######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE # # $OpenBSD: termtypes.master,v 1.48 2013/01/16 07:55:16 dcoppa Exp $ # # This version of terminfo.src is distributed with ncurses and is maintained # by Thomas E. Dickey (TD). # # Report bugs and new terminal descriptions to # bug-ncurses@gnu.org # # $Revision: 1.48 $ # $Date: 2013/01/16 07:55:16 $ # # The original header is preserved below for reference. It is noted that there # is a "newer" version which differs in some cosmetic details (but actually # stopped updates several years ago); we have decided to not change the header # unless there is also a change in content. # # To further muddy the waters, it is noted that changes to this file as part of # maintenance of ncurses (since 1996) are generally conceded to be copyright # under the ncurses MIT-style license. That was the effect of the agreement # which the principal authors of ncurses made in 1998. However, since much of # the file itself is of unknown authorship (and the disclaimer below makes it # obvious that Raymond cannot or will not convey rights over those parts), # there is no explicit copyright notice on the file itself. # # It would also be a nuisance to split the file into unknown/known authorship # and move pieces as they are maintained, since many of the maintenance changes # have been small corrections to Raymond's translations to/from termcap format, # correcting the data but not the accompanying annotations. # # In any case, note that almost half of this file is not data but annotations # which reflect creative effort. Furthermore, the structure of entries to # reuse common chunks also is creative (and subject to copyright). Finally, # some portions of the data are derivative work under a compatible MIT-style # license from xterm. # #------------------------------------------------------------------------------ # Version 10.2.1 # terminfo syntax # # Eric S. Raymond (current maintainer) # John Kunze, Berkeley # Craig Leres, Berkeley # # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu # address is no longer valid. The latest version can always be found at # . # # PURPOSE OF THIS FILE: # # This file describes the capabilities of various character-cell terminals, # as needed by software such as screen-oriented editors. # # Other terminfo and termcap files exist, supported by various OS vendors # or as relics of various older versions of UNIX. This one is the longest # and most comprehensive one in existence. It subsumes not only the entirety # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL # termcap file, but also large numbers of vendor-maintained termcap and # terminfo entries more complete and carefully tested than those in historical # termcap/terminfo versions. # # Pointers to related resources (including the ncurses distribution) may # be found at . # # INTERNATIONALIZATION: # # This file uses only the US-ASCII character set (no ISO8859 characters). # # This file assumes a US-ASCII character set. If you need to fix this, start # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers # for your character set. \E(A and \E)A enables the British character set # with the pound sign at position 2/3. # # In a Japanese-processing environment using EUC/Japanese or Shift-JIS, # C1 characters are considered the first-byte set of the Japanese encodings, # so \E)0 should be avoided in and initialization strings. # # FILE FORMAT: # # The version you are looking at may be in any of three formats: master # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell # which by the format given in the header above. # # The master format is accepted and generated by the terminfo tools in the # ncurses suite; it differs from stock (System V-compatible) terminfo only # in that it admits a group of capabilities (prefixed `OT') equivalent to # various obsolete termcap capabilities. You can, thus, convert from master # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if # you have ncurses `tic -I' is nicer (among other things, it automatically # outputs entries in a canonical form). # # The termcap version is generated automatically from the master version # using tic -C. This filtering leaves in the OT capabilities under their # original termcap names. All translated entries fit within the 1023-byte # string-table limit of archaic termcap libraries except where explicitly # noted below. Note that the termcap translation assumes that your termcap # library can handle multiple tc capabilities in an entry. 4.4BSD has this # capability. Older versions of GNU termcap, through 1.3, do not. # # For details on these formats, see terminfo(5) in the ncurses distribution, # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD # curses has been declared obsolete by the caretakers of the 4.4BSD sources # as of June 1995; they are encouraging everyone to migrate to ncurses. # # Note: unlike some other distributed terminfo files (Novell Unix & SCO's), # no entry in this file has embedded comments. This is so source translation # to termcap only has to carry over leading comments. Also, no name field # contains embedded whitespace (such whitespace confuses rdist). # # Further note: older versions of this file were often installed with an editor # script (reorder) that moved the most common terminal types to the front of # the file. This should no longer be necessary, as the file is now ordered # roughly by type frequency with ANSI/VT100 and other common types up front. # # Some information has been merged in from terminfo files distributed by # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information # comes from vendors who maintain official terminfos for their hardware # (notably DEC and Wyse). # # A detailed change history is included at the end of this file. # # FILE ORGANIZATION: # # Comments in this file begin with # - they cannot appear in the middle # of a terminfo/termcap entry (this feature had to be sacrificed in order # to allow standard terminfo and termcap syntax to be generated cleanly from # the master format). Individual capabilities are commented out by # placing a period between the colon and the capability name. # # The file is divided up into major sections (headed by lines beginning with # the string "########") and minor sections (beginning with "####"); do # # grep "^####" | more # # to see a listing of section headings. The intent of the divisions is # (a) to make it easier to find things, and (b) to order the database so # that important and frequently-encountered terminal types are near the # front (so that you'll get reasonable search efficiency from a linear # search of the termcap form even if you don't use reorder). Minor sections # usually correspond to manufacturers or standard terminal classes. # Parenthesized words following manufacturer names are type prefixes or # product line names used by that manufacturers. # # HOW TO READ THE ENTRIES: # # The first name in an entry is the canonical name for the model or # type, last entry is a verbose description. Others are mnemonic synonyms for # the terminal. # # Terminal names look like - # The part to the left of the dash, if a dash is present, describes the # particular hardware of the terminal. The part to the right may be used # for flags indicating special ROMs, extra memory, particular terminal modes, # or user preferences. # # All names should be in lower case, for consistency in typing. # # The following are conventionally used suffixes: # -2p Has two pages of memory. Likewise 4p, 8p, etc. # -am Enable auto-margin. # -m Monochrome. Suppress color support # -mc Magic-cookie. Some terminals (notably older Wyses) can # only support one attribute without magic-cookie lossage. # Their base entry is usually paired with another that # uses magic cookies to support multiple attributes. # -nam No auto-margin - suppress capability # -nl No labels - suppress soft labels # -ns No status line - suppress status line # -rv Terminal in reverse video mode (black on white) # -s Enable status line. # -vb Use visible bell () rather than . # -w Wide - in 132 column mode. # If a name has multiple suffixes and one is a line height, that one should # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. # # Entries with embedded plus signs are designed to be included through use/tc # capabilities, not used as standalone entries. # # To avoid search clashes, some older all-numeric names for terminals have # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). # All primary names of terminals now have alphanumeric prefixes. # # Comments marked "esr" are mostly results of applying the termcap-compiler # code packaged with ncurses and contemplating the resulting error messages. # In many cases, these indicated obvious fixes to syntax garbled by the # composers. In a few cases, I was able to deduce corrected forms for garbled # capabilities by looking at context. All the information in the original # entries is preserved in the comments. # # In the comments, terminfo capability names are bracketed with <> (angle # brackets). Termcap capability names are bracketed with :: (colons). # # INTERPRETATION OF USER CAPABILITIES # # The System V Release 4 and XPG4 terminfo format defines ten string # capabilities for use by applications, .... In this file, we use # certain of these capabilities to describe functions which are not covered # by terminfo. The mapping is as follows: # # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) # u8 terminal answerback description # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) # # The terminal enquire string should elicit an answerback response # from the terminal. Common values for will be ^E (on older ASCII # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). # # The cursor position request () string should elicit a cursor position # report. A typical value (for VT100 terminals) is \E[6n. # # The terminal answerback description (u8) must consist of an expected # answerback string. The string may contain the following scanf(3)-like # escapes: # # %c Accept any character # %[...] Accept any number of characters in the given set # # The cursor position report () string must contain two scanf(3)-style # %d format elements. The first of these must correspond to the Y coordinate # and the second to the %d. If the string contains the sequence %i, it is # taken as an instruction to decrement each value after reading it (this is # the inverse sense from the cup string). The typical CPR value is # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). # # These capabilities are used by tack(1m), the terminfo action checker # (distributed with ncurses 5.0). # # TABSET FILES # # All the entries in this file have been edited to assume that the tabset # files directory is /usr/share/tabset, in conformance with the File Hierarchy # Standard for Linux and open-source BSD systems. Some vendors (notably Sun) # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. # # No curses package we know of actually uses these files. If their location # is an issue, you will have to hand-patch the file locations before compiling # this file. # # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL # # As the ANSI/ECMA-48 standard and variants take firmer hold, and as # character-cell terminals are increasingly replaced by X displays, much of # this file is becoming a historical document (this is part of the reason for # the new organization, which puts ANSI types, xterm, Unix consoles, # and vt100 up front in confidence that this will catch 95% of new hardware). # # For the terminal types still alive, I'd like to have manufacturer's # contact data (Internet address and/or snail-mail + phone). # # I'm also interested in enriching the comments so that the latter portions of # the file do in fact become a potted history of VDT technology as seen by # UNIX hackers. Ideally, I'd like the headers for each manufacturer to # include its live/dead/out-of-the-business status, and for as many # terminal types as possible to be tagged with information like years # of heaviest use, popularity, and interesting features. # # I'm especially interested in identifying the obscure entries listed under # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal # wisdom about them gets lost. If you know a lot about obscure old terminals, # please go to the terminfo resource page, grab the UFO file (ufo.ti), and # eyeball it for things you can identify and describe. # # If you have been around long enough to contribute, please read the file # with this in mind and send me your annotations. # # COPYRIGHTS AND OTHER DELUSIONS # # The BSD ancestor of this file had a standard Regents of the University of # California copyright with dates from 1980 to 1993. # # Some information has been merged in from a terminfo file SCO distributes. # It has an obnoxious boilerplate copyright which I'm ignoring because they # took so much of the content from the ancestral BSD versions of this file # and didn't attribute it, thereby violating the BSD Regents' copyright. # # Not that anyone should care. However many valid functions copyrights may # serve, putting one on a termcap/terminfo file with hundreds of anonymous # contributors makes about as much sense as copyrighting a wall-full of # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. # # This file deliberately has no copyright. It belongs to no one and everyone. # If you claim you own it, you will merely succeed in looking like a fool. # Use it as you like. Use it at your own risk. Copy and redistribute freely. # There are no guarantees anywhere. Svaha! # ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES # # This section describes terminal classes and brands that are still # quite common. # #### Specials # # Special "terminals". These are used to label tty lines when you don't # know what kind of terminal is on it. The characteristics of an unknown # terminal are the lowest common denominator - they look about like a ti 700. # dumb|80-column dumb tty, am, cols#80, bel=^G, cr=^M, cud1=^J, ind=^J, unknown|unknown terminal type, gn, use=dumb, lpr|printer|line printer, OTbs, hc, os, cols#132, lines#66, bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, glasstty|classic glass tty interpreting ASCII control characters, OTbs, am, cols#80, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, kcud1=^J, nel=^M^J, .kbs=^H, vanilla|dumb tty, OTbs, bel=^G, cr=^M, cud1=^J, ind=^J, # This is almost the same as "dumb", but with no prespecified width. # DEL and ^C are hardcoded to act as kill characters. # ^D acts as a line break (just like newline). # It also interprets # \033];xxx\007 # for compatibility with xterm -TD 9term|Plan9 terminal emulator for X, am, OTnl=^J, bel=^G, cud1=^J, #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities # # See the end-of-file comment for more on these. # # ANSI capabilities are broken up into pieces, so that a terminal # implementing some ANSI subset can use many of them. ansi+local1, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, ansi+local, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, use=ansi+local1, ansi+tabs, cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, ansi+inittabs, it#8, use=ansi+tabs, ansi+erase, clear=\E[H\E[J, ed=\E[J, el=\E[K, ansi+rca, hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, ansi+cup, cup=\E[%i%p1%d;%p2%dH, home=\E[H, ansi+rep, rep=%p1%c\E[%p2%{1}%-%db, ansi+idl1, dl1=\E[M, il1=\E[L, ansi+idl, dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, ansi+idc, dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, ansi+arrows, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ansi+sgr|ansi graphic renditions, blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, sgr0=\E[0m, ansi+sgrso|ansi standout only, rmso=\E[m, smso=\E[7m, ansi+sgrul|ansi underline only, rmul=\E[m, smul=\E[4m, ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, bold=\E[1m, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, dim=\E[2m, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, ansi+pp|ansi printer port, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ansi+csr|ansi scroll-region plus cursor save & restore, csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, # The IBM PC alternate character set. Plug this into any Intel console entry. # We use \E[11m for rmacs rather than \E[12m so the string can use the # ROM graphics for control characters such as the diamond, up- and down-arrow. # This works with the System V, Linux, and BSDI consoles. It's a safe bet this # will work with any Intel console, they all seem to have inherited \E[11m # from the ANSI.SYS de-facto standard. klone+acs|alternate character set for ansi.sys displays, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, rmacs=\E[10m, smacs=\E[11m, # Highlight controls corresponding to the ANSI.SYS standard. Most # console drivers for Intel boxes obey these. Makes the same assumption # about \E[11m as klone+acs. True ANSI/ECMA-48 would have , # , but this isn't a documented feature of ANSI.SYS. klone+sgr|attribute control for ansi.sys displays, blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, use=klone+acs, # Most Intel boxes do not treat "invis" (invisible) text. klone+sgr8|attribute control for ansi.sys displays, invis=\E[8m, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=klone+sgr, # Highlight controls corresponding to the ANSI.SYS standard. *All* # console drivers for Intel boxes obey these. Does not assume \E[11m will # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS # diamond and arrow characters under curses. klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, use=klone+acs, # KOI8-R (RFC1489) acs (alternate character set) # From: Qing Long , 24 Feb 1996. klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, rmacs=\E[10m, smacs=\E[11m, # ANSI.SYS color control. The setab/setaf caps depend on the coincidence # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer # but equivalent strings that don't rely on that coincidence: # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. # They match a subset of ECMA-48. klone+color|color control for ansi.sys and ISO6429-compatible displays, colors#8, ncv#3, pairs#64, op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, # This is better than klone+color, it doesn't assume white-on-black as the # default color pair, but many `ANSI' terminals don't grok the cap. ecma+color|color control for ECMA-48-compatible terminals, AX, colors#8, ncv#3, pairs#64, op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, # Attribute control for ECMA-48-compatible terminals ecma+sgr|attribute capabilities for true ECMA-48 terminals, rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, # For comparison, here are all the capabilities implied by the Intel # Binary Compatibility Standard (level 2) that fit within terminfo. # For more detail on this rather pathetic standard, see the comments # near the end of this file. ibcs2|Intel Binary Compatibility Standard prescriptions, cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, #### ANSI/ECMA-48 terminals and terminal emulators # # See near the end of this file for details on ANSI conformance. # Don't mess with these entries! Lots of other entries depend on them! # # This section lists entries in a least-capable to most-capable order. # if you're in doubt about what `ANSI' matches yours, try them in that # order and back off from the first that breaks. # ansi-mr is for ANSI terminals with ONLY relative cursor addressing # and more than one page of memory. It uses local motions instead of # direct cursor addressing, and makes almost no assumptions. It does # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. ansi-mr|mem rel cup ansi, am, xon, cols#80, lines#24, use=vanilla, use=ansi+erase, use=ansi+local1, # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but # beware of screen size problems and memory relative cursor addressing. ansi-mini|any ansi terminal with pessimistic assumptions, am, xon, cols#80, lines#24, use=vanilla, use=ansi+cup, use=ansi+erase, # ansi-mtabs adds relative addressing and minimal tab support ansi-mtabs|any ansi terminal with pessimistic assumptions, it#8, ht=^I, use=ansi+local1, use=ansi-mini, # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL # # The following is an entry for the full ANSI 3.64 (1977). It lacks # padding, but most terminals using the standard are "fast" enough # not to require any -- even at 9600 bps. If you encounter problems, # try including the padding specifications. # # Note: the :as: and :ae: specifications are not implemented here, for # the available termcap documentation does not make clear WHICH alternate # character set to specify. ANSI 3.64 seems to make allowances for several. # Please make the appropriate adjustments to fit your needs -- that is # if you will be using alternate character sets. # # There are very few terminals running the full ANSI 3.64 standard, # so I could only test this entry on one verified terminal (Visual 102). # I would appreciate the results on other terminals sent to me. # # Please report comments, changes, and problems to: # # U.S. MAIL: Hugh Hansard # Box: 22830 # Emory University # Atlanta, GA. 30322. # # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. # # (Added vt100 , to quiet a tic warning --esr) ansi77|ansi 3.64 standard 1977 version, OTbs, am, mir, cols#80, it#8, lines#24, bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, smso=\E[7m, smul=\E[4m, # Procomm and some other ANSI emulations don't recognize all of the ANSI- # standard capabilities. This entry deletes , , , , and # / capabilities, forcing curses to use repetitions of , # , and . Also deleted and , as QModem up to # 5.03 doesn't recognize these. Finally, we delete and , which seem # to confuse many emulators. On the other hand, we can count on these programs # doing //. Older versions of this entry featured # , but now seems to be more common under # ANSI.SYS influence. # From: Eric S. Raymond Oct 30 1995 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), OTbs, am, mir, msgr, cols#80, it#8, lines#24, bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, use=klone+sgr-dumb, pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), lines#25, use=pcansi-m, pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), lines#33, use=pcansi-m, pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), lines#43, use=pcansi-m, # The color versions. All PC emulators do color... pcansi|ibm-pc terminal programs claiming to be ansi, use=klone+color, use=pcansi-m, pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, lines#25, use=pcansi, pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, lines#33, use=pcansi, pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, lines#43, use=pcansi, # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. # If you want pound signs rather than dollars, replace `B' with `A' # in the , , , and capabilities. # From: Eric S. Raymond Nov 6 1995 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, mc5i, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g, vpa=\E[%i%p1%dd, use=pcansi-m, ansi+enq|ncurses extension for ANSI ENQ, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, u9=\E[c, # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in # standard terminfo. Assumes ANSI.SYS-compatible attributes and color. # From: Eric S. Raymond Nov 6 1995 ansi|ansi/pc-term compatible with color, use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, # ansi-generic is a vanilla ANSI terminal. This is assumed to implement # all the normal ANSI stuff with no extensions. It assumes # insert/delete line/char is there, so it won't work with # vt100 clones. It assumes video attributes for bold, blink, # underline, and reverse, which won't matter much if the terminal # can't do some of those. Padding is assumed to be zero, which # shouldn't hurt since xon/xoff is assumed. ansi-generic|generic ansi standard terminal, am, xon, cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, use=ansi+rca, use=ansi+erase, use=ansi+tabs, use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, use=ansi+sgrbold, use=ansi+arrows, #### DOS ANSI.SYS variants # # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS # documentation (except for the keyboard key reassignment feature, which # doesn't fit the model well). The klone+acs sequences were valid # though undocumented. The capability is untested but should work for # keys F1-F10 (%p1 values outside this range will yield unpredictable results). # From: Eric S. Raymond Nov 7 1995 ansi.sys-old|ANSI.SYS under PC-DOS 2.1, OTbs, am, mir, msgr, xon, cols#80, lines#25, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, u7=\E[6n, use=klone+color, use=klone+sgr8, # Keypad: Home=\0G Up=\0H PrPag=\0I # ka1,kh kcuu1 kpp,ka3 # # Left=\0K 5=\0L Right=\0M # kcub1 kb2 kcuf1 # # End=\0O Down=\0P NxPag=\0Q # kc1,kend kcud1 kc3,knp # # Ins=\0R Del=\0S # kich1 kdch1 # # On keyboard with 12 function keys, # shifted f-keys: F13-F24 # control f-keys: F25-F36 # alt f-keys: F37-F48 # The shift/control/alt keys do not modify each other, but alt overrides both, # and control overrides shift. # # capability for F1-F48 -TD ansi.sys|ANSI.SYS 3.1 and later versions, el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p, use=ansi.sys-old, # # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. # This should only be used when the terminal emulator cannot redefine the keys. # Since redefining keys with ansi.sys also affects PC-DOS programs, the key # definitions must be restored. If the terminal emulator is quit while in vi # or others using /, the keypad will not be defined as per PC-DOS. # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. # Note that is always BS, because PC-dos can tolerate this change. # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. # Consequently the End keypad key could not be set (it is relatively safe and # actually useful because it sends ^@ O, which beeps and opens a line above). ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, use=ansi.sys, # # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys, # # See ansi.sysk and nansi.sys above. nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, use=ansi.sysk, #### ANSI console types # # Atari ST terminals. # From Guido Flohr . # tw52|tw52-color|Toswin window manager with color, bce, colors#16, pairs#256, oc=\Eb?\Ec0, op=\Eb?\Ec0, setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, use=tw52-m, tw52-m|Toswin window manager monochrome, ul, ma#999, bold=\Eya, dch1=\Ea, dim=\EyB, is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, smso=\EyQ, smul=\EyH, use=at-m, tt52|Atari TT medium and high resolution, lines#30, use=at-color, st52-color|at-color|atari-color|atari_st-color|Atari ST with color, bce, colors#16, pairs#256, is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, use=st52, st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, am, eo, mir, npc, cols#80, it#8, lines#24, bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, tw100|toswin vt100 window mgr, eo, mir, msgr, xon, colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177, kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, sc=\E7, setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # The entries for stv52 and stv52pc probably need a revision. stv52|MiNT virtual console, am, msgr, cols#80, it#8, lines#30, bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, stv52pc|MiNT virtual console with PC charset, am, msgr, cols#80, it#8, lines#30, acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371, bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, #### Atari ST # # From: Simson L. Garfinkel atari-old|atari st, OTbs, am, cols#80, it#8, lines#25, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode # From: Paul M. Aoki uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, lines#49, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220, # MiNT VT52 emulation. 80 columns, 25 rows. # MiNT is Now TOS, the operating system which comes with all Ataris now # (mainly Atari Falcon). This termcap is for the VT52 emulation you get # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode # From: Per Persson , 27 Feb 1996 st52-old|Atari ST with VT52 emulation, am, km, cols#80, lines#25, bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, smcup=\Ee, smso=\Ep, #### BeOS # # BeOS entry for Terminal program Seems to be almost ANSI beterm|BeOS Terminal, am, eo, mir, msgr, xenl, xon, colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd, #### Linux consoles # # This entry is good for the 1.2.13 or later version of the Linux console. # # *************************************************************************** # * * # * WARNING: * # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * # * character. Here are the keymap replacement lines that will set this up: * # * * # keycode 15 = Tab Tab # alt keycode 15 = Meta_Tab # shift keycode 15 = F26 # string F26 ="\033[Z" # * * # * This has to use a key slot which is unfortunate (any unused one will * # * do, F26 is the higher-numbered one). The change ought to be built * # * into the kernel tables. * # * * # *************************************************************************** # # All linux kernels since 1.2.13 (at least) set the screen size # themselves; this entry assumes that capability. # linux-basic|linux console, am, bce, eo, mir, msgr, xenl, xon, it#8, ncv#18, U8#1, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m, smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, use=ecma+color, linux-m|Linux console no color, colors@, pairs@, setab@, setaf@, setb@, setf@, use=linux, # The 1.3.x kernels add color-change capabilities; if yours doesn't have this # and it matters, turn off . The %02x escape used to implement this is # not supposedly back-portable to older SV curses (although it has worked fine # on Solaris for several years) and not supported in ncurses versions before # 1.9.9. linux-c-nc|linux console with color-change, ccc, initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, oc=\E]R, use=linux-basic, # From: Dennis Henriksen , 9 July 1996 linux-c|linux console 1.3.6+ for older ncurses, ccc, initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, oc=\E]R, use=linux-basic, # The 2.2.x kernels add a private mode that sets the cursor type; use that to # get a block cursor for cvvis. # reported by Frank Heckenbach . linux2.2|linux 2.2.x console, civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, cvvis=\E[?25h\E[?8c, use=linux-c-nc, # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html # Using SI/SO has the drawback that it confuses screen. SCS would work. # However, SCS is buggy (see comment in Debian #515609) -TD linux2.6|linux 2.6.x console, rmacs=^O, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, use=linux2.2, # The 3.0 kernel adds support for clearing scrollback buffer (capability E3). linux3.0|linux 3.0 kernels, E3=\E[3;J, use=linux2.6, # This is Linux console for ncurses. linux|linux console, use=linux3.0, # Subject: linux 2.6.26 vt back_color_erase # Changes to the Linux console driver broke bce model as reported in # https://bugzilla.novell.com/show_bug.cgi?id=418613 # apparently from # http://lkml.org/lkml/2008/4/26/305 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e linux2.6.26|linux console w/o bce, bce@, use=linux2.6, # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file linux-nic|linux with ich/ich1 suppressed for non-curses programs, ich@, ich1@, use=linux, # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. # acsc entry from Pavel Roskin" , 29 Sep 1997. linux-koi8|linux with koi8 alternate character set, acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, use=linux, use=klone+koi8acs, # Another entry for KOI8-r with Qing Long's acsc. # (which one better complies with the standard?) linux-koi8r|linux with koi8-r alternate character set, use=linux, use=klone+koi8acs, # Entry for the latin1 and latin2 fonts linux-lat|linux with latin1 or latin2 alternate character set, acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, use=linux, # This uses graphics from VT codeset instead of from cp437. # reason: cp437 (aka "straight to font") is not functional under luit. # from: Andrey V Lukyanov . linux-vt|linux console using VT codes for graphics, acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, smpch@, use=linux, # This is based on the Linux console (relies on the console to perform some # of the functionality), but does not recognize as many control sequences. # The program comes bundled with an old (circa 1998) copy of the Linux # console terminfo. It recognizes some non-ANSI/VT100 sequences such as # \E* move cursor to home, as as \E[H # \E,X same as \E(X # \EE move cursor to beginning of row # \E[y,xf same as \E[y,xH # # Note: The status-line support is buggy (dsl does not work). kon|kon2|jfbterm|Kanji ON Linux console, ccc@, hs, civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@, initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, use=linux, # 16-color linux console entry; this works with a 256-character # console font but bright background colors turn into dim ones when # you use a 512-character console font. This uses bold for bright # foreground colors and blink for bright background colors. linux-16color|linux console with 16 colors, colors#16, ncv#54, pairs#256, setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m, setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m, use=linux, # bterm (bogl 0.1.18) # Implementation is in bogl-term.c # Key capabilities from linux terminfo entry # # Notes: # bterm only supports acs using wide-characters, has case for these: qjxamlkut # bterm does not support sgr, since it only processes one parameter -TD bterm|bogl virtual terminal, am, bce, colors#8, cols#80, lines#24, pairs#64, acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, #### Mach # # From: Matthew Vernon mach|Mach Console, am, km, cols#80, it#8, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, mach-bold|Mach Console with bold instead of underline, rmul=\E[0m, smul=\E[1m, use=mach, mach-color|Mach Console with ANSI color, colors#8, pairs#64, dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, # From: Samuel Thibault # Source: git://git.sv.gnu.org/hurd/gnumach.git # Files: i386/i386at/kd.c # # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD mach-gnu|GNU Mach, acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT, sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m, use=mach, mach-gnu-color|Mach Console with ANSI color, colors#8, pairs#64, op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach-gnu, # From: Marcus Brinkmann # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ # # Comments in the original are summarized here: # # hurd uses 8-bit characters (km). # # Although it doesn't do XON/XOFF, we don't want padding characters (xon). # # Regarding compatibility to vt100: hurd doesn't specify , as we don't # have the eat_newline_glitch. It doesn't support setting or removing tab # stops (hts/tbc). # # hurd uses ^H instead of \E[D for cub1, as only ^H implements and it is # one byte instead three. # # is not included because hurd has insert mode. # # hurd doesn't use ^J for scrolling, because this could put things into the # scrollback buffer. # # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. # This is a GNU extension. # # The original has commented-out ncv, but is restored here. # # Reading the source, RIS resets cnorm, but not xmous. hurd|The GNU Hurd console server, am, bce, bw, eo, km, mir, msgr, xon, colors#8, it#8, ncv#18, pairs#64, acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h, #### OSF Unix # # OSF/1 1.1 Snapshot 2 pmcons|pmconsole|PMAX console, am, cols#128, lines#57, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, # SCO console and SOS-Syscons console for 386bsd # (scoansi: had unknown capabilities # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based # on the =\E[12m -- esr) # # klone+sgr-dumb is an error since the acsc does not match -TD # # In this description based on SCO's keyboard(HW) manpage list of default # function key values: # F13-F24 are shifted F1-F12 # F25-F36 are control F1-F12 # F37-F48 are shift+control F1-F12 # # hpa/vpa work in the console, but not in scoterm: # hpa=\E[%p1%dG, # vpa=\E[%p1%dd, # # SCO's terminfo uses # kLFT=\E[d, # kRIT=\E[c, # which do not work (console or scoterm). # # Console documents only 3 attributes can be set with SGR (so we don't use sgr). scoansi-old|SCO Extended ANSI standard crt (5.0.5), OTbs, am, bce, eo, xon, colors#8, cols#80, it#8, lines#25, pairs#64, acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, scoansi-new|SCO Extended ANSI standard crt (5.0.6), km, civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, rep=\E[%p1%d;%p2%db, rmm=\E[=11L, sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, use=scoansi-old, # make this easy to change... scoansi|SCO Extended ANSI standard crt, use=scoansi-old, # This actually describes the generic SVr4 display driver for Intel boxes. # The isn't documented and therefore may not be reliable. # From: Eric Raymond Mon Nov 27 19:00:53 EST 1995 att6386|at386|386at|AT&T WGS 6386 console, am, bw, eo, xon, cols#80, it#8, lines#25, acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, sc=\E7, sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color, # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) pc6300plus|AT&T 6300 plus, OTbs, am, xon, cols#80, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # From: Benjamin C. W. Sittler # # I have a UNIX PC which I use as a terminal attached to my Linux PC. # Unfortunately, the UNIX PC terminfo entry that comes with ncurses # is broken. All the special key sequences are broken, making it unusable # with Emacs. The problem stems from the following: # # The UNIX PC has a plethora of keys (103 of them, and there's no numeric # keypad!), loadable fonts, and strange highlighting modes ("dithered" # half-intensity, "smeared" bold, and real strike-out, for example.) It also # uses resizable terminal windows, but the bundled terminal program always # uses an 80x24 window (and doesn't support seem to support a 132-column # mode.) # # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a # library which was a superset of SVr3.5 curses (called tam, for "terminal # access method".) tam includes support for real, overlapping windows, # onscreen function key labels, and bitmap graphics. But since the primary # user interface on the UNIX PC was a GUI program (ua, for "user # assistant",) and remote administration was considered important for the # machine, tam also supported VT100-compatible terminals attached to the # serial port or used across the StarLan network. To simulate the extra keys # not present on a VT100, users could press ESC and a two-letter sequence, # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, # however, were not the same as those sent by the actual Undo key. The # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. # (If you're interested in adding some of the tam calls to ncurses, btw, I # have the full documentation and several programs which use tam. It also # used an extended terminfo format to describe key sequences, special # highlighting modes, etc.) # # KEYS: This means that ncurses would quite painful on the UNIX PC, since # there are two sequences for every key-modifier combination (local keyboard # sequence and remote "VT100" sequence.) But I doubt many people are trying # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) # seem to have been built from the manual describing the VT100 sequences. # This means it doesn't work for a real live UNIX PC. # # FONTS: The UNIX PC also has a strange interpretation of "alternate # character set". Rather than the VT100 graphics you might expect, it allows # up to 8 custom fonts to be loaded at any given time. This means that # programs expecting VT100 graphics will usually be disappointed. For this # reason I have disabled the smacs/rmacs sequences, but they could easily be # re-enabled. Here are the relevant control sequences (from the ESCAPE(7) # manpage), should you wish to do so: # # SGR10 - Select font 0 - ESC [ 10 m or SO # SGR11 - Select font 1 - ESC [ 11 m or SI # SGR12 - Select font 2 - ESC [ 12 m # ... (etc.) # SGR17 - Select font 7 - ESC [ 17 m # # Graphics for line drawing are not reliably found at *any* character # location because the UNIX PC has dynamically reloadable fonts. I use font # 0 for regular text and font 1 for italics, but this is by no means # universal. So ASCII line drawing is in order if smacs/rmacs are enabled. # # MISC: The cursor visible/cursor invisible sequences were swapped in the # distributed terminfo. # # To ameliorate these problems (and fix a few highlighting bugs) I rewrote # the UNIX PC terminfo entry. The modified version works great with Lynx, # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC # attached by serial cable. In Emacs, even the Undo key works, and many # applications can now use the F1-F8 keys. # # esr's notes: # Terminfo entry for the AT&T Unix PC 7300 # from escape(7) in Unix PC 7300 Manual. # Somewhat similar to a vt100-am (but different enough # to redo this from scratch.) # # /*************************************************************** # * # * FONT LOADING PROGRAM FOR THE UNIX PC # * # * This routine loads a font defined in the file ALTFONT # * into font memory slot #1. Once the font has been loaded, # * it can be used as an alternative character set. # * # * The call to ioctl with the argument WIOCLFONT is the key # * to this routine. For more information, see window(7) in # * the PC 7300 documentation. # ***************************************************************/ # #include /* needed for strcpy call */ # #include /* needed for ioctl call */ # #define FNSIZE 60 /* font name size */ # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ # /* # * The file /usr/lib/wfont/special.8.ft comes with the # * standard PC software. It defines a graphics character set # * similar to that of the Teletype 5425 terminal. To view # * this or other fonts in /usr/lib/wfont, use the command # * cfont . For