6 too.
- Add Intel pchb RND device support to amd64, same as i386 earlier.
- Add Bluetooth drivers to GENERIC, not enabled yet.
- All NFSv2 client to retry when getting ESTALE from the server, matches NFSv3 behaviour.
- Add more PCI IDs to the list of pchb chipsets with a randomness source.
-
- Make ksh(1) only process ENV when in interactive mode.
-
- Fix in spamdb(8), prevents corrupt database if given an empty spamtrap address.
-
- In softraid(4), fix redundancy for RAID 1.
-
- Initial driver for the Myricom Myri-10G Lanai-Z8E 10GE driver, myx(4). Not working yet.
+
- Make ksh(1) only process ENV when in interactive mode.
+
- Fix in spamdb(8), prevents corrupt database if given an empty spamtrap address.
+
- In softraid(4), fix redundancy for RAID 1.
+
- Initial driver for the Myricom Myri-10G Lanai-Z8E 10GE driver, myx(4). Not working yet.
- Make PowerNow-K8 on amd64 and i386 use the _PSS object from ACPI to retrieve p_state data.
-
- Make bgpd(8) check the AS community number so nobody uses 65535.
-
- Add Gunze USB Touch panel to the list of supported uts(4) devices.
-
- Prevent autonegotiation with every address change on em(4) by only calling em_init if IFF_UP is set.
-
- Bring em(4) flow control delay timer down to what it should be. Increases throughput.
+
- Make bgpd(8) check the AS community number so nobody uses 65535.
+
- Add Gunze USB Touch panel to the list of supported uts(4) devices.
+
- Prevent autonegotiation with every address change on em(4) by only calling em_init if IFF_UP is set.
+
- Bring em(4) flow control delay timer down to what it should be. Increases throughput.
- Extend the Sun disklabel format to contain filesystem types. Allows for creation of raid partitions.
-
- Add basic support for crypto(9) backed RAID C discipline in softraid(4).
-
- Various package(5) tools improvements.
+
- Add basic support for crypto(9) backed RAID C discipline in softraid(4).
+
- Various package(5) tools improvements.
-
- Major update to sensorsd(8). Smart sensors that provide status by themselves are automatically monitored and make WARN, CRITICAL and UNKNOWN statuses not being considered the same.
+
- Major update to sensorsd(8). Smart sensors that provide status by themselves are automatically monitored and make WARN, CRITICAL and UNKNOWN statuses not being considered the same.
- Import parts of the NetBSD bluetooth stack.
-
- Make xlights(4) probe correctly on Xserve G5.
+
- Make xlights(4) probe correctly on Xserve G5.
- Fixes for the i386 and amd64 ELF32/ELF64 code. Allows i386 and amd64 boot blocks to boot both ELF32 and ELF64 kernels.
-
- Add new kevent(2) filter type for timers, allows processes to create a series of oneshot or periodic timers.
+
- Add new kevent(2) filter type for timers, allows processes to create a series of oneshot or periodic timers.
- Window fixes for cwm in the xenocara codebase.
-
- Add demote support to ospfd(8), makes carp setups with ospfd(8) more reliable.
-
- Fix for rip code in cdio(1) so it gets the size of the current track instead of the previous track.
+
- Add demote support to ospfd(8), makes carp setups with ospfd(8) more reliable.
+
- Fix for rip code in cdio(1) so it gets the size of the current track instead of the previous track.
- Add support for CPU temperature sensors on Intel Core CPUs.
- When forcibly mounting dirty filesystems, do not clear the "unclean" flag.
-
- In hoststated(8), make sure relay processes do not start unless L7 balancing is needed.
+
- In hoststated(8), make sure relay processes do not start unless L7 balancing is needed.
- Remove Token Ring support from the networking code.
- Removed support for 80386 processors in the i386 platform code. 486 or better required from now on.
- Another performance improvement in the networking code by skipping ipsec tag checks if there are no ipsec flows.
-
- Add new check method to hoststated(8) which allow to run external scripts/programs for custom evaluations.
-
- Fix race in softraid(4) sync code.
+
- Add new check method to hoststated(8) which allow to run external scripts/programs for custom evaluations.
+
- Fix race in softraid(4) sync code.
- Added workarounds in the SHM code, fixes current opera with SHM.
- Make i386 machines with APM not attach ACPI by default.
- Improvements in the amd64 EST code for intel CPUs and support for CPU temperature sensors.
-
- Update disklabel(8) format to support larger disks and partitions.
+
- Update disklabel(8) format to support larger disks and partitions.
-
- Make ldd(1) able to print dynamic linking information on libraries themselves.
+
- Make ldd(1) able to print dynamic linking information on libraries themselves.
- New driver for the Sparc v215/245 front panel LEDs added to sparc64 GENERIC.
-
- 64-bit fixes in the softraid(4) code.
-
- Move top(1) to use curses instead of hand-crafted redraws.
-
- Another pf(4) speed improvement. Delay packet checksumming in the PF code until we are sure we need to send RST/ICMP error messages back, and only do it then.
-
- Allow set-uid binaries to dump core into /var/crash if the sysctl(8) kern.nosuidcoredump is set to 2.
+
- 64-bit fixes in the softraid(4) code.
+
- Move top(1) to use curses instead of hand-crafted redraws.
+
- Another pf(4) speed improvement. Delay packet checksumming in the PF code until we are sure we need to send RST/ICMP error messages back, and only do it then.
+
- Allow set-uid binaries to dump core into /var/crash if the sysctl(8) kern.nosuidcoredump is set to 2.
- Remove support in boot for the long list of different kernel names to look for.
- Removed unmaintained COMPAT_NETBSD code.
-
- For fxp(4), nudge the interrupt coalescing timeout to 128 ms. Lessens the interrupt load on busy fxp(4) cards a lot.
-
- Small steps towards hoststated(8) reloads.
-
- Fixes for the softraid(4) disk assembly code. Not usable yet.
+
- For fxp(4), nudge the interrupt coalescing timeout to 128 ms. Lessens the interrupt load on busy fxp(4) cards a lot.
+
- Small steps towards hoststated(8) reloads.
+
- Fixes for the softraid(4) disk assembly code. Not usable yet.
- Improvement in the memory pool handling code, removing time from the pool header leads to better packet rates.
-
- Add a global-wd-mode command to mg(1), which toggles between the current and the old behavior of one global working directory.
-
- Enable interrupt holdoff on DP83816 sis(4) chips. Significantly improves performance of such devices under load.
-
- Allow bgpd(8) to match on communities using 0 in the AS path.
