===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/want.html,v
retrieving revision 1.736
retrieving revision 1.737
diff -u -r1.736 -r1.737
--- www/want.html 2009/11/05 03:51:07 1.736
+++ www/want.html 2009/11/06 18:13:35 1.737
@@ -72,6 +72,7 @@
We generally do not need older and "very common" ISA/PCI equipment, since
our developers will generally have gotten their hands on these in the
past.
+A variety of laptops for our ACPI developers working on suspend.
@@ -100,15 +101,130 @@
Contact dlg@openbsd.org, reyk@openbsd.org, and claudio@openbsd.org.
-Specific devices needed by specific developers
+Specific platform requests by specific developers
-- Any MPLS capable equipment for interoperability testing. E.g. Cisco 1841.
- Contact michele@openbsd.org and claudio@openbsd.org.
-
- Bluetooth devices, especially phones, keyboards, mice, and headsets.
- Contact uwe@openbsd.org and xsa@openbsd.org.
+
+
+
- alpha:
+
+- An I/O board for Force Flexor A264 board, as well as a PCIMG backplane
+ with 64-bit PCI slots are needed in France.
+ Contact miod@openbsd.org.
+
- A few memory modules and disk drives for an AlphaServer DS10 needed in
+ Asturias, Spain.
+ Contact sobrado@openbsd.org.
+
+
+
+
+ - aviion:
+
+- m88k-based DG AViiON hardware needed in France.
+ Contact miod@openbsd.org.
+
+
+
+
+ - hppa:
+
+- A HP C-class workstation (preferably a C240 or C360) wanted in Sydney,
+ Australia to help with Portable OpenSSH development. Contact
+ dtucker@openbsd.org.
+
+
+ - hppa64:
+
+- HP J6700/J6750 2U machines. Note these are fairly cheap on Ebay
+ at the moment.
+ Contact deraadt@openbsd.org.
+
+
+ - i386:
+
+- Thinkpad with an
+ aps(4) accelerometer for
+ mg(1) development in Calgary, AB, Canada. Contact kjell@openbsd.org.
+
- A 1.4GHz or 1.6GHz IBM Thinkpad x40 laptop for Calgary.
+ Contact deraadt@openbsd.org.
+
- A IBM/Lenovo X-series laptop (X60 or newer) in Edmonton Alberta, Canada,
+ Contact gwk@openbsd.org.
+
- IBM ThinkPad Dock II (model 2877) with PCI/CardBus/ultrabay slots for a T42
+ to work on better hotplug device support, needed in Hannover, Germany.
+ Contact jsg@openbsd.org.
+
- X60 power supply (schuko plug, preferably) and X60 dock (X6 UltraBase)
+ battery in Aalborg, Denmark.
+ Contact mk@openbsd.org.
+
- A Commmell LE-565
+ motherboard is needed in Australia.
+ Contact djm@openbsd.org.
+
- Four Dell R610 (or similar) 2.5" SAS drive sleds.
+ Contact deraadt@openbsd.org.
+
+
+
+
+
+
+ - macppc:
+
+- PowerPC mac mini needed in Heemstede, the Netherlands.
+ Contact otto@openbsd.org.
+
+
+
+
+
+ - sgi:
+
+- An SGI Origin (or Onyx) 300 and
+ a Tezro (preferrably the rackmount version) needed in France.
+ Contact miod@openbsd.org.
+
+
+ - socppc:
+
+- A Thecus N1200
+ is needed in Australia.
+ Contact djm@openbsd.org.
+
- RouterBOARD RB/600A or RB/1000U.
+ Contact jasper@openbsd.org.
+
+
+
+
+
+ - sparc64:
+
- UltraSPARC machine with PCI Express for driver development/sparc64
testing in Hannover, Germany.
Contact jsg@openbsd.org.
+
- An SBus-based UltraSPARC workstation, preferably a Sun
+ Ultra 2, needed in Assen, The Netherlands.
+ Contact kettenis@openbsd.org.
+
+
+
+
+
+ - Miscellaneous:
+
+- Itanium 1U or 2U machines wanted in various places.
+ Contact deraadt@openbsd.org.
+
- Openmoko Freerunner smartphone needed in London, UK for porting work.
+ Contact oga@openbsd.org.
+
- Low profile machine with azalia(4) in France.
+ Contact ratchov@openbsd.org.