further information on fonts see # * cfont(1) in the PC 7300 documentation. # */ # # struct altfdata /* structure for alt font data */ # { # short altf_slot; /* memory slot number */ # char altf_name[FNSIZE]; /* font name (file name) */ # }; # ldfont() # { # int wd; /* window in which altfont will be */ # struct altfdata altf; # altf.altf_slot=1; # strcpy(altf.altf_name,ALTFONT); # for (wd =1; wd < 12; wd++) { # ioctl(wd, WIOCLFONT,&altf); # } # } # # (att7300: added /// from the BSDI entry, # they're confirmed by the man page for the System V display---esr) # att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, am, xon, cols#80, it#8, lines#24, bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, smul=\E[4m, # Sent by Stefan Stapelberg , 24 Feb 1997, this is # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes # for the application keypad mode. We have added iris-ansi-ap rather than # change the original to keypad mode. # # (iris-ansi: added rmam/smam based on init string -- esr) # # This entry, and those derived from it, is used in xwsh (also known as # winterm). Some capabilities that do not fit into the terminfo model # include the shift- and control-functionkeys: # # F1-F12 generate different codes when shift or control modifiers are used. # For example: # F1 \E[001q # shift F1 \E[013q # control-F1 \E[025q # # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., # \EOP to \EOS. The shifted and control modifiers still do the same thing. # # The cursor keys also have different codes: # control-up \E[162q # control-down \E[165q # control-left \E[159q # control-right \E[168q # # shift-up \E[161q # shift-down \E[164q # shift-left \E[158q # shift-right \E[167q # # control-tab \[072q # iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), am, cols#80, it#8, lines#40, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, iris-ansi-ap|IRIS ANSI in application-keypad mode, is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX # (T.Dickey 98/1/24) iris-color|xwsh|IRIX ANSI with color, ncv#33, csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, rmul=\E[24m, rs1=\Ec, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sitm=\E[3m, use=vt100+enq, use=klone+color, use=iris-ansi-ap, # The following is a version of the ibm-pc entry distributed with PC/IX, # (Interactive Systems' System 3 for the Big Blue), modified by Richard # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, # (the former is untrue, and the latter failed under UCB/man); standout and # underline modes have been added. Note: this entry describes the "native" # capabilities of the PC monochrome display, without ANY emulation; most # communications packages (but NOT PC/IX connect) do some kind of emulation. pcix|PC/IX console, am, bw, eo, cols#80, lines#24, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, # (ibmpcx: this entry used to be known as ibmx. # It formerly included the following extension capabilities: # :GC=b:GL=v:GR=t:RT=^J:\ # :GH=\E[196g:GV=\E[179g:\ # :GU=\E[193g:GD=\E[194g:\ # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match # what was there before. -- esr) ibmpcx|xenix|ibmx|IBM PC xenix console display, OTbs, am, msgr, cols#80, lines#25, clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, kpp=\E[Z, use=klone+acs, use=klone+sgr8, #### QNX # # QNX 4.0 Console # Michael's original version of this entry had , , # ; this was so terminfo applications could write the lower # right corner without triggering a scroll. The ncurses terminfo library can # handle this case with the capability, and prefers for better # optimization. Bug: The capability resets attributes. # From: Michael Hunter 30 Jul 1996 # (removed: ) qnx|qnx4|qnx console, daisy, km, mir, msgr, xhpa, xt, colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, kDL=\377\366, kEND=\377\301, kEOL=\377\311, kEXT=\377\367, kFND=\377\370, kHLP=\377\371, kHOM=\377\260, kIC=\377\340, kLFT=\377\264, kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, kRDO=\377\315, kRES=\377\374, kRIT=\377\266, kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, kclo=\377\343, kclr=\377\341, kcmd=\377\245, kcpy=\377\265, kcrt=\377\305, kctab=\377\237, kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, kext=\377\270, kf1=\377\201, kf10=\377\212, kf11=\377\256, kf12=\377\257, kf13=\377\213, kf14=\377\214, kf15=\377\215, kf16=\377\216, kf17=\377\217, kf18=\377\220, kf19=\377\221, kf2=\377\202, kf20=\377\222, kf21=\377\223, kf22=\377\224, kf23=\377\333, kf24=\377\334, kf25=\377\225, kf26=\377\226, kf27=\377\227, kf28=\377\230, kf29=\377\231, kf3=\377\203, kf30=\377\232, kf31=\377\233, kf32=\377\234, kf33=\377\235, kf34=\377\236, kf35=\377\276, kf36=\377\277, kf37=\377\321, kf38=\377\322, kf39=\377\323, kf4=\377\204, kf40=\377\324, kf41=\377\325, kf42=\377\326, kf43=\377\327, kf44=\377\330, kf45=\377\331, kf46=\377\332, kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, khlp=\377\350, khome=\377\240, khts=\377\342, kich1=\377\253, kil1=\377\273, kind=\377\261, kmov=\377\351, kmrk=\377\355, kmsg=\377\345, knp=\377\252, knxt=\377\312, kopn=\377\357, kopt=\377\353, kpp=\377\242, kprt=\377\255, kprv=\377\302, krdo=\377\336, kref=\377\354, kres=\377\360, krfr=\377\347, kri=\377\271, krmir=\377\313, krpl=\377\362, krst=\377\352, ksav=\377\361, kslt=\377\247, kspd=\377\335, ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, smso=\E(, smul=\E[, # # qnxt|qnxt4|QNX4 terminal, crxm, use=qnx4, # qnxm|QNX4 with mouse events, maddr#1, chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, smicm=\E/>2h, use=qnx4, # qnxw|QNX4 windows, xvpa, use=qnxm, # # Monochrome QNX4 terminal or console. Setting this terminal type will # allow an application running on a color console to behave as if it # were a monochrome terminal. Output will be through stdout instead of # console writes because the term routines will recognize that the # terminal name starts with 'qnxt'. # qnxtmono|Monochrome QNX4 terminal or console, colors@, pairs@, scp@, use=qnx4, # From: Federico Bianchi , 1 Jul 1998 # (esr: commented out and to avoid warnings.) # (TD: derive from original qnx4 entry) qnxt2|qnx 2.15 serial terminal, am, civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, # QNX ANSI terminal definition qansi-g|QNX ANSI, am, eslok, hs, xon, colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, # qansi|QNX ansi with console writes, daisy, xhpa, use=qansi-g, # qansi-t|QNX ansi without console writes, crxm, use=qansi, # qansi-m|QNX ansi with mouse, maddr#1, chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, smicm=\E[>2h, use=qansi, # qansi-w|QNX ansi for windows, xvpa, use=qansi-m, #### OpenBSD consoles # # From: Alexei Malinin ; October, 2011. # # The following terminal descriptions for the AMD/Intel PC console # were prepared based on information contained in the OpenBSD-4.9 # termtypes.master and wscons(4) & vga(4) manuals (2010, November). # # Added bce based on testing with tack -TD # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD # Changed kbs to DEL and removed keys that duplicate stty settings -TD # pccon+keys|OpenBSD PC keyboard keys, kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krfr=^R, pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console, acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console, acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, enacs=\E)0$<5>, rmacs=\E(B$<5>, sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>, sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>, pccon+colors|ANSI colors for OpenBSD PC console, bce, colors#8, pairs#64, op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, pccon+base|base capabilities for OpenBSD PC console, am, km, mc5i, msgr, npc, nxon, xenl, xon, cols#80, it#8, lines#24, bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics, use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys, pccon0|OpenBSD PC console with simple ASCII pseudographics, use=pccon0-m, use=pccon+colors, pccon-m|OpenBSD PC console without colors, use=pccon+base, use=pccon+sgr+acs, use=pccon+keys, pccon|OpenBSD PC console, use=pccon-m, use=pccon+colors, #### NetBSD consoles # # pcvt termcap database entries (corresponding to release 3.31) # Author's last edit-date: [Fri Sep 15 20:29:10 1995] # # (For the terminfo master file, I translated these into terminfo syntax. # Then I dropped all the pseudo-HP entries. we don't want and can't use # the :Xs: flag. Then I split :is: into a size-independent and a # size-dependent . Finally, I added / -- esr) # NOTE: has been taken out of this entry. for reference, it should # be . For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. # (esr: added and to resolve NetBSD Problem Report #4583) pcvtXX|pcvt vt200 emulator (DEC VT220), am, km, mir, msgr, xenl, it#8, vt#3, acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and # 50 lines entries; 80 columns pcvt25|dec vt220 emulation with 25 lines, cols#80, lines#25, is2=\E[1;25r\E[25;1H, use=pcvtXX, pcvt28|dec vt220 emulation with 28 lines, cols#80, lines#28, is2=\E[1;28r\E[28;1H, use=pcvtXX, pcvt35|dec vt220 emulation with 35 lines, cols#80, lines#35, is2=\E[1;35r\E[35;1H, use=pcvtXX, pcvt40|dec vt220 emulation with 40 lines, cols#80, lines#40, is2=\E[1;40r\E[40;1H, use=pcvtXX, pcvt43|dec vt220 emulation with 43 lines, cols#80, lines#43, is2=\E[1;43r\E[43;1H, use=pcvtXX, pcvt50|dec vt220 emulation with 50 lines, cols#80, lines#50, is2=\E[1;50r\E[50;1H, use=pcvtXX, # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and # 50 lines entries; 132 columns pcvt25w|dec vt220 emulation with 25 lines and 132 cols, cols#132, lines#25, is2=\E[1;25r\E[25;1H, use=pcvtXX, pcvt28w|dec vt220 emulation with 28 lines and 132 cols, cols#132, lines#28, is2=\E[1;28r\E[28;1H, use=pcvtXX, pcvt35w|dec vt220 emulation with 35 lines and 132 cols, cols#132, lines#35, is2=\E[1;35r\E[35;1H, use=pcvtXX, pcvt40w|dec vt220 emulation with 40 lines and 132 cols, cols#132, lines#40, is2=\E[1;40r\E[40;1H, use=pcvtXX, pcvt43w|dec vt220 emulation with 43 lines and 132 cols, cols#132, lines#43, is2=\E[1;43r\E[43;1H, use=pcvtXX, pcvt50w|dec vt220 emulation with 50 lines and 132 cols, cols#132, lines#50, is2=\E[1;50r\E[50;1H, use=pcvtXX, # OpenBSD implements a color variation pcvt25-color|dec vt220 emulation with 25 lines and color, cols#80, lines#25, is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, use=ecma+color, # Terminfo entries to enable the use of the ncurses library in colour on a # NetBSD-arm32 console (only tested on a RiscPC). # Created by Dave Millen 22.07.98 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected # typo in invis - TD arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), am, bce, msgr, xenl, xon, cols#80, it#8, lines#30, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, use=klone+color, arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), cols#132, lines#50, use=arm100, # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine # manufactured by Sharp for the Japenese market. # From Minoura Makoto , 12 May 1996 x68k|x68k-ite|NetBSD/x68k ITE, cols#96, lines#32, kclr=\E[9~, khlp=\E[28~, use=vt220, # : # Entry for the DNARD OpenFirmware console, close to ANSI but not quite. # # (still unfinished, but good enough so far.) ofcons|DNARD OpenFirmware console, bw, cols#80, lines#30, bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M, cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, rmso=\2330m, rmul=\2330m, sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m, sgr0=\2330m, smso=\2337m, smul=\2334m, # NetBSD "wscons" emulator in vt220 mode. # This entry is based on the NetBSD termcap entry, correcting the ncv value. # The emulator renders underlined text in red. Colors are otherwise usable. # # Testing the emulator and reading the source code (NetBSD 2.0), it appears # that "vt220" is inaccurate. There are a few vt220-features, but most of the # vt220 screens in vttest do not work with this emulator. For instance, it # identifies itself (primary DA response) as a vt220 with selective erase. But # the selective erase feature does not work. The secondary response is copied # from Kermit's emulation of vt220, does not correspond to actual vt220. At # the level of detail in a termcap, it is a passable emulator, since ECH does # work. Don't use it on a VMS system -TD wsvt25|NetBSD wscons in 25 line DEC VT220 mode, bce, msgr, colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220, wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, km, use=wsvt25, # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and # DECstation/pmax. rcons|BSD rasterconsole, use=sun-il, # Color version of above. Color currently only provided by NetBSD. rcons-color|BSD rasterconsole with ANSI color, bce, colors#8, pairs#64, op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, # mgterm -- MGL/MGL2, MobileGear Graphic Library # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} # -- the setf/setb are probably incorrect, more likely setaf/setab -TD # -- compare with cons25w mgterm, OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, colors#8, cols#80, it#8, lines#18, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, #### FreeBSD console entries # # From: Andrey Chernov 29 Mar 1996 # Andrey Chernov maintains the FreeBSD termcap distributions. # # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade # or comment out the :cb: capability in the console entry. # # Alexander Lukyanov reports: # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. # Now el1 clears not only to the line beginning, but also a large chunk # of previous line. But there is another bug - ech does not work at all. # # for syscons # common entry without semigraphics # Bug: The capability resets attributes. # Bug? The ech and el1 attributes appear to move the cursor in some cases; for # instance el1 does if the cursor is moved to the right margin first. Removed # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) # # Setting colors turns off reverse; we cannot guarantee order, so use ncv. # Note that this disables standout with color. # # The emulator sends difference strings based on shift- and control-keys, # like scoansi: # F13-F24 are shifted F1-F12 # F25-F36 are control F1-F12 # F37-F48 are shift+control F1-F12 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), am, bce, bw, eo, msgr, npc, colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, use=cons25w, cons25-debian|freebsd console with debian backspace (25-line ansi mode), kbs=\177, kdch1=\E[3~, use=cons25, cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), colors@, pairs@, bold@, dim@, op@, rmul=\E[m, setab@, setaf@, sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, smul=\E[4m, use=cons25, cons30|ansi80x30|freebsd console (30-line ansi mode), lines#30, use=cons25, cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), lines#30, use=cons25-m, cons43|ansi80x43|freebsd console (43-line ansi mode), lines#43, use=cons25, cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), lines#43, use=cons25-m, cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), lines#50, use=cons25, cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), lines#50, use=cons25-m, cons60|ansi80x60|freebsd console (60-line ansi mode), lines#60, use=cons25, cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), lines#60, use=cons25-m, cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, use=cons25w, cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), colors@, pairs@, op@, rmul=\E[m, setab@, setaf@, sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, smul=\E[4m, use=cons25r, cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), lines#50, use=cons25r, cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), lines#50, use=cons25r-m, cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), lines#60, use=cons25r, cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), lines#60, use=cons25r-m, # ISO 8859-1 FreeBSD console cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, use=cons25w, cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), colors@, pairs@, bold@, dim@, op@, rmul=\E[m, setab@, setaf@, sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, smul=\E[4m, use=cons25l1, cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), lines#50, use=cons25l1, cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), lines#50, use=cons25l1-m, cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), lines#60, use=cons25l1, cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), lines#60, use=cons25l1-m, #### 386BSD and BSD/OS Consoles # # This was the original 386BSD console entry (I think). # Some places it's named oldpc3|oldibmpc3. # From: Alex R.N. Wetmore origpc3|origibmpc3|IBM PC 386BSD Console, OTbs, am, bw, eo, xon, cols#80, lines#25, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, # description of BSD/386 console emulator in version 1.0 (supplied by BSDI) oldpc3|oldibmpc3|old IBM PC BSD/386 Console, OTbs, km, lines#25, bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 # Note, the emulator supports many of the additional console features # listed in the iBCS2 (e.g. character-set selection) though not all # are described here. This entry really ought to be upgraded. # Also note, the console will also work with fewer lines after doing # "stty rows NN", e.g. to use 24 lines. # (Color support from Kevin Rosenberg , 2 May 1996) # Bug: The capability resets attributes. bsdos-pc|IBM PC BSD/OS Console, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold, bsdos-pc-nobold|BSD/OS PC console w/o bold, use=klone+color, use=bsdos-pc-m, bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, OTbs, am, eo, km, xon, cols#80, it#8, lines#25, bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, use=klone+sgr8, # Old names for BSD/OS PC console used in releases before 4.1. pc3|BSD/OS on the PC Console, use=bsdos-pc-nobold, ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, use=bsdos-pc, # BSD/OS on the SPARC bsdos-sparc|Sun SPARC BSD/OS Console, use=sun, # BSD/OS on the PowerPC bsdos-ppc|PowerPC BSD/OS Console, use=bsdos-pc, #### DEC VT52 # (// capabilities aren't in DEC's official entry -- esr) # # Actually (TD pointed this out at the time the acsc string was added): # vt52 shouldn't define full acsc since most of the cells don't match. # see vt100 manual page A-31. This is the list that does match: # f degree # g plus/minus # h right-arrow # k down-arrow # m scan-1 # o scan-3 # q scan-5 # s scan-7 # The line-drawing happens to work in several terminal emulators, but should # not be used as a guide to the capabilities of the vt52. Note in particular # that vt52 does not support line-drawing characters (the scan-X values refer # to a crude plotting feature) -TD vt52|dec vt52, OTbs, cols#80, it#8, lines#24, acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, #### DEC VT100 and compatibles # # DEC terminals from the vt100 forward are collected here. Older DEC terminals # and micro consoles can be found in the `obsolete' section. More details on # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be # found near the end of this file. # # Except where noted, these entries are DEC's official terminfos. # Contact Bill Hedberg of Terminal Support # Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # # In October 1995 DEC sold its terminals business, including the VT and Dorio # line and trademark, to SunRiver Data Systems. SunRiver has since changed # its name to Boundless Technologies; see http://www.boundless.com. # # NOTE: Any VT100 emulation, whether in hardware or software, almost # certainly includes what DEC called the `Level 1 editing extension' codes; # only the very oldest VT100s lacked these and there probably aren't any of # those left alive. To capture these, use one of the VT102 entries. # # Note that the glitch in vt100 is not quite the same as on the Concept, # since the cursor is left in a different position while in the # weird state (concept at beginning of next line, vt100 at end # of this line) so all versions of vi before 3.7 don't handle # right on vt100. The correct way to handle is when # you output the char in column 80, immediately output CR LF # and then assume you are in column 1 of the next line. If # is on, am should be on too. # # I assume you have smooth scroll off or are at a slow enough baud # rate that it doesn't matter (1200? or less). Also this assumes # that you set auto-nl to "on", if you set it off use vt100-nam # below. # # The padding requirements listed here are guesses. It is strongly # recommended that xon/xoff be enabled, as this is assumed here. # # The vt100 uses and rather than // because the # tab settings are in non-volatile memory and don't need to be # reset upon login. Also setting the number of columns glitches # the screen annoyingly. You can type "reset" to get them set. # # The VT100 series terminals have cursor ("arrows") keys which can operate # in two different modes: Cursor Mode and Application Mode. Cursor Mode # is the reset state, and is assumed to be the normal state. Application # Mode is the "set" state. In Cursor Mode, the cursor keys transmit # "Esc [ {code}" sequences, conforming to ANSI standards. In Application # Mode, the cursor keys transmit "Esc O " sequences. Application Mode # was provided primarily as an aid to the porting of VT52 applications. It is # assumed that the cursor keys are normally in Cursor Mode, and expected that # applications such as vi will always transmit the string. Therefore, # the definitions for the cursor keys are made to match what the terminal # transmits after the string is transmitted. If the string # is a null string or is not defined, then cursor keys are assumed to be in # "Cursor Mode", and the cursor keys definitions should match that assumption, # else the application may fail. It is also expected that applications will # always transmit the string to the terminal before they exit. # # The VT100 series terminals have an auxiliary keypad, commonly referred to as # the "Numeric Keypad", because it is a cluster of numeric and function keys. # The Numeric Keypad which can operate in two different modes: Numeric Mode and # Application Mode. Numeric Mode is the reset state, and is assumed to be # the normal state. Application Mode is the "set" state. In Numeric Mode, # the numeric and punctuation keys transmit ASCII 7-bit characters, and the # Enter key transmits the same as the Return key (Note: the Return key # can be configured to send either LF (\015) or CR LF). In Application Mode, # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys # always send the same "Esc O {code}" sequences. It is assumed that the keypad # is normally in Numeric Mode. If an application requires that the keypad be # in Application Mode then it is expected that the user, or the application, # will set the TERM environment variable to point to a terminfo entry which has # defined the string to include the codes that switch the keypad into # Application Mode, and the terminfo entry will also define function key # fields to match the Application Mode control codes. If the string # is a null string or is not defined, then the keypad is assumed to be in # Numeric Mode. If the string switches the keypad into Application # Mode, it is expected that the string will contain the control codes # necessary to reset the keypad to "Normal" mode, and it is also expected that # applications which transmit the string will also always transmit the # string to the terminal before they exit. # # Here's a diagram of the VT100 keypad keys with their bindings. # The top line is the name of the key (some DEC keyboards have the keys # labelled somewhat differently, like GOLD instead of PF1, but this is # the most "official" name). The second line is the escape sequence it # generates in Application Keypad mode (where "$" means the ESC # character). The third line contains two items, first the mapping of # the key in terminfo, and then in termcap. # _______________________________________ # | PF1 | PF2 | PF3 | PF4 | # | $OP | $OQ | $OR | $OS | # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| # | 7 8 9 - | # | $Ow | $Ox | $Oy | $Om | # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| # | 4 | 5 | 6 | , | # | $Ot | $Ou | $Ov | $Ol | # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| # | 1 | 2 | 3 | | # | $Oq | $Or | $Os | enter | # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | # | 0 | . | | # | $Op | $On | | # |___kc1_______K4____|_kc3__K5_|_kent_@8_| # # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the # terminfo guidelines. That is a compromise used to assign the remaining # keys on the keypad to kf5-kf0, used on older systems with legacy termcap # support: vt100+keypad|dec vt100 numeric keypad no fkeys, ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, vt100+pfkeys|dec vt100 numeric keypad, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=vt100+keypad, vt100+fnkeys|dec vt100 numeric keypad, kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, use=vt100+pfkeys, # # A better adaptation to modern keyboards such as the PC's, which have a dozen # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to # use the 5-key arrangement to model the arrow keys as suggested in the # terminfo guidelines: # _______________________________________ # | PF1 | PF2 | PF3 | PF4 | # | $OP | $OQ | $OR | $OS | # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| # | 7 8 9 - | # | $Ow | $Ox | $Oy | $Om | # |_ka1__K1_|_________|_ka3__K3_|_________| # | 4 | 5 | 6 | , | # | $Ot | $Ou | $Ov | $Ol | # |_________|_kb2__K2_|_________|_________| # | 1 | 2 | 3 | | # | $Oq | $Or | $Os | enter | # |_kc1__K4_|_________|_kc3__K5_| $OM | # | 0 | . | | # | $Op | $On | | # |___________________|_________|_kent_@8_| # vt220+keypad|dec vt220 numeric keypad, ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, kb3=\EOv, kc2=\EOr, # vt100+enq|ncurses extension for vt100-style ENQ, u8=\E[?1;2c, use=ansi+enq, vt102+enq|ncurses extension for vt102-style ENQ, u8=\E[?6c, use=ansi+enq, # # And here, for those of you with orphaned VT100s lacking documentation, is # a description of the soft switches invoked when you do `Set Up'. # # Scroll 0-Jump Shifted 3 0-# # | 1-Smooth | 1-British pound sign # | Autorepeat 0-Off | Wrap Around 0-Off # | | 1-On | | 1-On # | | Screen 0-Dark Bkg | | New Line 0-Off # | | | 1-Light Bkg | | | 1-On # | | | Cursor 0-Underline | | | Interlace 0-Off # | | | | 1-Block | | | | 1-On # | | | | | | | | # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings # | | | | | | | | # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz # | | | 1-On | | | 1-50 Hz # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits # | | 1-ANSI | | 1-8 Bits # | Keyclick 0-Off | Parity 0-Off # | 1-On | 1-On # Margin Bell 0-Off Parity Sense 0-Odd # 1-On 1-Even # # The following SET-UP modes are assumed for normal operation: # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS # WRAP_AROUND_ON JUMP_SCROLL_OFF # Other SET-UP modes may be set for operator convenience or communication # requirements; I recommend # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# # Unless you have a graphics add-on such as Digital Engineering's VT640 # (and even then, whenever it can be arranged!) you should set # INTERLACE_OFF # # (vt100: I added / based on the init string, also . -- esr) vt100|vt100-am|dec vt100 (w/advanced video), OTbs, am, mc5i, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=vt100+fnkeys, vt100nam|vt100-nam|vt100 no automargins, am@, xenl@, use=vt100-am, vt100-vb|dec vt100 (w/advanced video) & no beep, bel@, flash=\E[?5h\E[?5l, use=vt100, # Ordinary vt100 in 132 column ("wide") mode. vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), cols#132, lines#14, vt@, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, # vt100 with no advanced video. vt100-nav|vt100 without advanced video option, xmc#1, blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, smul@, use=vt100, vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), cols#132, lines#14, use=vt100-nav, # vt100 with one of the 24 lines used as a status line. # We put the status line on the top. vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, eslok, hs, lines#23, clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, # Status line at bottom. # Clearing the screen will clobber status line. vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, eslok, hs, lines#23, dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, # Most of the `vt100' emulators out there actually emulate a vt102 # This entry (or vt102-nsgr) is probably the right thing to use for # these. vt102|dec vt102, dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100, vt102-w|dec vt102 in wide mode, cols#132, rs3=\E[?3h, use=vt102, # Many brain-dead PC comm programs that pretend to be `vt100-compatible' # fail to interpret the ^O and ^N escapes properly. Symptom: the # string in the canonical vt100 entry above leaves the screen littered # with little snowflake or star characters (IBM PC ROM character \017 = ^O) # after highlight turnoffs. This entry should fix that, and even leave # ACS support working, at the cost of making multiple-highlight changes # slightly more expensive. # From: Eric S. Raymond July 22 1995 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), sgr@, sgr0=\E[m, use=vt102, # VT125 Graphics CRT. Clear screen also erases graphics # Some vt125's came configured with vt102 support. vt125|vt125 graphics terminal, mir, clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, # This isn't a DEC entry, it came from University of Wisconsin. # (vt131: I added / based on the init string, also -- esr) vt131|dec vt131, OTbs, am, xenl, cols#80, it#8, lines#24, vt#3, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2/>, smul=\E[4m$<2/>, # vt132 - like vt100 but slower and has ins/del line and such. # I'm told that / are backwards in the terminal from the # manual and from the ANSI standard, this describes the actual # terminal. I've never actually used a vt132 myself, so this # is untested. # vt132|DEC vt132, xenl, dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, # This vt220 description maps F5--F9 to the second block of function keys # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. # PF1--PF4 are used as F1--F4. # vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, OTbs, OTpt, am, mir, xenl, xon, cols#80, lines#24, vt#3, OTnl=^J, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, # A much better description of the VT200/220; used to be vt220-8 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 # designation to accommodate bug in pcvt -TD vt220|vt200|dec vt220, OTbs, am, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vt220-w|vt200-w|DEC vt220 in wide mode, cols#132, rs3=\E[?3h, use=vt220, vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, OTbs, am, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, if=/usr/share/tabset/vt100, il=\233%p1%dL, il1=\233L, ind=\ED, is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l, sc=\E7, sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, smso=\2337m, smul=\2334m, tbc=\2333g, # vt220d: # This vt220 description regards F6--F10 as the second block of function keys # at the top of the keyboard. This mapping follows the description given # in the VT220 Programmer Reference Manual and agrees with the labeling # on some terminals that emulate the vt220. There is no support for an F5. # See vt220 for an alternate mapping. # vt220d|DEC VT220 in vt100 mode with DEC function key labeling, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, am@, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko # (not an official DEC entry!) # The problem with real vt220 terminals is they don't send escapes when in # in vt220 mode. This can be gotten around two ways. 1> don't send # escapes or 2> put the vt220 into vt100 mode and use all the nifty # features of vt100 advanced video which it then has. # # This entry takes the view of putting a vt220 into vt100 mode so # you can use the escape key in emacs and everything else which needs it. # # You probably don't want to use this on a VMS machine since VMS will think # it has a vt220 and will get fouled up coming out of emacs # # From: Alexander Latzko , 30 Dec 1996 # (Added vt100 , to quiet a tic warning -- esr) vt200-js|vt220-js|dec vt200 series with jump scroll, am, cols#80, bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, # This was DEC's vt320. Use the purpose-built one below instead #vt320|DEC VT320 in vt100 emulation mode, # use=vt220, # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. # vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, am@, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, # These entries are not DEC's official ones, they were purpose-built for the # VT320. Here are the designer's notes: # is end on a PC kbd. Actually 'select' on a VT. Mapped to # 'Erase to End of Field'... since nothing seems to use 'end' anyways... # khome is Home on a PC kbd. Actually 'FIND' on a VT. # Things that use usually use tab anyways... and things that don't use # tab usually use instead... # kprv is same as tab - Backtab is useless... # I left out because of its RIDICULOUS complexity, # and the resulting fact that it causes the termcap translation of the entry # to SMASH the 1k-barrier... # From: Adam Thompson Sept 10 1995 # (vt320: uncommented --esr) vt320|vt300|dec vt320 7 bit terminal, am, eslok, hs, mir, msgr, xenl, cols#80, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[H\E[K, use=vt220+keypad, vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, am@, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320, # We have to init 132-col mode, not 80-col mode. vt320-w|vt300-w|dec vt320 wide 7 bit terminal, cols#132, wsl#132, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320, vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, am@, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w, # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals # which are pretty much a superset of the VT320. They have the # host writable status line, yet another different DRCS matrix size, # and such, but they add the DEC Technical character set, Multiple text # pages, selectable length pages, and the like. The difference between # the vt330 and vt340 is that the latter has only 2 planes and a monochrome # monitor, the former has 4 planes and a color monitor. These terminals # support VT131 and ANSI block mode, but as with much of these things, # termcap/terminfo doesn't deal with these features. # # Note that this entry is are set up in what was the standard way for GNU # Emacs v18 terminal modes to deal with the cursor keys in that the arrow # keys were switched into application mode at the same time the numeric pad # is switched into application mode. This changes the definitions of the # arrow keys. Emacs v19 is smarter and mines its keys directly out of # your termcap or terminfo entry, # # From: Daniel Glasser , 13 Oct 1993 # (vt340: string capability "sb=\E[M" corrected to "sr"; # also, added / based on the init string -- esr) vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, # DEC doesn't supply a vt400 description, so we add Daniel Glasser's # (originally written with vt420 as its primary name, and usable for it). # # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple # text pages and long text pages with selectable length of the vt340, along # with left and right margins, rectangular area text copy, fill, and erase # operations, selected region character attribute change operations, # page memory and rectangle checksums, insert/delete column, reception # macros, and other features too numerous to remember right now. TERMCAP # can only take advantage of a few of these added features. # # Note that this entry is are set up in what was the standard way for GNU # Emacs v18 terminal modes to deal with the cursor keys in that the arrow # keys were switched into application mode at the same time the numeric pad # is switched into application mode. This changes the definitions of the # arrow keys. Emacs v19 is smarter and mines its keys directly out of # your termcap entry, # # From: Daniel Glasser , 13 Oct 1993 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; # also, added / based on the init string -- esr) vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, # (vt420: I removed , it collided with . I also restored # a missing -- esr) vt420|DEC VT420, am, mir, xenl, xon, cols#80, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) # takes two parameters, the key and the string. Translating the key is # straightforward (keys 1-5 are not defined on real terminals, though some # emulators define these): # # if (key < 16) then value = key; # else if (key < 21) then value = key + 1; # else if (key < 25) then value = key + 2; # else if (key < 27) then value = key + 3; # else if (key < 30) then value = key + 4; # else value = key + 5; # # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". # There's no provision in terminfo for emitting a string in this format, so the # application has to know it. # vt420pc|DEC VT420 w/PC keyboard, kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, pctrm=USR_TERM\:vt420pcdos\:, pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420, vt420pcdos|DEC VT420 w/PC for DOS Merge, lines#25, dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, pctrm@, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, use=vt420, vt510|DEC VT510, use=vt420, vt510pc|DEC VT510 w/PC keyboard, use=vt420pc, vt510pcdos|DEC VT510 w/PC for DOS Merge, use=vt420pcdos, # VT520/VT525 # # The VT520 is a monochrome text terminal capable of managing up to # four independent sessions in the terminal. It has multiple ANSI # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. # # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or # [Alt]/[Print Screen] depending upon which keyboard and which # terminal mode is being used. If Set-Up has been disabled or # assigned to an unknown key, Set-Up may be entered by pressing # [F3] as the first key after power up, regardless of keyboard type. # (vt520: I added / based on the init string, also -- esr) vt520|DEC VT520, am, mir, xenl, xon, cols#80, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, # (vt525: I added / based on the init string; # removed =\E[m, =\E[m, added -- esr) vt525|DEC VT525, am, mir, xenl, xon, cols#80, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, #### VT100 emulations # # John Hawkinson tells us that the EWAN telnet for Windows # (the best Windows telnet as of September 1995) presents the name `dec-vt100' # to telnetd. Michael Deutschmann informs us # that this works best with a stock vt100 entry. dec-vt100|EWAN telnet's vt100 emulation, use=vt100, # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 dec-vt220|DOS tnvt200 terminal emulator, am@, use=vt220, # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to # anyone who needs PC VT340 emulation. (or anything below that level, for # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's # RDBM systems, it includes ReGIS and SiXel support! I'm impressed... # I can send the address if requested. # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) # From: Adam Thompson Sept 10 1995 z340|zstem vt340 terminal emulator 132col 42line, lines#42, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w, z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), am@, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340, # CRT is shareware. It implements some xterm features, including mouse. crt|crt-vt220|CRT 2.3 emulating VT220, bce, msgr, ncv@, hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, # PuTTY 0.55 (released 3 August 2004) # http://www.chiark.greenend.org.uk/~sgtatham/putty/ # # Comparing with 0.51, vttest is much better (only a few problems with the # cursor position reports and wrapping). # # PuTTY 0.51 (released 14 December 2000) # # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as # well as SCO and Atari, color palettes from Linux console). Reading the code, # it is intended to be VT102 plus selected features. By default, it sets $TERM # to xterm, which is incorrect, since several features are misimplemented: # # Alt+key always sends ESC+key, so 'km' capability is removed. # # Control responses, wrapping and tabs are buggy, failing a couple of # screens in vttest. # # xterm mouse support is not implemented (unrelease version may). # # Several features such as backspace/delete are optional; this entry documents # the default behavior -TD putty|PuTTY terminal emulator, am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT, colors#8, it#8, ncv#22, pairs#64, U8#1, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq, vt100-putty|Reset PuTTY to pure vt100, rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, use=vt100, # palette is hardcoded... putty-256color|PuTTY 0.58 with xterm 256-colors, initc@, use=xterm+256color, use=putty, # One of the keyboard selections is "VT100+". # pterm (the X11 port) uses shifted F1-F10 as F11-F20 putty-vt100|VT100+ keyboard layout, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, use=putty, # Unlike xterm-sco, this leaves kmous ambiguous with kf1. # # Use modifiers to obtain function keys past 12: # F1-F12 - normal # F13-F24 - shift # F25-F36 - control/alt # F37-F48 - control/shift # putty-sco|putty with SCO function keys, kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty, # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator # (communication program) which supports: # # - Serial port connections. # - TCP/IP (telnet) connections. # - VT100 emulation, and selected VT200/300 emulation. # - TEK4010 emulation. # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and # Quick-VAN). # - Scripts using the "Tera Term Language". # - Japanese and Russian character sets. # # The program does not come with terminfo or termcap entries. However, the # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no # vt52 or doublesize character support; blinking is done with color). Besides # the HPA, VPA extensions it also implements CPL and CNL. # # All of the function keys can be remapped. This description shows the default # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad # is laid out like vt220, rather than the face codes on the PC keyboard, i.e, # kfnd Insert # kslt Delete # kich1 Home # kdch1 PageUp # kpp End # knp PageDown # # ANSI colors are implemented, but cannot be combined with video attributes # except for reverse. # # No fonts are supplied with the program, so the acsc string is chosen to # correspond with the default Microsoft terminal font. # # Tera Term recognizes some xterm sequences, including those for setting and # retrieving the window title, and for setting the window size (i.e., using # "resize -s"), though it does not pass SIGWINCH to the application if the # user resizes the window with the mouse. teraterm2.3|Tera Term Pro, km, xon@, ncv#43, vt@, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, use=klone+color, use=vt100, # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary # to choose a Windows OEM font). # # Testing with tack: # - it does not have xenl (suppress that) # - underline seems to work with color (modify ncv). # Testing with vttest: # - wrapping differs from vt100 (menu 1). # - it recognizes xterm's X10 and normal mouse tracking, but none of the # other flavors. # - it recognizes the dtterm window controls for reporting size in # characters and pixels. # - it passes SIGWINCH. teraterm4.59|Tera Term Pro, bce, xenl@, ncv#41, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, kmous=\E[M, use=teraterm2.3, teraterm|Tera Term, use=teraterm4.59, # Tested with WinNT 4.0, the telnet application assumes the screensize is # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. # # Other notes: # a) Fails tack's cup (cursor-addressing) test, though cup works well enough # for casual (occasional) use. Also fails several of the vttest screens, # but that is not unusual for vt100 "emulators". # b) Does not implement vt100 keypad # c) Recognizes a subset of vt52 controls. ms-vt100|MS telnet imitating dec vt100, lines#25, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, # Tested with Windows 2000, the telnet application runs in a console window, # also using 'Terminal' font. # # Other notes: # a) This version has no function keys or numeric keypad. Unlike the older # version, the numeric keypad is entirely ignored. # b) The program sets $TERM to "ansi", which of course is inaccurate. ms-vt100-color|vtnt|windows 2000 ansi (sic), bce, dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, use=ms-vt100, # Based on comments from Federico Bianchi: # # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different # scheme for PF keys. # # and PuTTY wishlist: # # The modifiers are represented as the codes listed above, prefixed to # the normal sequences. If the modifier is pressed alone, its sequence # is transmitted twice in succession. If multiple modifiers apply, # they're transmitted in the order shift, control, alt. # # Shift \E^S # Alt \E^A, # Ctrl \E^C, ms-vt100+|vt100+|windows XP vt100+ (sic), kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, knp=\E/, kpp=\E?, use=ms-vt100-color, ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, use=ms-vt100+, # expect-5.44.1.15/example/tkterm # a minimal subset of a vt100 (compare with "news-unk). # # The missing "=" in smkx is not a typo (here), but an error in tkterm. tt|tkterm|Don Libes' tk text widget terminal emulator, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, smso=\E[7m, ######## X TERMINAL EMULATORS #### XTERM # # You can add the following line to your .Xdefaults to change the terminal type # set by the xterms you start up to my-xterm: # # *termName: my-xterm # # System administrators can change the default entry for xterm instances # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either # case, xterm will detect and reject an invalid terminal type, falling back # to the default of xterm. # # X10/6.6 11/7/86, minus alternate screen, plus (csr) # (xterm: ":MT:" changed to ":km:"; added / based on init string; # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) # as these seem not to work -- esr) x10term|vs100-x10|xterm terminal emulator (X10 window system), OTbs, am, km, mir, msgr, xenl, xon, cols#80, it#8, lines#65, bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # Compatible with the R5 xterm # (from the XFree86 3.2 distribution, removed) # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD # corrected typos in rs2 string - TD # added u6-u9 -TD xterm-r5|xterm R5 version, OTbs, am, km, msgr, xenl, cols#80, it#8, lines#24, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, sc=\E7, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, # Compatible with the R6 xterm # (from XFree86 3.2 distribution, and added, removed) # added khome/kend, hts based on the R6 xterm code - TD # (khome/kend do not actually work in X11R5 or X11R6, but many people use this # for compatibility with other emulators). xterm-r6|xterm-old|xterm X11R6 version, OTbs, am, km, mir, msgr, xenl, cols#80, it#8, lines#24, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. # The name has been changed and some aliases have been removed. xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), OTbs, am, bce, km, mir, msgr, xenl, cols#80, it#8, lines#24, ncv@, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbeg=\EOE, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, use=ecma+color, use=vt220+keypad, # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 # codes for F1-F4 except while in VT220 mode. xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, # This version was released in XFree86 3.3.3 (November 1998). # Besides providing printer support, it exploits a new feature that allows # xterm to use terminfo-based descriptions with the titeInhibit resource. # -- the distribution contained incorrect khome/kend values -TD xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), mc5i, blink=\E[5m, ich1@, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, # This version was released in XFree86 4.0. xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), npc, kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, smcup=\E[?1049h, use=xterm-xf86-v333, # This version was released in XFree86 4.3. xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, kbeg@, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, use=xterm-xf86-v40, # This version was released in XFree86 4.4. xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v43, xterm-xfree86|xterm terminal emulator (XFree86), use=xterm-xf86-v44, # This version reflects the current xterm features. xterm-new|modern xterm terminal emulator, npc, indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM, rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux, use=xterm-basic, # This fragment is for people who cannot agree on what the backspace key # should send. xterm+kbs|fragment for backspace key, kbs=\177, # # This fragment describes as much of XFree86 xterm's "pc-style" function # keys as will fit into terminfo's 60 function keys. # From ctlseqs.ms: # Code Modifiers # --------------------------------- # 2 Shift # 3 Alt # 4 Shift + Alt # 5 Control # 6 Shift + Control # 7 Alt + Control # 8 Shift + Alt + Control # --------------------------------- # The meta key may also be used as a modifier in this scheme, adding another # bit to the parameter. xterm+pcfkeys|fragment for PC-style fkeys, use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, use=xterm+pce2, # xterm+noapp|fragment with cursor keys in normal mode, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, khome=\E[H, xterm+app|fragment with cursor keys in application mode, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, khome=\EOH, # # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) # and revised in patch #167 (2002/8/24). Some other terminal emulators copied # the earlier scheme, as noted in the "use=" clauses in this file. # # The original assignments from patch #94 for cursor-keys had some technical # issues: # # A parameter for a function-key to represent a modifier is just more # bits. But for a cursor-key it may change the behavior of the # application. For instance, emacs decodes the first parameter of a # cursor-key as a repeat count. # # A parameterized string should (really) not begin with SS3 (\EO). # Rather, CSI (\E[) should be used. # # For these reasons, the original assignments were deprecated. For # compatibility reasons, they are still available as a setting of xterm's # modifyCursorKeys resource. These fragments list the modified cursor-keys # that might apply to xterm+pcfkeys with different values of that resource. xterm+pcc3|fragment with modifyCursorKeys:3, kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, kUP7=\E[>1;7A, xterm+pcc2|fragment with modifyCursorKeys:2, kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, xterm+pcc1|fragment with modifyCursorKeys:1, kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, xterm+pcc0|fragment with modifyCursorKeys:0, kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, # # Here are corresponding fragments from xterm patch #216: # xterm+pcf0|fragment with modifyFunctionKeys:0, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, # xterm+pcf2|fragment with modifyFunctionKeys:2, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, # # Chunks from xterm #230: xterm+pce2|fragment with modifyCursorKeys:2, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+edit, xterm+edit|fragment for 6-key editing-keypad, kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, use=xterm+pc+edit, xterm+pc+edit|fragment for pc-style editing keypad, kend=\E[4~, khome=\E[1~, xterm+vt+edit|fragment for vt220-style editing keypad, kfnd=\E[1~, kslt=\E[4~, # # Those chunks use the new-style (the xterm oldFunctionKeys resource is false). # Alternatively, the same scheme with old-style function keys as in xterm-r6 # is shown here (because that is used in mrxvt and mlterm): xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, kf63=\E[13;4~, use=xterm+pcf2, # # This chunk is used for building the VT220/Sun/PC keyboard variants. xterm-basic|modern xterm terminal emulator - common, OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq, # From: David J. MacKenzie , 14 Nov 1997 # In retrospect, something like xterm-r6 was intended here -TD xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) # If configured to support 88- or 256-colors (which is fairly common in 2009), # xterm also recognizes the control sequences for initc -TD xterm-16color|xterm with 16 colors like aixterm, ccc, initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, use=ibm+16color, use=xterm-new, # 256-colors is a compile-time feature of XFree86 xterm beginning with # patch #111 (1999/7/10) -TD xterm+256color|xterm 256-color feature, ccc, colors#256, pairs#32767, initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, setb@, setf@, # 88-colors is a compile-time feature of XFree86 xterm beginning with # patch #115 (1999/9/18) -TD # # Note that the escape sequences used are the same as for 256-colors - xterm # has a different table of default color resource values. If built for # 256-colors, it can still handle an 88-color palette by using the initc # capability. # # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals # which support the xterm+256color feature support the associated initc # capability. So it is cancelled in the entries which use this and/or the # xterm+256color block. # # The default color palette for the 256- and 88-colors are different. A # given executable will have one palette (perhaps compiled-in). If the program # supports xterm's control sequence, it can be programmed using initc. xterm+88color|xterm 88-color feature, colors#88, pairs#7744, use=xterm+256color, # These variants of XFree86 3.9.16 xterm are built as a configure option. xterm-256color|xterm with 256 colors, use=xterm+256color, use=xterm-new, xterm-88color|xterm with 88 colors, use=xterm+88color, use=xterm-256color, # These two are used to demonstrate the any-event mouse support, i.e., by # using an extended name "XM" which tells ncurses to put the terminal into # a special mode when initializing the xterm mouse. xterm-1002|testing xterm-mouse, XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, xterm-1003|testing xterm-mouse, XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who # asked for some of xterm's advanced features to be added to its terminfo # entry. It defines extended capabilities not found in standard terminfo or # termcap. These are useful in tmux, for instance, hence the name. # # One caveat in adding extended capabilities in ncurses is that if the names # are longer than two characters, then they will not be visible through the # termcap interface. # # Ms modifies the selection/clipboard. Its parameters are # p1 = the storage unit (clipboard, selection or cut buffer) # p2 = the base64-encoded clipboard content. # # Ss is used to set the cursor style as described by the DECSCUSR # function to a block or underline. # Se resets the cursor style to the terminal power-on default. # # Cs and Ce set and reset the cursor colour. xterm+tmux|advanced xterm features used in tmux, Cr=\E]112\007, Cs=\E]12;%p1%s\007, Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, # This is another variant, for XFree86 4.0 xterm (T.Dickey) # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. # To use it, your decTerminalID resource must be set to 200 or above. # # HTS \E H \210 # RI \E M \215 # SS3 \E O \217 # CSI \E [ \233 # xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, civis=\233?25l, clear=\233H\2332J, cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, flash=\233?5h$<100/>\233?5l, home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\Ec, rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, use=xterm+kbs, xterm-hp|xterm with hpterm function keys, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET, use=xterm-basic, xterm-sco|xterm with SCO function keys, kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, use=xterm-basic, # The xterm-new description has all of the features, but is not completely # compatible with vt220. If you are using a Sun or PC keyboard, set the # sunKeyboard resource to true: # + maps the editing keypad # + interprets control-function-key as a second array of keys, so a # 12-fkey keyboard can support vt220's 20-fkeys. # + maps numeric keypad "+" to ",". # + uses DEC-style control sequences for the application keypad. # xterm-vt220|xterm emulating vt220, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, use=xterm+app, use=xterm+edit, use=xterm-basic, use=vt220+keypad, xterm-vt52|xterm emulating dec vt52, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, use=xterm+kbs, xterm-noapp|xterm with cursor keys in normal mode, rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, use=xterm, xterm-24|vs100|xterms|xterm terminal emulator (X Window System), lines#24, use=xterm-old, # This is xterm for ncurses. xterm|xterm terminal emulator (X Window System), use=xterm-new, # This entry assumes that xterm's handling of VT100 SI/SO is disabled by # setting the vt100Graphics resource to false. xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, U8#1, use=xterm, # These entries allow access to the X titlebar and icon name as a status line. # Note that twm (and possibly window managers descended from it such as tvtwm, # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess # with it. xterm+sl|access X title line and icon name, hs, wsl#40, dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, xterm+sl-twm|access X title line (pacify twm-descended window managers), hs, wsl#40, dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, # # The following xterm variants don't depend on your base version # # xterm with bold instead of underline xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, smso=\E[7m, smul=\E[1m, use=xterm-old, # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, ich@, ich1@, use=xterm, # From: Mark Sheppard , 4 May 1996 xterm1|xterm terminal emulator ignoring the alternate screen buffer, rmcup@, smcup@, use=xterm, #### KTERM # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) # (kterm should not invoke DEC Graphics as the alternate character set # -- Kenji Rikitake) # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics # -- MATSUMOTO Shoji) # kterm implements acsc via built-in table of X Drawable's kterm|kterm kanji terminal emulator (X window system), eslok, hs, XT, ncv@, acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, kterm-color|kterm-co|kterm with ANSI colors, ncv@, use=kterm, use=ecma+color, #### Other XTERM # These (xtermc and xtermm) are distributed with Solaris. They refer to a # variant of xterm which is apparently no longer supported, but are interesting # because they illustrate SVr4 curses mouse controls - T.Dickey xtermm|xterm terminal emulator (monocrome), OTbs, am, km, mir, msgr, xenl, btns#3, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, xtermc|xterm terminal emulator (color), colors#8, ncv#7, pairs#64, op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, use=xtermm, # From: David J. MacKenzie 20 Apr 1995 # Here's a termcap entry I've been using for xterm_color, which comes # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the # color stuff, I also have a status line defined as the window manager # title bar. [I have translated it to terminfo -- ESR] xterm-pcolor|xterm with color used for highlights and status line, bold=\E[1;43m, rev=\E[7;34m, sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m, smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6, # This describes the capabilities of color_xterm, an xterm variant from # before ECMA-64 color support was folded into the main-line xterm release. # This entry is straight from color_xterm's maintainer. # From: Jacob Mandelson , 09 Nov 1996 # The README's with the distribution also say that it supports SGR 21, 24, 25 # and 27, but they are not present in the terminfo or termcap. color_xterm|cx|cx100|color_xterm color terminal emulator for X, OTbs, am, km, mir, msgr, xenl, XT, cols#80, it#8, lines#65, ncv@, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, smul=\E[4m, use=ecma+color, use=vt220+keypad, # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except # that each of those implements the home, end, delete keys differently. # # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce # colors; note that this is not compatible with the 5.2 version. # csw (2002-05-15): make xterm-color primary instead of nxterm, to # match XFree86's xterm.terminfo usage and prevent circular links xterm-color|nxterm|generic color xterm, ncv@, op=\E[m, use=xterm-r6, use=klone+color, # This entry describes an xterm with Sun-style function keys enabled # via the X resource setting "xterm*sunFunctionKeys:true" # To understand / note that L1,L2 and F11,F12 are the same. # The ... keys are L3-L10. We don't set # because we want it to be seen as . # The ... keys are R1-R15. We treat some of these in accordance # with their Sun keyboard labels instead. # From: Simon J. Gerraty 10 Jan 1996 xterm-sun|xterm with sunFunctionKeys true, kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, use=xterm-basic, xterms-sun|small (80x24) xterm with sunFunctionKeys true, cols#80, lines#24, use=xterm-sun, #### GNOME (VTE) # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 gnome-rh62|Gnome terminal, bce, kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-color, # GNOME Terminal 1.4.0.4 (Redhat 7.2) # # This implements a subset of vt102 with a random selection of features from # other terminals such as color and function-keys. # # shift-f1 to shift-f10 are f11 to f20 # # NumLock changes the application keypad to approximate vt100 keypad, except # that there is no escape sequence matching comma (,). # # Other defects observed: # vt100 LNM mode is not implemented. # vt100 80/132 column mode is not implemented. # vt100 DECALN is not implemented. # vt100 DECSCNM mode is not implemented, so flash does not work. # vt100 TBC (tab reset) is not implemented. # xterm alternate screen controls do not restore cursor position properly # it hangs in tack after running function-keys test. gnome-rh72|GNOME Terminal, bce, km@, civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, # GNOME Terminal 2.0.1 (Redhat 8.0) # # Documentation now claims it implements vt220 (which is demonstrably false). # However, it does implement ECH, which is a vt220 feature. And there are # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display # more of its bugs using vttest. # # However, note that bce and msgr are broken in this release. Tabs (tbc and # hts) are broken as well. Sometimes flash (as in xterm-new) works. # # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu # operations. Shift-tab generates a distinct sequence so it can be argued # that it implements kcbt. gnome-rh80|GNOME Terminal, bce@, msgr@, ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, # GNOME Terminal 2.2.1 (Redhat 9.0) # # bce and msgr are repaired. gnome-rh90|GNOME Terminal, bce, msgr, hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, use=gnome-rh80, # GNOME Terminal 2.14.2 (Fedora Core 5) # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. gnome-fc5|GNOME Terminal, rs1=\Ec, rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, # GNOME Terminal 2.18.1 (2007 snapshot) # # For any "recent" version of gnome-terminal, it is futile to attempt to # support modifiers on cursor- and keypad keys because the program usually # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset # of the keys (which more/less correspond to the termcap values), and will # interpret those according to the $TERM value, but others not in the # terminfo according to some constantly changing set of hacker guidelines -TD vte-2007|VTE in GNOME Terminal snapshot 2.18.1, use=xterm+pcc2, use=gnome-fc5, gnome-2007|GNOME Terminal snapshot 2.18.1, use=vte-2007, # GNOME Terminal 2.22.3 (2008 snapshot) # # In vttest, it claims to be a vt220 with national replacement character-sets, # but aside from the identifier string, implements only a small fraction of # vt220's behavior, which will make it less usable on a VMS system (unclear # what the intent of the developer is, since the NRC feature exposed in vttest # by this change does not work). vte-2008|VTE in GNOME Terminal snapshot 2.22.3, use=vte+pcfkeys, use=vte-2007, gnome-2008|GNOME Terminal snapshot 2.22.3, use=vte-2008, # GNOME terminal may automatically use the contents of the "xterm" terminfo to # supply key information which is not built into the program. With 2.22.3, # this list is built into the program (which addresses the inadvertant use of # random terminfo data, though using a set of values which does not correspond # to any that xterm produces - still not solving the problem that GNOME # terminal hardcodes the $TERM variable as "xterm"). # # terminfo modifier code keys # kf13-kf24 shift 2 F1 to F12 # kf25-kf36 control 5 F1 to F12 # kf37-kf48 shift/control 6 F1 to F12 # kf49-kf60 alt 3 F1 to F12 # kf61-kf63 shift-alt 4 F1 to F3 # # The parameters with \EO (SS3) are technically an error, since SS3 should have # no parameters. This appears to be rote copying based on xterm+pcc0. vte+pcfkeys|VTE's variation on xterm+pcfkeys, kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q, kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P, kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S, kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, use=xterm+pcfkeys, gnome+pcfkeys|VTE's variation on xterm+pcfkeys, use=vte+pcfkeys, vte|VTE aka GNOME Terminal, use=vte-2008, gnome|GNOME Terminal, use=vte, # palette is hardcoded... vte-256color|VTE with xterm 256-colors, initc@, use=xterm+256color, use=vte, gnome-256color|GNOME Terminal with xterm 256-colors, use=vte-256color, # XFCE Terminal 0.2.5.4beta2 # # This is based on some of the same source code, e.g., the VTE library, as # gnome-terminal, but has fewer features, fails more screens in vttest. # Since most of the terminfo-related behavior is due to the VTE library, # the terminfo is the same as gnome-terminal. xfce|Xfce Terminal, use=vte, #### Other GNOME # Multi-Gnome-Terminal 1.6.2 # # This does not use VTE, and does have different behavior (compare xfce and # gnome). mgt|Multi GNOME Terminal, indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, #### KDE # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce # or not is debatable). kvt|KDE terminal, bce, km@, kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, # Konsole 1.0.1 # (formerly known as kvt) # # This program hardcodes $TERM to 'xterm', which is not accurate. However, to # simplify this entry (and point out why konsole isn't xterm), we base this on # xterm-r6. The default keyboard appears to be 'linux'. # # Notes: # a) konsole implements several features from XFree86 xterm, though none of # that is documented - except of course in its source code - apparently # because its implementors are unaccustomed to reading documentation - as # evidenced by the sparse and poorly edited documentation distributed with # konsole. Some features such as the 1049 private mode are recognized but # incorrectly implemented as a duplicate of the 47 private mode. # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad # sends PC-style escapes rather than vt100. # c) fails vttest menu 3 (Test of character sets) because it does not properly # parse some control sequences. Also fails vttest Primary Device Attributes # by sending a bogus code (in the source it says it's supposed to be a # vt220, which is doubly incorrect because it does not implement vt220 # control sequences except for a few special cases). Treat it as a # mildly-broken vt102. # # Update for konsole 1.3.2: # The 1049 private mode works (but see the other xterm screens in vttest). # Primary Device Attributes now returns the code for a vt100 with advanced # video option. Perhaps that's intended to be a "mildly-broken vt102". # # Updated for konsole 1.6.4: # add konsole-solaris # # Updated for konsole 1.6.6: # add control-key modifiers for function-keys, etc. # # vttest menu 1 shows that both konsole and gnome terminal do wrapping # different from xterm (and vt100's). They have the same behavior in this # detail, but it is unclear which copies the other. konsole-base|KDE console window, bce, km@, npc, XT, ncv@, bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, use=ecma+color, use=xterm-r6, konsole-linux|KDE console window with linux keyboard, kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=konsole-base, konsole-solaris|KDE console window with Solaris keyboard, kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather # than testing the code. konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, kend=\E[4~, khome=\E[1~, use=konsole-vt100, # The value for kbs reflects local customization rather than the settings used # for XFree86 xterm. konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, kend=\EOF, khome=\EOH, use=konsole+pcfkeys, use=konsole-vt100, # Konsole does not implement shifted cursor-keys. konsole+pcfkeys|konsole subset of xterm+pcfkeys, kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2, use=xterm+pcf0, # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but # it is still useful for deriving the other entries. konsole-vt100|KDE console window with vt100 (sic) keyboard, kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, use=konsole-base, konsole-vt420pc|KDE console window with vt420 pc keyboard, kbs=^H, kdch1=\177, use=konsole-vt100, konsole-16color|klone of xterm-16color, ncv#32, use=ibm+16color, use=konsole, # make a default entry for konsole konsole|KDE console window, use=konsole-xf4x, # palette is hardcoded... konsole-256color|KDE console window with xterm 256-colors, initc@, use=xterm+256color, use=konsole, #### MLTERM # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD # # It is nominally a vt102 emulator, with features borrowed from rxvt and # xterm. # # The function keys are numbered based on shift/control/alt modifiers, except # that the control-modifier itself is used to spawn a new copy of mlterm (the # "-P" option). So control/F1 to control/F12 may not be usable, depending on # how it is configured. # # kf1 to kf12 \E[11~ to \E[24~ # shift kf1 to kf12 \E[11;2~ to \E[24;2~ # alt kf1 to kf12 \E[11;3~ to \E[24;3~ # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ # mlterm|multi lingual terminal emulator, am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2, # The insert/delete/home/end keys do not respond to modifiers because mlterm # looks in its termcap to decide which string to send. If it used terminfo # (when available), it could use the extended names introduced for xterm. mlterm+pcfkeys|fragment for PC-style fkeys, kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, mlterm-256color|mlterm 3.0 with xterm 256-colors, use=xterm+256color, use=rxvt, #### RXVT # From: Thomas Dickey 04 Oct 1997 # Updated: Oezguer Kesim 02 Nov 1997 # Notes: # rxvt 2.21b uses # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, # but some applications don't work with that. # It also has an AIX extension # box2=lqkxjmwuvtn, # and # ech=\E[%p1%dX, # but the latter does not work correctly. # # The distributed terminfo says it implements hpa and vpa, but they are not # implemented correctly, using relative rather than absolute positioning. # # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. # Since rxvt is not really compatible with xterm, it should be configured as # "rxvt" or "rxvt-color". # # removed dch/dch1 because they are inconsistent with bce/ech -TD # remove km as per tack test -TD rxvt-basic|rxvt terminal base (X Window System), OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l, is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=rxvt+pcfkeys, use=vt220+keypad, # Key Codes from rxvt reference: # # Note: Shift + F1-F10 generates F11-F20 # # For the keypad, use Shift to temporarily override Application-Keypad # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock # is off, escape sequences toggle Application-Keypad setting. # Also note that values of Home, End, Delete may have been compiled # differently on your system. # # Normal Shift Control Ctrl+Shift # Tab ^I ESC [ Z ^I ESC [ Z # BackSpace ^H ^? ^? ^? # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ # # Application # Up ESC [ A ESC [ a ESC O a ESC O A # Down ESC [ B ESC [ b ESC O b ESC O B # Right ESC [ C ESC [ c ESC O c ESC O C # Left ESC [ D ESC [ d ESC O d ESC O D # KP_Enter ^M ESC O M # KP_F1 ESC O P ESC O P # KP_F2 ESC O Q ESC O Q # KP_F3 ESC O R ESC O R # KP_F4 ESC O S ESC O S # XK_KP_Multiply * ESC O j # XK_KP_Add + ESC O k # XK_KP_Separator , ESC O l # XK_KP_Subtract - ESC O m # XK_KP_Decimal . ESC O n # XK_KP_Divide / ESC O o # XK_KP_0 0 ESC O p # XK_KP_1 1 ESC O q # XK_KP_2 2 ESC O r # XK_KP_3 3 ESC O s # XK_KP_4 4 ESC O t # XK_KP_5 5 ESC O u # XK_KP_6 6 ESC O v # XK_KP_7 7 ESC O w # XK_KP_8 8 ESC O x # XK_KP_9 9 ESC O y # # The source-code for rxvt actually defines mappings for F21-F35, using # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys # are rare, so this entry uses the shift- and control-modifiers as in # xterm+pcfkeys to define keys past F12. # # kIC is normally not used, since rxvt performs a paste for that (shifted # insert), unless private mode 35 is set. # # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD rxvt+pcfkeys|fragment for PC-style fkeys, kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa, rxvt|rxvt terminal emulator (X Window System), ncv@, hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, rxvt-color|rxvt terminal emulator (X Window System), use=rxvt, rxvt-256color|rxvt 2.7.9 with xterm 256-colors, use=xterm+256color, use=rxvt, rxvt-88color|rxvt 2.7.9 with xterm 88-colors, use=xterm+88color, use=rxvt, rxvt-xpm|rxvt terminal emulator (X Window System), use=rxvt, rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, use=rxvt, rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, use=rxvt-cygwin, # This variant is supposed to work with rxvt 2.7.7 when compiled with # NO_BRIGHTCOLOR defined. rxvt needs more work... rxvt-16color|xterm with 16 colors like aixterm, ncv#32, use=ibm+16color, use=rxvt, # From: Thomas Dickey 04 Oct 1997 # Updated: Oezguer Kesim 02 Nov 1997 # Updated: Marc Lehmann , 17 Feb 2005 # Updated: Marc Lehmann , 04 Nov 2008: change init/reset sequences rxvt-unicode|rxvt-unicode terminal (X Window System), bw, am, bce, ccc, xenl, eo, km, hs, mir, msgr, npc, mc5i, xon, btns#5, cols#80, it#8, lines#24, lm#0, colors#88, pairs#7744, ncv#0, acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, tbc=\E[3g, clear=\E[H\E[2J, el1=\E[1K, el=\E[K, ed=\E[J, hpa=\E[%i%p1%dG, cup=\E[%i%p1%d;%p2%dH, cud1=^J, home=\E[H, civis=\E[?25l, cub1=^H, cnorm=\E[?25h, cuf1=\E[C, cuu1=\E[A, cvvis=\E[?25h, dch1=\E[P, dl1=\E[M, dsl=\E]2;\007, enacs=, smacs=\E(0, smam=\E[?7h, blink=\E[5m, bold=\E[1m, smcup=\E[?1049h, smir=\E[4h, sitm=\E[3m, rev=\E[7m, smso=\E[7m, smul=\E[4m, ech=\E[%p1%dX, rmacs=\E(B, rmam=\E[?7l, sgr0=\E[m\E(B, rmcup=\E[r\E[?1049l, rmir=\E[4l, ritm=\E[23m, rmso=\E[27m, rmul=\E[24m, flash=\E[?5h$<20/>\E[?5l, fsl=^G, is1=\E[!p, is2=\E[r\E[m\E[2J\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l, initc=\E]4;%p1%d;rgb\:%p2%{65535}%*%{1000}%/%4.4X/%p3%{65535}%*%{1000}%/%4.4X/%p4%{65535}%*%{1000}%/%4.4X\E\\, ich1=\E[@, il1=\E[L, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kcbt=\E[Z, kc1=\EOq, kc3=\EOs, kdch1=\E[3~, kcud1=\E[B, kend=\E[8~, kent=\EOM, kel=\E[8\^, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kcub1=\E[D, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kcuf1=\E[C, kDC=\E[3$, kslt=\E[4~, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcuu1=\E[A, rmkx=\E>, smkx=\E=, op=\E[39;49m, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, ich=\E[%p1%d@, indn=\E[%p1%dS, il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, rin=\E[%p1%dT, cuu=\E[%p1%dA, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rs1=\Ec, rs2=\E[r\E[m\E[?7;25h\E[?1;3;4;5;6;9;66;1000;1001;1049l\E[4l, rc=\E8, vpa=\E[%i%p1%dd, sc=\E7, ind=^J, ri=\EM, s0ds=\E(B, s1ds=\E(0, s2ds=\E*B, s3ds=\E+B, setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, setb=%?%p1%{7}%>%t\E[48;5;%p1%dm%e\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;, setf=%?%p1%{7}%>%t\E[38;5;%p1%dm%e\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m%;, hts=\EH, ht=^I, tsl=\E]2;, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, rxvt-unicode-256color|rxvt-unicode terminal with 256 colors (X Window System), colors#256, pairs#32767, use=rxvt-unicode, #### MRXVT # mrxvt 0.5.4 # # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which # makes its function-keys different from other flavors of rxvt -TD mrxvt|multitabbed rxvt, XT, kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, use=rxvt, mrxvt-256color|multitabbed rxvt with 256 colors, use=xterm+256color, use=mrxvt, #### ETERM # From: Michael Jennings # # Eterm 0.9.3 # # removed kf0 which conflicts with kf10 -TD # remove cvvis which conflicts with cnorm -TD # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT # but does otherwise follow the rxvt+pcfkeys model -TD # remove nonworking flash -TD # remove km as per tack test -TD Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, btns#5, cols#80, it#8, lines#24, lm#0, ncv@, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E>\E[?1l, is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, rmso=\E[27m, rmul=\E[24m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, use=ecma+color, Eterm-256color|Eterm with xterm 256-colors, use=xterm+256color, use=Eterm, Eterm-88color|Eterm with 88 colors, use=xterm+88color, use=Eterm, #### ATERM # Based on rxvt 2.4.8, it has a few differences in key bindings aterm|AfterStep terminal, XT, kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, #### XITERM # xiterm 0.5-5.2 # This is not based on xterm's source... # vttest shows several problems with keyboard, cursor-movements. # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm xiterm|internationalized terminal emulator for X, km@, kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, #### HPTERM # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in # from BSD termcap. (hpterm: added empty , we have no idea what ACS # chars look like --esr) hpterm|X-hpterm|hp X11 terminal emulator, am, da, db, mir, xhp, cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # HPUX 11 provides a color version. hpterm-color|HP X11 terminal emulator with color, ccc, colors#64, pairs#8, home=\E&a0y0C, initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, #### EMU # This is for the extensible terminal emulator on the X11R6 contrib tape. # It corresponds to emu's internal emulation: # emu -term emu # emu's default sets TERM to "xterm", but that doesn't work well -TD # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD # fixes: add civis, cnorm, sgr -TD emu|emu native mode, am, bce, mir, msgr, xon, colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, setaf=\Er%i%p1%d;, sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, # vt220 Terminfo entry for the Emu emulation, corresponds to # emu -term vt220 # with NumLock set (to make the keypad transmit kf0-kf9). # fixes: add am, xenl, corrected sgr0 -TD emu-220|Emu-220 (vt200-7bit mode), am, xenl, xon, cols#80, it#8, lines#24, vt#200, acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, #### MVTERM # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings # indicate that it emulates more than one terminal, but incompletely. # # This is adapted from a FreeBSD bug-report by Daniel Rudy # It is based on vt102's entry, with some subtle differences, but also # has status line # supports ANSI colors (except for 'op' string) # apparently implements alternate screen like xterm # does not use padding, of course. mvterm|vv100|SwitchTerm aka mvTERM, am, eslok, hs, km, mir, msgr, xenl, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, #### MTERM # # This application is available by email from . # # "mterm -type ansi" sets $TERM to "ansi" mterm-ansi|ANSI emulation, am, bw, mir, msgr, it#8, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, # mterm normally sets $TERM to "mterm" mterm|mouse-sun|Der Mouse term, am, bw, mir, it#8, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, rmir=^O, rmso=^T, smir=^Q, smso=^V, # "mterm -type decansi" sets $TERM to "decansi" # # note: kdch1, kfnd, kslt are in the source code, but do not work -TD decansi|ANSI emulation with DEC compatibility hacks, am, mir, msgr, xenl, colors#8, it#8, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, vpa=\E[%i%p1%dd, #### VWM # # vwmterm is a terminal emulator written for the VWM console window manager # vwmterm|(vwm term), am, bce, ccc, mir, msgr, npc, xenl, xon, colors#8, pairs#64, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smcup=\E[?1049h, smso=\E[3m, smul=\E[4m, #### MGR # # MGR is a Bell Labs window system lighter-weight than X. # These entries describe MGR's xterm-equivalent. # They are courtesy of Vincent Broman 14 Jan 1997 # mgr|Bellcore MGR (non X) window system terminal emulation, am, km, bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, smul=\E4n, mgr-sun|Mgr window with Sun keyboard, ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, mgr-linux|Mgr window with Linux keyboard, ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, #### SIMPLETERM # st.suckless.org # st-0.1.1 # # Note: the original terminfo description uses leading blank to persuade # ncurses to use "st" as its name. Proper fix for that is to use "st" as an # alias. # # Reading the code shows it should work for aixterm 16-colors # - added st-16color # # Using tack: # - set eo (erase-overstrike) # - set xenl # - tbc doesn't work # - hts works # - cbt doesn't work # - shifted cursor-keys send sequences like rxvt # - sgr referred to unimplemented "invis" mode. # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis simpleterm|st| simpleterm, am, eo, mir, msgr, ul, xenl, colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, st-16color|simpleterm with 16-colors, use=ibm+16color, use=simpleterm, # 256 colors "works", but when running xterm's test-scripts, some garbage is # shown in the titlebar. st-256color|simpleterm with 256 colors, ccc@, initc@, use=xterm+256color, use=simpleterm, ### TERMINATOR # http://software.jessies.org/terminator/ # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit # Debian/current -TD (2011/8/20) # # There are some packaging problems: # a) using Java, the program starts off using 50Mb, and climbs from there, # up to 114Mb after testing (no scrollback). # b) it insists on reinstalling its terminal description in $HOME/.terminfo # (two copies, just in case the host happens to be Mac OS X). # I deleted this after testing with tack. # # Issues/features found with tack: # a) tbc does not work (implying that hts also is broken). # Comparing with the tabs utility shows a problem with the last tabstop on # a line. # b) has xterm-style shifted function-key strings # meta also is used, but control is ignored. # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta) # d) some combinations of shift/control send xterm-style sequences for # insert/delete/home/end. # e) numeric keypad sends only numbers (compare with vttest). # f) meta mode (km) is not implemented. # # Issues found with ncurses test-program: # a) bce is inconsistently implemented # b) widths of Unicode values above 256 do not always agree with wcwidth. # # Checked with vttest, found low degree of compatibility there. # # Checked with xterm's scripts, found that the 256-color palette is fixed. # # Fixes: # a) add sgr string # b) corrected sgr0 to reset alternate character set # c) modified smacs/rmacs to use SCS rather than SI/SO # d) removed bce # e) removed km terminator|Terminator no line wrap, eo, mir, msgr, xenl, xon, colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l, is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, vpa=\E[%i%p1%dd, ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS # # Columbus UNIX virtual terminal. This terminal also appears in # UNIX 4.0 and successors as line discipline 1 (?), but is # undocumented and does not really work quite right. cbunix|cb