===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/plus59.html,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -r1.5 -r1.6
--- www/plus59.html 2016/03/02 16:39:59 1.5
+++ www/plus59.html 2016/03/03 18:48:26 1.6
@@ -76,6 +76,156 @@
+
+- In fdisk(8), make -i zap any undesirable GPT hanging around, just like the reinit command does.
+
- In rtadvd(8), fix dynamic prefix tracking.
+
- In smtpd(8):
+
+- Support user+tag epxansion in aliases.
+
- While delivering to lmtp or mda, accept the optional "as user" parameter in smtpd.conf(5).
+
- Fix IPv6 address parsing in smtpd.conf(5).
+
- Allow the use of the tls+backup:// schema in smtpd.conf(5).
+
- Remove table-passwd, table-sqlite and table-ldap.
+
+ - In ubcmtp(4), add support for the touchpad found on the MacBooPro12,1.
+
- Use pledge(2) in adventure(6), backgammon(6), boggle(6), bs(6), canfield(6), fish(6), gomoku(6), grdc(6), mille(6), prime(6), ssh-keysign(8), trek(6) and wump(6).
+
+
- Make it possible to detach bge(4).
+
- Add OpenBSD::Pledge, a Perl interface to pledge(2).
+
- In xhci(4):
+
+- Make the integrated SD card reader in the MacBookPro12,1 attach.
+
- Make hotplugging USB 3.0 devices work on the MacBookPro12,1.
+
+ - Convert the simple list of multipath route entries used by ART kernels to a SRP list. This makes the rtable_* layer MP-safe.
+
- Remove stdethers(8) and stdhosts(8).
+
- In atc(6), battlestar(6) and robots(6), use pledge(2) and move the score file to the user's home directory.
+
- Use pledge(2) in cribbage(6).
+
- In make(1), fix duplicate targets in target list.
+
+
- In skeyinit(1):
+
+- Use pledge(2).
+
- Allow the -n flag to work in -s mode.
+
+ - In installboot(8), back out pledge(2).
+
- Mark the interrupt handler for pci (but not sbus) attached gem(4) as MP-safe.
+
+
- In ssh-keygen(1), do not leak a temporary file if there is no known_hosts file.
+
- In sshd(8), don't include port number in tcpip-forward replies for requests that don't allocate a port (bz#2509).
+
- In doas(1), don't write past the end of a buffer after reading too long a line from the configuration file.
+
- On sparc64, don't panic in pmap_enter() if we deplete the pool of pv entries and the PMAP_CANFAIL flag is set.
+
- In pci(4), do not report a bus conflict for bridges that are left (partly) unconfigured by the system firmware.
+
- In df(1), avoid reading past the end of a buffer.
+
- In ugen(4), attach the iPhone 6.
+
- In snake(6), use pledge(2) and move the score file into the user's home directory.
+
- Change the command-line syntax of vmmctl(8).
+
+
- In efiboot, avoid setting mode to GOP if the mode is unchanged. Also don't panic if the setting mode is failed.
+
- Remove rpc.yppasswdd(8).
+
- Use pledge(2) in installboot(8), login_radius(8) and scp(1).
+
- In chpass(1), login_chpass(8) and passwd(1), delete YP password related code.
+
- In rpc.bootparamd(8), delete YP lookup code.
+
- In syslog.conf(5), disable the *.emerg block by default.
+
- Automatically start vmm(4) when the first VM is created and after the last VM is terminated. This removes the explicit enable and disable cmmands from vmmctl(8) and vmm.conf(5).
+
- In fdisk(8), when prompting for a GPT partition type, use the partition's current type as default; and when prompting for an LBA, show the minimum and maximum values in the prompt.
+
+
- In ifconfig(8), fix breakage when re-configuring an IPv6 static address.
+
- Stop building Mesa on alpha on mips64 because of gcc and binutils issues.
+
+
- Replace IFF_OACTIVE manipulation with MP-safe operations.