-
- Large performance improvement for pf(4) by keeping information previously stored in a mbuf tag in the mbuf header directly.
+
- Add a global-wd-mode command to mg(1), which toggles between the current and the old behavior of one global working directory.
+
- Enable interrupt holdoff on DP83816 sis(4) chips. Significantly improves performance of such devices under load.
+
- Allow bgpd(8) to match on communities using 0 in the AS path.
+
- Large performance improvement for pf(4) by keeping information previously stored in a mbuf tag in the mbuf header directly.
- Fix for sparc64 machine dependent code for autoconf, fixes panics seen on Sun v215 machines.
-
- Add pcn(4) to the macppc GENERIC and RAMDISK kernels.
+
- Add pcn(4) to the macppc GENERIC and RAMDISK kernels.
- Make the internal random pool seed only from network interrupts, not once per packet due to drivers using interrupt mitigation more now.
-
- Remove support for the old Archive/Wangtek cartridge tape driver, wt(4).
-
- Lots of internal work on the various package(5) utilities.
+
- Remove support for the old Archive/Wangtek cartridge tape driver, wt(4).
+
- Lots of internal work on the various package(5) utilities.
- Clean up NFS and the nfssvc() system call, and remove old non-working kerberos code.
-
- Second step of making hoststated(8) reload checked in.
-
- Allow hoststated(8) to specify table templates in the configuration file and to inherit them from multiple services or relays.
-
- Completely rewritten ips(4) driver.
-
- On hppa, dynamically allocate IRQs for PCI devices on elroy(4).
-
- Enable ips(4) on amd64 GENERIC kernels.
-
- Make pcmcia-based malo(4) devices work on big endian arches too.
-
- Add additional truncation checks in tcpdump(8) when parsing and printing bgp packets.
+
- Second step of making hoststated(8) reload checked in.
+
- Allow hoststated(8) to specify table templates in the configuration file and to inherit them from multiple services or relays.
+
- Completely rewritten ips(4) driver.
+
- On hppa, dynamically allocate IRQs for PCI devices on elroy(4).
+
- Enable ips(4) on amd64 GENERIC kernels.
+
- Make pcmcia-based malo(4) devices work on big endian arches too.
+
- Add additional truncation checks in tcpdump(8) when parsing and printing bgp packets.
- Fix off-by-one in i386 bounce buffer allocator code.
-
- Fix off-by-one error in the cvs(1) server code.
-
- Link mount_vnd(8) to the build scripts, and make usr/sbin/vnconfig a link pointing to it.
-
- Add tht(4) to sparc64 GENERIC kernels.
+
- Fix off-by-one error in the cvs(1) server code.
+
- Link mount_vnd(8) to the build scripts, and make usr/sbin/vnconfig a link pointing to it.
+
- Add tht(4) to sparc64 GENERIC kernels.
- Add dynamic buffer cache to all platforms, instead of fixed amount of pages.
-
- First steps to implementing reload support in hoststated(8).
-
- Enable bio(4) on all platforms.
-
- Initial import of a che(4) driver for Chelsio 10GE ethernet cards.
+
- First steps to implementing reload support in hoststated(8).
+
- Enable bio(4) on all platforms.
+
- Initial import of a che(4) driver for Chelsio 10GE ethernet cards.
- Add support in X11 to use the "W" axis for mouse and input devices.
-
- Add re(4) to the sparc64 RAMDISK kernel.
+
- Add re(4) to the sparc64 RAMDISK kernel.
- Fix for macppc machines which boot off 2940 scsi disks.
-
- Make mount_vnd a C program, in order to completely replace vnconfig(8) in the future.
-
- Add cdrip and cdplay commands to cdio(1).
+
- Make mount_vnd a C program, in order to completely replace vnconfig(8) in the future.
+
- Add cdrip and cdplay commands to cdio(1).
- Protect against races in rthreads code when initializing mutexes.
-
- Remove y2k hack in date(1), if no century is specified, use this one.
-
- Make cron(8) handle SIGPIPE when writing to sendmail, allows cron(8) to run jobs when sendmail is missing or broken and will log a warning instead.
+
- Remove y2k hack in date(1), if no century is specified, use this one.
+
- Make cron(8) handle SIGPIPE when writing to sendmail, allows cron(8) to run jobs when sendmail is missing or broken and will log a warning instead.
- Rework TLB shootdown code for i386 and amd64, gives fairly large speed improvements.
- Added skeleton implementation of Xwscons, a kdrive based X server for wscons dumb framebuffer mode.
-
- Sanity check the time spec for touch(1), and if no century is specified, use this one.
+
- Sanity check the time spec for touch(1), and if no century is specified, use this one.
-
- Initial driver for Marvell 88W8385 PCMCIA malo(4) device.
-
- Add support for W83627DHG hardware monitors chipsets in the lm(4) driver.
+
- Initial driver for Marvell 88W8385 PCMCIA malo(4) device.
+
- Add support for W83627DHG hardware monitors chipsets in the lm(4) driver.
- Fix integer overflow in the freetype lib for xenocara X11.
- Improved partitioning and installation procedure for macppcs machines.
-
- Make at(1) default to this century if not specified.
-
- Add ZD1211B-based Edimax EW-7317LDG Wireless Detector / USB Adaptor to the list of supported zyd(4) devices.
+
- Make at(1) default to this century if not specified.
+
- Add ZD1211B-based Edimax EW-7317LDG Wireless Detector / USB Adaptor to the list of supported zyd(4) devices.
- Add code to spin up secondary CPUs on macppc, still work in progress.
- Change dmesg printing of memory to MB instead of KB.
-
- Enabled elroy(4) on hppa GENERIC and RAMDISK kernels.
-
- Fix in pf(4) for pppoe f_addrhook panics.
+
- Enabled elroy(4) on hppa GENERIC and RAMDISK kernels.
+
- Fix in pf(4) for pppoe f_addrhook panics.
-
- Add BCM5709 SerDes to the list of bnx(4) devices. Disabled for now.
-
- Add pciide(4) support to hppa GENERIC and RAMDISK kernels.
-
- Prevent newly created interfaces from causing reload problems in ospfd(8).
-
- In bgpd(8), only try to merge an AS_SEQUENCE if there is a difference between the 4-byte AS path and the 2-byte one. If they are the same length, just use the new path instead of trying to merge.
+
- Add BCM5709 SerDes to the list of bnx(4) devices. Disabled for now.
+
- Add pciide(4) support to hppa GENERIC and RAMDISK kernels.
+
- Prevent newly created interfaces from causing reload problems in ospfd(8).