unix virtual terminal, OTbs, am, da, db, cols#80, lines#24, lm#0, bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, smso=\Ea^D, smul=\Ea^A, # (vremote: removed obsolete ":nl@:" -- esr) vremote|virtual remote terminal, am@, cols#79, use=cbunix, pty|4bsd pseudo teletype, cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, smso=\Ea$, smul=\Ea!, use=cbunix, # The codes supported by the term.el terminal emulation in GNU Emacs 19.30 eterm|gnu emacs term.el terminal emulation, am, mir, xenl, cols#80, lines#24, bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, smul=\E[4m, # The codes supported by the term.el terminal emulation in GNU Emacs 22.2 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, am, mir, msgr, xenl, colors#8, cols#80, lines#24, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, # Entries for use by the `screen' program by Juergen Weigert, # Michael Schroeder, Oliver Laumann. The screen and # screen-w entries came with version 3.7.1. The screen2 and screen3 entries # come from University of Wisconsin and may be older. # (screen: added on ANSI model -- esr) # # 'screen' defines extensions to termcap. Some are used in its terminal # description: # G0 (bool) Terminal can deal with ISO 2022 font selection sequences. # AX (bool) Does understand ANSI set default fg/bg color # (\E[39m / \E[49m). # S0 (str) Switch charset 'G0' to the specified charset. # E0 (str) Switch charset 'G0' back to standard charset. # # tested with screen 3.09.08 screen|VT 100/ANSI X3.64 virtual terminal, OTbs, OTpt, am, km, mir, msgr, xenl, G0, colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1, acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, S0=\E(%p1%c, use=ecma+color, # The bce and status-line entries are from screen 3.9.13 (and require some # changes to .screenrc). screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, bce, ech@, use=screen, screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, # ====================================================================== # Entries for GNU Screen with 16 colors. # Those variations permit to benefit from 16 colors palette, and from # bold font and blink attribute separated from bright colors. But they # are less portable than the generic "screen" 8 color entries: Their # usage makes real sense only if the terminals you attach and reattach # do all support 16 color palette. screen-16color|GNU Screen with 16 colors, use=ibm+16color, use=screen, screen-16color-s|GNU Screen with 16 colors and status line, use=ibm+16color, use=screen-s, screen-16color-bce|GNU Screen with 16 colors and BCE, use=ibm+16color, use=screen-bce, screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line, bce, use=ibm+16color, use=screen-s, # ====================================================================== # Entries for GNU Screen 4.02 with --enable-colors256. screen-256color|GNU Screen with 256 colors, ccc@, initc@, use=xterm+256color, use=screen, screen-256color-s|GNU Screen with 256 colors and status line, ccc@, initc@, use=xterm+256color, use=screen-s, screen-256color-bce|GNU Screen with 256 colors and BCE, ccc@, initc@, use=xterm+256color, use=screen-bce, screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line, bce, ccc@, initc@, use=xterm+256color, use=screen-s, # ====================================================================== # Read the fine manpage: # When screen tries to figure out a terminal name for # itself, it first looks for an entry named "screen.", # where is the contents of your $TERM variable. If # no such entry exists, screen tries "screen" (or "screen-w" # if the terminal is wide (132 cols or more)). If even this # entry cannot be found, "vt100" is used as a substitute. # # Notwithstanding the manpage, screen uses its own notion of the termcap # and some keys from "screen." are ignored. Here is an entry which # covers those (tested with screen 4.00.02) -TD screen+fkeys|function-keys according to screen, kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, khome=\E[1~, kslt@, # # Here are a few customized entries which are useful -TD # # Notes: # (a) screen does not support invis. # (b) screen's implementation of bw is incorrect according to tack. # (c) screen appears to hardcode the strings for khome/kend, making it # necessary to override the "use=" clause's values (screen+fkeys). # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, # which is NOT the same as the terminfo screen.. # (e) when screen finds one of these customized entries, it sets $TERM to # match. Hence, no "screen.xterm" entry is provided, since that would # create heartburn for people running remote xterm's. # # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV # since the default translations override the built-in keycode # translation. They are suppressed here to show what is tested by tack. screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, bce@, bw, invis@, kIC@, kNXT@, kPRV@, meml@, memu@, sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, use=screen+fkeys, use=xterm-new, # xterm-r6 does not really support khome/kend unless it is propped up by # the translations resource. screen.xterm-r6|screen customized for X11R6 xterm, bw, use=screen+fkeys, use=xterm-r6, # Color applications running in screen and TeraTerm do not play well together # on Solaris because Sun's curses implementation gets confused. screen.teraterm|disable ncv in teraterm, ncv#127, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, use=screen+fkeys, use=screen, # Other terminals screen.rxvt|screen in rxvt, bw, XT, cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, use=rxvt+pcfkeys, use=vt220+keypad, use=screen, screen.Eterm|screen in Eterm, use=screen+fkeys, use=Eterm, screen.mrxvt|screen in mrxvt, use=screen+fkeys, use=mrxvt, screen.vte|screen in any VTE-based terminal, use=screen+fkeys, use=vte, screen.gnome|screen in GNOME Terminal, use=screen+fkeys, use=gnome, screen.konsole|screen in KDE console window, use=screen+fkeys, use=konsole, # fix the backspace key screen.linux|screen in linux console, bw, kbs=\177, kcbt@, use=screen+fkeys, use=screen, screen.mlterm|screen in mlterm, use=screen+fkeys, use=mlterm, # The default "screen" entry is reasonably portable, but not optimal for the # most widely-used terminal emulators. The "bce" capability is supported in # screen since 3.9.13, and when used, will require fewer characters to be sent # to the terminal for updates. # # If you are using only terminals which support bce, then you can use this # feature in your screen configuration. # # Adding these lines to your ".screenrc" file will allow using these customized # entries: # term screen-bce # bce on # defbce on screen-bce.xterm-new|screen optimized for modern xterm, bce, ech@, use=screen.xterm-new, screen-bce.rxvt|screen optimized for rxvt, bce, ech@, use=screen.rxvt, screen-bce.Eterm|screen optimized for Eterm, bce, ech@, use=screen.Eterm, screen-bce.mrxvt|screen optimized for mrxvt, bce, ech@, use=screen.mrxvt, screen-bce.gnome|screen optimized for GNOME-Terminal, bce, ech@, use=screen.gnome, screen-bce.konsole|screen optimized for KDE console window, bce, ech@, use=screen.konsole, screen-bce.linux|screen optimized for linux console, bce, ech@, use=screen.linux, screen-bce.mlterm|screen optimized for mlterm, bce, ech@, use=screen.mlterm, screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, cols#132, use=screen, screen2|old VT 100/ANSI X3.64 virtual terminal, cols#80, it#8, lines#24, cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, smso=\E[3m, smul=\E[4m, tbc=\E[3g, # (screen3: removed unknown ":xv:LP:G0:" -- esr) screen3|older VT 100/ANSI X3.64 virtual terminal, km, mir, msgr, cols#80, it#8, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, # Francesco Potorti : # NCSA telnet is one of the most used telnet clients for the Macintosh. It has # been maintained until recently by the National Center for Supercomputer # Applications, and it is feature rich, stable and free. It can be downloaded # from www.ncsa.edu. This terminfo description file is based on xterm-vt220, # xterm+sl, and the docs at NCSA. It works well. # # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode # The terminal options should be set as follows: # Xterm sequences ON # use VT wrap mode ON # use Emacs arrow keys OFF # CTRL-COMND is Emacs meta ON # 8 bit mode ON # answerback string: "ncsa-vt220-8" # setup keys: all disabled # # Application mode is not used. # # Other special mappings: # Apple VT220 # HELP Find # HOME Insert here # PAGEUP Remove # DEL Select # END Prev Screen # PAGEDOWN Next Screen # # Though it supports ANSI color, NCSA Telnet uses color to represent blinking # text. # # The status-line manipulation is a mapping of the xterm-compatible control # sequences for setting the window-title. So you must use tsl and fsl in # pairs, since the latter ends the string that is loaded to the window-title. ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, am, hs, km, mir, msgr, xenl, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, u8=\E[?62;1;6c, use=ansi+enq, ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, use=ncsa-m, use=klone+color, ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, hs@, dsl@, fsl@, tsl@, use=ncsa, ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, hs@, dsl@, fsl@, tsl@, use=ncsa-m, # alternate -TD: # The documented function-key mapping refers to the Apple Extended Keyboard # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on # some keyboards and many applications require these as F1-F4. # ncsa-vt220|NCSA Telnet using vt220-compatible function keys, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=ncsa, #### Pilot Pro Palm-Top # # Termcap for Top Gun Telnet and SSH on the Palm Pilot. # http://www.ai/~iang/TGssh/ pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, OTbs, am, xenl, cols#39, lines#16, bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, rmso=\EB, smso=\Eb, # From: Federico Bianchi # These entries are for the Embeddable Linux Kernel System (ELKS) # project - an heavily stripped down Linux to be run on 16 bit # boxes or, eventually, to be used in embedded systems - and have been # adapted from the stock ELKS termcap. The project itself looks stalled, # and the latest improvements I know of date back to March 2000. # # To cope with the ELKS dumb console I added an "elks-glasstty" entry; # as an added bonus, this deals with all the capabilities common to # both VT52 and ANSI (or, eventually, "special") modes. elks-glasstty|ELKS glass-TTY capabilities, OTbs, am, cols#80, it#8, lines#25, bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, elks-vt52|ELKS vt52 console, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, home=\EH, use=elks-glasstty, elks-ansi|ELKS ANSI console, clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, rmso=\E[m, smso=\E[7m, use=elks-glasstty, # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation # instead of VT52, but the "elks" entry still refers to the latter. elks|default ELKS console, use=elks-vt52, # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS # one but in screen size sibo|ELKS SIBO console, cols#61, it#8, lines#20, use=elks-vt52, ######## COMMERCIAL WORKSTATION CONSOLES # #### Alpha consoles # # This is from the OSF/1 Release 1.0 termcap file pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, am, xon, cols#80, lines#25, bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, #### Sun consoles # # :is1: resets scrolling region in case a previous user had used "tset vt100" oldsun|Sun Microsystems Workstation console, OTbs, am, km, mir, msgr, cols#80, it#8, lines#34, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rmso=\E[m, sgr0=\E[m, smso=\E[7m, # From: Alexander Lukyanov , 14 Nov 1995 # capability later corrected by J.T. Conklin # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) sun-il|Sun Microsystems console with working insert-line, am, km, msgr, cols#80, lines#34, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m, u8=\E[1t, u9=\E[11t, # On some versions of CGSIX framebuffer firmware (SparcStation 5), / # flake out on the last line. Unfortunately, without them the terminal has no # way to scroll. sun-cgsix|sun-ss5|Sun SparcStation 5 console, il@, il1@, use=sun-il, # If you are using an SS5, change the sun definition to use sun-ss5. sun|sun1|sun2|Sun Microsystems Inc. workstation console, use=sun-il, # From: Tue Sep 24 13:14:44 1985 sun-s|Sun Microsystems Workstation window with status line, hs, dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, hs, dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, sun-48|Sun 48-line window, cols#80, lines#48, use=sun, sun-34|Sun 34-line window, cols#80, lines#34, use=sun, sun-24|Sun 24-line window, cols#80, lines#24, use=sun, sun-17|Sun 17-line window, cols#80, lines#17, use=sun, sun-12|Sun 12-line window, cols#80, lines#12, use=sun, sun-1|Sun 1-line window for sysline, eslok, hs, cols#80, lines#1, dsl=^L, fsl=\E[K, tsl=^M, use=sun, sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, ich1@, rmir@, smir@, use=sun, sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, lines#35, rmcup=\E[>4h, smcup=\E[>4l, use=sun, sun-type4|Sun Workstation console with type 4 keyboard, kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, kcuu1=\E[215z, use=sun-il, # Most of the current references to sun-color are from users wondering why this # is the default on install. Details from reading the wscons manpage, adding # cub, etc., here (rather than in the base sun-il entry) since it is not clear # when those were added -TD (2005-05-28) # # According to wscons manpage, color is supported only on IA systems. # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons # does not list these. It also sets ncv#3, however that corresponds to # underline and standout. # # Since the documentation and terminfo do not agree, see also current code at # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c # # That (actually a different driver which "supports" sun-color) also supports # these features: # vpa=\E[%i%p1%dd # hpa=\E[%i%p1%d` # cbt=\E[Z # dim=\E[2m # blink=\E[5m # It supports bold, but not underline -TD (2009-09-19) sun-color|Sun Microsystems Workstation console with color support (IA systems), colors#8, ncv#3, pairs#64, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\E[0%?%p1;1%;%?%p3%;7%;m, sgr0=\E[m, smso=\E[1m, use=sun, #### Iris consoles # # (wsiris: this had extension capabilities # :HS=\E7F2:HE=\E7F7:\ # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: # See the note on Iris extensions near the end of this file. # Finally, removed suboptimal =\EH\EJ and added & # from BRL -- esr) wsiris|iris40|iris emulating a 40 line visual 50 (approximately), OTbs, OTnc, OTpt, am, OTkn#3, cols#80, it#8, lines#40, OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, smul=\E7R2\E9P, #### NeWS consoles # # Console terminal windows under the NeWS (Sun's Display Postscript windowing # environment). Note: these have nothing to do with Sony's News workstation # line. # # Entry for NeWS's psterm from Eric Messick & Hugh Daniel # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) psterm|psterm-basic|NeWS psterm-80x34, OTbs, am, hs, km, ul, cols#80, it#8, lines#34, blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, tsl=\EOl, psterm-96x48|NeWS psterm 96x48, cols#96, lines#48, use=psterm, psterm-90x28|NeWS psterm 90x28, cols#90, lines#28, use=psterm, psterm-80x24|NeWS psterm 80x24, cols#80, lines#24, use=psterm, # This is a faster termcap for psterm. Warning: if you use this termcap, # some control characters you type will do strange things to the screen. # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) psterm-fast|NeWS psterm fast version (flaky ctrl chars), OTbs, am, hs, km, ul, cols#80, it#8, lines#34, blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, smso=^Oo, smul=^Ou, tsl=^Ol, #### NeXT consoles # # Use `glasstty' for the Workspace application # # From: Dave Wetzel 22 Dec 1995 next|NeXT console, am, xt, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, nextshell|NeXT Shell application, am, cols#80, bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, #### Sony NEWS workstations # # (news-unk: this had :KB=news: -- esr) news-unk|SONY NEWS vt100 emulator common entry, OTbs, OTpt, am, xenl, cols#80, OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # # (news-29: this had :TY=ascii: --esr) news-29, lines#29, use=news-unk, # (news-29-euc: this had :TY=euc: --esr) news-29-euc, use=news-29, # (news-29-sjis: this had :TY=sjis: --esr) news-29-sjis, use=news-29, # # (news-33: this had :TY=ascii: --esr) news-33, lines#33, use=news-unk, # (news-33-euc: this had :TY=euc: --esr) news-33-euc, use=news-33, # (news-33-sjis: this had :TY=sjis: --esr) news-33-sjis, use=news-33, # # (news-42: this had :TY=ascii: --esr) news-42, lines#42, use=news-unk, # (news-42-euc: this had :TY=euc: --esr) news-42-euc, use=news-42, # (news-42-sjis: this had :TY=sjis: --esr) news-42-sjis, use=news-42, # # NEWS-OS old termcap entry # # (news-old-unk: this had :KB=news:TY=sjis: --esr) news-old-unk|SONY NEWS vt100 emulator common entry, OTbs, OTpt, am, xenl, cols#80, vt#3, OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # # (nwp512: this had :DE=^H:, which I think means --esr) nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, OTbs, lines#40, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk, # # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, lines#42, is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, use=news-old-unk, # # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as . --esr) nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, OTbs, lines#40, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk, # # (nwp513: this had :DE=^H: and the alias vt100-bm --esr) nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, OTbs, lines#31, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk, # # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as ; --esr) # also the alias vt100-bm. nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, OTbs, lines#33, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk, # # (nwp513-o: had :DE=^H:, I think that's ; also the alias vt100-bm --esr) nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, OTbs, lines#31, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk, # # (news28: this had :DE=^H:, I think that's , and :KB=nws1200: --esr) news28|sony vt100 emulator 28 lines, OTbs, lines#28, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, use=news-old-unk, # # (news29: this had :TY=ascii:KB=nws1200:\ --esr) news29|news28-a|sony vt100 emulator 29 lines, lines#29, is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, use=news-old-unk, # # (news511: this had :TY=sjis: --esr) nwp511|nwp-511|nwp-511 vt100, OTbs, OTpt, am, xenl, cols#80, lines#24, clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, ed=\E[J$<30/>, el=\E[K$<3/>, flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, smso=\E[7m$<2/>, smul=\E[4m$<2/>, # (news517: this had :TY=sjis:. --esr) nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, eslok, hs, cols#80, lines#30, OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, tsl=\E[1$}\E[;%df, use=vt200, # (news517-w: this had :TY=sjis:. --esr) nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, eslok, hs, cols#132, lines#50, OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, tsl=\E[1$}\E[;%df, use=vt200, #### Common Desktop Environment # # This ships with Sun's CDE in Solaris 2.5 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov dtterm|CDE desktop terminal, am, mir, msgr, xenl, xon, cols#80, it#8, lines#24, lm#0, ncv@, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, sc=\E7, sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, #### Non-Unix Consoles # #### EMX termcap.dat compatibility modes # # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the # no_color_video to inform the application that standout(1), underline(2) # reverse(4) and invisible(64) don't work with color. emx-base|DOS special keys, bce, bw, it#8, ncv#71, bel=^G, use=ansi.sys, # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, # a Unix-style environment used on OS/2. (Note that the suffix makes some # names longer than 14 characters, the nominal maximum). # # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. ansi-emx|ANSI.SYS color, am, bce, eo, mir, msgr, xon, colors#8, cols#80, it#8, lines#25, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base, # nice colors for Emacs (white on blue, mode line white on cyan) ansi-color-2-emx|ANSI.SYS color 2, clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, smul=\E[1;36;44m, use=ansi-emx, # nice colors for Emacs (white on black, mode line black on cyan) ansi-color-3-emx|ANSI.SYS color 3, clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, smul=\E[0;36;40m, use=ansi-emx, mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, am, cols#80, it#8, lines#24, clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, sgr0=\E[0m, # Use this for cygwin32 (tested with beta 19.1) # underline is colored bright magenta # shifted kf1-kf12 are kf11-kf22 cygwinB19|ansi emulation for cygwin32, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, use=ansi.sys, # Use this for cygwin (tested with version 1.1.0). # I've combined pcansi and linux. Some values of course were different and # I've indicated which of these were and which I used. # Cheers, earnie_boyd@yahoo.com # several changes based on running with tack and comparing with older entry -TD # more changes from csw: # add cbt [backtab] # remove eo [erase overstrike with blank] # change clear was \E[H\E[J now \E[2J (faster?) # remove cols # remove lines # remove ncv#3 [colors collide with highlights, bitmask] not applicable # to MSDOS box? # add cub [cursor back param] # add cuf [cursor forward param] # add cuu [cursor up param] # add cud [cursor down param] # add hs [has status line] # add fsl [return from status line] # add tsl [go to status line] # add smacs [Start alt charset] (not sure if this works) # add rmacs [End alt charset] (ditto) # add smcup [enter_ca_mode] (save console; thanks Corinna) # add rmcup [exit_ca_mode] (restore console; thanks Corinna) # add kb2 [center of keypad] # add u8 [user string 8] \E[?6c # add el [clear to end of line] \E[K # Notes: # cnorm [make cursor normal] not implemented # flash [flash] not implemented # blink [blink] not implemented very usefully in cygwin? \E[5m # dim [dim] not implemented very usefully in cygwin? \E[2m # cub1 [cursor back 1] typically \E[D, but ^H is faster? # kNXT [shifted next key] not implemented # kPRV [shifted prev key] not implemented # khome [home key] really is \E[1~ NOT \E[H # tbc [clear tab stops] not implemented # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni # smpch [Start PC charset] is \E[11m, same as smacs # rmpch [End PC charset] is \E[10m, same as rmacs # mir [move in insert mode] fails in tack? # bce [back color erase] causes problems with change background color? # cvvis [make cursor very visible] causes a stackdump when testing with # testcurs using the output option? \E[?25h\E[?8c # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c # ech [erase characters param] broken \E[%p1%dX # kcbt [back-tab key] not implemented in cygwin? \E[Z # # 2005/11/12 -TD # Remove cbt since it does not work in current cygwin # Add 'mir' and 'in' flags based on tack cygwin|ansi emulation for Cygwin, am, hs, mir, msgr, xon, colors#8, it#8, pairs#64, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, vpa=\E[%i%p1%dd, use=vt102+enq, # I've supplied this so that you can help test new values and add other # features. Cheers, earnie_boyd@yahoo.com. # # Some features are from pcansi. The op value is from linux. Function-keys # are from linux. These have been tested not to cause problems. xenl was in # this list, but DOES cause problems so it has been removed cygwinDBG|Debug Version for Cygwin, am, eo, mir, msgr, xon, colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, # Key definitions: # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the # encodings used by other x86 environments. All others are invented for DJGPP. # Oddly enough, while several combinations of modifiers are tabulated, there is # none for shifted cursor keys. # # F1 \E[[A # F2 \E[[B # F3 \E[[C # F4 \E[[D # F5 \E[[E # F6 \E[17~ # F7 \E[18~ # F8 \E[19~ # F9 \E[20~ # F10 \E[21~ # F11 \E[23~ # F12 \E[24~ # # Delete \E[3~ # Down Arrow \E[B # End \E[4~ # Home \E[1~ # Insert \E[2~ # Left Arrow \E[D # Page Down \E[6~ # Page Up \E[5~ # Right Arrow \E[C # Up Arrow \E[A # # Shift-F1 \E[25~ # Shift-F2 \E[26~ # Shift-F3 \E[27~ # Shift-F4 \E[28~ # Shift-F5 \E[29~ # Shift-F6 \E[30~ # Shift-F7 \E[31~ # Shift-F8 \E[32~ # Shift-F9 \E[33~ # Shift-F10 \E[34~ # Shift-F11 \E[35~ # Shift-F12 \E[36~ # # Ctrl-F1 \E[47~ # Ctrl-F2 \E[48~ # Ctrl-F3 \E[49~ # Ctrl-F4 \E[50~ # Ctrl-F5 \E[51~ # Ctrl-F6 \E[52~ # Ctrl-F7 \E[53~ # Ctrl-F8 \E[54~ # Ctrl-F9 \E[55~ # Ctrl-F10 \E[56~ # Ctrl-F11 \E[57~ # Ctrl-F12 \E[58~ # # Ctrl-Delete \E[43~ # Ctrl-Down Arrow \E[38~ # Ctrl-End \E[44~ # Ctrl-Home \E[41~ # Ctrl-Insert \E[42~ # Ctrl-Left Arrow \E[39~ # Ctrl-Page Down \E[46~ # Ctrl-Page Up \E[45~ # Ctrl-Right Arrow \E[40~ # Ctrl-Up Arrow \E[37~ # # Alt-F1 \E[59~ # Alt-F2 \E[60~ # Alt-F3 \E[61~ # Alt-F4 \E[62~ # Alt-F5 \E[63~ # Alt-F6 \E[64~ # Alt-F7 \E[65~ # Alt-F8 \E[66~ # Alt-F9 \E[67~ # Alt-F10 \E[68~ # Alt-F11 \E[79~ # Alt-F12 \E[80~ # # Alt-Delete \E[65~ # Alt-Down Arrow \E[60~ # Alt-End \E[66~ # Alt-Home \E[41~ # Alt-Insert \E[64~ # Alt-Left Arrow \E[61~ # Alt-Page Down \E[68~ # Alt-Page Up \E[67~ # Alt-Right Arrow \E[62~ # Alt-Up Arrow \E[59~ # # Also: # Alt-A \E[82~ # Alt-B \E[82~ # Alt-C \E[83~ # Alt-D \E[84~ # Alt-E \E[85~ # Alt-F \E[86~ # Alt-G \E[87~ # Alt-H \E[88~ # Alt-I \E[89~ # Alt-J \E[90~ # Alt-K \E[91~ # Alt-L \E[92~ # Alt-M \E[93~ # Alt-N \E[94~ # Alt-O \E[95~ # Alt-P \E[96~ # Alt-Q \E[97~ # Alt-R \E[98~ # Alt-S \E[99~ # Alt-T \E[100~ # Alt-U \E[101~ # Alt-V \E[102~ # Alt-W \E[103~ # Alt-X \E[104~ # Alt-Y \E[105~ # Alt-Z \E[106~ djgpp|ansi emulation for DJGPP alpha, am, bce, msgr, xhp, xon, xt, colors#8, it#8, pairs#64, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, djgpp203|Entry for DJGPP 2.03, OTbs, am, cols#80, it#8, lines#25, bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, djgpp204|Entry for DJGPP 2.04, OTbs, am, AX, colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, # This is tested using U/Win's telnet. Scrolling is omitted because it is # buggy. Another odd bug appears when displaying "~" in alternate character # set (the emulator spits out error messages). Compare with att6386 -TD uwin|U/Win 3.2 console, am, eo, in, msgr, xenl, xon, colors#8, it#8, ncv#58, pairs#64, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, # This entry fits the Windows NT console when the _POSIX_TERM environment # variable is set to 'on'. While the Windows NT POSIX console is seldom used, # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating # systems is not, and (surprise!) they match very well. # # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only # are the installation instructions a pile of mind-numbing bureaucratese, # but the termcap entry is actually broken and unusable as given; the :do: # capability is misspelled "d". # # To use this, you need to a bunch of environment variables: # # SET _POSIX_TERM=on # SET TERM=ansi # SET TERMCAP=location of termcap file in POSIX file format # which is case-sensitive. # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap # SET TMP=//C/TEMP # # Important note: setting the TMP environment variable in POSIX style renders # it incompatible with a lot of other applications, including Visual C++. So # you should have a separate command window just for vi. All the other # variables may be permanently set in the Control Panel\System applet. # # You can find out more about the restrictions of this facility at # . # # From: Federico Bianchi , 15 Jan 1997 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, am, bw, msgr, cols#80, it#8, lines#25, bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, # From: jew@venus.sunquest.com # Date: 19 Feb 93 23:41:07 GMT # Here's a combination of ansi and vt100 termcap # entries that works nearly perfectly for me # (Gateway 2000 Handbook and Microsoft Works 3.0): pcmw|PC running Microsoft Works, am, xenl, cols#80, it#8, lines#24, vt#3, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, tbc=\E[3g$<2/>, # From: Federico Bianchi # This is the entry for the OpenNT terminal. # The ntconsole name is for backward compatability. # This is for OpenNT 2.0 and later. # Later OpenNT was renamed to Interix. # # Presently it is distributed by Microsoft as Services For Unix (SFU). # The 3.5 beta contains ncurses 4.2 (that is header files and executables, # the documentation dates from 1.9.9e) -TD interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, am, bw, msgr, colors#8, cols#80, lines#25, ncv#3, pairs#64, acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m, opennt-35|ntconsole-35|OpenNT-term35 compatible with color, lines#35, use=opennt, opennt-50|ntconsole-50|OpenNT-term50 compatible with color, lines#50, use=opennt, opennt-60|ntconsole-60|OpenNT-term60 compatible with color, lines#60, use=opennt, opennt-100|ntconsole-100|OpenNT-term100 compatible with color, lines#100, use=opennt, # OpenNT wide terminals opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, cols#125, use=opennt, opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, lines#35, use=opennt-w, opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, lines#50, use=opennt-w, opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, lines#60, use=opennt-w, opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, cols#132, use=opennt, # OpenNT terminals with no smcup/rmcup (names match termcap entries) interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, rmcup@, smcup@, use=opennt, opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, lines#35, use=opennt-nti, opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, lines#50, use=opennt-nti, opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, lines#60, use=opennt-nti, opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, lines#100, use=opennt-nti, ######## COMMON TERMINAL TYPES # # This section describes terminal classes and maker brands that are still # quite common, but have proprietary command sets not blessed by ANSI. # #### Altos # # Altos made a moderately successful line of UNIX boxes. In 1990 they were # bought out by Acer, a major Taiwanese manufacturer of PC-clones. # Acer has a web site at http://www.acer.com. # # Altos descriptions from Ted Mittelstaedt 4 Sep 1993 # His comments suggest they were shipped with the system. # # (altos2: had extension capabilities # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ # :HL=^AP\r:SP=\E[i:\ # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ # Comparison with the k* capabilities makes it obvious that the c* things are # shift keys. I have renamed them to keys 32 and up accordingly. Also, # :sr: was given as a boolean-- esr) altos2|alt2|altos-2|altos II, cols#80, it#8, lines#24, xmc#0, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, # (altos3: had extension capabilities # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ # :HL=^AP\r:SP=\E[i:\ # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, altos4|alt4|altos-4|altos IV, use=wy50, # (altos7: had extension capabilities: # :GG#0:GI=\EH8:GF=\EH7:\ # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: # Comparison with the k* capabilities makes it obvious that the c* things are # shift keys. I have renamed them to keys 32 and up accordingly. I have # also made this entry relative to adm12 in order to give it an . The # imported by use=adm+sgr may work, let me know. -- esr) altos7|alt7|altos VII, am, mir, cols#80, lines#24, xmc#0, acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, ind=^J, invis=\EG1, is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, altos7pc|alt7pc|altos PC VII, kend=\ET, use=altos7, #### Hewlett-Packard (hp) # # Hewlett-Packard # 8000 Foothills Blvd # Roseville, CA 95747 # Vox: 1-(916)-785-4363 (Technical response line for VDTs) # 1-(800)-633-3600 (General customer support) # # # As of March 1998, HP no longer has any terminals in production. # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being # supported (they still have parts). So are the 2392a and 2394a. # See the WORKSTATION CONSOLES section for the 700s. # # Generic HP terminal - this should (hopefully) work on any HP terminal. hpgeneric|hp|hewlett-packard generic terminal, OTbs, OTpt, am, da, db, mir, xhp, cols#80, lines#24, lm#0, vt#6, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, hp110|hewlett-packard model 110 portable, lines#16, use=hpgeneric, hp+pfk+cr|hp function keys with CR, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, hp+pfk-cr|hp function keys w/o CR, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, # The hp2621s use the same keys for the arrows and function keys, # but not separate escape sequences. These definitions allow the # user to use those keys as arrow keys rather than as function # keys. hp+pfk+arrows|hp alternate arrow definitions, kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, kll=\Eq\r, kri=\Es\r, hp+arrows|hp arrow definitions, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, kind=\ES, kll=\EF, kri=\ET, # Generic stuff from the HP 262x series # hp262x|HP 262x terminals, xhp, blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, # Note: no on HPs since that homes to top of memory, not screen. # Due to severe 2621 braindamage, the only way to get the arrow keys to # transmit anything at all is to turn on the function key labels # with , and even then the user has to hold down shift! # The default 2621 turns off the labels except when it has to to # enable the function keys. If your installation prefers labels # on all the time, or off all the time (at the "expense" of the # function keys), use 2621-nl or 2621-wl. # # Note: there are newer ROMs for 2621's that allow you to set # strap A so the regular arrow keys xmit \EA, etc, as with the # 2645. However, even with this strap set, the terminal stops # xmitting if you reset it, until you unset and reset the strap! # Since there is no way to set/unset the strap with an escape # sequence, we don't use it in the default. # If you like, you can use 2621-ba (brain-damaged arrow keys). hp2621-ba|2621 w/new rom and strap A set, rmkx@, smkx@, use=hp+arrows, use=hp2621, # hp2621 with function labels. Most of the time they are off, # but inside vi, the function key labels appear. You have to # hold down shift to get them to xmit. hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, hp2621-fl|hp 2621, xhp@, xon, pb#19200, cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, use=hp+pfk+cr, use=hpgeneric, # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p hp2621p|hp 2621 with printer, mc4=\E&p13C, mc5=\E&p11C, use=hp2621, hp2621p-a|hp2621p with fn as arrows, use=hp+pfk+arrows, use=hp2621p, # hp2621 with k45 keyboard hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, # 2621 using all 48 lines of memory, only 24 visible at any time. hp2621-48|48 line 2621, lines#48, cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, use=hp2621, # 2621 with no labels ever. Also prevents vi delays on escape. hp2621-nl|hp 2621 with no labels, kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, use=hp2621-fl, # Needed for UCB ARPAVAX console, since lsi-11 expands tabs # (wrong). # hp2621-nt|hp 2621 w/no tabs, ht@, use=hp2621, # Hp 2624 B with 4 or 10 pages of memory. # # Some assumptions are made with this entry. These settings are # NOT set up by the initialization strings. # # Port Configuration # RecvPace=Xon/Xoff # XmitPace=Xon/Xoff # StripNulDel=Yes # # Terminal Configuration # InhHndShk=Yes # InhDC2=Yes # XmitFnctn(A)=No # InhEolWrp=No # # Note: the 2624 DOES have a true , believe it or not! # # The 2624 has an "error line" to which messages can be sent. # This is CLOSE to what is expected for a "status line". However, # after a message is sent to the "error line", the next carriage # return is EATEN and the "error line" is turned back off again! # So I guess we can't define , , , , , . # # This entry supports emacs (and any other program that uses raw # mode) at 4800 baud and less. I couldn't get the padding right # for 9600. # # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, da, db, lm#96, flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp, # This hp2626 entry does not use any of the fancy windowing stuff # of the 2626. # # Indeed, terminfo does not yet handle such stuff. Since changing # any window clears memory, it is probably not possible to use # this for screen opt. # # ed is incredibly slow most of the time - I am guessing at the # exact padding. Since the terminal uses xoff/xon this is intended # only for cost computation, so that the terminal will prefer el # or even dl1 which is probably faster! # # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only # extra slow on the last line of the window. # # The padding probably should be changed. # hp2626|hp2626a|hp2626p|hp 2626, da, db, lm#0, pb#19200, ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr, use=hp+labels, use=scrhp, # This entry is for sysline. It allocates a 23 line window with # a 115 line workspace for regular use, and a 1 line window for # the status line. # # This assumes port 2 is being used. # Turn off horizontal line, Create ws #1 with 115 lines, # Create ws #2 with 1 line, Create window #1 lines 1-23, # Create window #2 lines 24-24, Attach cursor to workspace #1. # Note that this clears the tabs so it must be done by tset before # it sets the tabs. # hp2626-s|hp 2626 using only 23 lines, eslok, hs, lines#23, fsl=\E&d@\E&w7f2p1I\E&w4f1I, is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, # Force terminal back to 24 lines after being 23. hp2626-ns|hp 2626 using all 24 lines, is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, use=hp2626, # Various entries useful for small windows on 2626. hp2626-12|hewlett-packard 2626 12 lines, lines#12, use=hp2626, hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, cols#40, lines#12, use=hp2626, hp2626-x40|hewlett-packard 2626 40 columns, cols#40, use=hp2626, hp2626-12-s|hewlett-packard 2626 11 lines plus status, lines#11, use=hp2626-s, # # hp2627 color tubes from University of Wisconsin # hp2627a-rev|hp 2627 with reverse video colors, cr=^M, cud1=^J, ht=^I, ind=^J, is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, smul=\E&dD\E&v1S, use=hp2621-nl, hp2627a|hp 2627 color terminal with no labels, cr=^M, cud1=^J, ht=^I, ind=^J, is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, use=hp2621-nl, hp2627c|hp 2627 color (cyan) terminal with no labels, cr=^M, cud1=^J, ht=^I, ind=^J, is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, # hp2640a doesn't have the Y cursor addressing feature, and C is # memory relative instead of screen relative, as we need. # hp2640a|hp 2640a, cup@, rmkx@, smkx@, use=hp2645, hp2640b|hp2644a|hp 264x series, rmkx@, smkx@, use=hp2645, # (hp2641a: removed unknown :gu: -- esr) hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, am, da, db, mir, xhp, cols#80, lines#24, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, if=/usr/share/tabset/std, il1=\EL, ind=^J, is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, vpa=\E&a%p1%2dY, # This terminal should be used at 4800 baud or less. It needs padding for # plain characters at 9600, I guessed at an appropriate cr delay. It really # wants ^E/^F handshaking, but that doesn't work well even if you write # software to support it. hp2645|hp45|HP 2645 series, pb#9600, blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, rmkx=\E&s0A, sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, # You should use this terminal at 4800 baud or less. hp2648|hp2648a|HP 2648a graphics terminal, clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, dch1=\EP$<7>, ip=$<5>, use=hp2645, # The HP 150 terminal is a fairly vanilla HP terminal, with the # clreol standout problem. It also has graphics capabilities and # a touch screen, which we don't describe here. hp150|hewlett packard Model 150, OTbs, use=hp2622, # HP 2382a terminals, "the little ones." They don't have any # alternate character set support and sending out ^N/^O will # leave the screen blank. hp2382a|hp2382|hewlett packard 2382a, da, db, lh#1, lm#48, acsc@, pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, rmacs@, sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, hp2621-a|hp2621a-a|hp2621 with fn as arrows, use=hp+pfk+arrows, use=hp2621-fl, # newer hewlett packard terminals newhpkeyboard|generic entry for HP extended keyboard, kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, use=hp+pfk-cr, newhp|generic entry for new hewlett packard terminals, am, bw, mir, xhp, xon, cols#80, lines#24, pb#4800, acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, use=newhpkeyboard, memhp|memory relative addressing for new HP ttys, vt#6, clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, scrhp|screen relative addressing for new HP ttys, clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, # (hp+labels: added label values from a BRL termcap -- esr) hp+labels|"standard" label info for new HP ttys, lh#2, lw#8, nlab#8, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, rmln=\E&j@, smln=\E&jB, hp+printer|"standard" printer info for HP ttys, ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, # The new hp2621b is kind of a cross between the old 2621 and the # new 262x series of machines. It has dip-switched options. # The firmware has a bug in it such that if you give it a null # length label, the following character is eaten! hp2621b|hp 2621b with old style keyboard, lh#1, lm#48, lw#8, nlab#8, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, kind=\ET, kll=\EF, kri=\ES, pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, smln=\E&jB, use=hp2621, hp2621b-p|hp 2621b with printer, use=hp+printer, use=hp2621b, # hp2621b - new 2621b with new extended keyboard # these are closer to the new 26xx