+
- Add sendsyslog2(2). This makes it possible to remove the direct /dev/console opening code from libc.
+
- On libc, use reentrant versions of getpwnam(3), getpwuid(3), getgrnam(3), and getgrgid(3) within libc to avoid reusing the static buffers returned by the non-reentrant versions.
+
- In tmux(1):
+
+- Show libevent version in showmsgs -I.
+
- All kill-session -C to clear alerts in all windows.
+
- Remove the -I part of show-messages.The server start time can be accessed with a new start_time format.
+
+ - In pciide(4), allow to reliably found disks on Xserve G5 by increasing the delay between the PHY reset and the status check for ServerWorks SATA.
+
- In vi(1), turn on filename tab completion by default.
+
+
- In telnet(1), don't support repeated connections. This avoids problems with pledge(2).
+
- In atc(6), battlestar(6), hack(6), phantasia(6), robots(6), sail(6), and snake(6), remove the setgid bit.
+
- In canfield(6), remove the setgid bit and move score files into the user's home directory.
+
- Use pledge(2) in fdisk(8) and mount(8).
+
- Remove support for "lookup yp" in resolv.conf(5). It is incompatible with pledge(2).
+
- In vmd(8), add the -d and -v flags.
+
- In resolv.conf(5), remove support for "lookup yp".
+
- In vmd(8), add support for logging to stderr or syslog, and to run it in foreground with -d option.
+
- In sndiod(8):
+
+- Ensure the /tmp/aucat directory gets the right permissions.
+
- Exit cleanly in the case where the clock is ticking because of a MMC start message.
+
- Remove the unused -M option.
+
+ - Attach zs(4/macppc) as "zs" rather than "zsc".
+
- In bc(1), fix printing of non-ASCII characters in an error message and fix a number of problems caused by invalid input.
+
+
- In vmmctl(8), add support for vmm.conf(5).
+
- Add vmd(8) and vmmctl(8).
+
- In tmux(1), if display-time is set to 0, show status messages until a key is pressed.
+
- In ospfctl(8), print what ospfd(8) thinks is connected by adding a "C" to the nexthop output.
+
- In ospfd(8), improve ABR support especially for self-originated stub networks. This solves the last issues when using ospfd(8) in multiple areas.
+
+
- Import mesa 11.0.6.
+
- Use pledge(2) in nsd(8).
+
- In pcidump(8), print the PCI power state when -v is given.
+
- In fdisk(8), bring GPT partition editing into line with MBR partition editing.
+
- Fix inteldrm(4) on recent Apple hardware.
+
- Make sdhc(4) work with 64-bit memory BARs such as those found on the new PC Engines apu.
+
- In tail(1), improve fixes for running without -f.
+
- In vmm(4), do not create a VM if vmm mode hasn't been enabled.
+
+
- In fdisk(8), fix several nits in editing partitions.
+
- In mandoc(1), fix multiple issues regarding process group and signal mask handling.
+
- Remove login_tis(8).
+
- In the installer, do not auto-skip X sets on systems without wscons(4).
+
- In em(4), revert all the changes to run the tx completion path without holding the kernel lock. It causes "watchdog timeout" problems.
+
- In cvs(1), disable server-side pserver support.
+
- In sppp(4), remove support for SPPP with framing. It is no longer used.
+
- In ed(1), restore the user-defined prompt (specified with -p) when it was turned off and then on again with "P".
+
- Use pledge(2) in monop(6), skeyinit(1), tetris(6), trpt(8), worm(6) and worms(6).
+
+
- Repair most cases of "tail +n" usage.
+
- In tmux(1), only assume pasting with at least two characters.
+
- Update to flex(1) 2.5.39 and add various improvements including use of pledge(2).
+
- In fdisk(8), when an existing partition is modified in LBA mode, ensure that the partition table is marked dirty so that it gets written when "quit" is issued.
+
- In tail(1), allow tailing multiple files.
+
- Use pledge(2) in OpenCVS.