+
- In bgpd(8), only try to merge an AS_SEQUENCE if there is a difference between the 4-byte AS path and the 2-byte one. If they are the same length, just use the new path instead of trying to merge.
- On TCP input when a partial ACK is received, check if congestion window is larger than acked bytes and update the window accordingly.
-
- Make Logitech Quickcam Notebook attach to ugen(4) and not uaudio(4).
-
- Enable uts(4) - USB touchscreen support on amd64 and i386 GENERIC kernels.
-
- Add support for bluetooth adapter found on MSI S270 laptops in the ubt(4) driver.
+
- Make Logitech Quickcam Notebook attach to ugen(4) and not uaudio(4).
+
- Enable uts(4) - USB touchscreen support on amd64 and i386 GENERIC kernels.
+
- Add support for bluetooth adapter found on MSI S270 laptops in the ubt(4) driver.
- Add support for hppa 8700/pcvw2 CPUs.
- Ask hppa firmware for reset before trying ourselves, needed for four-digit b/c/j hppa models.
- Improved i386 and amd64 PCI interrupt code to handle several levels of PCI-PCI bridges, fixes mapping for devices that sit behind two such bridges and the firmware only provides mapping for the first.
-
- Add msk(4) to hppa GENERIC and RAMDISK kernels.
-
- Initial driver for the hppa astro(4) and elroy(4) chips.
-
- Add FFS2 support to ncheck_ffs(8) and clri(8).
-
- Make bridge(4) mark packets with M_PROTO1 if gif(4) needs to use etherip encapsulation. Unbreaks remote ipsec bridges.
+
- Add msk(4) to hppa GENERIC and RAMDISK kernels.
+
- Initial driver for the hppa astro(4) and elroy(4) chips.
+
- Add FFS2 support to ncheck_ffs(8) and clri(8).
+
- Make bridge(4) mark packets with M_PROTO1 if gif(4) needs to use etherip encapsulation. Unbreaks remote ipsec bridges.
-
- Handle extra open events in sppp(4) due to timeouts/retransmissions.
-
- Add -f option to wsconsctl(8), to specify alternative control devices.
-
- Added xtsscale(1), used to calibrate uts(4) touchscreens.
+
- Handle extra open events in sppp(4) due to timeouts/retransmissions.
+
- Add -f option to wsconsctl(8), to specify alternative control devices.
+
- Added xtsscale(1), used to calibrate uts(4) touchscreens.
-
- Add support for zmore(1) to be called as zless(1) too.
-
- Add em(4) to hppa RAMDISK kernels.
+
- Add support for zmore(1) to be called as zless(1) too.
+
- Add em(4) to hppa RAMDISK kernels.
- Kernel option added for PCIAGP on amd64 which lets i945 chipsets work, but disabled for now.
-
- Add aps(4) to amd64 GENERIC kernels.
+
- Add aps(4) to amd64 GENERIC kernels.
- Add a GENERIC.MP configuration for mvme88k, not usable yet.
-
- Add xl(4) to hppa GENERIC and RAMDISK kernels.
-
- Make xl(4) have a brief pause after reset for PIO too.
-
- Add support for kernel crash(8) dumps for arm-based platforms, with minimal support in libkvm.
+
- Add xl(4) to hppa GENERIC and RAMDISK kernels.
+
- Make xl(4) have a brief pause after reset for PIO too.
+
- Add support for kernel crash(8) dumps for arm-based platforms, with minimal support in libkvm.
-
- In newfs(8), do a bounds check to see if the inode table fits on the disk, prevents core dumps on really small filesystems.
-
- Lots of work on package(5) tools, mostly internally visible.
+
- In newfs(8), do a bounds check to see if the inode table fits on the disk, prevents core dumps on really small filesystems.
+
- Lots of work on package(5) tools, mostly internally visible.
-
- Fall back to gethostname() on ssh(1) when outgoing connection is not on a socket, as in the case when ProxyCommand is used.
+
- Fall back to gethostname() on ssh(1) when outgoing connection is not on a socket, as in the case when ProxyCommand is used.
- Limit buffer cache memory to 30% on hppa machines.
-
- Make sftp-server(8) stop reading and processing commands when buffers get nearly full so it doesn't get into a fatal() error later.
-
- In install(1), allow stripping of files even if the destination filename starts with a dash.
+
- Make sftp-server(8) stop reading and processing commands when buffers get nearly full so it doesn't get into a fatal() error later.
+
- In install(1), allow stripping of files even if the destination filename starts with a dash.
-
- Removed unused catman(8).
-
- Update the ifp of bridge cache entries if the entry is not static. This makes carp(4) fail-over work over bridge(4).
-
- In systrace(1), do not assume 4-byte alignment of memory when intercepting a string.
-
- Fix in bgpd(8) printconf for peers with the 'down' flag set.
-
- Wait for the correct fd for dhcpd(8).
+
- Removed unused catman(8).
+
- Update the ifp of bridge cache entries if the entry is not static. This makes carp(4) fail-over work over bridge(4).
+
- In systrace(1), do not assume 4-byte alignment of memory when intercepting a string.
+
- Fix in bgpd(8) printconf for peers with the 'down' flag set.
+
- Wait for the correct fd for dhcpd(8).
- Improve dmesg output from setroot() so "rootdev=0x400 rrootdev=0xd00 rawdev=0xd02" becomes "root on sd0a swap on sd0b dump on sd0b".
-
- Initial code for a sli(4) driver for Emulex Fibre Channel controllers.
-
- Fix for msk(4) on MP systems, could cause reboots on heavily used machines.
-
- More package(5) improvements.
+
- Initial code for a sli(4) driver for Emulex Fibre Channel controllers.
+
- Fix for msk(4) on MP systems, could cause reboots on heavily used machines.
+
- More package(5) improvements.
- Enable PowerNow on amd64 processors running MP kernels.
-
- Prevent core dumps in tip(1) if strpbrk() returns NULL.
-
- Fix for Yukon-2 based msk(4) cards, by taking alignment restrictions into account when setting up RAM buffer addresses. Makes FE chips work reliably.
-
- Various internal improvements on the package(5) tools.
+
- Prevent core dumps in tip(1) if strpbrk() returns NULL.
+
- Fix for Yukon-2 based msk(4) cards, by taking alignment restrictions into account when setting up RAM buffer addresses. Makes FE chips work reliably.
+
- Various internal improvements on the package(5) tools.
- Disable xenocara OpenGL on vax and sgi platforms, and Xprt on vax and landisk. Makes xenocara build on vax now.