+
+
+
+
+
+Specific cards needed by specific developers
+
- Unsupported CardBus cards such as
- Adaptec SlimSCSI APA-1480 CardBus (aic7860/ahc)
@@ -119,15 +235,48 @@
to improve support for detachable drivers. Needed in Hannover, Germany.
Contact jsg@openbsd.org.
- - IBM ThinkPad Dock II (model 2877) with PCI/CardBus/ultrabay slots for a T42
- to work on better hotplug device support, needed in Hannover, Germany.
- Contact jsg@openbsd.org.
- An Intel IOP348 based SAS controller (such as the Supermicro AOC-USAS-S4i)
to help in sli(4)
development. Needed in Brisbane, Australia.
Contact dlg@openbsd.org.
-
- m88k-based DG AViiON hardware needed in France.
- Contact miod@openbsd.org.
+
- A MiniPCI GPS Receiver
+ for timedelta sensor related development in Sunnyvale, USA.
+ The appropriate antenna and MiniPCI-to-PCI adapters would also be useful.
+ Contact ckuethe@openbsd.org.
+
- Newer Novatel Wireless HSDPA/UMTS cards (Merlin U730, U740 and U870)
+ as well as any unsupported 3G/UMTS/HSDPA device needed for driver
+ development in Oldenburg, Germany.
+ Contact fkr@openbsd.org.
+
- One or Two Marvell Yukon II based ethernet cards needed in France.
+ Contact pyr@openbsd.org.
+
- QLogic ISP10160 SCSI adapter needed in Assen, the Netherlands.
+ Contact kettenis@openbsd.org.
+
- A stand-alone PCI network interface card using VIA VT6105M RhineIII
+ for portability testing of driver changes needed in Devon, UK.
+ RouterBoard RB44 is one such card.
+ Contact sthen@openbsd.org.
+
- Atheros 802.11n devices (AR9160, AR9285, AR9287) needed in France.
+ Contact damien@openbsd.org.
+
- Some kind of Magma 1 (or 3) slot Expresscard->PCIe expansion system, for
+ improving our PCI drivers.
+ Contact deraadt@openbsd.org.
+
- PCI-e QLogic Fiber Channel adapter needed in Calgary, Alberta, Canada.
+ Contact deraadt@openbsd.org.
+
- Sun XVR-300 framebuffer needed in Assen, the Netherlands. Contact
+ kettenis@openbsd.org.
+
- A PCI-E Mini Card to PCI-E 1x adapter
+ (like the MP2W from HWtools)
+ needed in France.
+ Contact damien@openbsd.org.
+
+
+
+Specific devices and equipment needed by specific developers
+
+- Any MPLS capable equipment for interoperability testing. E.g. Cisco 1841.
+ Contact michele@openbsd.org and claudio@openbsd.org.
+
- Bluetooth devices, especially phones, keyboards, mice, and headsets.
+ Contact uwe@openbsd.org and xsa@openbsd.org.
- Several developers need SDIO (any function) and SD/MMC memory cards.
Contact uwe@openbsd.org.
- A CF- and SDIO-attached GPS receiver and device that provide exact time
@@ -146,104 +295,29 @@
Contact ckuethe@openbsd.org.
- CDMA clock (Praecis Ct or similar) in Sunnyvale, USA.
Contact ckuethe@openbsd.org.
-
- Newer Novatel Wireless HSDPA/UMTS cards (Merlin U730, U740 and U870)
- as well as any unsupported 3G/UMTS/HSDPA device needed for driver
- development in Oldenburg, Germany.
- Contact fkr@openbsd.org.
- Any device (monitor or projector) able to output a 1728x2304 image,
sync on green, with either a 13W3 or an HD15 connector needed in France.
Contact miod@openbsd.org, short-term loan acceptable.
- A Wacom USB or Serial touchpad needed in Hungary for driver developement.
Contact robert@openbsd.org.
-
- X60 power supply (schuko plug, preferably) and X60 dock (X6 UltraBase)
- battery in Aalborg, Denmark.
- Contact mk@openbsd.org.
-
- Itanium 1U or 2U machines wanted in various places.
- Contact deraadt@openbsd.org.
-
- HP J6700/J6750 2U hppa64 machines. Note these are fairly cheap on Ebay
- at the moment.
- Contact deraadt@openbsd.org.
-
- A 1.4GHz or 1.6GHz IBM Thinkpad x40 laptop for Calgary.
- Contact deraadt@openbsd.org.
-
- One or Two Marvell Yukon II based ethernet cards needed in France.