+
- In the kernel, don't try and wakeup other threads to handle pending work when it is known there's only one thread in the taskq.
+
- In newsyslog(8), back out pledge(2).
+
- In ssh(1), disallow ConnectionAttempts=0.
+
- In vi(1), remove cscope support.
+
+
- In the installer, set "prohibit-password" in sshd_config(5) instead of "without-password".
+
- Use pledge(2) in fvwm(1), FvwmPager(1), hotplugd(8), locale(1), sensorsd(8).
+
- Add icdb, the Internal C Database: a simpler replacement for the old Berkeley DB code.
+
- Add getpwnam_shadow(3) and getpwuid_shadow(3). These functions will always open the secure/shadow/master password files.
+
- In cnmac(4/octeon), fix the reception of short non-IP packets by accounting of padding with dynamic short packets.
+
- In tmux(1), add the "s/foo/bar/:" prefix for formats to substitute bar for foo.
+
- Fix a regression introduced by the rtalloc(9) rewrite where only the first route of a multipath chain had a valid next hop and could be used.
+
- In ssh-keygen(1), fix -l for private keys. This was broken in support for multiple plain keys on stdin.
+
- In sndiod(8), disable -L (networking) until privilege separation is implemented.
+
+
- In fdisk(8), since -e edits the on-disk information, remove GPT and re-read it from disk if appropriate.
+
- In crontab(1), check for setgid(2) failure before executing editor and warn if the exec of shell + editor fails.
+
- In ntpd(8), fix memory leak in remove a constraint code path.
+
- In trpt(8), remove the setgid bit.
+
- In tetris(6), remove the setgid bit and move score files into the user's home directory.
+
- Remove lptest(1), pac(8) and yptest(8),
+
- In bge(4), clear the interface timer when shutting down the interface so the watchdog timer doesn't fire a few seconds later.
+
- In snmpd(8), exclude sensors marked as invalid from the sensors MIB.
+
- Use pledge(2) in cvs(1), getconf(1), newsyslog(8), sa(8) and showmount(8).
+
- Unbreak next-hop caching on multipath setups: when multiple gateways are in use, the next-hop entry might not be on the same interface.
+
- In bgpd(8), in the session engine, handle loss of the pipe with a normal shutdown of sessions and exit.
+
+
- In ssh-keygen(1), allow fingerprinting from standard input and support fingerprinting multiple plain keys in a file and authorized_keys files (bz#1319).
+
- Use pledge(2) in calendar(1), gprof(1), mail(1), and shutdown(8).
+
- In at(1), make -l comply with POSIX.
+
- Fix a panic that happens when radeomdrm(4) detaches because the hardware couldn't be initialized properly.
+
- In pvbus(4), fix a panic on i386 under VMware.
+
- Add the QuoVadis root certificates to /etc/ssl/cert.pem.
- In sshd(8), add a new authorized_keys option "restrict" that includes all current and future key restrictions. Also add permissive versions of the existing restrictions.
- In ssh_config(5), add the AddKeysToAgent option.
@@ -233,7 +383,7 @@
- Add Chacha20-Poly1305 to the OpenBSD Cryptographic Framework and enable it in the software crypto driver and the IPsec/ESP and PF_KEY frameworks.
- In whois(1), add -I to use whois.iana.org (root zone database).
- In tcpdump(8), print RDNSS nameserver addresses and option names for some other known options that are not otherwise decoded yet (DNSSL, route information).
-
- In libssl, add EVP_aead_chacha20_poly1305_ietf(3), a ChaCha20 with a Poly1305 authenticator for IETF protocols.
+
- In libssl, add EVP_aead_chacha20_poly1305_ietf(3), a ChaCha20 with a Poly1305 authenticator for IETF protocols.
- Remove ARP load-balacing in order to simplify making ARP MP-safe.
- In xhci(4), mark the interrupt handler as IPL_MPSAFE since it only schedules a soft-interrupt.
- In ikectl(8):