-
- Fix in fsck_ffs(8) for the fifth pass, make sure we do not end up with a partially initialized info struct.
+
- Fix in fsck_ffs(8) for the fifth pass, make sure we do not end up with a partially initialized info struct.
-
- Make sure reboot(8) doesn't try to power off some machines.
-
- Fix in pciide(4) when receiving unexpected interrupts. Fixes cdrom hangs on sparc64.
+
- Make sure reboot(8) doesn't try to power off some machines.
+
- Fix in pciide(4) when receiving unexpected interrupts. Fixes cdrom hangs on sparc64.
-
- Fix potential NULL dereference in hoststated(8).
+
- Fix potential NULL dereference in hoststated(8).
- Make IPv6 kill all packets with the RT Header type 0 extension or multiple routing headers.
-
- Make pf(4) drop all routing header packets too, unless the matching rule explicitly specifies 'allow-opts'.
-
- Make each pointer/mouse device under wscons(4) have its own calibration values.
-
- Rework ami(4) timeouts to handle the fact that they have no mechanism to take commands off them once submitted.
-
- Disable loadable font modules for Xorg(1) on static-only arches.
+
- Make pf(4) drop all routing header packets too, unless the matching rule explicitly specifies 'allow-opts'.
+
- Make each pointer/mouse device under wscons(4) have its own calibration values.
+
- Rework ami(4) timeouts to handle the fact that they have no mechanism to take commands off them once submitted.
+
- Disable loadable font modules for Xorg(1) on static-only arches.
- Fix for mips64 when receiving hardware interrupts while CPU is in usermode.
-
- Add POSIX compliant -g option to ls(1).
-
- Bump isakmpd(8) crypto buffer logging to level 70 from 30.
-
- Make sure all Phase 1 negotiation failures are logged in isakmpd(8).
+
- Add POSIX compliant -g option to ls(1).
+
- Bump isakmpd(8) crypto buffer logging to level 70 from 30.
+
- Make sure all Phase 1 negotiation failures are logged in isakmpd(8).
- Lots of internal work on the various pkg_* utilities.
-
- Plug realloc memory leaks in cap_mkdb(1).
-
- Make tcpdump(8) not fail on non-RH0 routing headers.
-
- Fix SEGV in tcpdump(8) when parsing IPv6 packets with unknown or corrupted header options.
+
- Plug realloc memory leaks in cap_mkdb(1).
+
- Make tcpdump(8) not fail on non-RH0 routing headers.
+
- Fix SEGV in tcpdump(8) when parsing IPv6 packets with unknown or corrupted header options.
- Add multiprocessor aware setperf mechanism to amd64.
-
- Add support for FFS2 in dumpfs(8), and add -m flag to output newfs(8)-style commands to make a filesystem with the same settings.
-
- Provide hook in ld.so(1) so rthreads can spinlock to protect from races.
+
- Add support for FFS2 in dumpfs(8), and add -m flag to output newfs(8)-style commands to make a filesystem with the same settings.
+
- Provide hook in ld.so(1) so rthreads can spinlock to protect from races.
-
- Increase number of TX and RX descriptors in tht(4) from 64 to 128 and make tht(4) use TX checksumming in hardware.
+
- Increase number of TX and RX descriptors in tht(4) from 64 to 128 and make tht(4) use TX checksumming in hardware.
- Removed unused strcpy and strcat calls from kernel.
-
- Make carp(4) routing table modification attempts exhibit routing messages to not confuse userland routing daemons.
+
- Make carp(4) routing table modification attempts exhibit routing messages to not confuse userland routing daemons.
- Stop shipping CKSUM files for releases.
- Move the setroot() for all arches to a clean machine-independent version.
-
- Fixes for the vic(4) device.
-
- Add config(8) file for macppc MP kernels. Not working yet.
-
- Fix a panic on tun(4) on trunk(4) if ioctl() is called with uninitialized ifreq.
+
- Fixes for the vic(4) device.
+
- Add config(8) file for macppc MP kernels. Not working yet.
+
- Fix a panic on tun(4) on trunk(4) if ioctl() is called with uninitialized ifreq.
- Enable support for more than 512M of RAM on mips64-based machines.
- Reduce the IPv6 header nest limit from 50 to 10.
-
- Enable fast channel switching for malo(4) devices, makes apps like kismet happy.
-
- Fix in azalia(4) for a bug that prevented full device names from being printed.
-
- Fix in bge(4) for BCM5754/5787-based devices.
+
- Enable fast channel switching for malo(4) devices, makes apps like kismet happy.
+
- Fix in azalia(4) for a bug that prevented full device names from being printed.
+
- Fix in bge(4) for BCM5754/5787-based devices.
-
- Support for mtrr(4) on AMD Opteron CPUs.
-
- Add event handler to the azalia(4) code to mute/unmute based on headphone presence. Also some fixes while there.
-
- Add FFS2 support to tunefs(8).
-
- STABILITY FIX: Fix a divide-by-zero in Xorg(1) which can be triggered by a malicious client.
+ - Support for mtrr(4) on AMD Opteron CPUs.
+
- Add event handler to the azalia(4) code to mute/unmute based on headphone presence. Also some fixes while there.
+
- Add FFS2 support to tunefs(8).
+
- STABILITY FIX: Fix a divide-by-zero in Xorg(1) which can be triggered by a malicious client.
A source code patch is available.
[Applied to stable]
- Do not rely on interrupts being configured by the PROM on Sparc64 machines, makes Simics boot a bit further, and doesn't harm real machines.
-
- Expose the nx(4) temperature sensor into the sysctl(8) hw.sensors framework.
-
- Fix for link state announcements in vge(4).
+
- Expose the nx(4) temperature sensor into the sysctl(8) hw.sensors framework.
+
- Fix for link state announcements in vge(4).
-
- If resolving a name fail for ntpd(8), be more aggressive retrying, but with care.
-
- RELIABILITY FIX: Link state not correctly tracked in ospfd(8) and ripd(8).
+ - If resolving a name fail for ntpd(8), be more aggressive retrying, but with care.
+
- RELIABILITY FIX: Link state not correctly tracked in ospfd(8) and ripd(8).
A source code patch is available.
[Applied to stable]
- Enable FFS2 support in the GENERIC kernels.
-
- Add support in df(1) for reading ffs2 data directly from the device.
+
- Add support in df(1) for reading ffs2 data directly from the device.
- Lots of updates in the various pkg_* tools.
-
- Fix in the softraid(4) code for older compilers.
-
- Initial version of led_blink sysctl(8) for the landisk platform.