series than the other 2621b hp2621b-kx|hp 2621b with extended keyboard, use=newhpkeyboard, use=hp2621b, hp2621b-kx-p|hp 2621b with new keyboard & printer, use=hp+printer, use=hp2621b-kx, # Some assumptions are made in the following entries. # These settings are NOT set up by the initialization strings. # # Port Configuration # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes # # Terminal Configuration # InhHndShk(G)=Yes InhDC2(H)=Yes # XmitFnctn(A)=No InhEolWrp=No # # # Hp 2622a & hp2623a display and graphics terminals # hp2622|hp2622a|hp 2622, da, db, lm#0, pb#19200, is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, # The 2623 is a 2622 with extra graphics hardware. hp2623|hp2623a|hp 2623, use=hp2622, hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, use=hp+printer, use=hp2624, # The hewlett packard B can have an optional extra 6 pages of memory. hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, lm#240, use=hp2624, hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, lm#240, use=hp2624b-p, # Color manipulations for HP terminals hp+color|hp with colors, ccc, colors#16, ncv#17, pairs#7, initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, op=\E&v0S, scp=\E&v%p1%dS, # sets the screen to be 80 columns wide hp2397a|hp2397|hewlett packard 2397A color terminal, is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, # HP 700/44 Setup parameters: # Terminal Mode HP-PCterm # Inhibit Auto Wrap NO # Status Line Host Writable # PC Character Set YES # Twenty-Five Line Mode YES # XON/XOFF @128 or 64 (sc) # Keycode Mode NO or YES (sc) # Backspace Key BS or BS/DEL # # sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; # \E\\? does not turn off keycode mode # sets alternate start/stop; keycode on hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, am, eo, xenl, xon, cols#80, lines#25, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=^J, is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, kpp=\E[5~, rmam=\E[?7l, rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, smul=\E[4m, xoffc=g, xonc=e, # # (hp2392: copied here from hpex -- esr) hp2392|239x series, cols#80, cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, hpsub|hp terminals -- capability subset, am, da, db, mir, xhp, xon, lines#24, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, # hpex: # May be used for most 24 x 80 hp terminals, # but has no padding added, so may allow runover in some terminals at high # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and # hp98x5 terminal emulators or hp98x6 consoles. # Adds xy-cursor addressing, vertical cursor addressing, home, # last line, and underline capabilities. # # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", # moved here from hpsub -- esr) hpex|hp extended capabilites, cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, # From: Ville Sulko , 05 Aug 1996 hp2|hpex2|hewlett-packard extended capabilities newer version, am, da, db, mir, xhp, cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # HP 236 console # From: hp236|hp236 internal terminal emulator, OTbs, am, cols#80, lines#24, clear=\EF, cnorm=\EDE, cub1=^H, cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, sgr0=\ECI, smso=\EBI, # This works on a hp300 console running Utah 4.3 BSD # From: Craig Leres hp300h|HP Catseye console, OTbs, am, da, db, mir, xhp, cols#128, lines#51, lm#0, xmc#0, bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # From: Greg Couch hp9837|hp98720|hp98721|HP 9000/300 workstations, OTbs, am, da, db, mir, xhp, cols#128, it#8, lines#46, lm#0, bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # HP 9845 desktop computer from BRL # (hp9845: removed unknown capability :gu: -- esr) hp9845|HP 9845, OTbs, am, da, db, eo, mir, xhp, cols#80, lines#21, OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, # From: Charles A. Finnell of MITRE , developed 07SEP90 # (hp98550: replaced /usr/share/tabset/9837 with std because ,; # added empty to avoid warnings re / --esr) hp98550|hp98550a|HP 9000 Series 300 color console, OTbs, am, da, db, mir, xhp, cols#128, it#8, lines#49, lm#0, acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # From: Victor Duchovni # (hp700-wy: removed obsolete ":nl=^J:"; # replaced /usr/share/tabset/hp700-wy with std because , -- esr) hp700-wy|HP700/41 emulating wyse30, OTbs, am, bw, mir, msgr, cols#80, it#8, lines#24, xmc#1, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, hp70092|hp70092a|hp70092A|HP 700/92, am, da, db, xhp, cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, bobcat|sbobcat|HP 9000 model 300 console, am, da, db, mir, xhp, cols#128, it#8, lines#47, xmc#0, cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, gator-t|HP 9000 model 237 emulating extra-tall AAA, lines#94, use=gator, gator|HP 9000 model 237 emulating AAA, bw, km, mir, ul, cols#128, it#8, lines#47, bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, gator-52|HP 9000 model 237 emulating VT52, cols#128, lines#47, use=vt52, gator-52t|HP 9000 model 237 emulating extra-tall VT52, lines#94, use=gator-52, #### Honeywell-Bull # # From: Michael Haardt 11 Jan 93 # # Honeywell Bull terminal. Its cursor and function keys send single # control characters and it has standout/underline glitch. Most programs # do not like these features/bugs. Visual bell is realized by flashing the # "keyboard locked" LED. dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, cols#80, lines#25, clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, dku7003|Honeywell Bull DKU 7003 all features described, msgr, xmc#1, blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, use=dku7003-dumb, #### Lear-Siegler (adm) # # These guys are long since out of the terminals business, but # in 1995 many current terminals still have an adm type as one of their # emulations (usually their stupidest, and usually labeled adm3, though # these `adm3' emulations normally have adm3a+ capabilities). # # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') # was being held to ground would trigger a send of the top line on the screen. # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 # hanging in the air. (Thanks to Eric Fischer, , # for clearing up this point.) adm1a|adm1|lsi adm1a, am, cols#80, lines#24, bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, ind=^J, adm2|lsi adm2, OTbs, am, cols#80, lines#24, bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, # (adm3: removed obsolete ":ma=^K^P:" -- esr) adm3|lsi adm3, OTbs, am, cols#80, lines#24, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, # The following ADM-3A switch settings are assumed for normal operation: # SPACE U/L_DISP CLR_SCRN 24_LINE # CUR_CTL LC_EN AUTO_NL FDX # Other switches may be set for operator convenience or communication # requirements. I recommend # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF # ETX_OFF EOT_OFF # Most of these terminals required an option ROM to support lower case display. # Open the case and look at the motherboard; if you see an open 24-pin DIP # socket, you may be out of luck. # # (adm3a: some capabilities merged in from BRl entry -- esr) adm3a|lsi adm3a, OTbs, am, cols#80, lines#24, OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rs2=^N, adm3a+|adm3a plus, kbs=^H, use=adm3a, # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) adm5|lsi adm5, xmc#1, bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, rmso=\EG, smso=\EG, use=adm3a+, # A lot of terminals other than adm11s use these. Wherever you see # use=adm+sgr with some of its capabilities disabled, try the # disabled ones. They may well work but not have been documented or # expressed in the using entry. We'd like to cook up an but the # / sequences of the using entries vary too much. adm+sgr|adm style highlight capabilities, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, smso=\EG4, smul=\EG8, # LSI ADM-11 from George William Hartwig, Jr. via BRL # Status line additions from Stephen J. Muir # from . could also # be ^Z, according to his entry. # (adm11: =\EG4 was obviously erroneous because it also said # =\EG4. Looking at other ADMs confirms this -- esr) adm11|LSI ADM-11, OTbs, am, hs, OTkn#8, cols#80, lines#24, OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), use=adm+sgr, # From: Andrew Scott Beals # Corrected by Olaf Siebert , 11 May 1995 # Supervisor mode info by Ari Wuolle, , 27 Aug 1996 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had # =\Eq but that looked wrong; this is from Dave Yost # via BRL. That entry asserted , but I've left that out because # neither earlier nor later ADMSs have it -- esr) # # You will need to get into the supervisor setup before you can set # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should # see a lot more setup options. # # While in supervisor setup you can also use following codes: # # Ctrl-P Personality character selections (configure for example what # arrow keys send, if I recall correctly) # Ctrl-T tabs 1-80 use left&right to move and up to set and # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor # Ctrl-B Binary setup (probably not needed. I think that everything can # be set using normal setup) # Ctrl-A Answerback mode (enter answerback message) # Ctrl-U User friendly mode (normal setup) # Ctrl-D Defaults entire setup and function keys from EPROM tables # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. # Ctrl-R Reads both setup and functions keys from NVM. # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status # # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to # RTS/CTS used nowadays with virtually every modem and computer. 19200 # bps works fine with hardware flow control. # # The following null-modem cable should fix this and enable you to use # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also # set ADM-12+ for DTR handshaking from supervisor setup. # # PC Serial ADM-12+ # -------- ------- # 2 - 3 # 3 - 2 # 4 - 5 # 5 - 20 # 6,8 - 4 # 7 - 7 # 20 - 6,8 # adm12|lsi adm12, OTbs, OTpt, am, mir, OTug#1, cols#80, it#8, lines#24, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, use=adm+sgr, # (adm20: removed obsolete ":kn#7:" -- esr) adm20|lear siegler adm20, OTbs, am, cols#80, it#8, lines#24, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, sgr0=\E(, smso=\E), adm21|lear siegler adm21, xmc#1, bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, use=adm3a, # (adm22: ":em=:" was an obvious typo for ":ei=:"; also, # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; # removed bogus-looking \200 from before . -- esr) adm22|lsi adm22, OTbs, am, cols#80, lines#24, bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), # ADM 31 DIP Switches # # This information comes from two versions of the manual for the # Lear-Siegler ADM 31. # # Main board: # rear of case # +-||||-------------------------------------+ # + S1S2 ||S + # + ||3 + # + + # + ||S + # + ||4 + # + + # + + # + + # + + # + + # +-+ +-+ # + + # + S5 S6 S7 + # + == == == + # +----------------------------------------------+ # front of case (keyboard) # # S1 - Data Rate - Modem # S2 - Data Rate - Printer # ------------------------ # Data Rate Setting # ------------------- # 50 0 0 0 0 # 75 1 0 0 0 # 110 0 1 0 0 # 134.5 1 1 0 0 # 150 0 0 1 0 # 300 1 0 1 0 # 600 0 1 1 0 # 1200 1 1 1 0 # 1800 0 0 0 1 # 2000 1 0 0 1 # 2400 0 1 0 1 # 3600 1 1 0 1 # 4800 0 0 1 1 # 7200 1 0 1 1 # 9600 0 1 1 1 # x 1 1 1 1 # # S3 - Interface/Printer/Attributes # --------------------------------- # Printer Busy Control # sw1 sw2 sw3 # --------------- # off off off Busy not active, CD disabled # off off on Busy not active, CD enabled # off on off Busy active on J5-20, CD disabled # on off off Busy active on J5-19, CD disabled - Factory Set. # on off on Busy active on J5-19, CD enabled # # sw4 Used in conjuction with S4 for comm interface control - Fact 0 # # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 # # sw6 ON enables printer BUSY active LOW - Factory Setting # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses # # sw7 ON - steady cursor - Factory Setting # OFF - blinking cursor # # sw8 ON causes selected attribute character to be displayed # OFF causes SPACE to be displayed instead - Factory Setting # # S4 - Interface # -------------- # Modem Interface # S3 S4 S4 S4 S4 # sw4 sw1 sw2 sw3 sw4 # --------------------------- # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and # Current Loop disabled - Factory Setting # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect # disabled # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and # Current Loop Disabled # # sw5 ON disables dot stretching mode - Factory Setting # OFF enables dot stretching mode # sw6 ON enables blanking function # OFF enables underline function - Factory Setting # sw7 ON causes NULLS to be displayed as NULLS # OFF causes NULLS to be displayed as SPACES - Factory Setting # # S5 - Word Structure # ------------------- # sw1 ON enables BREAK key - Factory Setting # OFF disables BREAK key # sw2 ON selects 50Hz monitor refresh rate # OFF selects 60Hz monitor refresh rate - Factory Setting # # Modem Port Selection # sw3 sw4 sw5 # --------------- # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit # # sw6 ON sends bit 8 a 1 (mark) # OFF sends bit 8 as 0 (space) - Factory Setting # sw7 ON selects Block Mode # OFF selects Conversation Mode - Factory Setting # sw8 ON selects Full Duplex operation # OFF selects Half Duplex operation - Factory Setting # # S6 - Printer # ------------ # sw1, sw2, sw6, sw7 Reserved - Factory 0 # # Printer Port Selection # same as Modem above, bit 8 (when 8 DATA bits) is always = 0 # # sw8 ON enables Printer Port # OFF disables Printer Port - Factory Setting # # S7 - Polling Address # -------------------- # sw1-7 Establish ASCII character which designates terminal polling address # ON = logic 0 # OFF = logic 1 - Factory Setting # sw8 ON enables Polling Option # OFF disables Polling Option - Factory Setting # # # On some older adm31s, S4 does not exist, and S5-sw6 is not defined. # # This adm31 entry uses underline as the standout mode. # If the adm31 gives you trouble with standout mode, check the DIP switch in # position 6, bank @c11, 25% from back end of the circuit board. Should be # OFF. If there is no such switch, you have an old adm31 and must use oadm31. # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) adm31|lsi adm31 with sw6 set for underline mode, OTbs, am, mir, cols#80, lines#24, bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, adm31-old|o31|old adm31, rmul@, smso=\EG4, smul@, use=adm31, # LSI ADM-36 from Col. George L. Sicherman via BRL adm36|LSI ADM36, OTbs, OTpt, OTkn#4, if=/usr/share/tabset/vt100, is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100, # (adm42: removed obsolete ":ma=^K^P:" -- esr) adm42|lsi adm42, OTbs, am, cols#80, lines#24, bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, smir=\Eq, smul@, use=adm+sgr, # The following termcap for the Lear Siegler ADM-42 leaves the # "system line" at the bottom of the screen blank (for those who # find it distracting otherwise) adm42-ns|lsi adm-42 with no system line, cbt=\EI\EF \011, clear=\E;\EF \011, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, smir=\Eq\EF \011, use=adm42, # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. # The insert mode of this terminal is commented out because it's broken for our # purposes in that it will shift the position of every character on the page, # not just the cursor line! # From: Michael Driscoll 10 July 1996 adm1178|1178|lsi adm1178, am, cols#80, lines#24, xmc#1, bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\E), smso=\EG4, smul=\EG1, #### Prime # # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings # on 14 Dec 1992 and lightly edited by esr. # Prime merged with ComputerVision in the late 1980s; you can reach them at: # # ComputerVision Services # 500 Old Connecticut Path # Framingham, Mass. # # Standout mode is dim reverse-video. pt100|pt200|wren|fenix|prime pt100/pt200, am, bw, mir, msgr, cols#80, it#8, lines#24, cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, cols#132, cup=\E[%i%p1%d;%p2%dH, use=pt100, pt250|Prime PT250, rmso@, smso@, use=pt100, pt250w|Prime PT250 in 132-column mode, rmso@, smso@, use=pt100w, #### Qume (qvt) # # Qume, Inc. # 3475-A North 1st Street # San Jose CA 95134 # Vox: (800)-457-4447 # Fax: (408)-473-1510 # Net: josed@techsupp.wyse.com (Jose D'Oliveira) # # Qume was bought by Wyse, but still (as of early 1995) has its own support # group and production division. # # Discontinued Qume models: # # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ # built to replace them, and a qvt119+ which was a 101+ with available wide # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations # and an ANSI-compatible qvt203 that replaced it. Qume started producing # ANSI-compatible terminals with the qvt323 and qvt61. # # Current Qume models (as of February 1995): # # All current Qume terminals have ANSI-compatible operation modes. # Qume is still producing the qvt62, which features emulations for other # popular lines such as ADDS, and dual-host capabilities. The qvt82 is # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal # with many emulations including Wyse370, Wyse 325, etc. Their newest # model is the qvt520, which is vt420-compatible. # # There are some ancient printing Qume terminals under `Daisy Wheel Printers' # # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its # setup mode. Shift-s should be a configuration save to NVRAM. qvt101|qvt108|qume qvt 101 and QVT 108, xmc#1, use=qvt101+, # This used to have but no or . The BSD termcap # file had . I've done the safe thing and yanked # both. The is from BSD, which also claimed bold=\E( and dim=\E). # What seems to be going on here is that this entry was designed so that # the normal highlight is bold and standout is dim plus something else # (reverse-video maybe? But then, are there two sequences?) qvt101+|qvt101p|qume qvt 101 PLUS product, am, bw, hs, ul, cols#80, lines#24, xmc#0, bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, qvt102|qume qvt 102, cnorm=\E., use=qvt101, # (qvt103: added / based on init string -- esr) qvt103|qume qvt 103, am, xenl, xon, cols#80, it#8, lines#24, vt#3, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, qvt103-w|qume qvt103 132 cols, cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, am, hs, mir, msgr, cols#80, lines#24, xmc#0, bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, lines#25, use=qvt119+, qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, cols#132, is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, lines#25, use=qvt119+, qvt203|qvt203+|qume qvt 203 Plus, dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, # # Since a command is present for enabling 25 data lines, # a specific terminfo entry may be generated for the 203. # If one is desired for the QVT 119 PLUS then 25 lines must # be selected in the status line (setup line 9). # qvt203-25|QVT 203 PLUS with 25 by 80 column mode, cols#80, lines#25, is2=\E[=40h\E[?3l, use=qvt203, qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, cols#132, lines#25, rs2=\E[?3h\E[=40h, use=qvt203, #### Televideo (tvi) # # TeleVideo # 550 East Brokaw Road # PO Box 49048 95161 # San Jose CA 95112 # Vox: (408)-954-8333 # Fax: (408)-954-0623 # # # These require incredible amounts of padding. # # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer # Televideo terminals are ANSI and PC-ANSI compatible. tvi803|televideo 803, clear=\E*$<10>, use=tvi950, # Vanilla tvi910 -- W. Gish 10/29/86 # Switch settings are: # # S1 1 2 3 4 # D D D D 9600 # D D D U 50 # D D U D 75 # D D U U 110 # D U D D 135 # D U D U 150 # D U U D 300 # D U U U 600 # U D D D 1200 # U D D U 1800 # U D U D 2400 # U D U U 3600 # U U D D 4800 # U U D U 7200 # U U U D 9600 # U U U U 19200 # # S1 5 6 7 8 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored) # U D X U 7N2 # U U D D 7O1 # U U D U 7O2 # U U U D 7E1 # U U U U 7E2 # D D X D 8N1 # D D X U 8N2 # D U D D 8O1 # D U U U 8E2 # # S1 9 Autowrap # U on # D off # # S1 10 CR/LF # U do CR/LF when CR received # D do CR when CR received # # S2 1 Mode # U block # D conversational # # S2 2 Duplex # U half # D full # # S2 3 Hertz # U 50 # D 60 # # S2 4 Edit mode # U local # D duplex # # S2 5 Cursor type # U underline # D block # # S2 6 Cursor down key # U send ^J # D send ^V # # S2 7 Screen colour # U green on black # D black on green # # S2 8 DSR status (pin 6) # U disconnected # D connected # # S2 9 DCD status (pin 8) # U disconnected # D duplex # # S2 10 DTR status (pin 20) # U disconnected # D duplex # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added , , , # , , , , from SCO entry -- esr) tvi910|televideo model 910, OTbs, am, msgr, cols#80, it#8, lines#24, xmc#1, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, vpa=\E[%p1%{32}%+%c, use=adm+sgr, # From: Alan R. Rogers # as subsequently hacked over by someone at SCO # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) # # Here are the 910+'s DIP switches (U = up, D = down, X = don't care): # # S1 1 2 3 4: # D D D D 9600 D D D U 50 D D U D 75 D D U U 110 # D U D D 135 D U D U 150 D U U D 300 D U U U 600 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 # # S1 5 6 7 8: # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 # D U D D 8O1 D U U U 8E2 # # S1 9 Autowrap (U = on, D = off) # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) # S2 1 Mode (U = block, D = conversational) # S2 2 Duplex (U = half, D = full) # S2 3 Hertz (U = 50, D = 60) # S2 4 Edit mode (U = local, D = duplex) # S2 5 Cursor type (U = underline, D = block) # S2 6 Cursor down key (U = send ^J, D = send ^V) # S2 7 Screen colour (U = green on black, D = black on green) # S2 8 DSR status (pin 6) (U = disconnected, D = connected) # S2 9 DCD status (pin 8) (U = disconnected, D = connected) # S2 10 DTR status (pin 20) (U = disconnected, D = connected) # tvi910+|televideo 910+, dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, ll=\E=7\s, use=tvi910, # (tvi912: removed obsolete ":ma=^K^P^L :", added and # from BRL entry -- esr) tvi912|tvi914|tvi920|old televideo 912/914/920, OTbs, OTpt, am, msgr, cols#80, it#8, lines#24, xmc#1, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, tbc=\E3, # We got some new tvi912c terminals that act really weird on the regular # termcap, so one of our gurus worked this up. Seems that cursor # addressing is broken. tvi912cc|tvi912 at cowell college, cup@, use=tvi912c, # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C # From: Benjamin C. W. Sittler # # Someone has put a scanned copy of the manual online at: # http://vt100.net/televideo/912b-om/ # # These terminals were produced ca. 1979, and had a 12" monochrome # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit # ASCII, and were generally similar to adm3a but with attributes # (including some with magic cookies), fancy half-duplex mode, and # different bugs. # # Some operations reqire truly incredible amounts of padding. The # insert_line () and delete_line () operations in particular # are so slow as to be nearly unusable. # # There may or may not have been a separate, earlier series of 912/920 # terminals (without the "B" and "C" suffix); I have never seen one, # and the manual only describes the "B" and "C" series. The 912 and 920 # are quite distinct from the 914 and 924, which were much nicer non- # magic-cookie terminals similar to the 950. # # This is a new description for the following TeleVideo terminals, # distinguished chiefly by their keyboards: # # TVI-912B - very odd layout, no function keys (84 keys) # TVI-920B - typewriter layout, no function keys (103 keys) # TVI-912C - very odd layout, function keys F1-F11 (82 keys) # TVI-920C - typewriter layout, function keys F1-F11 (101 keys) # # To choose a setting for the TERM variable, start with the model: # # Model || base name # ----------||----------- # TVI-912B || tvi912b # TVI-912C || tvi912c # TVI-920B || tvi920b # TVI-920C || tvi920c # # Then add a suffix from the following table describing installed options # and how you'd like to use the terminal: # # Use Video | Second | Visual | Magic | Page || feature # Attributes | Page | Bell | Cookies | Print || suffix # ------------|--------|--------|---------|-------||--------- # No | No | N/A | N/A | No || -unk # No | No | N/A | N/A | Yes || -p # No | Yes | No | N/A | No || -2p-unk # No | Yes | No | N/A | Yes || -2p-p # No | Yes | Yes | N/A | No || -vb-unk # No | Yes | Yes | N/A | Yes || -vb-p # Yes | No | N/A | No | N/A || # Yes | No | N/A | Yes | N/A || -mc # Yes | Yes | No | No | N/A || -2p # Yes | Yes | No | Yes | N/A || -2p-mc # Yes | Yes | Yes | No | N/A || -vb # Yes | Yes | Yes | Yes | N/A || -vb-mc # # So e.g. a model 920 C with second page memory option, visual bell # and no magic cookies would be tvi920c-vb; a model 912 B without the # second page memory option and using magic cookies would be # tvi912b-mc # # PADDING # # At 9600 baud, the terminal is prone to overflow its input buffer # during complex operations (insert/delete # character/line/screen/page), and it does not signal this over the # RS232 cable. The typical symptom of an overrun is that the terminal # starts beeping, and output becomes garbled. # # The padding delays in this terminfo were derived using tack(1) # running on a Linux box connected to a TVI-920C with a later-model # (A49C1-style) ROM running at 9600 baud, so your mileage may # vary. The numbers below seem to give the terminal enough time so # that it doesn't overflow its input buffer and start losing # characters. # # KEYS # # If you want to use the FUNCT key on a tvi912[bc], use the # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from # the following table (these also work on the 920 series): # # Unshifted Function Keys: # # Key | capname|| Equivalent # -----|--------||------------ # F1 | || FUNCT + @ # F2 | || FUNCT + A # F3 | || FUNCT + B # F4 | || FUNCT + C # F5 | || FUNCT + D # F6 | || FUNCT + E # F7 | || FUNCT + F # F8 | || FUNCT + G # F9 | || FUNCT + H # F10 | || FUNCT + I # F11 | || FUNCT + J # # Shifted Function Keys: # # SHIFT + Key | capname|| Equivalent # -------------|--------||------------ # SHIFT + F1 | || FUNCT + ` # SHIFT + F2 | || FUNCT + a # SHIFT + F3 | || FUNCT + b # SHIFT + F4 | || FUNCT + c # SHIFT + F5 | || FUNCT + d # SHIFT + F6 | || FUNCT + e # SHIFT + F7 | || FUNCT + f # SHIFT + F8 | || FUNCT + g # SHIFT + F9 | || FUNCT + h # SHIFT + F10 | || FUNCT + i # SHIFT + F11 | || FUNCT + j # # PORTS AND SWITCH SETTINGS # # Here are the switch settings for the TVI-912B/TVI-920B and # TVI-912C/TVI-920C: # # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: # 2: 9600 3: 4800 4: 2400 5: 1200 # 6: 600 7: 300 8: 150 9: 75 # 10: 110 # # S2 UART/Terminal options: # Up Down # 1: Not used Not allowed # 2: Alternate character set Standard character set # 3: Full duplex Half duplex # 4: 50 Hz refresh 60 Hz refresh # 5: No parity Send parity # 6: 2 stop bits 1 stop bit # 7: 8 data bits 7 data bits # 8: Not used Not allowed on Rev E or lower # 9: Even parity Odd parity # 10: Steady cursor Blinking cursor # (On Rev E or lower, use W25 instead of switch 10.) # # S5 UART/Terminal options: # Open Closed # 1: P3-6 Not connected DSR received on P3-6 # 2: P3-8 Not connected DCD received on P3-8 # # 3 Open, 4 Open: P3-20 Not connected # 3 Open, 4 Closed: DTR on when terminal is on # 3 Closed, 4 Open: DTR is connected to RTS # 3 Closed, 4 Closed: Not allowed # # 5 Closed: HDX printer (hardware control) Rev. K with extension port off, # all data transmitted out of the modem port (P3) will also be # transmitted out of the printer port (P4). # # 6 Open, 7 Open: Not allowed # 6 Open, 7 Closed: 20ma current loop input # 6 Closed, 7 Open: RS232 input # 6 Closed, 7 Closed: Not allowed # # Jumper options: # If the jumper is installed, the effect will occur (the next time the terminal # is switched on). # # S4/W31: Enables automatic LF upon receipt of CR from # remote or keyboard. # S4/W32: Enables transmission of EOT at the end of Send. If not # installed, a carriage return is sent. # S4/W33: Disables automatic carriage return in column 80. # S4/W34: Selects Page Print Mode as initial condition. If not # installed, Extension Mode is selected. # # NON-STANDARD CAPABILITIES # # Sending or returns a cursor position report in the format # YX\r, where Y and X are as in . This format is described in # and , but it's not clear how one should write an # appropriate scanf string, since we need to subtract %' ' from the # character after reading it. The capability is used by tack(1) # to synchronize during padding tests, and seems to work for that # purpose. # # This description also includes the obsolete termcap capabilities # has_hardware_tabs () and backspaces_with_bs (). # # FEATURES NOT YET DESCRIBED IN THIS TERMINFO # # The FUNCT modifier actually works with every normal key by sending # ^AX\r, where X is the sequence normally sent by that key. This is a # sort of meta key not currently describable in terminfo. # # There are quite a few other keys (especially on the 920 models,) but # they are for the most part only useful in block mode. # # These terminals have lots of forms manipulation features, mainly # useful in block mode, including "clear X to nulls" (vs. "clear X to # spaces"; nulls are sentinels for "send X" operations); "send X" # operations for uploading all or part of the screen; and block-mode # editing keys (they don't send escape sequences, but manipulate video # memory directly). Block mode is used for local editing, and protect # mode (in conjunction with the "write protect" attribute, # a.k.a. half-intensity outside of protect mode) is used to control # which parts of the screen are edited/sent/printed (by ). # # There are at least two major families of ROM, "early" and # A49B1/A49C1; the major difference seems to be that the latter ROMs # support a few extra escape sequences for manipulating the off-screen # memory page, and for sending whole pages back to the host (mainly # useful in block mode.) The descriptions in this file don't use any # of those sequences: set cursor position including page (\E-PYX, # where P is \s for page 0 and ! for page 1 [actually only the LSB of # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are # as in ); read cursor position (\E/), which is analogous to # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX # are as in , and some "send page" features mainly useful for # forms manipulation. # # The keyboard enable (\E") and disable (\E#) sequences are unused, # except that a terminal reset () enables the keyboard. # # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) # enabled in , but auto-flip is very jarring so we don't use it. # # BUGS # # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed # sequences (I infer that in some TeleVideo terminal they may invert # and uninvert the display) so the sequence given here is a # cheesy page-flip instead. # # The back_tab () sequence (\EI) doesn't work according to # tack(1), so it is not included in the descriptions below. # # It's not clear whether auto_left_margin () flag should be set # for these terminals; tack says yes, so it is set here, but this # differs from other descriptions I've seen. # # Extension print mode () echoes all characters to the printer # port [in addition to displaying them] except for the page print mode # sequence (); this is a slight violation of the terminfo # definition for but I don't expect it to cause problems. We # reset to page print mode in since it may have been enabled # accidentally. # # The descriptions with plus signs (+) are building blocks. tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), OTbs, OTpt, am, bw, cols#80, it#8, lines#24, bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, u7=\E?, u8=%c%c\r, u9=\E?, # This isn't included in the basic capabilities because it is # typically unusable in combination with the full range of video # attributes, since the magic cookie attributes turn into ASCII # control characters, and the half-intensity ("protected") attribute # converts all affected characters to spaces. tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, mc0=\EP, # This uses half-intensity mode () for standout (), and # exposes no other attributes (half-intensity is the only attribute # that does not generate a magic cookie.) tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, msgr, dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, smso=\E), # Full magic-cookie attribute support, with half-intensity reverse # video for standout. Note that we add a space in the sequence # to give a consistent magic-cookie count. Also note that uses # backspacing (in the TVI-supported order) to apply all requested # attributes with only a single magic cookie. tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, xmc#1, blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, rmul=\Em, sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, # This uses the second page memory option to save & restore screen # contents. If your terminal is missing the option, this description # should still work, but that has not been tested. tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, # This simulates flashing by briefly toggling to the other page # (kludge!) tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, bel=\EK$<100>\EK, use=tvi912b+2p, # Function keys ( .. are shifted .. ) tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, # Combinations of the basic building blocks tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), use=tvi912b+2p, use=tvi912b-unk, tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), use=tvi912b+vb, use=tvi912b-unk, tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), use=tvi912b+printer, use=tvi912b-unk, tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), use=tvi912b+dim, use=tvi912b-unk, tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), use=tvi912b+mc, use=tvi912b-unk, tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), use=tvi920b+fn, use=tvi912b-unk, tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, # Televideo 921 and variants # From: Tim Theisen 22 Sept 1995 # (tvi921: removed :ko=bt: before translation, I see no backtab cap; # also added empty to suppress tic warning -- esr) tvi921|televideo model 921 with sysline same as page & real vi function, OTbs, OTpt, am, hs, xenl, xhp, cols#80, lines#24, xmc#0, acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, # without the beeper # (tvi92B: removed :ko=bt: before translation, I see no backtab cap; # also added empty to suppress tic warning -- esr) tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, am, hs, xenl, xhp, cols#80, lines#24, xmc#0, acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, dl1=\ER$<2*/>, il1=\EE$<2*/>, is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, kil1=\EE$<2*/>, use=tvi92B, # (tvi924: This used to have , . I put the new strings # in from a BSD termcap file because it looks like they do something the # old ones skip -- esr) tvi924|televideo tvi924, am, bw, hs, in, mir, msgr, xenl, xon, cols#80, it#8, lines#24, wsl#80, xmc#0, bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, use=adm+sgr, # TVI925 DIP switches. In each of these, D = Down and U = Up, # # Here are the settings for the external (baud) switches (S1): # # Position Baud # 7 8 9 10 [Printer] # 1 2 3 4 [Main RS232] # ----------------------------------------------------- # D D D D 9600 # D D D U 50 # D D U D 75 # D D U U 110 # D U D D 135 # D U D U 150 # D U U D 300 # D U U U 600 # U D D D 1200 # U D D U 1800 # U D U D 2400 # U D U U 3600 # U U D D 4800 # U U D U 7200 # U U U D 9600 # U U U U 19200 # # # Settings for word length and stop-bits (S1) # # Position Description # 5 6 # --------------------------- # U - 7-bit word # D - 8-bit word # - U 2 stop bits # - D 1 stop bit # # # S2 (external) settings # # Position Up Dn Description # -------------------------------------------- # 1 X Local edit # X Duplex edit (transmit editing keys) # -------------------------------------------- # 2 X 912/920 emulation # X 925 # -------------------------------------------- # 3 X # 4 X No parity # 5 X # -------------------------------------------- # 3 X # 4 X Odd parity # 5 X # -------------------------------------------- # 3 X # 4 X Even parity # 5 X # -------------------------------------------- # 3 X # 4 X Mark parity # 5 X # -------------------------------------------- # 3 X # 4 X Space parity # 5 X # -------------------------------------------- # 6 X White on black display # X Black on white display # -------------------------------------------- # 7 X Half Duplex # 8 X # -------------------------------------------- # 7 X Full Duplex # 8 X # -------------------------------------------- # 7 X Block mode # 8 X # -------------------------------------------- # 9 X 50 Hz # X 60 Hz # -------------------------------------------- # 10 X CR/LF (Auto LF) # X CR only # # S3 (internal switch) settings: # # Position Up Dn Description # -------------------------------------------- # 1 X Keyclick off # X Keyclick on # -------------------------------------------- # 2 X English # 3 X # -------------------------------------------- # 2 X German # 3 X # -------------------------------------------- # 2 X French # 3 X # -------------------------------------------- # 2 X Spanish # 3 X # -------------------------------------------- # 4 X Blinking block cursor # 5 X # -------------------------------------------- # 4 X Blinking underline cursor # 5 X # -------------------------------------------- # 4 X Steady block cursor # 5 X # -------------------------------------------- # 4 X Steady underline cursor # 5 X # -------------------------------------------- # 6 X Screen blanking timer (ON) # X Screen blanking timer (OFF) # -------------------------------------------- # 7 X Page attributes # X Line attributes # -------------------------------------------- # 8 X DCD disconnected # X DCD connected # -------------------------------------------- # 9 X DSR disconnected # X DSR connected # -------------------------------------------- # 10 X DTR Disconnected # X DTR connected # -------------------------------------------- # # (tvi925: BSD has . I got and from there -- esr) tvi925|televideo 925, OTbs, am, bw, hs, ul, cols#80, lines#24, xmc#1, bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, tsl=\Eh\Ef, use=adm+sgr, # TeleVideo 925 from Mitch Bradley via BRL # to avoid "magic cookie" standout glitch: tvi925-hi|TeleVideo Model 925 with half intensity standout mode, xmc@, kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, # From: Todd Litwin 28 May 1993 # Originally Tim Curry, Univ. of Central Fla., 5/21/82 # for additional capabilities, # The following tvi descriptions from B:pjphar and virus!mike # is for all 950s. It sets the following attributes: # full duplex (\EDF) write protect off (\E() # conversation mode (\EC) graphics mode off (\E%) # white on black (\Ed) auto page flip off (\Ew) # turn off status line (\Eg) clear status line (\Ef\r) # normal video (\E0) monitor mode off (\EX or \Eu) # edit mode (\Er) load blank char to space (\Ee\040) # line edit mode (\EO) enable buffer control (^O) # protect mode off (\E\047) duplex edit keys (\El) # program unshifted send key to send line all (\E016) # program shifted send key to send line unprotected (\E004) # set the following to nulls: # field delimiter (\Ex0\200\200) # line delimiter (\Ex1\200\200) # start-protected field delimiter (\Ex2\200\200) # end-protected field delimiter (\Ex3\200\200) # set end of text delimiter to carriage return/null (\Ex4\r\200) # # TVI 950 Switch Setting Reference Charts # # TABLE 1: # # S1 1 2 3 4 5 6 7 8 9 10 # +-----------------------+-----+-----+-----------------------+ # | Computer Baud Rate |Data |Stop | Printer Baud Rate | # | |Bits |Bits | | # +------+-----------------------+-----+-----+-----------------------+ # | Up | See | 7 | 2 | See | # +------+-----------------------+-----+-----+-----------------------+ # | Down | TABLE 2 | 8 | 1 | TABLE 2 | # +------+-----------------------+-----+-----+-----------------------+ # # # S2 1 2 3 4 5 6 7 8 9 10 # +-----+-----+-----------------+-----+-----------+-----+-----+ # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| # +------+-----+-----+-----------------+-----+-----------+-----+-----+ # | Up | Dplx|Blink| See |GonBk| See | 60 | Off | # +------+-----+-----+-----------------+-----+-----------+-----+-----+ # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | # +------+-----+-----+-----------------+-----+-----------+-----+-----+ # # TABLE 2: # # +-----------+-----+-----+-----+-----+-----------+ # | Display | 1 | 2 | 3 | 4 | Baud | # +-----------+-----+-----+-----+-----+ | # | Printer | 7 | 8 | 9 | 10 | Rate | # +-----------+-----+-----+-----+-----+-----------+ # | D | D | D | D | 9600 | # | U | D | D | D | 50 | # | D | U | D | D | 75 | # | U | U | D | D | 110 | # | D | D | U | D | 135 | # | U | D | U | D | 150 | # | D | U | U | D | 300 | # | U | U | U | D | 600 | # | D | D | D | U | 1200 | # | U | D | D | U | 1800 | # | D | U | D | U | 2400 | # | U | U | D | U | 3600 | # | D | D | U | U | 4800 | # | U | D | U | U | 7200 | # | D | U | U | U | 9600 | # | U | U | U | U | 19200 | # +-----+-----+-----+-----+-----------+ # # TABLE 3: # +-----+-----+-----+-----------+ # | 3 | 4 | 5 | Parity | # +-----+-----+-----+-----------+ # | X | X | D | None | # | D | D | U | Odd | # | D | U | U | Even | # | U | D | U | Mark | # | U | U | U | Space | # +-----+-----+-----+-----------+ # X = don't care # # CHART: # +-----+-----+-----------------+ # | 7 | 8 | Communication | # +-----+-----+-----------------+ # | D | D | Half Duplex | # | D | U | Full Duplex | # | U | D | Block | # | U | U | Local | # +-----+-----+-----------------+ # # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". # I also inserted and ; the :ko: string indicated that # should be present and all tvi native modes use the same string for this. # Finally, note that BSD has cud1=^V. -- esr) tvi950|televideo 950, OTbs, am, hs, mir, msgr, xenl, xon, cols#80, it#8, lines#24, xmc#1, acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, # # is for 950 with two pages adds the following: # set 48 line page (\E\\2) # place cursor at