- Contact pyr@openbsd.org.
-
- PowerPC mac mini needed in Heemstede, the Netherlands.
- Contact otto@openbsd.org.
- TI TUSB3140 serial USB adapter in Calgary.
Contact deraadt@openbsd.org.
- A SATA drive around 250Gb for a ProLiant DL145 G2 needed in Hannover, Germany.
Contact reyk@openbsd.org.
-
- Low profile machine with azalia(4) in France.
- Contact ratchov@openbsd.org.
-
- Thinkpad with an
- aps(4) accelerometer for
- mg(1) development in Calgary, AB, Canada. Contact kjell@openbsd.org.
-
- A HP C-class workstation (preferably a C240 or C360) wanted in Sydney,
- Australia to help with Portable OpenSSH development. Contact
- dtucker@openbsd.org.
- Cisco NM-16A or NM-32A Modules to build more console servers are
welcome in Zurich, Switzerland. Contact claudio@openbsd.org
- Slide rail kit for Sun v20z needed in Gorinchem, The Netherlands.
Contact jasper@openbsd.org.
-
- An I/O board for Force Flexor A264 board, as well as a PCIMG backplane
- with 64-bit PCI slots are needed in France.
- Contact miod@openbsd.org.
-
- A Thecus N1200
- is needed in Australia.
- Contact djm@openbsd.org.
-
- A Commmell LE-565
- motherboard is needed in Australia.
- Contact djm@openbsd.org.
- Narrow SCSI (50pin) disk drive 4GB or more, 3.5" size
is needed near New York City, USA.
Contact kurt@openbsd.org.
-
- QLogic ISP10160 SCSI adapter needed in Assen, the Netherlands.
- Contact kettenis@openbsd.org.
-
- An SBus-based UltraSPARC (sparc64) workstation, preferably a Sun
- Ultra 2, needed in Assen, The Netherlands.
- Contact kettenis@openbsd.org.
- Sun StorEdge MultiPack-FC desktop array needed in Assen, The Netherlands.
Contact kettenis@openbsd.org.
- Sun StorEdge MultiPack-FC desktop array needed in Toronto, Canada.
Contact krw@openbsd.org.
-
- Openmoko Freerunner smartphone needed in London, UK for porting work.
- Contact oga@openbsd.org.
-
- A stand-alone PCI network interface card using VIA VT6105M RhineIII
- for portability testing of driver changes needed in Devon, UK.
- RouterBoard RB44 is one such card.
- Contact sthen@openbsd.org.
-
- A few memory modules and disk drives for an AlphaServer DS10 needed in
- Asturias, Spain.
- Contact sobrado@openbsd.org.
-
- An SGI Origin (or Onyx) 300 and
- a Tezro (preferrably the rackmount version) needed in France.
- Contact miod@openbsd.org.
-
- Atheros 802.11n devices (AR9160, AR9285, AR9287) needed in France.
- Contact damien@openbsd.org.
-
- A variety of laptops for our ACPI developers working on suspend.
- Contact deraadt@openbsd.org.
-
- Some kind of Magma 1 (or 3) slot Expresscard->PCIe expansion system, for
- improving our PCI drivers.
- Contact deraadt@openbsd.org.
-
- A IBM/Lenovo X-series laptop (X60 or newer) in Edmonton Alberta, Canada,
- Contact gwk@openbsd.org.
-
- PCI-e QLogic Fiber Channel adapter needed in Calgary, Alberta, Canada.
- Contact deraadt@openbsd.org.
- A variety pack of shortish (SPF connectors on at least one end) fibers
wanted in Calgary.
Contact deraadt@openbsd.org.
-
- Sun XVR-300 framebuffer needed in Assen, the Netherlands. Contact
- kettenis@openbsd.org.
-
- Four Dell R610 (or similar) 2.5" SAS drive sleds.
- Contact deraadt@openbsd.org.
-
- A PCI-E Mini Card to PCI-E 1x adapter
- (like the MP2W from HWtools)
- needed in France.
- Contact damien@openbsd.org.
-
- RouterBOARD RB/600A or RB/1000U.
- Contact jasper@openbsd.org.
@@ -262,7 +336,7 @@
www@openbsd.org
-$OpenBSD: want.html,v 1.736 2009/11/05 03:51:07 marco Exp $
+$OpenBSD: want.html,v 1.737 2009/11/06 18:13:35 jasper Exp $