+
- Fix in the softraid(4) code for older compilers.
+
- Initial version of led_blink sysctl(8) for the landisk platform.
-
- Make amd64 boot(8) process skip reading boot.conf(5) if the Control key is pressed during boot.
-
- Add support in nx(4) for accessing the flash memory in the ROMUSB register area and read the board information on startup.
-
- Support for CPU throttling on MP systems in apmd(8).
+
- Make amd64 boot(8) process skip reading boot.conf(5) if the Control key is pressed during boot.
+
- Add support in nx(4) for accessing the flash memory in the ROMUSB register area and read the board information on startup.
+
- Support for CPU throttling on MP systems in apmd(8).
-
- RELIABILITY FIX: Bugs in spamd(8) could corrupt the database.
+ - RELIABILITY FIX: Bugs in spamd(8) could corrupt the database.
A source code patch is available.
[Applied to stable]
- STABILITY FIX: Incorrect spl level can lead to panics under heavy kqueue usage.
@@ -672,117 +672,117 @@
A source code patch is available.
[Applied to stable]
- Import cwm-3 to the xenocara source tree and remove wm2 from it.
-
- Fixes in pthreads(3) code for sizing the fd/fdp tables to help applications who increase nofiles using setrlimit().
+
- Fixes in pthreads(3) code for sizing the fd/fdp tables to help applications who increase nofiles using setrlimit().
- Check for Control Key being pressed on i386 boot, and if so, skip reading the boot.conf.
-
- Make ripd(8) inject a route for 224.0.0.9 on startup and remove it on exit, since it needs that route in order to work.
+
- Make ripd(8) inject a route for 224.0.0.9 on startup and remove it on exit, since it needs that route in order to work.
-
- Make disklabel(8) always use the BIOS geometry if there is one provided.
+
- Make disklabel(8) always use the BIOS geometry if there is one provided.
- RELIABILITY FIX: On PPC based systems, handle AltiVec assist exceptions better, fixes a panic under certain situations.
A source code patch is available.
[Applied to stable]
- Add a setperf mechanism for ICH speedstep on some Pentium 3/ICH systems.
-
- Enable tht(4) on amd64 and i386 GENERIC kernels.
+
- Enable tht(4) on amd64 and i386 GENERIC kernels.
- Add capacity to add one ntp server during install.
- Fix for alpha platform in the clock setting routines.
-
- Fix endless loop code in tht(4).
+
- Fix endless loop code in tht(4).
- Also apply PowerNow setperf fix to amd64.
-
- Make init(8) power down the machine on power(4) button press instead of just halting it.
+
- Make init(8) power down the machine on power(4) button press instead of just halting it.
- Prevent NFS send failures from logging, since they aren't helpful anyway.
-
- Make the power(4) on sparc64 map registers in I/O space if memory space fails.
+
- Make the power(4) on sparc64 map registers in I/O space if memory space fails.
- Fix for i386 SpeedStep/PowerNow state selection code, use number of states rather than the frequencies of the available states to distribute in the hw.setperf 0-100 range.
-
- Make mount(8) also mount FFS2 filesystems when given the -a flag.
-
- Add support in systat(1) for non-integral refresh intervals, possibly as low as 0.1s.
+
- Make mount(8) also mount FFS2 filesystems when given the -a flag.
+
- Add support in systat(1) for non-integral refresh intervals, possibly as low as 0.1s.
-
- Fixes for command line parsing in join(1).
-
- Make bgpd(8) and bgpctl(8) 4-byte AS compatible.
+
- Fixes for command line parsing in join(1).
+
- Make bgpd(8) and bgpctl(8) 4-byte AS compatible.
- Switch alpha to new timecounters.
- Add driver for macppc "System identifier" driver.
-
- Rename the macppc LED driver to xlights(4).
-
- Fix memory leaks in isakmpd(8).
+
- Rename the macppc LED driver to xlights(4).
+
- Fix memory leaks in isakmpd(8).
-
- Add ahci(4) to sparc64 GENERIC kernels.
-
- Fix for ahci(4) on sparc64, prevents free panics.
+
- Add ahci(4) to sparc64 GENERIC kernels.
+
- Fix for ahci(4) on sparc64, prevents free panics.
- Introduce an SMP aware hw.setperf mechanism.
- SECURITY FIX: IPv6 type 0 route headers can be used to mount a DoS attack against hosts and networks.
A source code patch is available.
[Applied to stable]
- Add driver for the macppc Xserve LEDs.
-
- Increase the firmware upload delay for malo(4), since 100ms is not enough for some X40s.
+
- Increase the firmware upload delay for malo(4), since 100ms is not enough for some X40s.
-
- Fix for the PHY selection code in gem(4), gets rid of duplicate PHY on SPARC64 Blade1000 machines.
-
- Teach dumpfs(8) about the "updated" flag.
+
- Fix for the PHY selection code in gem(4), gets rid of duplicate PHY on SPARC64 Blade1000 machines.
+
- Teach dumpfs(8) about the "updated" flag.
- Make the vfs_cache not be O(n^2) in certain cases.
-
- Update less(1) to version 382.
-
- Add sili(4) to alpha GENERIC kernels.
-
- Endian fix for the tht(4) firmware.
-
- Added microcode to tht(4), since Tehuti allows redistribution of it under a 4 clause BSD license.
+
- Update less(1) to version 382.
+
- Add sili(4) to alpha GENERIC kernels.
+
- Endian fix for the tht(4) firmware.
+
- Added microcode to tht(4), since Tehuti allows redistribution of it under a 4 clause BSD license.
- Plug memory leak in the xserver on client disconnect.
-
- Make sure fsck_ffs(8) does not look for FFS1 alternate superblocks when checking a FFS2 file system.
-
- In nm(1), fix a NULL dereference if the ELF symbol table size is zero.
-
- Make Alpha machines fill in the hw.serialno sysctl(8) if possible.
-
- Fix for newfs(8) when used with "-c".
-
- Fix a double free in gif(4) mtag check loop.
+
- Make sure fsck_ffs(8) does not look for FFS1 alternate superblocks when checking a FFS2 file system.
+
- In nm(1), fix a NULL dereference if the ELF symbol table size is zero.
+
- Make Alpha machines fill in the hw.serialno sysctl(8) if possible.
+
- Fix for newfs(8) when used with "-c".
+
- Fix a double free in gif(4) mtag check loop.
-
- Add support in ppp(8) for setting the address of the ppp peer.
-
- Fix for acpi(4) docking code.
-
- Add support in ftp(1) for proxies which require passwords.