page 0, line 24, column 1 (\E-07 ) # set local (no send) edit keys (\Ek) # # two page 950 adds the following: # when entering ex, set 24 line page (\E\\1) # when exiting ex, reset 48 line page (\E\\2) # place cursor at 0,24,1 (\E-07 ) # set duplex (send) edit keys (\El) when entering vi # set local (no send) edit keys (\Ek) when exiting vi # tvi950-2p|televideo950 w/2 pages, is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, smkx=\El, use=tvi950, # # is for 950 with four pages adds the following: # set 96 line page (\E\\3) # place cursor at page 0, line 24, column 1 (\E-07 ) # # four page 950 adds the following: # when entering ex, set 24 line page (\E\\1) # when exiting ex, reset 96 line page (\E\\3) # place cursor at 0,24,1 (\E-07 ) # tvi950-4p|televideo950 w/4 pages, is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, smkx=\El, use=tvi950, # # for reverse video 950 changes the following: # set reverse video (\Ed) # # set vb accordingly (\Ed ...delay... \Eb) # tvi950-rv|televideo950 rev video, flash=\Ed$<200/>\Eb, is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, use=tvi950, # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv tvi950-rv-2p|televideo950 rev video w/2 pages, flash=\Ed$<200/>\Eb, is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, smkx=\El, use=tvi950, # tvi950-rv uses the appropriate entries from 950-4p and 950-rv tvi950-rv-4p|televideo950 rev video w/4 pages, flash=\Ed$<200/>\Eb, is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, smkx=\El, use=tvi950, # From: Andreas Stolcke # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in # the :rs: string, inserted the implied by the termcap :ko: string. Note # the :ko: string had :cl: in it, which means that one of the original # , had to be wrong; set because that's what # the 950 has. Finally, corrected the string to match the 950 and what # ko implies -- esr) # If the BSD termcap file was right, would # also work. tvi955|televideo 955, OTbs, mc5i, msgr@, it#8, xmc@, acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, rmam=\E[=7l, rmxon=^N, rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, use=tvi950, tvi955-w|955-w|televideo955 w/132 cols, cols#132, is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, # use half-intensity as normal mode, full intensity as tvi955-hb|955-hb|televideo955 half-bright, bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, sgr0=\EG0\E[=5h, use=tvi955, # From: Humberto Appleton , 880521 UT Austin # (tvi970: removed ":sg#0:"; removed =\E[m, =\E[m; # added ////// from BRL. # According to BRL we could have =\E>, =\E= but I'm not sure what # it does to the function keys. I deduced /. # also added empty to suppress tic warning, -- esr) tvi970|televideo 970, OTbs, OTpt, am, da, db, mir, msgr, cols#80, it#8, lines#24, acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=\E(B, smam=\E[?7l, smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, tvi970-vb|televideo 970 with visual bell, flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, use=tvi970, tvi970-2p|televideo 970 with using 2 pages of memory, rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, use=tvi970, # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars # per line (rather than 40), Esc K chooses the normal character set. Not sure # padding is needed, but adapted from the tvi920c termcap. The and # strings are klutzy, but at least use no screen space. # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew , # its absence means =\Ev isn't safe to use. -- esr) # From: Gene Rochlin 9/19/84. # The ////, and caps are from BRL, which says: # F1 and F2 should be programmed as ^A and ^B; required for UNIFY. tvipt|televideo personal terminal, OTbs, am, cols#80, lines#24, cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, # From: Nathan Peterson , 03 Sep 1996 tvi9065|televideo 9065, am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, wnum#0, wsl#30, acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, ip=$<3>, is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, pfkey=\E|%p1%{48}%+%c3%p2%s\031, pfloc=\E|%p1%{48}%+%c2%p2%s\031, pfx=\E|%p1%{48}%+%c1%p2%s\031, pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, rep=\E[%p2%db%p1%c, rev=\EG4, rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;, sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, #### Visual (vi) # # In September 1993, Visual Technology of Westboro, Massachusetts, # merged with White Pine Software of Nashua, New Hampshire. # # White Pine Software may be contacted at +1 603/886-9050. # Or visit White Pine on the World Wide Web at URL http://www.wpine.com. # # Visual 50 from Beau Shekita, BTL-Whippany # Recently I hacked together the following termcap for Visual # Technology's Visual 50 terminal. It's a slight modification of # the vt52 termcap. # It's intended to run when the Visual 50 is in vt52 emulation mode # (I know what you're thinking; if it's emulating a vt52, then why # another termcap? Well, it turns out that the Visual 50 can handle # and db(?) among other things, which the vt52 can't) # The termcap works OK for the most part. The only problem is on # character inserts. The whole line gets painfully redrawn for each # character typed. Any suggestions? # Beau's entry is combined with the vi50 entry from University of Wisconsin. # Note especially the function. - are really l4-l6 in # disguise; - are really l1-l3. vi50|visual 50, OTbs, OTpt, am, da, db, msgr, cols#80, it#8, lines#24, OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, # this one was BSD & SCO's vi50 vi50adm|visual 50 in adm3a mode, am, msgr, cols#80, it#8, lines#24, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, rmso=\ET, smso=\EU, # From: Jeff Siegal vi55|Visual 55, OTbs, am, mir, msgr, cols#80, it#8, lines#24, clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, smir=\Ea, smso=\EU, # Visual 200 from BRL # The following switch settings are assumed for normal operation: # FULL_DUPLEX SCROLL CR # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE # Other switches may be set for operator convenience or communication # requirements. # Character insertion is kludged in order to get around the "beep" misfeature. # (This cap is commented out because / is more efficient -- esr) # Supposedly "4*" delays should be used for , , , , # and strings, but we seem to get along fine without them. vi200|visual 200, OTbs, OTpt, am, mir, msgr, OTkn#10, cols#80, it#8, lines#24, acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG, rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg, # The older Visuals didn't come with function keys. This entry uses # and so that the keypad keys can be used as function keys. # If your version of vi doesn't support function keys you may want # to use vi200-f. vi200-f|visual 200 no function keys, is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, use=vi200, vi200-rv|visual 200 reverse video, cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, # the function keys are programmable but we don't reprogram them to their # default values with because programming them is very verbose. maybe # an initialization file should be made for the 300 and they could be stuck # in it. # (vi300: added / based on init string -- esr) vi300|visual 300 ansi x3.64, am, bw, mir, xenl, cols#80, lines#24, bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=^J, is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smso=\E[1m, smul=\E[4m, # some of the vi300s have older firmware that has the command # sequence for setting editing extent reversed. vi300-old|visual 300 with old firmware (set edit extent reversed), is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300, # Visual 500 prototype entry from University of Wisconsin. # The best place to look for the escape sequences is page A1-1 of the # Visual 500 manual. The initialization sequence given here may be # overkill, but it does leave out some of the initializations which can # be done with the menus in set-up mode. # The :xp: line below is so that emacs can understand the padding requirements # of this slow terminal. :xp: is 10 time the padding factor. # (vi500: removed unknown :xp#4: termcap; # also added empty to suppress tic warning -- esr) vi500|visual 500, am, mir, msgr, cols#80, it#8, lines#33, acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, ind=^J, is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, # The visual 550 is a visual 300 with tektronix graphics, # and with 33 lines. clear screen is modified here to # also clear the graphics. vi550|visual 550 ansi x3.64, lines#33, clear=\030\E[H\E[2J, use=vi300, vi603|visual603|visual 603, hs, mir, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, use=vt100, #### Wyse (wy) # # Wyse Technology # 3471 North First Street # San Jose, CA 95134 # Vox: (408)-473-1200 # Fax: (408) 473-1222 # Web: http://www.wyse.com # # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the # obvious address, . They keep terminfo entries at # . # # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. # They now own the Qume and Amdek brands, too. So these are the people to # talk with about all Link, Qume, and Amdek terminals. # # These entries include a few small fixes. # I canceled the bel capacities in the vb entries. # I made two trivial syntax fixes in the wyse30 entry. # I made some entries relative to adm+sgr. # # # Note: The wyse75, wyse85, and wyse99 have been discontinued. # Although the Wyse 30 can support more than one attribute # it requires magic cookies to do so. Many applications do not # function well with magic cookies. The following terminfo uses # the protect mode to support one attribute (dim) without cookies. # If more than one attribute is needed then the wy30-mc terminfo # should be used. # wy30|wyse30|Wyse 30, am, bw, hs, mc5i, mir, msgr, xon, cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, smso=\E`7\E), tbc=\E0, tsl=\EF, # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # # (wy30-mc: added to suppress tic warning --esr) wy30-mc|wyse30-mc|wyse 30 with magic cookies, msgr@, ma@, xmc#1, blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, smso=\EG4, use=wy30, use=adm+sgr, # The mandatory pause used by does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> wy30-vb|wyse30-vb|wyse 30 visible bell, bel@, use=wy30, # # The Wyse 50 can support one attribute (e.g. Dim, Inverse, # Normal) without magic cookies by using the protect mode. # The following description uses this feature, but when more # than one attribute is put on the screen at once, all attributes # will be changed to be the same as the last attribute given. # The Wyse 50 can support more attributes when used with magic # cookies. The wy50-mc terminal description uses magic cookies # to correctly handle multiple attributes on a screen. # wy50|wyse50|Wyse 50, am, bw, hs, mc5i, mir, msgr, xon, cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, smso=\E`6\E), tbc=\E0, tsl=\EF, # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # # The mandatory pause used by flash does not work with some # older versions of terminfo. If you see this effect then # unset and delete the / from the delay. # i.e. change $<100/> to $<100> # (wy50-mc: added to suppress tic warning --esr) wy50-mc|wyse50-mc|wyse 50 with magic cookies, msgr@, ma@, xmc#1, blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, smso=\EGt, use=wy50, use=adm+sgr, wy50-vb|wyse50-vb|wyse 50 visible bell, bel@, use=wy50, wy50-w|wyse50-w|wyse 50 132-column, cols#132, lw#7, nlab#16, wsl#97, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50, wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, bel@, use=wy50-w, # # The Wyse 350 is a Wyse 50 with color. # Unfortunately this means that it has magic cookies. # The color attributes are designed to overlap the reverse, dim and # underline attributes. This is nice for monochrome applications # because you can make underline stuff green (or any other color) # but for true color applications it's not so hot because you cannot # mix color with reverse, dim or underline. # To further complicate things one of the attributes must be # black (either the foreground or the background). In reverse video # the background changes color with black letters. In normal video # the foreground changes colors on a black background. # This terminfo uses some of the more advanced features of curses # to display both color and blink. In the final analysis I am not # sure that the wy350 runs better with this terminfo than it does # with the wy50 terminfo (with user adjusted colors). # # The mandatory pause used by flash does not work with # older versions of terminfo. If you see this effect then # unset xon and delete the / from the delay. # i.e. change $<100/> to $<100> # # Bug: The capability resets attributes. wy350|wyse350|Wyse 350, am, bw, hs, mc5i, mir, xon, colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, wsl#45, xmc#1, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, pfx=\Ez%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, wy350-vb|wyse350-vb|wyse 350 visible bell, bel@, use=wy350, wy350-w|wyse350-w|wyse 350 132-column, cols#132, lw#7, nlab#16, wsl#97, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350, wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, bel@, use=wy350-w, # # This terminfo description is untested. # The wyse100 emulates an adm31, so the adm31 entry should work. # wy100|wyse 100, hs, mir, cols#80, lines#24, xmc#1, bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, # # The Wyse 120/150 has most of the features of the Wyse 60. # This terminal does not need padding up to 9600 baud! # should be set but the clear screen fails when in # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear # then set . # wy120|wyse120|wy150|wyse150|Wyse 120/150, am, bw, hs, km, mc5i, mir, msgr, xon, cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, pfloc=\EZ2%p1%{63}%+%c%p2%s\177, pfx=\EZ1%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, rs3=\EwG\Ee($<100>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, tbc=\E0, tsl=\EF, use=adm+sgr, # wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, cols#132, lw#7, nlab#16, wsl#97, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, rs2=\E`;$<70>, use=wy120, # wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy120, # wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, # wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, bel@, use=wy120, # wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, bel@, use=wy120-w, # # The Wyse 60 is like the Wyse 50 but with more padding. # The reset strings are slow and the pad times very depending # on other parameters such as font loading. I have tried # to follow the following outline: # # -> set personality # -> set number of columns # -> set number of lines # -> select the proper font # -> do the initialization # -> set up display memory (2 pages) # # The Wyse 60's that have vt100 emulation are slower than the # older Wyse 60's. This change happened mid-1987. # The capabilities effected are # # The meta key is only half right. This terminal will return the # high order bit set when you hit CTRL-function_key # # It may be useful to assign two function keys with the # values \E=(\s look at old data in page 1 # \E=W, look at bottom of page 1 # where \s is a space ( ). # # Note: # The Wyse 60 runs faster when the XON/XOFF # handshake is turned off. # # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid # a bug reported by Robert Dunn, -- esr) wy60|wyse60|Wyse 60, am, bw, hs, km, mc5i, mir, msgr, cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, ip=$<3>, is1=\EcB0\EcC1, is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, pfloc=\EZ2%p1%{63}%+%c%p2%s\177, pfx=\EZ1%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, tbc=\E0, tsl=\EF, use=adm+sgr, # wy60-w|wyse60-w|wyse 60 132-column, cols#132, lw#7, nlab#16, wsl#97, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, rs2=\EeF$<150>\E`;$<150>, use=wy60, # wy60-25|wyse60-25|wyse 60 80-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<200>, use=wy60, wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, # wy60-42|wyse60-42|wyse 60 80-column 42-lines, lines#42, clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, cols#132, lw#7, nlab#16, wsl#97, clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, # wy60-43|wyse60-43|wyse 60 80-column 43-lines, lh@, lines#43, lw@, nlab@, pln@, rs3=\Ee+$<150>, use=wy60-42, wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, lh@, lines#43, lw@, nlab@, pln@, rs3=\Ee+$<150>, use=wy60-42-w, # wy60-vb|wyse60-vb|Wyse 60 visible bell, bel@, use=wy60, wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, bel@, use=wy60-w, # The Wyse-99GT looks at lot like the Wyse 60 except that it # does not have the 42/43 line mode. In the Wyse-60 the "lines" # setup parameter controls the number of lines on the screen. # For the Wyse 99GT the "lines" setup parameter controls the # number of lines in a page. The screen can display 25 lines max. # The Wyse-99GT also has personalities for the VT220 and # Tektronix 4014. But this has no bearing on the native mode. # # (msgr) should be set but the clear screen fails when in # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear # then set msgr, else use msgr@. # # u0 -> enter Tektronix mode # u1 -> exit Tektronix mode # wy99gt|wyse99gt|Wyse 99gt, msgr@, clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, u0=\E~>\E8, u1=\E[42h, use=wy60, # wy99gt-w|wyse99gt-w|wyse 99gt 132-column, cols#132, lw#7, nlab#16, wsl#97, clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt, # wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, # wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs2=\E`;$<150>, use=wy99gt-w, # wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, bel@, use=wy99gt, # wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, bel@, use=wy99gt-w, # Can't set tabs! Other bugs (ANSI mode only): # - can't redefine function keys (anyway, key redefinition in ANSI mode # is too much complex to be described); # - meta key can't be described (the terminal forgets it when reset); # The xon-xoff handshaking can't be disabled while in ansi personality, so # emacs can't work at speed greater than 9600 baud. No padding is needed at # this speed. # dch1 has been commented out because it causes annoying glittering when # vi deletes one character at the beginning of a line with tabs in it. # dch makes sysgen(1M) have a horrible behaviour when deleting # a screen and makes screen(1) behave badly, so it is disabled too. The nice # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are # not, so smir and rmir are commented out as well. # From: Francesco Potorti` , 24 Aug 1998 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), am, km, mc5i, mir, msgr, xenl, cols#80, it#8, lines#25, vt#3, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n$<1>, invis=\E[8m, is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, # This is the american terminal. Here tabs work fine. # From: Francesco Potorti` , 24 Aug 1998 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, # This terminal (firmware version 02) has a lot of bugs: # - can't set tabs; # - other bugs in ANSI modes (see above). # This description disables handshaking when using cup. This is because # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal # cannot be used at speeds greater than 9600 baud, because at greater # speeds handshaking is needed even for character sending. If you use # DTR handshaking, you can use even greater speeds. # From: Francesco Potorti` , 24 Aug 1998 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), am, bw, hs, km, mc5i, mir, msgr, xon, cols#80, it#8, lines#25, wsl#46, acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, ind=^J, invis=\EG3, is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, # This is the american terminal. Here tabs work. # From: Francesco Potorti` , 24 Aug 1998 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), hts=\E1, tbc=\E0, use=wy99f, # # The Wyse 160 is combination of the WY-60 and the WY-99gt. # The reset strings are slow and the pad times very depending # on other parameters such as font loading. I have tried # to follow the following outline: # # -> set personality # -> set number of columns # -> set number of lines # -> select the proper font # -> do the initialization # -> set up display memory (2 pages) # # The display memory may be used for either text or graphics. # When "Display Memory = Shared" the terminal will have more pages # but garbage may be left on the screen when you switch from # graphics to text. If "Display Memory = Unshared" then the # text area will be only one page long. # # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid # a bug reported by Robert Dunn, -- esr) wy160|wyse160|Wyse 160, am, bw, hs, km, mc5i, mir, msgr, cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, pfloc=\EZ2%p1%{63}%+%c%p2%s\177, pfx=\EZ1%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, tbc=\E0, tsl=\EF, use=adm+sgr, # wy160-w|wyse160-w|wyse 160 132-column, cols#132, lw#7, nlab#16, wsl#90, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, rs2=\EeF$<150>\E`;$<150>, use=wy160, # wy160-25|wyse160-25|wyse 160 80-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<200>, use=wy160, wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, # wy160-42|wyse160-42|wyse 160 80-column 42-lines, lines#42, clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, rs3=\Ee*$<150>, use=wy160, wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, cols#132, lw#7, nlab#16, wsl#90, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, rs2=\EeF$<150>\E`;$<150>, use=wy160-42, # wy160-43|wyse160-43|wyse 160 80-column 43-lines, lh@, lines#43, lw@, nlab@, pln@, rs3=\Ee+$<150>, use=wy160-42, wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, lh@, lines#43, lw@, nlab@, pln@, rs3=\Ee+$<150>, use=wy160-42-w, # wy160-vb|wyse160-vb|Wyse 160 visible bell, bel@, use=wy160, wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, bel@, use=wy160-w, # # The Wyse 75 is a vt100 lookalike without advanced video. # # The Wyse 75 can support one attribute (e.g. Dim, Inverse, # Underline) without magic cookies. The following description # uses this capability, but when more than one attribute is # put on the screen at once, all attributes will be changed # to be the same as the last attribute given. # The Wyse 75 can support more attributes when used with magic # cookies. The wy75-mc terminal description uses magic cookies # to correctly handle multiple attributes on a screen. # wy75|wyse75|wyse 75, am, hs, mc5i, mir, msgr, xenl, xon, cols#80, lines#24, ma#1, pb#1201, wsl#78, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>, is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, sc=\E7, sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, # # This terminal description uses the non-hidden attribute mode # (with magic cookie). # wy75-mc|wyse75-mc|wyse 75 with magic cookies, msgr@, ma@, xmc#1, blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, use=wy75, wy75-vb|wyse75-vb|wyse 75 with visible bell, pb@, bel@, use=wy75, wy75-w|wyse75-w|wyse 75 in 132 column mode, cols#132, wsl#130, rs2=\E[35h\E[?3h$<80>, use=wy75, wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, pb@, bel@, use=wy75-w, # # Wyse 85 emulating a vt220 7 bit mode. # 24 line screen with status line. # # The vt220 mode permits more function keys but it wipes out # the escape key. I strongly recommend that be set to # escape (esc). # The terminal may have to be set for 8 data bits and 2 stop # bits for the arrow keys to work. # The Wyse 85 runs faster with XON/XOFF enabled. Also the # and work best when XON/XOFF is set. and # leave trash on the screen when used without XON/XOFF. # wy85|wyse85|wyse 85, am, hs, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7, sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, # # Wyse 85 with visual bell. wy85-vb|wyse85-vb|wyse 85 with visible bell, bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, # # Wyse 85 in 132-column mode. wy85-w|wyse85-w|wyse 85 in 132-column mode, cols#132, wsl#132, rs2=\E[35h\E[?3h$<70>, use=wy85, # # Wyse 85 in 132-column mode with visual bell. wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, bel@, use=wy85-w, # From: Kevin Turner , 12 Jul 1998 # This copes with an apparent firmware bug in the wy85. He writes: # "What I did was change leave the terminal cursor keys set to Normal # (instead of application), and change \E[ to \233 for all the keys in # terminfo. At one point, I found some reference indicating that this # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just # me), but I can't find that and the server under my bookmark to "Wyse # Technical" isn't responding. So there's the question of wether the wy85 # terminfo should reflect the manufactuer's intended behaviour of the terminal # or the actual." wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, am, hs, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7, sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[40h\E7\E[25;%i%p1%dH, # # Wyse 185 emulating a vt320 7 bit mode. # # This terminal always displays 25 lines. These lines may be used # as 24 data lines and a terminal status line (top or bottom) or # 25 data lines. The 48 and 50 line modes change the page size # and not the number of lines on the screen. # # The Compose Character key can be used as a meta key if changed # by set-up. # wy185|wyse185|wyse 185, am, hs, km, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, use=vt220+keypad, # # Wyse 185 with 24 data lines and top status (terminal status) wy185-24|wyse185-24|wyse 185 with 24 data lines, hs@, dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185, # # Wyse 185 with visual bell. wy185-vb|wyse185-vb|wyse 185+flash, bel@, use=wy185, # # Wyse 185 in 132-column mode. wy185-w|wyse185-w|wyse 185 in 132-column mode, cols#132, wsl#132, dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, # # Wyse 185 in 132-column mode with visual bell. wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, bel@, use=wy185-w, # wy325 terminfo entries # Done by Joe H. Davis 3-9-92 # lines 25 columns 80 # wy325|wyse325|Wyse epc, am, bw, hs, mc5i, mir, cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, mc5=\Ed#, pfloc=\EZ2%p1%{63}%+%c%p2%s\177, pfx=\EZ1%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, rs3=\EwG\Ee($<100>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, tsl=\EF, use=adm+sgr, # # lines 24 columns 80 vb # wy325-vb|wyse325-vb|wyse-325 with visual bell, bel@, use=wy325, # # lines 24 columns 132 # wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, cols#132, lw#7, nlab#16, wsl#97, cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, rs2=\E`;$<70>, use=wy325, # # lines 25 columns 80 # wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy325, # # lines 25 columns 132 # wy325-25w|wyse325-25w|wy325 132 columns, lh@, lines#25, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # # lines 25 columns 132 vb # wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, bel@, use=wy325-w, # # lines 42 columns 80 # wy325-42|wyse325-42|wyse-325 42 lines, lh@, lines#42, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy325, # # lines 42 columns 132 # wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, lh@, lines#42, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # # lines 42 columns 132 vb # wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, bel@, use=wy325-w, # # lines 43 columns 80 # wy325-43|wyse325-43|wyse-325 43 lines, lh@, lines#43, lw@, nlab@, pln@, use=wy325, # # lines 43 columns 132 # wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, lh@, lines#43, lw@, nlab@, pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, # # lines 43 columns 132 vb # wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, bel@, use=wy325-w, # Wyse 370 -- 24 line screen with status line. # # The terminal may have to be set for 8 data bits and 2 stop # bits for the arrow keys to work. # # If you change keyboards the terminal will send different # escape sequences. # The following definition is for the basic terminal without # function keys. # # -> enter Tektronix 4010/4014 mode # -> exit Tektronix 4010/4014 mode # -> enter ASCII mode (from any ANSI mode) # -> exit ASCII mode (goto native ANSI mode) # -> enter Tek 4207 ANSI mode (from any ANSI mode) # -> exit Tek 4207 mode (goto native ANSI mode) # # Bug: The capability resets attributes. wy370-nk|wyse 370 without function keys, am, ccc, hs, mc5i, mir, msgr, xenl, xon, colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, # # Function key set for the ASCII (wy-50 compatible) keyboard # This is the default 370. # wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, knp=\E[U, kpp=\E[V, use=wy370-nk, # # Function key set for the VT-320 (and wy85) compatible keyboard # wy370-105k|Wyse 370 with 105 key keyboard, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, use=wy370-nk, use=vt220+keypad, # # Function key set for the PC compatible keyboard # wy370-EPC|Wyse 370 with 102 key keyboard, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, # # Wyse 370 with visual bell. wy370-vb|Wyse 370 with visible bell, bel@, use=wy370, # # Wyse 370 in 132-column mode. wy370-w|Wyse 370 in 132-column mode, cols#132, wsl#132, rs2=\E[35h\E[?3h$<70>, use=wy370, # # Wyse 370 in 132-column mode with visual bell. wy370-wvb|Wyse 370 with visible bell 132-columns, flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, wy370-rv|Wyse 370 reverse video, rs3=\E[32h\E[?5h, use=wy370, # # Wyse 99gt Tektronix 4010/4014 emulator, # wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, am, os, cols#74, lines#35, bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, cuu1=^K, ff=^L, hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, home=^]7`x @\037, hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, # # Wyse 160 Tektronix 4010/4014 emulator, # wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, home=^]8`g @\037, use=wy99gt-tek, # # Wyse 370 Tektronix 4010/4014 emulator, # wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, am, os, cols#80, lines#36, bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, cuu1=^K, ff=^L, hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, home=^]8g @\037, hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, # Vendor-supplied Wyse entries end here. # #TITLE: TERMINFO ENTRY WY520 #DATE: 8/5/93 # The WY520 terminfo is based on the WY285 entry published on the WYSE # BBS with the addition of more function keys and special keys. # # rs1 -> set personality # rs2 -> set number of columns # rs3 -> set number of lines # is1 -> select the proper font # is2 -> do the initialization # is3 -> If this string is empty then rs3 gets sent. # # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard # - The BS key is programmed to generate BS in smcup since # is2 doesn't seem to work. # - Remove and shift/Remove: delete a character # - Insert : enter insert mode # - Find : delete to end of file # - Select : clear a line # - F11, F12, F13: send default sequences (not ESC, BS, LF) # - F14 : Home key # - Bottom status line (host writable line) is used. # - smkx,rmkx are removed because this would put the numeric # keypad in Dec application mode which doesn't seem to work # with SCO applications. # wy520|wyse520|wyse 520, am, hs, km, mc5i, mir, xenl, xon, cols#80, it#8, lines#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, vpa=\E[%i%p1%dd, use=vt220+keypad, # # Wyse 520 with 24 data lines and status (terminal status) wy520-24|wyse520-24|wyse 520 with 24 data lines, hs@, dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520, # # Wyse 520 with visual bell. wy520-vb|wyse520-vb|wyse 520 with visible bell, flash=\E[30h\E\,\E[30l$<100>, use=wy520, # # Wyse 520 in 132-column mode. wy520-w|wyse520-w|wyse 520 in 132-column mode, cols#132, wsl#132, dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, # # Wyse 520 in 132-column mode with visual bell. wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, # # # Wyse 520 emulating a vt420 7 bit mode. # The DEL key is programmed to generate BS in is2. # With EPC keyboard. # - 'End' key will clear till end of line on EPC keyboard # - Shift/End : ignored. # - Insert : enter insert mode. # - Delete : delete a character (have to change interrupt character # to CTRL-C: stty intr '^c') for it to work since the # Delete key sends 7FH. wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, use=wy520, # # Wyse 520 with 24 data lines and status (terminal status) # with EPC keyboard. wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, hs@, dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc, # # Wyse 520 with visual bell. wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, # # Wyse 520 in 132-column mode. wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, cols#132, wsl#132, dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, # # Wyse 520 in 132-column mode with visual bell. wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, # # Wyse 520 in 80-column, 36 lines wy520-36|wyse520-36|wyse 520 with 36 data lines, hs@, lines#36, dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520, # # Wyse 520 in 80-column, 48 lines wy520-48|wyse520-48|wyse 520 with 48 data lines, hs@, lines#48, dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520, # # Wyse 520 in 132-column, 36 lines wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, cols#132, wsl#132, rs2=\E[?3h, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36, # # Wyse 520 in 132-column, 48 lines wy520-48w|wyse520-48w|wyse 520 with 48 data lines, cols#132, wsl#132, rs2=\E[?3h, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48, # # # Wyse 520 in 80-column, 36 lines with EPC keyboard wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, hs@, lines#36, dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc, # # Wyse 520 in 80-column, 48 lines with EPC keyboard wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, hs@, lines#48, dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc, # # Wyse 520 in 132-column, 36 lines with EPC keyboard wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, cols#132, wsl#132, rs2=\E[?3h, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc, # # Wyse 520 in 132-column, 48 lines with EPC keyboard wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, cols#132, wsl#132, rs2=\E[?3h, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc, # From: John Gilmore # (wyse-vp: removed , there's no such # file and we don't know what is -- esr) wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, OTbs, am, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, smul=^N, wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, use=wy75, # From: Eric Freudenthal wy100q|Wyse 100 for Quotron, OTbs, cols#80, lines#24, xmc#1, cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, #### Kermit terminal emulations # # Obsolete Kermit versions may be listed in the section describing obsolete # non-ANSI terminal emulators later in the file. # # KERMIT standard all versions. # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) # From: greg small 9-25-84 kermit|standard kermit, OTbs, cols#80, lines#24, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, kermit-am|standard kermit plus auto-margin, am, is2=K1 Standard Kermit plus Automatic Margins\n, use=kermit, # IBMPC Kermit 1.2. # Bugs: , : do not work except at beginning of line! does # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of # line). # From: greg small 8-30-84 pckermit|pckermit12|UCB IBMPC Kermit 1.2, am, lines#25, clear=\EH\EJ, ed@, el@, is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, # IBMPC Kermit 1.20 # Cannot use line 25, now acts funny like ansi special scrolling region. # Initialization must escape from that region by cursor position to line 24. # Cannot use character insert because 1.20 goes crazy if insert at col 80. # Does not use :am: because autowrap is lost when kermit dropped and restarted. # From: greg small 12-19-84 pckermit120|UCB IBMPC Kermit 1.20, it#8, lines#24, cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, il1=\EL, is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, # MS-DOS Kermit 2.27 for the IBMPC # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. # Cannot use line 25, now acts funny like ansi special scrolling region. # Initialization must escape from that region by cursor position to line 24. # Does not use am: because autowrap is lost when kermit dropped and restarted. # Reverse video for standout like H19. # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) # From: greg small 3-17-85 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, OTbs, am@, cols#80, it#8, lines#24, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, # MS-DOS Kermit 2.27 with automatic margins # From: greg small 3-17-85 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, am, cvvis=\EO\Eq\EG\EvK5, is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, use=msk227, # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC # Automatic margins now default. Use ansi for highlights. # Define function keys. # (msk22714: removed obsolete ":kn#10:" -- esr) # From: greg small 3-17-85 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, am, bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, # This was designed for a VT320 emulator, but it is probably a good start # at support for the VT320 itself. # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. # (vt320-k3: I added / based on the init string -- esr) vt320-k3|MS-Kermit 3.00's vt320 emulation, am, eslok, hs, km, mir, msgr, xenl, cols#80, it#8, lines#49, pb#9600, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, # From: Joseph Gil 13 Dec 1991 # ACS capabilities from Philippe De Muyter 30 May 1996 # (I removed a bogus boolean :mo: and added , , -- esr) vt320-k311|dec vt320 series as defined by kermit 3.11, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, ######## NON-ANSI TERMINAL EMULATIONS # #### Avatar # # These entries attempt to describe Avatar, a terminal emulation used with # MS-DOS bulletin-board systems. It was designed to give ANSI-like # capabilities, but with cheaper (shorter) control sequences. Messy design, # excessively dependent on PC idiosyncracies, but apparently rather popular # in the BBS world. # # No color support. Avatar doesn't fit either of the Tektronix or HP color # models that terminfo knows about. An Avatar color attribute is the # low 7 bits of the IBM-PC display-memory attribute. Bletch. # # I wrote these entries while looking at the Avatar spec. I don't have # the facilities to test them. Let me know if they work, or don't. # # Avatar escapes not used by these entries (because maybe you're smarter # and more motivated than I am and can figure out how to wrap terminfo # around some of them, and because they are weird enough to be funny): # level 0: # ^L -- clear window/reset current attribute to default # ^V^A%p1%c -- set current color attribute, parameter decodes as follows: # # bit: 6 5 4 3 2 1 0 # | | | | | # +---+---+ | +---+---+ # | | | # | | foreground color # | foreground intensity # background color # level 0+: # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 # (^V^L and ^V^M set the current attribute as a side-effect.) # ^V ^Y [...] -- repeat pattern. specifies the number of bytes # in the pattern, the number of times the pattern # should be repeated. If either value is 0, no-op. # The pattern can contain Avatar console codes, # including other ^V ^Y patterns. # level 1: # ^V^O -- clockwise mode on; turn print direction right each time you # hit a window edge (yes, really). Turned off by CR # ^V^P -- no-op # ^V^Q%c -- query the driver # ^V^R -- driver reset # ^V^S -- Sound tone (PC-specific) # ^V^T -- change highlight at current cursor poition to %c # ^V^U%p1%c%p2%c -- highlight window with attribute # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c # -- define window # # From: Eric S. Raymond 1 Nov 1995 # (The ///// capabilities exist only to # tell ncurses that the corresponding highlights exist; it should use , # which is the only method that will actually work for multiple highlights.) # # Update by TD - 2004: half of this was inconsistent. Found documentation # and repaired most of the damage. sgr0 is probably incorrect, but the # available documentation gives no clues for a workable string. avatar0|avatar terminal emulator level 0, am, bce, msgr, cols#80, it#8, lines#25, blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, rmacs@, rs2=^L, sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, use=klone+acs, # From: Eric S. Raymond 1 Nov 1995 avatar0+|avatar terminal emulator level 0+, dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, # From: Eric S. Raymond 1 Nov 1995 avatar|avatar1|avatar terminal emulator level 1, civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, #### RBcomm # # RBComm is a lean and mean terminal emulator written by the Interrupt List # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early # '90s), especially in the BBS world, and still has some loyal users due to # its very small memory footprint and to a cute macro language. rbcomm|IBM PC with RBcomm and EMACS keybindings, am, bw, mir, msgr, xenl, cols#80, it#8, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B, cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, rmir=^], rmkx=\E>, rmso=^U, rmul=^U, rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, rbcomm-nam|IBM PC with RBcomm without autowrap, am@, bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, rbcomm-w|IBM PC with RBcomm in 132 column mode, cols#132, bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, ######## LCD DISPLAYS # #### Matrix Orbital # from: Eric Z. Ayers (eric@ale.org) # # Matrix Orbital 20x4 LCD display # Command Character is 0xFE (decimal 254, octal 376) # # On this device, cursor addressability isn't possible. The LCD expects: # 0xfe G # for cup: %p1 == row and %p2 is column # # This line: # cup=\376G%p2%c%p1%c # LOOKS like it will work, but sometimes only one of the two numbers is sent. # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. # # Alas, there is no cursor upline capability on this display. # # These entries add some 'sanity stuff' to the clear function. That is, it # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, # and turns off the cursor blinking and stuff like that. # # NOTE: calling 'beep' turns on the backlight (bell) # NOTE: calling 'flash' turns it on and back off (visual bell) # MtxOrb|Generic Matrix Orbital LCD display, bel=\376B^A, clear=\376X\376C\376R\376K\376T, cnorm=\376K\376T, cub1=\376L, cuf1=\376M, flash=\376B\001$<200>\376F, home=\376H, MtxOrb204|20x4 Matrix Orbital LCD display, cols#20, lines#4, use=MtxOrb, MtxOrb162|16x2 Matrix Orbital LCD display, cols#16, lines#2, use=MtxOrb, # The end ######## OLDER TERMINAL TYPES # # This section is devoted to older commercial terminal brands that are now # discontinued, but known to be still in use or represented by emulations. # #### AT&T (att, tty) # # This section also includes Teletype-branded VDTs. # # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now # Boundless Technologies); for details, see the header comment on the ADDS # section. # # These are AT&T's official terminfo entries. All-caps aliases have been # removed. # att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, am, eo, mir, msgr, xon, cols#80, it#8, lines#24, bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, smso=\E[7m, att2350|AT&T 2350 Video Information Terminal 80 column mode, mc0@, mc4@, mc5@, use=att2300, # Must setup RETURN KEY - CR, REC'VD LF - INDEX. # Seems upward compatible with vt100, plus ins/del line/char. # On sgr, the protection parameter is ignored. # No check is made to make sure that only 3 parameters are output. # standout= reverse + half-intensity = 3 | 5. # bold= reverse + underline = 2 | 3. # note that half-bright blinking doesn't look different from normal blinking. # NOTE:you must program the function keys first, label second! # (att4410: a BSD entry has been seen with the following capabilities: # , , , , , # , , , -- esr) att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, am, hs, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=^M^J, pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%p1%{1}%+%dH, att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, cols#132, wsl#132, is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, OTbs, pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, use=att5410v1, att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, cols#132, wsl#132, is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, # 5410 in terms of a vt100 # (v5410: added / based on init string -- esr) v5410|att5410 in terms of a vt100, am, mir, msgr, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=vt100+fnkeys, # # Teletype Model 5420 -- A souped up 5410, with multiple windows, # even! the 5420 has three modes: scroll, window or page mode # this terminfo should work in scroll or window mode, but doesn't # take advantage of any of the differences between them. # # Has memory below (2 lines!) # 3 pages of memory (plus some spare) # The 5410 sequences for , , ,