-
- Fix in newfs(8) for FFS2 case.
+
- Add support in ppp(8) for setting the address of the ppp peer.
+
- Fix for acpi(4) docking code.
+
- Add support in ftp(1) for proxies which require passwords.
+
- Fix in newfs(8) for FFS2 case.
-
- Fix debug info in acpi(4) code when docking/undocking.
-
- Fix for wdc(4) drive detection, now detects certain microdrives plugged into Soekris boxes.
-
- Initial import of a nx(4) driver for NetXen Inc multiport 10Gb and Gigabit ethernet cards.
+
- Fix debug info in acpi(4) code when docking/undocking.
+
- Fix for wdc(4) drive detection, now detects certain microdrives plugged into Soekris boxes.
+
- Initial import of a nx(4) driver for NetXen Inc multiport 10Gb and Gigabit ethernet cards.
- Fix macppc OpenFirmware code to allow booting and having root on a USB device.
-
- Initial import of the tht(4) device, a driver for the Tehuti networks 10Gb ethernet cards.
+
- Initial import of the tht(4) device, a driver for the Tehuti networks 10Gb ethernet cards.
-
- Fix in isakmpd(8) for vpn peers that start rekeying on port 4500 when NAT-T is used.
-
- Fix for cas(4) on platforms where page size isn't 8k.
-
- Make systat(1) exit on "q" like top(1) does.
+
- Fix in isakmpd(8) for vpn peers that start rekeying on port 4500 when NAT-T is used.
+
- Fix for cas(4) on platforms where page size isn't 8k.
+
- Make systat(1) exit on "q" like top(1) does.
-
- For sd(4) devices that are unable to report geometry, change the fake geometry used to allow for even larger devices.
-
- Introduce mount_vnd(8) and fsck_vnd(8) commands to support fstab(5) usage of vnd(4) images.
+
- For sd(4) devices that are unable to report geometry, change the fake geometry used to allow for even larger devices.
+
- Introduce mount_vnd(8) and fsck_vnd(8) commands to support fstab(5) usage of vnd(4) images.
-
- Add support in newfs(8) for creating FFS2 file systems. Make install media create FFS1 by default.
+
- Add support in newfs(8) for creating FFS2 file systems. Make install media create FFS1 by default.
- New timecounter code for macppc.
-
- Fix panic in ath(4) when attaching to some IBM/Lenovo T42/T60s.
-
- Allow more than one -t to md5(1) in order to accommodate faster CPUs.
+
- Fix panic in ath(4) when attaching to some IBM/Lenovo T42/T60s.
+
- Allow more than one -t to md5(1) in order to accommodate faster CPUs.
- Improved signal delivery for smp i386 systems.
-
- Make date(1) use UTC instead of GMT0 when given "-u".
-
- For hoststated(8), add a new relay "path" action to filter the URL path and arguments.
+
- Make date(1) use UTC instead of GMT0 when given "-u".
+
- For hoststated(8), add a new relay "path" action to filter the URL path and arguments.
-
- Enabled sili(4) on sparc64 GENERIC and RAMDISK kernels.
+
- Enabled sili(4) on sparc64 GENERIC and RAMDISK kernels.
- Add support for a fourth axis on wsmouse devices. Currently limited to USB mice.
-
- New bbc(4) driver for the sparc64 BootBus Controller.
-
- New pmc(4) driver for the NatSemi PC87317 SuperIO chip.
-
- Add support in fsdb(8) for FFS2 also.
-
- Add support in fsck(8) to check FFS2 file systems.
+
- New bbc(4) driver for the sparc64 BootBus Controller.
+
- New pmc(4) driver for the NatSemi PC87317 SuperIO chip.
+
- Add support in fsdb(8) for FFS2 also.
+
- Add support in fsck(8) to check FFS2 file systems.
- Another fix for msdos file system code, this time when renaming into existing destination.
- Prevent infinite loop mapping interrupts on sparc64 Openfirware code when "reg" property is missing.
-
- Next step in making ospfd(8) equal cost multipath aware, by making SPF calculation multipath aware.
+
- Next step in making ospfd(8) equal cost multipath aware, by making SPF calculation multipath aware.
- Fix a vnode leak in the FFS code.
-
- Fix out-of-bounds memory access in dump(8).
-
- sili(4) enabled on amd64 and i386 GENERIC/RAMDISK kernels.
+
- Fix out-of-bounds memory access in dump(8).
+
- sili(4) enabled on amd64 and i386 GENERIC/RAMDISK kernels.
-
- Enable ral(4) on sparc64 GENERIC kernels.
-
- Add support for NCQ error recovery and NCQ command submission in the sili(4) driver.
-
- Make file(1) recognize mp3 files with an ID3v2 tag.
+
- Enable ral(4) on sparc64 GENERIC kernels.
+
- Add support for NCQ error recovery and NCQ command submission in the sili(4) driver.
+
- Make file(1) recognize mp3 files with an ID3v2 tag.
- Bring back i945GM support for xenocara.
- Fixes in the pthreads code for file descriptors getting blocked when using fork(), causing deadlocks in the parent process.
-
- In bgpctl(8), implement "show neighbor <peer> terse" to print all statistics in an easily parsable form.
-
- Add a pidfile argument to pflogd(8) so individual instances can be rotated via newsyslog.
-
- Make cp(1) try to create sparse files when copying blocks of zeroes.
+
- In bgpctl(8), implement "show neighbor <peer> terse" to print all statistics in an easily parsable form.
+
- Add a pidfile argument to pflogd(8) so individual instances can be rotated via newsyslog.
+
- Make cp(1) try to create sparse files when copying blocks of zeroes.
-
- bcw(4) driver under development removed.
-
- Lots of work on the sili(4) driver.
+
- bcw(4) driver under development removed.
+
- Lots of work on the sili(4) driver.
- Import the older i810 video driver into xenocara from the X.org version shipped with 3.9/4.0.
- Update Sendmail to 8.14.1.
@@ -790,122 +790,122 @@
A source code patch is available.
[Applied to stable]
-- For bge(4) on sparc64, prefer the local-mac-address provided by the PROM.
+
- For bge(4) on sparc64, prefer the local-mac-address provided by the PROM.
- Improved heuristic for detecting SMP on old-world macppc machines.
- Add Sun Fire V215/250 to the list of supported sparc64 machines.
- Implement a DK INFO ioctl so userland may query scsi disks for product, vendor etc.
- Fix for error handling when creating directories with long names in msdos filesystems.
-
- Do not make mkfs(8) reserve space for bad sector replacement, since modern disks to it themselves.