, , , , # , would work for these, but these work in both scroll and window # mode... Unset insert character so insert mode works # sets 80 column mode, # escape sequence: # 1) turn off all fonts # 2) function keys off, keyboard lock off, control display off, # insert mode off, erasure mode off, # 3) full duplex, monitor mode off, send graphics off, nl on lf off # 4) reset origin mode # 5) set line wraparound # 6) exit erasure mode, positional attribute mode, and erasure extent mode # 7) clear margins # 8) program ENTER to transmit ^J, # We use \212 to program the ^J because a bare ^J will get translated by # UNIX into a CR/LF. The enter key is needed for AT&T uOMS. # 1 2 3 4 5 6 7 8 # set screen color to black, # No representation in terminfo for the delete word key: kdw1=\Ed # Key capabilities assume the power-up send sequence... # This is not strictly necessary, but it helps maximize # memory usefulness: , # Alternate sgr0: , # Alternate sgr: , # smkx programs the SYS PF keys to send a set sequence. # It also sets up labels f1, f2, ..., f8, and sends edit keys. # This string causes them to send the strings - # when pressed in SYS PF mode. # (att4415: I added / based on the init string -- esr) att4415|tty5420|att5420|AT&T 4415/5420 80 cols, OTbs, db, mir, xon, lh#2, lm#78, lw#8, nlab#8, wsl#55, cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, flash=\E[?5h$<200>\E[?5l, home=\E[x, hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, use=att4410, att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, cols#132, lm#54, wsl#97, is1=\E[?3h$<100>, use=att4415, att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, cols#132, lm#54, wsl#97, flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, use=att4415, # Note that this mode permits programming USER PF KEYS and labels # However, when you program user pf labels you have to reselect # user pf keys to make them appear! att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, pln=\E[%p1%d;0;0;1q%p2%:-16.16s, att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415, att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-rv, att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-w, att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, use=att4415-w-rv, att5420_2|AT&T 5420 model 2 80 cols, am, db, hs, mir, msgr, xon, cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, invis=\E[8m, is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, att5420_2-w|AT&T 5420 model 2 in 132 column mode, cols#132, is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=att5420_2, att4418|att5418|AT&T 5418 80 cols, am, xon, cols#80, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, att4418-w|att5418-w|AT&T 5418 132 cols, cols#132, is1=\E[?3h, use=att5418, att4420|tty4420|teletype 4420, OTbs, da, db, eo, msgr, ul, xon, cols#80, lines#24, lm#72, bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, rmul=\EZ, smdc@, smso=\E}, smul=\E\\, # The following is a terminfo entry for the Teletype 4424 # asynchronous keyboard-display terminal. It supports # the vi editor. The terminal must be set up as follows, # # HIGHLIGHT DEFINITION 3-TONE # DISPLAY FUNCTION GROUP III # # The second entry below provides limited (a la adm3a) # operation under GROUP II. # # This must be used with DISPLAY FUNCTION GROUP I or III # and HIGHLIGHT DEFINITION 3-TONE # The terminal has either bold or blink, depending on options # # (att4424: commented out =\E[1m, we don't need bright locked on -- esr) att4424|tty4424|teletype 4424, OTbs, am, xon, cols#80, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, rmul=\EZ, sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, tbc=\EF, att4424-1|tty4424-1|teletype 4424 in display function group I, kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, use=att4424, # This entry is not one of AT&T's official ones, it was translated from the # 4.4BSD termcap file. The highlight strings are different from att4424. # I have no idea why this is -- older firmware version, maybe? # The following two lines are the comment originally attached to the entry: # This entry appears to avoid the top line - I have no idea why. # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp att4424m|tty4424m|teletype 4424M, am, da, db, mir, cols#80, it#8, lines#23, bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, # The Teletype 5425 is really version 2 of the Teletype 5420. It # is quite similar, except for some minor differences. No page # mode, for example, so all of the sequences used above have # to change back to what's being used for the 5410. Many of the # option settings have changed their numbering as well. # # This has been tested on a preliminary model. # # (att5425: added / based on the init string -- esr) att5425|tty5425|att4425|AT&T 4425/5425, am, da, db, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, invis=\E[8m, is1=\E<\E[?3l$<100>, is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, nel=^M^J, pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, smkx=\E[21;1j\E[25;4j\Eent, use=att4425, att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, cols#132, lm#54, wsl#97, is1=\E[?3h$<100>, use=tty5425, # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. # I also added / -- esr) att4426|tty4426|teletype 4426S, am, da, db, xon, cols#80, lines#24, lm#48, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%dd, # Terminfo entry for the AT&T 510 A Personal Terminal # Function keys 9 - 16 are available only after the # screen labeled (soft keys/action blocks) are labeled. Function key # 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # This entry is based on one done by Ernie Rice at Summit, NJ and # changed by Anne Gallup, Skokie, IL, ttrdc!anne att510a|bct510a|AT&T 510A Personal Terminal, am, mir, msgr, xenl, xon, cols#80, lh#2, lines#24, lw#7, nlab#8, acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # Terminfo entry for the AT&T 510 D Personal Terminal # Function keys 9 through 16 are accessed by bringing up the # system blocks. # Function key 9 corresponds to the leftmost touch target on the screen, # function key 16 corresponds to the rightmost. # # There are problems with soft key labeling. These are due to # strangenesses in the native terminal that are impossible to # describe in a terminfo. att510d|bct510d|AT&T 510D Personal Terminal, am, da, db, mir, msgr, xenl, xon, cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7, sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, # (att500: I merged this with the att513 entry, att500 just used att513 -- esr) att500|att513|AT&T 513 using page mode, am, chts, mir, msgr, xenl, xon, cols#80, lh#2, lines#24, lw#8, nlab#8, acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, invis=\E[8m, is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, nel=\EE, pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, rmul=\E[m, rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, rs2=\E[5;0|, sc=\E7, sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, # 01-07-88 # printer must be set to EMUL ANSI to accept ESC codes # stops at top margin # sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font # and alt font ascii,wrap on,tabs cleared # disables newline on LF,Emphasized off # The capability sets form length att5310|att5320|AT&T Model 53210 or 5320 matrix printer, xhpa, xvpa, bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, orhi#100, orl#12, orvi#72, cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, cr=^M, csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, rshm=\E[m, scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, u0=\E[%p1%dt, vpa=\E[%p1%dd, # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL # The following SET-UP modes are assumed for normal operation: # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL # Other SET-UP modes may be set for operator convenience or communication # requirements. This termcap description is for the Resident Terminal Mode. # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # The BRL entry also said: UNSAFE :ll=\E[70H: att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, am, xon, cols#88, it#8, lines#70, vt#3, bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, rs1=\Ec, sc=\E7, # 5620 terminfo (2.0 or later ROMS with char attributes) # The following SET-UP modes are assumed for normal operation: # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR # Other SET-UP modes may be set for operator convenience or communication # requirements. This termcap description is for Resident Terminal Mode. No # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # assumptions: (scroll forward one line) is only done at screen bottom # Be aware that older versions of the dmd have a firmware bug that affects # parameter defaulting; for this terminal, the 0 in \E[0m is not optional. # is from an otherwise inferior BRL for this terminal. That entry # also has =\E[70H commented out and marked unsafe. # For more, see the 5620 FAQ maintained by David Breneman . att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, OTbs, am, msgr, npc, xon, cols#88, it#8, lines#70, bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, lines#24, use=att5620, att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, lines#34, use=att5620, # 5620 layer running the "S" system's downloaded graphics handler: att5620-s|tty5620-s|layer|vitty|5620 S layer, OTbs, OTpt, am, cols#80, it#8, lines#72, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, # Entries for thru refer to the shifted system pf keys. # # Entries for thru refer to the alternate keypad mode # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER att605|AT&T 605 80 column 102key keyboard, am, eo, xon, cols#80, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, att605-pc|ATT 605 in pc term mode, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, xonc=e, use=att605, att605-w|AT&T 605-w 132 column 102 key keyboard, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605, # (att610: I added / based on the init string. I also # added and because the BSD file says the att615s have them, # and the 615 is like a 610 with a big keyboard, and most of their other # smart terminals support the same sequence -- esr) att610|AT&T 610; 80 column; 98key keyboard, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, att610-w|AT&T 610; 132 column; 98key keyboard, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610, att610-103k|AT&T 610; 80 column; 103key keyboard, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, att610-103k-w|AT&T 610; 132 column; 103key keyboard, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610-103k, att615|AT&T 615; 80 column; 98key keyboard, kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, att615-w|AT&T 615; 132 column; 98key keyboard, kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, att615-103k|AT&T 615; 80 column; 103key keyboard, kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, att615-103k-w|AT&T 615; 132 column; 103key keyboard, kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, # (att620: I added / based on the init string and # / from a BSD termcap -- esr) att620|AT&T 620; 80 column; 98key keyboard, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;, sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, att620-w|AT&T 620; 132 column; 98key keyboard, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620, att620-103k|AT&T 620; 80 column; 103key keyboard, kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, att620-103k-w|AT&T 620; 132 column; 103key keyboard, cols#132, wsl#132, is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620-103k, # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal # The following SETUP modes are assumed for normal operation: # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF # Font_Size=Large Non-Layers_Window_Cols=80 # Non-Layers_Window_Rows=60 # Other SETUP modes may be set for operator convenience or communication # requirements. Some capabilities assume a printer attached to the Aux EIA # port. This termcap description is for the Fixed Non-Layers Window. No # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # (att630: added , and from a BSD termcap file -- esr) att630|AT&T 630 windowing terminal, OTbs, am, da, db, mir, msgr, npc, xon, cols#80, it#8, lines#60, lm#0, bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7, sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m, sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, lines#24, use=att630, # This is the att700 entry for 700 native emulation of the AT&T 700 # terminal. Comments are relative to changes from the 605V2 entry and # att730 on which the entry is based. Comments show the terminfo # capability name, termcap name, and description. # # Here is what's going onm in the init string: # ESC [ 50;4| set 700 native mode (really is 605) # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) # ESC [ 53;0| set GenFlow to Xon/Xoff # ESC [ 8 ;0| set CR on NL # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) # ESC [ ? 4 l jump scroll # ESC [ ? 5 l/h video: normal (l); reverse (h) # ESC [ ?13 l Labels on # ESC [ ?15 l parity check = no # ESC [ 13 l monitor mode off # ESC [ 20 l LF on NL (not CRLF on NL) # ESC [ ? 7 h autowrap on # ESC [ 12 h local echo off # ESC ( B GO = ASCII # ESC ) 0 G1 = Special Char & Line Drawing # ESC [ ? 31 l Set 7 bit controls # # Note: Most terminals, especially the 600 family use Reverse Video for # standout mode. DEC also uses reverse video. The VT100 uses bold in addition # Assume we should stay with reverse video for 70.. However, the 605V2 exits # standout mode with \E[m (all normal attributes). The 730 entry simply # exits reverse video which would leave other current attributes intact. It # was assumed the 730 entry to be more correct so rmso has changed. The # 605V2 has no sequences to turn individual attributes off, thus its setting # and the rmso/smso settings from the 730. # # Note: For the same reason as above in rmso I changed exit under-score mode # to specifically turn off underscore, rather than return to all normal # attributes # # Note: The following pkey_xmit is taken from the 605V2 which contained the # capability as pfxl. It was changed here to pfx since pfxl # will only compile successfully with Unix 4.0 tic. Also note that pfx only # allows strings to be parameters and label values must be programmed as # constant strings. Supposedly the pfxl of Version 4.0 allows both labels # and strings to be parameters. The 605V2 pfx entry should be examined later # in this regard. For reference the 730 pfxl entry is shown here for comparison # 730 pfx entry: # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, # # (for 4.0 tic) # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, # # (for <4.0 tic) # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, # # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 # # Port1 Interface # # modular 10 pin Connector # Left side Right side # Pin 1 2 3 4 5 6 7 8 9 10 # # Key (notch) at bottom # # Pin 1 DSR # 3 DCD # 4 DTR # 5 Sig Ground # 6 RD # 7 SD # 8 CTS # 9 RTS # 10 Frame Ground # # The manual is 189 pages and is loaded with details about the escape codes, # etc..... Available from AT&T CIC 800-432-6600... # ask for Document number 999-300-660.. # att700|AT&T 700 24x80 column display w/102key keyboard, am, eslok, hs, mir, msgr, xenl, xon, cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, tsl=\E7\E[99;%i%p1%dx, # This entry was modified 3/13/90 by JWE. # fixes include additions of , correcting , and modification # of . (See comments below) # att730 has status line of 80 chars # These were commented out: , , # the and up keys are used for shifted system Fkeys # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is # currently the same as (unshifted HOME or \E[H). On the 102, 102+1 # and 122 key keyboards, the 730's translation is \E[2J. For consistency # has been commented out. The user can uncomment if using the # 102, 102+1, or 122 key keyboards # kHOM=\E[2J, # (att730: I added / based on the init string -- esr) att730|AT&T 730 windowing terminal, am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, swidm=\E#6, tsl=\E7\E[;%i%p1%dx, att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, lines#41, use=att730, att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, lines#24, use=att730, att730r|730MTGr|AT&T 730 rev video windowing terminal Version, flash=\E[?5l$<200>\E[?5h, is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730, att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, lines#41, use=att730r, att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, lines#24, use=att730r, # The following represents the screen layout along with the associated # bezel buttons for the 5430/pt505 terminal. The "kf" designations do # not appear on the screen but are shown to reference the bezel buttons. # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate # position relative to the screen. # # # # +----------------------------------------------------------------+ # | | # XXXX | kf0 kf24 | XXXX # | | # | | # XXXX | kf1 kf23 | XXXX # | | # | | # XXXX | kf2 kf22 | XXXX # | | # | | # XXXX | kf3 kf21 | XXXX # | | # | | # XXXX | kf4 kf20 | XXXX # | | # | | # XXXX | kf5 kf19 | XXXX # | | # | | # XXXX | kf6 kf18 | XXXX # | | # | | # XXXX | | XXXX # | | # | | # +----------------------------------------------------------------+ # # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX # # Note: XXXX represents the screen buttons # CMD REDRAW # # MAIL # # version 1 note: # The character string sent by key 'kf26' may be user programmable # to send either \E[16s, or \E[26s. # The character string sent by key 'krfr' may be user programmable # to send either \E[17s, or \E[27s. # # Depression of the "CMD" key sends \E! (kcmd) # Depression of the "MAIL" key sends \E[26s (kf26) # "REDRAW" same as "REFRESH" (krfr) # # "kf" functions adds carriage return to output string if terminal is in # 'new line' mode. # # The following are functions not covered in the table above: # # Set keyboard character (SKC): \EPn1;Pn2w # Pn1= 0 Back Space key # Pn1= 1 Break key # Pn2= Program char (hex) # # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t # Pn1= Window number (1-39) # Pn2-Pn5= Y;X;Y;X coordinates # # Screen Selection (SSL): \E[Pnu # Pn= Window number # # Set Terminal Modes (SM): \E[Pnh # Pn= 3 Graphics mode # Pn= > Cursor blink # Pn= < Enter new line mode # Pn= = Enter reverse insert/replace mode # Pn= ? Enter no scroll mode # # Reset Terminal Mode (RM): \E[Pnl # Pn= 3 Exit graphics mode # Pn= > Exit cursor blink # Pn= < Exit new line mode # Pn= = Exit reverse insert/replace mode # Pn= ? Exit no scroll mode # # Screen Status Report (SSR): \E[Pnp # Pn= 0 Request current window number # Pn= 1 Request current window dimensions # # Device Status Report (DSR): \E[6n Request cursor position # # Call Status Report (CSR): \E[Pnv # Pn= 0 Call failed # Pn= 1 Call successful # # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string # Pn1= Button number to be loaded # Pn2= Character count of "string" # Pn3= Key mode being loaded: # 0= Unshifted # 1= Shifted # 2= Control # String= Text string (15 chars max) # # Screen Number Report (SNR): \E[Pnp # Pn= Screen number # # Screen Dimension Report (SDR): \E[Pn1;Pn2r # Pn1= Number of rows available in window # Pn2= Number of columns available in window # # Cursor Position Report (CPR): \E[Pn1;Pn2R # Pn1= "Y" Position of cursor # Pn2= "X" Position of cursor # # Request Answer Back (RAB): \E[c # # Answer Back Response (ABR): \E[?;*;30;VSV # *= 0 No printer available # *= 2 Printer available # V= Software version number # SV= Software sub version number # (printer-available field not documented in v1) # # Screen Alignment Aid: \En # # Bell (lower pitch): \E[x # # Dial Phone Number: \EPdstring\ # string= Phone number to be dialed # # Set Phone Labels: \EPpstring\ # string= Label for phone buttons # # Set Clock: \EPchour;minute;second\ # # Position Clock: \EPsY;X\ # Y= "Y" coordinate # X= "X" coordinate # # Delete Clock: \Epr\ # # Programming The Function Buttons: \EPfPn;string\ # Pn= Button number (00-06, 18-24) # (kf00-kf06, kf18-kf24) # string= Text to sent on button depression # # The following in version 2 only: # # Request For Local Directory Data: \EPp12;\ # # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ # # Request for Local Directory Data in print format: \EPp13;\ # # Enable 'Prt on Line' mode: \022 (DC2) # # Disable 'Prt on Line' mode: \024 (DC4) # # 05-Aug-86: # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 2 and later. att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, am, xon, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[l\E[=l\E[?l, kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, # The following Terminfo entry describes functions which are supported by # the AT&T 5430/pt505 terminal software version 1. att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, lines#24, mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, lines#22, use=att505, # #### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- # This cut mark helps make life less painful for people running ncurses tic # on machines with relatively little RAM. The file can be broken in half here # cleanly and compiled in sections -- no `use' references cross this cut # going forward. # #### Ampex (Dialogue) # # Yes, these are the same people who are better-known for making audio- and # videotape. I'm told they are located in Redwood City, CA. # # From: Fri Sep 11 22:38:32 1981 # (ampex80: some capabilities merged in from SCO's entry -- esr) ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, OTbs, am, bw, ul, cols#80, it#8, lines#24, bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, tbc=\E3, # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: ampex175|ampex d175, am, cols#80, lines#24, bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, # No backspace key in the main QWERTY cluster. Fortunately, it has a # NEWLINE/PAGE key just above RETURN that sends a strange single-character # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS # mode), this key can be used as the erase key; I find I like this. Because # some people and some systems may not, there is another termcap ("ampex175") # that suppresses this little eccentricity by omitting the relevant capability. ampex175-b|ampex d175 using left arrow for erase, kbs=^_, use=ampex175, # From: Richard Bascove # (ampex210: removed obsolete ":kn#10:" -- esr) ampex210|a210|ampex a210, OTbs, am, hs, xenl, cols#80, it#8, lines#24, xmc#1, cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, fsl=\E.2, home=^^, ht=^I, ich1=\EQ, if=/usr/share/tabset/std, il1=\EE, invis@, is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, tsl=\E.0\Eg\E}\Ef, use=adm+sgr, # (ampex219: I added / based on the init string, added # from ampex219w, added =\E[?3l, irresistibly suggested by , # and moved the padding to be *after* the caps -- esr) ampex219|ampex-219|amp219|Ampex with Automargins, hs, xenl, cols#80, it#8, lines#24, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, ampex219w|ampex-219w|amp219w|Ampex 132 cols, cols#132, lines#24, bel=^G, cr=^M, cud1=^J, ind=^J, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, # (ampex232: removed , no file and no --esr) ampex232|ampex-232|Ampex Model 232, am, cols#80, lines#24, xmc#1, cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, use=adm+sgr, # (ampex: removed , no file and no -- esr) ampex232w|Ampex Model 232 / 132 columns, cols#132, lines#24, is2=\E\034Eg\El, use=ampex232, #### Ann Arbor (aa) # # Ann Arbor made dream terminals for hackers -- large screen sizes and huge # numbers of function keys. At least some used monitors in portrait mode, # allowing up to 76-character screen heights! They were reachable at: # # Ann Arbor Terminals # 6175 Jackson Road # Ann Arbor, MI 48103 # (313)-663-8000 # # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor # can't be found on the Web; I fear they're long dead. R.I.P. # # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. # Highly modified 6/22 by Mike O'Brien. # split out into several for the various screen sizes by dave-yost@rand # Modifications made 3/82 by Mark Horton # Modified by Tom Quarles at UCB for greater efficiency and more diversity # status line moved to top of screen, removed 5/82 # Some unknown person at SCO then hacked the init strings to make them more # efficient. # # assumes the following setup: # A menu: 0000 1010 0001 0000 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 # C menu: 56 66 0 0 9600 0110 1100 # D menu: 0110 1001 1 0 # # Briefly, the settings are for the following modes: # (values are for bit set/clear with * indicating our preference # and the value used to test these termcaps) # Note that many of these settings are irrelevent to the terminfo # and are just set to the default mode of the terminal as shipped # by the factory. # # A menu: 0000 1010 0001 0000 # Block/underline cursor* # blinking/nonblinking cursor* # key click/no key click* # bell/no bell at column 72* # # key pad is cursor control*/key pad is numeric # return and line feed/return for key * # repeat after .5 sec*/no repeat # repeat at 25/15 chars per sec. * # # hold data until pause pressed/process data unless pause pressed* # slow scroll/no slow scroll* # Hold in area/don't hold in area* # functions keys have default*/function keys disabled on powerup # # show/don't show position of cursor during page transmit* # unused # unused # unused # # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 # Baud rate (9600*) # # 2 bits of parity - 00=odd,01=even*,10=space,11=mark # 1 stop bit*/2 stop bits # parity error detection off*/on # # keyboard local/on line* # half/full duplex* # disable/do not disable keyboard after data transmission* # # transmit entire page/stop transmission at cursor* # transfer/do not transfer protected characters* # transmit all characters/transmit only selected characters* # transmit all selected areas/transmit only 1 selected area* # # transmit/do not transmit line separators to host* # transmit/do not transmit page tab stops tabs to host* # transmit/do not transmit column tab stop tabs to host* # transmit/do not transmit graphics control (underline,inverse..)* # # enable*/disable auto XON/XOFF control # require/do not require receipt of a DC1 from host after each LF* # pause key acts as a meta key/pause key is pause* # unused # # unused # unused # unused # unused # # XON character (17*) # XOFF character (19*) # # C menu: 56 66 0 0 9600 0110 1100 # number of lines to print data on (printer) (56*) # # number of lines on a sheet of paper (printer) (66*) # # left margin (printer) (0*) # # number of pad chars on new line to printer (0*) # # printer baud rate (9600*) # # printer parity: 00=odd,01=even*,10=space,11=mark # printer stop bits: 2*/1 # print/do not print guarded areas* # # new line is: 01=LF,10=CR,11=CRLF* # unused # unused # # D menu: 0110 1001 1 0 # LF is newline/LF is down one line, same column* # wrap to preceding line if move left from col 1*/don't wrap # wrap to next line if move right from col 80*/don't wrap # backspace is/is not destructive* # # display*/ignore DEL character # display will not/will scroll* # page/column tab stops* # erase everything*/erase unprotected only # # editing extent: 0=display,1=line*,2=field,3=area # # unused # annarbor4080|aa4080|ann arbor 4080, OTbs, am, cols#80, lines#40, bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, # Strange Ann Arbor terminal from BRL aas1901|Ann Arbor K4080 w/S1901 mod, am, cols#80, lines#40, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, nel=^M^J, # If you're using the GNU termcap library, add # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: # to these capabilities. This is the nonstandard GNU termcap scrolling # capability, arguments are: # 1. Total number of lines on the screen. # 2. Number of lines above desired scroll region. # 3. Number of lines below (outside of) desired scroll region. # 4. Total number of lines on the screen, the same as the first parameter. # The generic Ann Arbor entry is the only one that uses this. aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), OTbs, am, km, mc5i, mir, xon, cols#80, it#8, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, sgr0=\E[m, smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, aaa+rv|ann arbor ambassador in reverse video, blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, rs1=\E[H\E[7m\E[J$<156>, sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016, sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, # Ambassador with the DEC option, for partial vt100 compatibility. aaa+dec|ann arbor ambassador in dec vt100 mode, acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, smacs=^O, aaa-18|ann arbor ambassador/18 lines, lines#18, is2=\E7\E[60;0;0;18p\E8, rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, use=aaa+unk, aaa-18-rv|ann arbor ambassador/18 lines+reverse video, use=aaa+rv, use=aaa-18, aaa-20|ann arbor ambassador/20 lines, lines#20, is2=\E7\E[60;0;0;20p\E8, rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, use=aaa+unk, aaa-22|ann arbor ambassador/22 lines, lines#22, is2=\E7\E[60;0;0;22p\E8, rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, use=aaa+unk, aaa-24|ann arbor ambassador/24 lines, lines#24, is2=\E7\E[60;0;0;24p\E8, rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, use=aaa+unk, aaa-24-rv|ann arbor ambassador/24 lines+reverse video, use=aaa+rv, use=aaa-24, aaa-26|ann arbor ambassador/26 lines, lines#26, is2=\E7\E[60;0;0;26p\E8, rmcup=\E[60;0;0;26p\E[26;1H\E[K, smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, aaa-28|ann arbor ambassador/28 lines, lines#28, is2=\E7\E[60;0;0;28p\E8, rmcup=\E[60;0;0;28p\E[28;1H\E[K, smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, eslok, hs, lines#29, dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, rmcup=\E[60;1;0;30p\E[29;1H\E[K, smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, use=aaa+rv, use=aaa-30-s, aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, rmcup=\E[60;1;0;30p\E[59;1H\E[K, smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, rmcup=\E[60;1;0;30p\E[59;1H\E[K, smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, lines#30, is2=\E7\E[60;0;0;30p\E8, rmcup=\E[60;0;0;30p\E[30;1H\E[K, smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, use=aaa+rv, use=aaa-30, aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, use=aaa-30, aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, use=aaa+rv, use=aaa-30, aaa-36|ann arbor ambassador/36 lines, lines#36, is2=\E7\E[60;0;0;36p\E8, rmcup=\E[60;0;0;36p\E[36;1H\E[K, smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, aaa-36-rv|ann arbor ambassador/36 lines+reverse video, use=aaa+rv, use=aaa-36, aaa-40|ann arbor ambassador/40 lines, lines#40, is2=\E7\E[60;0;0;40p\E8, rmcup=\E[60;0;0;40p\E[40;1H\E[K, smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, aaa-40-rv|ann arbor ambassador/40 lines+reverse video, use=aaa+rv, use=aaa-40, aaa-48|ann arbor ambassador/48 lines, lines#48, is2=\E7\E[60;0;0;48p\E8, rmcup=\E[60;0;0;48p\E[48;1H\E[K, smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, aaa-48-rv|ann arbor ambassador/48 lines+reverse video, use=aaa+rv, use=aaa-48, aaa-60-s|ann arbor ambassador/59 lines+status, eslok, hs, lines#59, dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, use=aaa+rv, use=aaa-60-s, aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, use=aaa+dec, use=aaa+rv, use=aaa-60-s, aaa-60|ann arbor ambassador/60 lines, lines#60, is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, use=aaa+unk, aaa-60-rv|ann arbor ambassador/60 lines+reverse video, use=aaa+rv, use=aaa-60, aaa-db|ann arbor ambassador 30/destructive backspace, OTbs@, cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, lines#33, flash=\E[>59h$<100>\E[>59l, is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, guru+rv|guru changes for reverse video, flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, use=guru+rv, use=guru-33, guru+s|guru status line, eslok, hs, dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, rmcup=\E[255;1p\E[255;1H\E[K, smcup=, tsl=\E[>51h\E[1;%p1%dH\E[2K, guru-nctxt|guru with no saved context, smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, guru-s|guru-33-s|ann arbor guru/33 lines+status, lines#32, is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, guru-24|ann arbor guru 24 lines, cols#80, lines#24, is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, use=guru+unk, guru-44|ann arbor guru 44 lines, cols#97, lines#44, is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, use=guru+unk, guru-44-s|ann arbor guru/44 lines+status, lines#43, is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, guru-76|guru with 76 lines by 89 cols, cols#89, lines#76, is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, use=guru+unk, guru-76-s|ann arbor guru/76 lines+status, cols#89, lines#75, is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, guru-76-lp|guru-lp|guru with page bigger than line printer, cols#134, lines#76, is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, use=guru+unk, guru-76-w|guru 76 lines by 178 cols, cols#178, lines#76, is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, use=guru+unk, guru-76-w-s|ann arbor guru/76 lines+status+wide, cols#178, lines#75, is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, cols#178, lines#76, is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, use=guru+unk, aaa-rv-unk|ann arbor unknown type, lh#0, lw#0, nlab#0, blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, rs1=\E[H\E[7m\E[J, sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m, sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, #### Applied Digital Data Systems (adds) # # ADDS itself is long gone. ADDS was bought by NCR, and the same group made # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for # terminals was merged again. Then AT&T sold the terminal business to # SunRiver, which later changed its name to Boundless Technologies. The # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there # as of early 1995) are at: # # Boundless Technologies # 100 Marcus Boulevard # Hauppauge, NY 11788-3762 # Vox: (800)-231-5445 # Fax: (516)-342-7378 # Web: http://boundless.com # # Their voice mail used to describe the place as "SunRiver (formerly ADDS)". # In 1995 Boundless acquired DEC's terminals business. # # Regent: lowest common denominator, works on all regents. # (regent: renamed ":bc:" to ":le:" -- esr) regent|Adds Regent Series, OTbs, am, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, home=\EY\s\s, ind=^J, ll=^A, # Regent 100 has a bug where if computer sends escape when user is holding # down shift key it gets confused, so we avoid escape. regent100|Adds Regent 100, xmc#1, bel=^G, cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, regent20|Adds Regent 20, bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent, regent25|Adds Regent 25, bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20, regent40|Adds Regent 40, xmc#1, bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent25, regent40+|Adds Regent 40+, is2=\EB, use=regent40, regent60|regent200|Adds Regent 60, dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, use=regent40+, # From: Thu Jul 9 09:27:33 1981 # (viewpoint: added , function key, and capabilities -- esr) viewpoint|addsviewpoint|adds viewpoint, OTbs, am, cols#80, lines#24, bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, # Some viewpoints have bad ROMs that foo up on ^O screwpoint|adds viewpoint with ^O bug, cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, # From: Jay S. Rouman 5 Jul 92 # The /// strings were added by ESR from specs. # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, # underline=01100000, rev=01010000, blink=01000010,dim=01000001, # invis=01000100 and %c is the logical or of desired attributes. # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. # # Update by TD - 2004: # Adapted from # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt # # COMMANDS ASCII CODE # # Address, Absolute ESC,=,row,column # Beep BEL # Aux Port Enable ESC,@ # Aux Port Disable ESC,A # Backspace BS # Cursor back BS # Cursor down LF # Cursor forward FF # Cursor home RS # Cursor up VT # Cursor supress ETB # Cursor enable CAN # Erase to end of line ESC,T # Erase to end of page ESC,Y # Erase screen SUB # Keyboard lock SI # Keyboard unlock SO # Read current cursor position ESC,? # Set Attribute ESC,0,x (see below for values of x) # Tag bit reset ESC,( # Tag bit set ESC,) # Transparent Print on ESC,3 # Transparent Print off ESC,4 # # # ATTRIBUTES # # Normal @ 0100 # Half Intensity A 0101 # Blinking B 0102 # Half Intensity Blinking C 0103 # Reverse Video P 0120 # Reverse Video Half Intensity Q 0121 # Reverse Video Blinking R 0122 # Reverse Video Half Intensity # Blinking S 0123 # Underlined ` 0140 # Underlined Half Intensity a 0141 # Underlined Blinking b 0142 # Underlined Half Intensity # Blinking c 0143 # Video suppress D 0104 vp3a+|viewpoint3a+|adds viewpoint 3a+, am, bw, cols#80, it#8, lines#24, blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E), kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, nel=^M^J, rev=\E0P\E), rmso=\E(, sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), vp60|viewpoint60|addsvp60|adds viewpoint60, use=regent40, # # adds viewpoint 90 - from cornell # Note: emacs sends ei occasionally to insure the terminal is out of # insert mode. This unfortunately puts the viewpoint90 IN insert # mode. A hack to get around this is . (Also, # - :ei=:im=: must be present in the termcap translation.) # - indicates glitch that attributes stick to location # - means it's safe to move in standout mode # - : clears screen and visual attributes without affecting # the status line # Function key and label capabilities merged in from SCO. vp90|viewpoint90|adds viewpoint 90, OTbs, bw, msgr, xhp, cols#80, lines#24, clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, # Note: if return acts weird on a980, check internal switch #2 # on the top chip on the CONTROL pc board. adds980|a980|adds consul 980, OTbs, am, cols#80, lines#24, bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, #### C. Itoh Electronics # # As of 1995 these people no longer make terminals (they're still in the # printer business). Their terminals were all clones of the DEC VT series. # They're located in Orange County, CA. # # CIT 80 - vt-52 emulator, the termcap has been modified to remove # the delay times and do an auto tab set rather than the indirect # file used in vt100. cit80|cit-80|citoh 80, OTbs, am, cols#80, lines#24, clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, # From: Tim Wood Fri Sep 27 09:39:12 PDT 1985 # (cit101: added / based on init string, merged this with c101 -- esr) cit101|citc|C.itoh fast vt100, OTbs, am, xenl, cols#80, lines#24, bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, # CIE Terminals CIT-101e from Geoff Kuenning via BRL # The following termcap entry was created from the Callan cd100 