-
- Make tftpd(8) be more forgiving about tftp requests coming from 255.255.255.255.
+
- Do not make mkfs(8) reserve space for bad sector replacement, since modern disks to it themselves.
+
- Make tftpd(8) be more forgiving about tftp requests coming from 255.255.255.255.
- Initial import of a driver for the sparc64 Host/PCIe bridge found on the Sun Fire v215/245/445 machines.
-
- Have syslogd(8) retain the memory buffers on a SIGHUP if the syslog.conf(5) remains unchanged.
-
- Make ccd(4) accept an interleave of 0.
-
- Make an exception for the VT8521 SATA so ahci(4) wont attach to it, will revert to pciide(4) until it is fixed.
+
- Have syslogd(8) retain the memory buffers on a SIGHUP if the syslog.conf(5) remains unchanged.
+
- Make ccd(4) accept an interleave of 0.
+
- Make an exception for the VT8521 SATA so ahci(4) wont attach to it, will revert to pciide(4) until it is fixed.
-
- Enable acx(4) on macppc GENERIC kernels now that it works on big endian boxes.
-
- Rework the prefixlen parsing in bgpd.conf(5) so filtering IPv6 prefixes finally works.
-
- Fix bug in acx(4) HW DMA setup, makes TX work on big endian machines.
+
- Enable acx(4) on macppc GENERIC kernels now that it works on big endian boxes.
+
- Rework the prefixlen parsing in bgpd.conf(5) so filtering IPv6 prefixes finally works.
+
- Fix bug in acx(4) HW DMA setup, makes TX work on big endian machines.
-
- Add support in bgpctl(8) for "show rib community <community>".
+
- Add support in bgpctl(8) for "show rib community <community>".
-
- For carp(4), do not pick up IPv6 link local IPs on address deletions.
-
- Add base64 support to cksum(1) and friends.
-
- Add Sierra Wireless Aircard 580 to the list of supported umsm(4) devices.
-
- Fixes in tcpdump(8) for bus errors on sparc64 when dumping 802_11_RADIO packets.
-
- First step of making ospfd(8) equal cost multipath aware.
+
- For carp(4), do not pick up IPv6 link local IPs on address deletions.
+
- Add base64 support to cksum(1) and friends.
+
- Add Sierra Wireless Aircard 580 to the list of supported umsm(4) devices.
+
- Fixes in tcpdump(8) for bus errors on sparc64 when dumping 802_11_RADIO packets.
+
- First step of making ospfd(8) equal cost multipath aware.
-
- Make ahci(4) attach devices based on PCI class and interface fields, not just on a list of pci devices. This will cause disks to change from wd* to sd*.
-
- In ftpd(8), do not log when the slave gets killed because read() returns 0.
-
- Implement support for the NOOP smtp command in spamd(8), and change the behaviour or the maxblack parameter.
-
- Make sendbug(1) accept $VISUAL in addition to $EDITOR.
+
- Make ahci(4) attach devices based on PCI class and interface fields, not just on a list of pci devices. This will cause disks to change from wd* to sd*.
+
- In ftpd(8), do not log when the slave gets killed because read() returns 0.
+
- Implement support for the NOOP smtp command in spamd(8), and change the behaviour or the maxblack parameter.
+
- Make sendbug(1) accept $VISUAL in addition to $EDITOR.
-
- Added ahci(4) support to i386 RAMDISK kernels.
-
- Synchronised carp(4) advertisements on group demotion to reduce group failover to a few milliseconds.
-
- Add support in tcpdrop(8) for the 2-address format fstat outputs, also enhance IPv6 support by unpacking [addr]:port format.
-
- Make ospfd(8) re-originate the router LSA if the interface metric changes so the change can propagate instantly.
+
- Added ahci(4) support to i386 RAMDISK kernels.
+
- Synchronised carp(4) advertisements on group demotion to reduce group failover to a few milliseconds.
+
- Add support in tcpdrop(8) for the 2-address format fstat outputs, also enhance IPv6 support by unpacking [addr]:port format.
+
- Make ospfd(8) re-originate the router LSA if the interface metric changes so the change can propagate instantly.
-
- Yet another buffer fix for ftp(1).
+
- Yet another buffer fix for ftp(1).
- On amd64, allow compilation of kernels with MULTIPROCESSOR defined but with DDB undefined.
-
- In ntpd(8), improve sensor polling interval to 30 seconds, just like ntp polls.
-
- Add new flag to netstat(1) to restrict route display in conjunction with -r to routes in the same address family.
+
- In ntpd(8), improve sensor polling interval to 30 seconds, just like ntp polls.
+
- Add new flag to netstat(1) to restrict route display in conjunction with -r to routes in the same address family.
-
- Replaced the shellscript sendbug(1) with a rewritten version.
-
- Make httpd(8) not output the version numbers to silence confused auditing programs.
-
- Fix wrong length check in ftp(1), previous version could ignore the "/" character.
+
- Replaced the shellscript sendbug(1) with a rewritten version.
+
- Make httpd(8) not output the version numbers to silence confused auditing programs.
+
- Fix wrong length check in ftp(1), previous version could ignore the "/" character.
-
- Fix buffer overflow in ftp(1) when parsing the .netrc file.
-
- Initial import of sili(4), a SATA chipset from Silicon Image.
-
- Add HUAWEI Mobile Connect E620 to the list of supported ubsa(4) devices.
-
- In dvmrpd(8), add code to parse unicast routes learned from route report packets.
-
- Add support in mount_cd9660(8) for mounting arbitrary sessions.
-
- Enable NCQ on ahci(4) based SATA controllers.
+
- Fix buffer overflow in ftp(1) when parsing the .netrc file.
+
- Initial import of sili(4), a SATA chipset from Silicon Image.
+
- Add HUAWEI Mobile Connect E620 to the list of supported ubsa(4) devices.
+
- In dvmrpd(8), add code to parse unicast routes learned from route report packets.
+
- Add support in mount_cd9660(8) for mounting arbitrary sessions.
+
- Enable NCQ on ahci(4) based SATA controllers.
- Make libevent use arc4random() when generating the random IDs.
-
- ahci(4) enabled for i386 also.
+
- ahci(4) enabled for i386 also.
- Add support for RFC3137 in ospfd to allow Stub Router Advertisements.
-
- Make pfctl(8) enable basic ruleset optimization by default.
-
- Enable ahci(4) on amd64 kernels, only attaches to jmicron controllers so far.
-
- Lots of work on the ahci(4) driver to get native support for some sata controllers instead of going over pciide(4).
-
- Add support in hoststated(8) to specify a number of attempts to retry forwarded services.
-
- Add support for playing simple RIFF file (.wav) to aucat(1).
+
- Make pfctl(8) enable basic ruleset optimization by default.
+
- Enable ahci(4) on amd64 kernels, only attaches to jmicron controllers so far.
+
- Lots of work on the ahci(4) driver to get native support for some sata controllers instead of going over pciide(4).
+
- Add support in hoststated(8) to specify a number of attempts to retry forwarded services.
+
- Add support for playing simple RIFF file (.wav) to aucat(1).
- Add delay to com_console so the fifo has time to flush itself before resetting, to avoid garbled dmesg output seen on some arm machines.
-
- Add line-buffering flag (-u) to sed(1).
+
- Add line-buffering flag (-u) to sed(1).
-
- Remove force-PIO workaround for landisk using the pciide(4) driver.
+
- Remove force-PIO workaround for landisk using the pciide(4) driver.
- Make the SH-based landisk platform default to writeback cache in the CPU.
- Deactivate the pmap in cpu_exit, avoids quite a lot of TLB shootdowns in the reaper.
- Update libevent to 1.3b, keeping local changes.
-
- Luna88k LCD device is now controllable with the lcd(4).
+
- Luna88k LCD device is now controllable with the lcd(4).
- Add FFS2 fields to the superblock, change fs tools to keep accessing the FFS1 fields.
- Make sure the privilege separated daemons do not signal "connection closed" upstream when receiving EINTR or EAGAIN.
- Move i386 to new timecounter code.
-
- Improvement in the way nmea(4) takes the timestamp from the timedelta sensor when no PPS signal is available.
+
- Improvement in the way nmea(4) takes the timestamp from the timedelta sensor when no PPS signal is available.
-
- Initial import of a softraid(4) device, providing a framework for I/O manipulation. Disabled for now.
-
- Add IP (v4 and v6) load balancing to carp(4), similar to the ARP balancing.
-
- Add Sierra Wireless Aircard 875 to the list of known-to-work umsm(4) devices.
-
- Enable pxammc(4) and sdmmc(4) on Zaurus RAMDISK kernels too.
+
- Initial import of a softraid(4) device, providing a framework for I/O manipulation. Disabled for now.
+
- Add IP (v4 and v6) load balancing to carp(4), similar to the ARP balancing.
+
- Add Sierra Wireless Aircard 875 to the list of known-to-work umsm(4) devices.
+
- Enable pxammc(4) and sdmmc(4) on Zaurus RAMDISK kernels too.
- Initial support for PXA27x SD/SDIO/MMC controller on the Zaurus platform.
-
- Fix in locate(1) for filenames containing spaces.
-
- Add OX16PC945K to the list of supported puc(4) devices.
+
- Fix in locate(1) for filenames containing spaces.
+
- Add OX16PC945K to the list of supported puc(4) devices.
- Fixes in the signal handling code when waking up. This fixes the majority of the rthreads lockings and hangups.
- Start USB1 initialization later, so all USB2 controllers have completed before starting USB1 legacy emulation.
- Better delay handling for USB startup code, speeds up booting if you have lots of host controllers.
-
- Fixes for hoststated(8) communication sockets, now shows relay statistics of all preforked processes.
+
- Fixes for hoststated(8) communication sockets, now shows relay statistics of all preforked processes.
-
- Enabled wpi(4) on amd64 GENERIC kernels.
-
- Make the upgrade script default to not fsck(8) non-root filesystems.
-
- Added uts(4), a driver for USB touchscreens.
+
- Enabled wpi(4) on amd64 GENERIC kernels.
+
- Make the upgrade script default to not fsck(8) non-root filesystems.
+
- Added uts(4), a driver for USB touchscreens.
- Add support in the alpha platform for a couple of new Alpha models, AlphaServer 1200 and 4100.
-
- In tcpdump(8), make sure we recognise more vendor payloads in the IKE decoder.
-
- Update bgpd(8) multiprotocol extension code to RFC 4760.
-
- Make sure the distributed prefix has a metric != 0 in ospfd(8).
+
- In tcpdump(8), make sure we recognise more vendor payloads in the IKE decoder.
+
- Update bgpd(8) multiprotocol extension code to RFC 4760.
+
- Make sure the distributed prefix has a metric != 0 in ospfd(8).
- New timecounter code for the sparc64 platform.
-
- Add PCI id for Intel's PCIe quad port fiber adapter to the em(4) driver.
+
- Add PCI id for Intel's PCIe quad port fiber adapter to the em(4) driver.
- Fix for UltraSPARC-IV CPU detection in OpenFirmware to prevent crashes.
- Make sure the OpenFirmware node can be found on UltraSPARC-IV CPUs.
-
- Fix in rcs(1) where multiple input files for ci would have flags from previous files affect the later ones.
+
- Fix in rcs(1) where multiple input files for ci would have flags from previous files affect the later ones.
- Fix for pthread include file.
-
- Allow nmeaattach(8) to start a sensor in the rc(8) scripts before starting ntpd(8) to give it time to cold start.
-
- Do not delete greylisted entries in the spamd(8) database when whitelisting, they expire anyway and there could be a race when using -M and a retry comes in.
+
- Allow nmeaattach(8) to start a sensor in the rc(8) scripts before starting ntpd(8) to give it time to cold start.
+
- Do not delete greylisted entries in the spamd(8) database when whitelisting, they expire anyway and there could be a race when using -M and a retry comes in.
- Fixes for ext2fs code.
-
- Fix for acx(4) devices running in HostAP mode, solves problem of getting DHCP leases from the AP when the network is quiet.
-
- Fix in sort(1) for very large input files.
-
- Allow IP_TTL and IP_MINTTL to be specified in the hoststated.conf(5) to support GTSM according to RFC 3682.
-
- Add quirk for Sony DSC-T10 umass(4) devices.
+
- Fix for acx(4) devices running in HostAP mode, solves problem of getting DHCP leases from the AP when the network is quiet.
+
- Fix in sort(1) for very large input files.
+
- Allow IP_TTL and IP_MINTTL to be specified in the hoststated.conf(5) to support GTSM according to RFC 3682.
+
- Add quirk for Sony DSC-T10 umass(4) devices.
- Fix for hanging or extremely slow "bgpctl show rib" commands in some cases.
-
- Fixes for "hal" on ath(4) 5210, 5211 and 5212 based devices on big endian systems.
+
- Fixes for "hal" on ath(4) 5210, 5211 and 5212 based devices on big endian systems.