entry. The # last two lines (with the capabilities in caps) are used by RM-cobol to allow # full selection of combinations of reverse video, underline, and blink. # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) cit101e|C. Itoh CIT-101e, OTbs, OTpt, am, mir, msgr, cols#80, it#8, lines#24, acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, # From: David S. Lawyer, June 1997: # The CIT 101-e was made in Japan in 1983-4 and imported by CIE # Terminals in Irvine, CA. It was part of CITOH Electronics. In the # late 1980's CIT Terminals went out of business. # There is no need to use the initialization string is=... (by invoking # tset or setterm etc.) provided that the terminal has been manually set # up (and the setup saved with ^S) to be compatible with this termcap. To be # compatible it should be in ANSI mode (not VT52). A set-up that # works is to set all the manually setable stuff to factory defaults # by pressing ^D in set-up mode. Then increse the brighness with the # up-arrow key since the factory default will likely be dim on an old # terminal. Then change any options you want (provided that they are # compatible with the termcap). For my terminal I set: Screen # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: # on. I also set up mine for parity (but you may not need it). Then # save the setup with ^S. # (cit101e-rv: added empty to suppress a tic warning. --esr) cit101e-rv|Citoh CIT-101e (sets reverse video), am, eo, mir, msgr, xenl, xon, cols#80, it#8, lines#24, OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, u8=\E[?6c, u9=\E[c, cit101e-n|CIT-101e w/o am, am@, cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, cit101e-132|CIT-101e with 132 cols, cols#132, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, cit101e-n132|CIT-101e with 132 cols w/o am, am@, cols#132, cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, # CIE Terminals CIT-500 from BRL # The following SET-UP modes are assumed for normal operation: # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF # Other SET-UP modes may be set for operator convenience or communication # requirements. # Hardware tabs are assumed to be set every 8 columns; they can be set up # by the "reset", "tset", or "tabs" utilities. No delays are specified; use # "stty ixon -ixany" to enable DC3/DC1 flow control! # (cit500: I added / based on the init string -- esr) cit500|CIE Terminals CIT-500, OTbs, OTpt, mir, msgr, xon, OTkn#10, cols#80, it#8, lines#64, vt#3, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # C. Itoh printers begin here citoh|ci8510|8510|c.itoh 8510a, cols#80, it#8, bold=\E!, cub1@, is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, smul=\EX, use=lpr, citoh-pica|citoh in pica, is1=\EN, use=citoh, citoh-elite|citoh in elite, cols#96, is1=\EE, is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., use=citoh, citoh-comp|citoh in compressed, cols#136, is1=\EQ, is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., use=citoh, # citoh has infinite cols because we don't want lp ever inserting \n\t**. citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, cols#32767, is1=\EP, use=citoh, citoh-6lpi|citoh in 6 lines per inch mode, is3=\EA, use=citoh, citoh-8lpi|citoh in 8 lines per inch mode, lines#88, is3=\EB, use=citoh, #### Control Data (cdc) # cdc456|cdc 456 terminal, OTbs, am, cols#80, lines#24, bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, el=^V, home=^Y, il1=\EL, ind=^J, # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) cdc721|CDC Viking, OTbs, am, cols#80, lines#24, clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^W, khome=^Y, cdc721ll|CDC Vikingll, OTbs, am, cols#132, lines#24, clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^W, khome=^Y, # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out cdc752|CDC 752, OTbs, am, bw, xhp, cols#80, lines#24, bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, # CDC 756 # The following switch/key settings are assumed for normal operation: # 96 chars SCROLL FULL duplex not BLOCK # Other switches may be set according to communication requirements. # Insert/delete-character cannot be used, as the whole display is affected. # "so" & "se" are commented out until jove handles "sg" correctly. cdc756|CDC 756, OTbs, am, bw, OTkn#10, cols#80, lines#24, bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, rs1=\031\030\002\003\017, # # CDC 721 from Robert Viduya, Ga. Tech. via BRL. # # Part of the long initialization string defines the "DOWN" key to the left # of the tab key to send an ESC. The real ESC key is positioned way out # in right field. # # The termcap won't work in 132 column mode due to the way it it moves the # cursor. Termcap doesn't have the capability (as far as I could tell) to # handle the 721 in 132 column mode. # # (cdc721: changed :ri: to :sr: -- esr) cdc721-esc|Control Data 721, OTbs, OTpt, am, bw, msgr, xon, OTkn#10, cols#80, it#8, lines#30, bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\, tbc=^^^RY, #### Getronics # # Getronics is a Dutch electronics company that at one time was called # `Geveke' and made async terminals; but (according to the company itself!) # they've lost all their documentation on the command set. The hardware # documentation suggests the terminals were actually manufactured by a # Taiwanese electronics company named Cal-Comp. There are known # to have been at least two models, the 33 and the 50. # # The 50 seems to be a top end vt220 clone, with the addition of a higher # screen resolution, a larger screen, at least 1 page of memory above and # below the screen, apparently pages of memory right and left of the screen # which can be panned, and about 75 function keys (15 function keys x normal, # shift, control, func A, func B). It also has more setup possibilities than # the vt220. The monitor case is dated November 1978 and the keyboard case is # May 1982. # # The vt100 emulation works as is. The entry below describes the rather # non-conformant (but more featureful) ANSI mode. # # From: Stephen Peterson , 27 May 1995 visa50|geveke visa 50 terminal in ansi 80 character mode, bw, mir, msgr, cols#80, lines#25, acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, lf3=A insert line, lf4=A delete line, lf5=A clear, lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, #### Human Designed Systems (Concept) # # Human Designed Systems # 400 Fehley Drive # King of Prussia, PA 19406 # Vox: (610)-277-8300 # Fax: (610)-275-5739 # Net: support@hds.com # # John Martin is their termcap expert. They're mostly out of # the character-terminal business now (1995) and making X terminals. In # particular, the whole `Concept' line described here was discontinued long # ago. # # From: Sat Jun 27 07:41:20 1981 # Extensive changes to c108 by arpavax:eric Feb 1982 # Some unknown person at SCO then translated it to terminfo. # # There seem to be a number of different versions of the C108 PROMS # (with bug fixes in its Z-80 program). # # The first one that we had would lock out the keyboard of you # sent lots of short lines (like /usr/dict/words) at 9600 baud. # Try that on your C108 and see if it sends a ^S when you type it. # If so, you have an old version of the PROMs. # # You should configure the C108 to send ^S/^Q before running this. # It is much faster (at 9600 baud) than the c100 because the delays # are not fixed. # new status line display entries for c108-8p: # - init str #3 - setup term for status display - # set programmer mode, select window 2, define window at last # line of memory, set bkgnd stat mesg there, select window 0. # # - to status line - select window 2, home cursor, erase to # end-of-window, 1/2 bright on, goto(line#0, col#?) # # - from status line - 1/2 bright off, select window 0 # # - disable status display - set bkgnd status mesg with # illegal window # # # There are probably more function keys that should be added but # I don't know what they are. # # No delays needed on c108 because of ^S/^Q handshaking # c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, c108-4p|concept108-4p|concept 108 w/4 pages, OTbs, eslok, hs, xon, pb@, acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, ind=^J, is1=\EK\E!\E F, is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, smcup=\EU\Ev 8p\Ep\r\E\025, tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, use=c108-rv-4p, c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, use=c108-4p, c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, cols#132, is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, # Concept 100: # These have only window relative cursor addressing, not screen # relative. To get it to work right here, smcup/rmcup (which # were invented for the concept) lock you into a one page # window for screen style programs. # # To get out of the one page window, we use a clever trick: # we set the window size to zero ("\Ev " in rmcup) which the # terminal recognizes as an error and resets the window to all # of memory. # # This trick works on c100 but does not on c108, sigh. # # Some tty drivers use cr3 for concept, others use nl3, hence # the delays on cr and ind below. This padding is only needed at # 9600 baud and up. One or the other is commented out depending on # local conventions. # # 2 ms padding on isn't always enough. 6 works fine. Maybe # less than 6 but more than 2 will work. # # Note: can't use function keys f7-f10 because they are # indistinguishable from arrow keys (!), also, del char and # clear eol use xon/xoff so they probably won't work very well. # # Also note that we don't define insrt/del char/delline/eop/send # because they don't transmit unless we reset them - I figured # it was a bad idea to clobber their definitions. # # The sequence changes the escape character to ^^ so that # escapes will be passed through to the printer. Only trouble # is that ^^ won't be - ^^ was chosen to be unlikely. # Unfortunately, if you're sending raster bits through to be # plotted, any character you choose will be likely, so we lose. # # \EQ"\EY(^W (send anything from printer to host, for xon/xoff) # cannot be # in is2 because it will hang a c100 with no printer # if sent twice. c100|concept100|concept|c104|c100-4p|hds concept 100, OTbs, am, eo, mir, ul, xenl, cols#80, lines#24, pb#9600, vt#8, bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, cub1=^H, cud1=^J, cuf1=\E=, cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, is1=\EK, is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, rmso=\Ed, rmul=\Eg, sgr0=\EN@, smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, smso=\ED, smul=\EG, c100-rv|c100-rv-4p|concept100-rv|c100 rev video, cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, use=c100, oc100|oconcept|c100-1p|old 1 page concept 100, in, is3@, use=c100, # From: Walter Skorski , 16-oct-1996. # Lots of notes, originally inline, but ncurses doesn't grok that. # # am: not available in power on mode, but turned on with \E[=107;207h in # is2=. Also, \E=124l in is2= could have been used to prevent needing # to specify xenl:, but that would have rendered the last space on the # last line useless. # bw: Not available in power on mode, but turned on with \E[=107;207h in # is2=. # clear: Could be done with \E[2J alone, except that vi (and probably most # other programs) assume that this also homes the cursor. # dsl: Go to window 2, go to the beginning of the line, use a line feed to # scroll the window, and go back to window 1. # is2: the string may cause a warning to be issued by tic that it # found a very long line and that it suspects that a comma is missing # somewhere. This warning can be ignored (unless it comes up more than # once). The initialization string contains the following commands: # # [Setup mode items changed from factory defaults:] # \E)0 set alternate character set to # graphics # ^O set character set to default # [In case it wasn't] # \E[m turn off all attributes # [In case they weren't off] # \E[=107; cursor wrap and # 207h character wrap on # \E[90;3u set Fkey definitions to "transmit" # defaults # \E[92;3u set cursor key definitions to # "transmit" defaults # \E[43;1u set shift F13 to transmit... # \177\E$P\177 # \E[44;1u set shift F14 to transmit... # \177\E$Q\177 # \E[45;1u set shift F15 to transmit... # \177\E$R\177 # \E[46;1u set shift F16 to transmit... # \177\E$S\177 # \E[200;1u set shift up to transmit... # \177\E$A\177 # \E[201;1u set shift down to transmit... # \177\E$B\177 # \E[202;1u set shift right to transmit... # \177\E$C\177 # \E[203;1u set shift left to transmit... # \177\E$D\177 # \E[204;1u set shift home to transmit... # \177\E$H\177 # \E[212;1u set backtab to transmit... # \177\E$I\177 # \E[213;1u set shift backspace to transmit... # \177\E$^H\177 # \E[214;1u set shift del to transmit... # "\E$\177" # [Necessary items not mentioned in setup mode:] # \E[2!w move to window 2 # \E[25;25w define window as line 25 of memory # \E[!w move to window 1 # \E[2*w show current line of window 2 as # status line # \E[2+x set meta key to use high bit # \E[;3+} move underline to bottom of character # # All Fkeys are set to their default transmit definitions with \E[90;3u # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty # setting MUST be redefined or deactivated, because the default is # contained in almost all of this terminal's Fkey strings! If for some # reason "quit" cannot be altered, the Fkeys can, but it would be # necessary to change ^| to ^] in all of these definitions, and add # \E[2;029!t to is2. # lines: is set to 24 because this terminal refuses to treat the 25th # line normally. # ll: Not available in power on mode, but turned on with \E[=107;207h in # is2=. # lm: Pointless, given that this definition locks a single screen of # memory into view, but what the hey... # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any # other attributes alone), but some programs expect this to turn off # everything. # rmul: Could use \E[4!{ to turn off only underline (leaving any other # attributes alone), but some programs expect this to turn off # everything. # sgr: Attributes are set on this terminal with the string \E[ followed by # a list of attribute code numbers (in decimal, separated by # semicolons), followed by the character m. The attribute code # numbers are: # 1 for bold; # 2 for dim (which is ignored in power on mode); # 4 for underline; # 5 for blinking; # 7 for inverse; # 8 for not displayable; and # =99 for protected (except that there are strange side # effects to protected characters which make them inadvisable). # The mapping of terminfo parameters to attributes is as follows: # %p1 (standout) = bold and inverse together; # %p2 (underline) = underline; # %p3 (reverse) = inverse; # %p4 (blink) = blinking; # %p5 (dim) is ignored; # %p6 (bold) = bold; # %p7 (invisible) = not displayable; # %p8 (protected) is ignored; and # %p9 (alt char set) = alt char set. # The code to do this is: # \E[0 OUTPUT \E[0 # %?%p1%p6%O IF (standout; bold) OR # %t;1 THEN OUTPUT ;1 # %; ENDIF # %?%p2 IF underline # %t;4 THEN OUTPUT ;4 # %; ENDIF # %?%p4 IF blink # %t;5 THEN OUTPUT ;5 # %; ENDIF # %?%p1%p3%O IF (standout; reverse) OR # %t;7 THEN OUTPUT ;7 # %; ENDIF # %?%p7 IF invisible # %t;8 THEN OUTPUT ;8 # %; ENDIF # m OUTPUT m # %?%p9 IF altcharset # %t^N THEN OUTPUT ^N # %e^O ELSE OUTPUT ^O # %; ENDIF # sgr0: Everything is turned off (including alternate character set), since # there is no way of knowing what it is that the program wants turned # off. # smul: The "underline" attribute is reconfigurable to an overline or # strikethru, or (as done with \E[;3+} in is2=), to a line at the true # bottom of the character cell. This was done to allow for more readable # underlined characters, and to be able to distinguish between an # underlined space, an underscore, and an underlined underscore. # xenl: Terminal can be configured to not need this, but this "glitch" # behavior is actually preferable with autowrap terminals. # # Parameters kf31= thru kf53= actually contain the strings sent by the shifted # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 # string modifies the 'O' in kf43 to kf46 to a '$'. # # kcbt was originally ^I but redefined in is2=. # kHOM was \E[H originally but redefined in is2=, as were a number of # other keys. # kDC was originally \177 but redefined in is2=. # # kbs: Shift was also ^H originally but redefined as \E$^H in is2=. # tsl: Go to window 2, then do an hpa=. # #------- flash=\E[8;3!}^G\E[3;3!} #------- flash=\E[?5h$<100>\E[?5l # There are two ways to flash the screen, both of which have their drawbacks. # The first is to set the bell mode to video, transmit a bell character, and # set the bell mode back - but to what? There is no way of knowing what the # user's old bell setting was before we messed with it. Worse, the command to # set the bell mode also sets the key click volume, and there is no way to say # "leave that alone", or to know what it's set to, either. # The second way to do a flash is to set the screen to inverse video, pad for a # tenth of a second, and set it back - but like before, there's no way to know # that the screen wasn't ALREADY in inverse video, or that the user may prefer # it that way. The point is moot anyway, since vi (and probably other # programs) assume that by defining flash=, you want the computer to use it # INSTEAD of bel=, rather than as a secondary type of signal. # #------- cvvis=\E[+{ # The is the power on setting, which is also as visible as the cursor # gets. #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw # Windowing is possible, but not defined here because it is also used to # emulate status line functions. Allowing a program to set a window could # clobber the status line or render it unusable. There is additional memory, # but screen scroll functions are destructive and do not make use of it. # #------- dim= Not available in power on mode. # You have a choice of defining low intensity characters as "half bright" and # high intensity as "normal", or defining low as "normal" and high as "bold". # No matter which you choose, only one of either "half bright" or "bold" is # available at any time, so taking the time to override the default is # pointless. # #------- prot=\E[=0;99m # Not defined, because it appears to have some strange side effects. #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; # Available, but making them available to programs is inadvisable. # The code to do this is: # %?%p1%{24}%< IF ((key; 24) <; # %p1%{30}%> ((key; 30) >; # %p1%{54}%< (key; 54) < # %A ) AND # %O ) OR # [that is, "IF key < 24 OR (key > 30 AND key < 54)",] # %t\E[ THEN OUTPUT \E[ # %p1%d OUTPUT (key) as decimal # [next line applies to pfx only] # ;1 OUTPUT ;1 # u OUTPUT u # \177 OUTPUT \177 # %p2%s OUTPUT (string) as string # \177 OUTPUT \177 # [DEL chosen as delimiter, but could be any character] # [implied: ELSE do nothing] # %; ENDIF # #------- rs2= # Not defined since anything it might do could be done faster and easier with # either Meta-Shift-Reset or the main power switch. # #------- smkx=\E[1!z #------- rmkx=\E[!z # These sequences apply to the cursor and setup keys only, not to the # numeric keypad. But it doesn't matter anyway, since making these # available to programs is inadvisable. # For the key definitions below, all sequences beginning with \E$ are # custom and programmed into the terminal via is2. \E$ also has no # meaning to any other terminal. # #------- cmdch=\E[;%p1%d!t # Available, but making it available to programs is inadvisable. #------- smxon=\E[1*q # Available, but making it available to programs is inadvisable. # Terminal will send XON/XOFF on buffer overflow. #------- rmxon=\E[*q # Available, but making it available to programs is inadvisable. # Terminal will not notify on buffer overflow. #------- smm=\E[2+x #------- rmm=\E[+x # Available, but making them available to programs is inadvisable. # # Printing: # It's not made clear in the manuals, but based on other ansi/vt type # terminals, it's a good guess that this terminal is capable of both # "transparent print" (which doesn't copy data to the screen, and # therefore needs mc5i: specified to say so) and "auxilliary print" # (which does duplicate printed data on the screen, in which case mc4= # and mc5= should use the \E[?4i and \E[?5i strings instead). hds200|Human Designed Systems HDS200, am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, lm#0, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, clear=\E[H\E[J, cnorm=\E[+{, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[0;8m, is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, rmul=\E[m\017, sc=\E7, sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, vpa=\E[%i%p1%dd, # through included to specify padding needed in raw mode. # (avt-ns: added empty to suppress a tic warning --esr) avt-ns|concept avt no status line, OTbs, am, eo, mir, ul, xenl, xon, cols#80, it#8, lines#24, lm#192, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, sc=\E7, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>, sgr0=\E[m\016$<1>, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, avt-rv-ns|concept avt in reverse video mode/no status line, flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt-ns, avt-w-ns|concept avt in 132 column mode/no status line, is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt-ns, avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, smcup=\E[H\E[1;24;1;132w, use=avt-ns, # Concept AVT with status line. We get the status line using the # "Background status line" feature of the terminal. We swipe the # first line of memory in window 2 for the status line, keeping # 191 lines of memory and 24 screen lines for regular use. # The first line is used instead of the last so that this works # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this # assumes an 8 page AVT but lm isn't currently used anywhere.) # avt+s|concept avt status line changes, eslok, hs, lm#191, dsl=\E[0*w, fsl=\E[1;1!w, is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, tsl=\E[2;1!w\E[;%p1%dH\E[2K, avt|avt-s|concept-avt|avt w/80 columns, use=avt+s, use=avt-ns, avt-rv|avt-rv-s|avt reverse video w/sl, flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt+s, use=avt-ns, avt-w|avt-w-s|concept avt 132 cols+status, is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, avt-w-rv|avt-w-rv-s|avt wide+status+rv, flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, #### Contel Business Systems. # # Contel c300 and c320 terminals. contel300|contel320|c300|Contel Business Systems C-300 or C-320, am, in, xon, cols#80, lines#24, xmc#1, bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, # Contel c301 and c321 terminals. contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, use=contel300, #### Data General (dg) # # According to James Carlson writing in January 1995, # the terminals group at Data General was shut down in 1991; all these # terminals have thus been discontinued. # # DG terminals have function keys that respond to the SHIFT and CTRL keys, # e.g., SHIFT-F1 generates a different code from F1. To number the keys # sequentially, first the unmodified key codes are listed as F1 through F15. # Then their SHIFT versions are listed as F16 through F30, their CTRL versions # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as # F46 through F60. This is done in the private "includes" below whose names # start with "dgkeys+". # # DG terminals generally support 8 bit characters. For each of these terminals # two descriptions are supplied: # 1) A default description for 8 bits/character communications, which # uses the default DG international character set and keyboard codes. # 2) A description with suffix "-7b" for 7 bits/character communications. # This description must use the NON-DEFAULT native keyboard language. # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), # Ctrl/Shift fdkeys (kf34-kf44). dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, kf11=\233011z, kf12=\233012z, kf13=\233013z, kf14=\233014z, kf15=\233000z, kf16=\233101z, kf17=\233102z, kf18=\233103z, kf19=\233104z, kf2=\233002z, kf20=\233105z, kf21=\233106z, kf22=\233107z, kf23=\233108z, kf24=\233109z, kf25=\233110z, kf26=\233111z, kf27=\233112z, kf28=\233113z, kf29=\233114z, kf3=\233003z, kf30=\233100z, kf31=\233201z, kf32=\233202z, kf33=\233203z, kf34=\233204z, kf35=\233205z, kf36=\233206z, kf37=\233207z, kf38=\233208z, kf39=\233209z, kf4=\233004z, kf40=\233210z, kf41=\233211z, kf42=\233212z, kf43=\233213z, kf44=\233214z, kf45=\233200z, kf46=\233301z, kf47=\233302z, kf48=\233303z, kf49=\233304z, kf5=\233005z, kf50=\233305z, kf51=\233306z, kf52=\233307z, kf53=\233308z, kf54=\233309z, kf55=\233310z, kf56=\233311z, kf57=\233312z, kf58=\233313z, kf59=\233314z, kf6=\233006z, kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, khome=\233H, kprt=\233i, dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, kf9=\E[009z, khome=\E[H, kprt=\E[i, dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, kf9=^^y, khome=^H, dgkeys+15|Private entry describing 15 DG mode special keys, kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, kf9=^^y, # Data General color terminals use the "Tektronix" color model. The total # number of colors varies with the terminal model, as does support for # attributes used in conjunction with color. # Removed u7, u8 definitions since they conflict with tack: # Preserve user-defined colors in at least some cases. # u7=^^Fh, # Default is ACM mode. # u8=^^F}20^^Fi^^F}21, # dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, bce, colors#16, ncv#53, pairs#256, op=\036Ad\036Bd, setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, dg+fixed|Fixed color info for DG D430C terminals in DG mode, use=dgunix+fixed, # Video attributes are coordinated using static variables set by "sgr", then # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. # (D=dim, U=underline, B=blink, R=reverse.) dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, bce, colors#8, ncv#16, pairs#64, op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, dg+color|Color info for Data General D470C terminals in ANSI mode, colors#16, ncv#53, pairs#256, setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, use=dg+color8, dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, bce, colors#8, ncv#16, pairs#64, op=\036Ad\036Bd, setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, dgmode+color|Color info for Data General D470C terminals in DG mode, colors#16, pairs#256, setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, use=dgmode+color8, dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, bce, ccc, colors#52, ncv#53, pairs#26, initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X, oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, scp=\036RG2%p1%02X, # Colors are in the order: normal, reverse, dim, dim + reverse. dg+ccc|Configurable color info for DG D430C terminals in DG mode, bce, ccc, colors#52, ncv#53, pairs#26, initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, # The generic DG terminal type (an 8-bit-clean subset of the 6053) # Initialization string 1 sets: # ^R - vertical scrolling enabled # ^C - blinking enabled dg-generic|Generic Data General terminal in DG mode, am, bw, msgr, xon, cols#80, lines#24, bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, smul=^T, use=dgkeys+11, # According to the 4.4BSD termcap file, the dg200 should be the # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, # maybe they were originally nuls (which would fit). dg200|data general dasher 200, OTbs, am, bw, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, smso=^^D, smul=^T, # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL dg210|dg-ansi|Data General 210/211, am, cols#80, lines#24, OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m, smul=\E[4;m, # From: Peter N. Wan # courtesy of Carlos Rucalde of Vantage Software, Inc. # (dg211: this had ., which was an ancient termcap hangover. # I suspect the d200 function keys actually work on the dg211, check it out.) dg211|Data General d211, cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, # dg450 from Cornell (not official) dg450|dg6134|data general 6134, cub1@, cuf1=^X, use=dg200, # Not official... # Note: lesser Dasher terminals will not work with vi because vi insists upon # having a command to move straight down from any position on the bottom line # and scroll the screen up, or a direct vertical scroll command. The 460 and # above have both, the D210/211, for instance, has neither. We must use ANSI # mode rather than DG mode because standard UNIX tty drivers assume that ^H is # backspace on all terminals. This is not so in DG mode. # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the # grounds that there is no matching ":ml:" dg460-ansi|Data General Dasher 460 in ANSI-mode, OTbs, am, msgr, ul, cols#80, it#8, lines#24, OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05, sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m, sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR, u7=\E[6n, u8=\E[5n, u9=\E[0n, # From: Wayne Throop (not official) # Data General 605x # Ought to work for a Model 6242, Type D210 as well as a 605x. # Note that the cursor-down key transmits ^Z. Job control users, beware! # This also matches a posted description of something called a `Dasher 100' # so there's a dg100 alias here. # (dg6053: the 4.4BSD file had , , . -- esr) dg6053-old|dg100|data general 6053, OTbs, am, bw, ul, cols#80, lines#24, OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, smul=^T, # (Some performance can be gained over the generic DG terminal type) dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, xon@, home=^P\0\0, ll=^P\0^W, use=dg-generic, # Like 6053, but adds reverse video and more keypad and function keys. d200|d200-dg|Data General DASHER D200, bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15, use=dg6053, # DASHER D210 series terminals in ANSI mode. # Reverse video, no insert/delete character/line, 7 bits/character only. # # Initialization string 1 sets: # <0 - scrolling enabled # <1 - blink enabled # <4 - print characters regardless of attributes d210|d214|Data General DASHER D210 series, am, bw, msgr, xon, cols#80, lines#24, bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m, sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, # DASHER D210 series terminals in DG mode. # Like D200, but adds clear to end-of-screen and needs XON/XOFF. d210-dg|d214-dg|Data General DASHER D210 series in DG mode, xon, ed=^^FF, use=d200-dg, # DASHER D211 series terminals in ANSI mode. # Like the D210, but with 8-bit characters and local printer support. # # Initialization string 2 sets: # \E[2;1;1;1v # 2;1 - 8 bit operations # 1;1 - 8 bit (international) keyboard language # \E(B - default primary character set (U.S. ASCII) # \E)4 - default secondary character set (international) # ^O - primary character set # d211|d215|Data General DASHER D211 series, km, is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, use=d210, # Initialization string 2 sets: # \E[2;0;1;0v # 2;0 - 7 bit operations # 1;0 - 7 bit (native) keyboard language # \E(0 - default character set (the keyboard native language) # ^O - primary character set d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, km@, is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, # Like the D210 series, but adds support for 8-bit characters. # # Reset string 2 sets: # ^^N - secondary character set # ^^FS0> - 8 bit international character set # ^^O - primary character set # ^^FS00 - default character set (matching the native keyboard language) # d211-dg|d215-dg|Data General DASHER D211 series in DG mode, km, rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, use=d211-dg, # Enhanced DG mode with changes to be more UNIX compatible. d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, mc5i, it#8, acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, rs2=\036N\036FS0E\036O\036FS00, sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, lines#25, is3=\036Fz2, use=d216+, d217-unix|Data General DASHER D217 in DG-UNIX mode, use=d216-unix, d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, use=d216-unix-25, # DASHER D220 color terminal in ANSI mode. # Like the D470C but with fewer colors and screen editing features. # # Initialization string 1 sets: # \E[<0;<1;<4l # <0 - scrolling enabled # <1 - blink enabled # <4 - print characters regardless of attributes # \E[m - all attributes off # Reset string 1 sets: # \Ec - initial mode defaults (RIS) # d220|Data General DASHER D220, mc5i@, dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c, d220-7b|Data General DASHER D220 in 7 bit mode, mc5i@, dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c-7b, # Initialization string 3 sets: # - default cursor (solid rectangle) # Reset string 2 sets: # ^^N - secondary character set # ^^FS0> - 8 bit international character set # ^^O - primary character set # ^^FS00 - default character set (matching the native keyboard language) # d220-dg|Data General DASHER D220 color terminal in DG mode, mc5i@, dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, use=d470c-dg, # DASHER D230C color terminal in ANSI mode. # Like the D220 but with minor ANSI compatibility improvements. # d230c|d230|Data General DASHER D230C, blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, smul=\E[4;50m, use=dgkeys+7b, use=d220, d230c-dg|d230-dg|Data General DASHER D230C in DG mode, use=d220-dg, # DASHER D400/D450 series terminals. # These add intelligent features like insert/delete to the D200 series. # # Initialization string 2 sets: # ^^FQ2 - default cursor (solid rectangle) # ^^FW - character protection disabled # ^^FJ - normal (80 column) mode # ^^F\^ - horizontal scrolling enabled (for alignment) # ^^FX004? - margins at columns 0 and 79 # ^^F] - horizontal scrolling disabled # ^^O - primary character set # ^^FS00 - default character set (the keyboard native language) # - (should reset scrolling regions, but that glitches the screen) # Reset string 1 sets: # ^^FA - all terminal defaults except scroll rate # Reset string 2 sets: # ^^F] - horizontal scrolling disabled # ^^FT0 - jump scrolling # d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, mc5i, acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, cnorm=\036FQ2, dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, ich1=^^J, il1=^^FH, is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA, rs2=\036F]\036FT0, sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, sgr0=\017\025\035\036E\036O, smacs=^^N, vpa=\020\177%p1%c, use=d210-dg, # DASHER D410/D460 series terminals in ANSI mode. # These add a large number of intelligent terminal features. # # Initialization string 1 sets: # \E[<0;<1;<2;<4l # <0 - scrolling enabled # <1 - blink enabled # <2 - horizontal scrolling enabled (for alignment) # <4 - print characters regardless of attributes # \E[5;0v - normal (80 column) mode # \E[1;1;80w - margins at columns 1 and 80 # \E[1;6;<2h # 1 - print all characters even if protected # 6 - character protection disabled # <2 - horizontal scrolling disabled # - (should reset scrolling regions, but that glitches the screen) # # Initialization string 2 sets: # \E[3;2;2;1;1;1v # 3;2 - default cursor (solid rectangle) # 2;1 - 8 bit operations # 1;1 - international keyboard language # \E(B - default primary character set (U.S. ASCII) # \E)4 - default secondary character set (international) # ^O - primary character set # # Reset string 1 sets: # \Ec - initial mode defaults (RIS) # \E[<2h - horizontal scrolling disabled # # Reset string 2 sets: # \E[4;0;2;1;1;1v # 4;0 - jump scrolling # 2;1 - 8 bit operations # 1;1 - 8 bit (international) keyboard language # \E(B - default primary character set (U.S. ASCII) # \E)4 - default secondary character set (international) # d410|d411|d460|d461|Data General DASHER D410/D460 series, mc5i, acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, rs2=\E[4;0;2;1;1;1v\E(B\E)4, sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;, sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, # Initialization string 2 sets: # \E[3;2;2;0;1;0v # 3;2 - default cursor (solid rectangle) # 2;0 - 7 bit operations # 1;0 - 7 bit (native) keyboard language # \E(0 - default character set (the keyboard native language) # ^O - primary character set # # Reset string 2 sets: # \E[4;0;2;0;1;0v # 4;0 - jump scrolling # 2;0 - 7 bit operations # 1;0 - 7 bit (native) keyboard language # \E(0 - default character set (the keyboard native language) # d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, km@, enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, rs2=\E[4;0;2;0;1;0v\E(0, sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, km, enacs@, rmacs=\036FS00, sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, use=d400-dg, # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. # # Initialization string 1 sets: # \E[<0;<1;<2;<4l # <0 - scrolling enabled # <1 - blink enabled # <2 - horizontal scrolling enabled (for alignment) # <4 - print characters regardless of attributes # \E[5;1v - compressed (135 column) mode # \E[1;1;126 - margins at columns 1 and 126 # \E[1;6;<2h # 1 - print all characters even if protected # 6 - character protection disabled # <2 - horizontal scrolling disabled # - (should reset scrolling regions, but that glitches the screen) # # Reset string 1 sets: # \Ec - initial mode defaults (RIS) # \E[5;1v - compressed (135 column) mode # \E[1;1;126w - margins at columns 1 and 126 # \E[<2h - horizontal scrolling disabled # d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, cols#126, is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, cols#126, is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, use=d410-dg, # These add intelligent features like scrolling regions. d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, vpa=\036FPFF%p1%2.2X, wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d216+, d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, cols#132, is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, rs2=\036P@1\036FK\036FX0083, wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, use=d412-unix, d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, lines#25, is3=\036Fz2, wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d462+, d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, eslok, hs, clear=\036FG\036PH, fsl=\036F}01\022, is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, tsl=\036F}00\036FP%p1%2.2X18\036PG, wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, use=d462+, # Relative cursor motions are confined to the current window, # which is not what the scrolling region specification expects. # Thus, relative vertical cursor positioning must be deleted. d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, cud1@, cuu1@, ll@, use=d462+, d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, use=d412-unix, d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, use=d412-unix-w, d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, use=d412-unix-25, d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, use=d412-unix-s, d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, use=d412-unix-sr, d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, use=d413-unix, d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, use=d413-unix-w, d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, use=d413-unix-25, d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, use=d413-unix-s, d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, use=d413-unix-sr, d430c-dg|d430-dg|Data General D430C in DG mode, use=d413-dg, use=dg+fixed, d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, use=d413-dg, use=dg+ccc, d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, use=d413-unix, use=dgunix+fixed, d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, use=d413-unix-w, use=dgunix+fixed, d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, use=d413-unix-25, use=dgunix+fixed, d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, use=d413-unix-s, use=dgunix+fixed, d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, use=d413-unix-sr, use=dgunix+fixed, d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, use=d413-unix, use=dgunix+ccc, d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, use=d413-unix-w, use=dgunix+ccc, d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, use=d413-unix-25, use=dgunix+ccc, d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, use=d413-unix-s, use=dgunix+ccc, d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, use=d413-unix-sr, use=dgunix+ccc, # DASHER D470C color terminal in ANSI mode. # Like the D460 but with 16 colors and without a compressed mode. # # Initialization string 1 sets: # \E[<0;<1;<2;<4l # <0 - scrolling enabled # <1 - blink enabled # <2 - horizontal scrolling enabled (for alignment) # <4 - print characters regardless of attributes # \E[1;1;80w - margins at columns 1 and 80 # \E[1;6;<2h # 1 - print all characters even if protected # 6 - character protection disabled # <2 - horizontal scrolling disabled # - (should reset scrolling regions, but that glitches the screen) # d470c|d470|Data General DASHER D470C, is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, use=dg+color, use=d460, d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;, use=dg+color, use=d460-7b, # Initialization string 2 sets: # ^^FQ2 - default cursor (solid rectangle) # ^^FW - character protection disabled # ^^F\^ - horizontal scrolling enabled (for alignment) # ^^FX004? - margins at columns 0 and 79 # ^^F] - horizontal scrolling disabled # ^^O - primary character set # ^^FS00 - default character set (the keyboard native language) # - (should reset scrolling regions, but that glitches the screen) # d470c-dg|d470-dg|Data General DASHER D470C in DG mode, is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, use=dgmode+color, use=d460-dg, # DASHER D555 terminal in ANSI mode. # Like a D411, but has an integrated phone. d555|Data General DASHER D555, use=d411, d555-7b|Data General DASHER D555 in 7-bit mode, use=d411-7b, d555-w|Data General DASHER D555 in wide mode, use=d411-w, d555-7b-w|Data General DASHER D555 in wide 7-bit mode, use=d411-7b-w, d555-dg|Data General DASHER D555 series in DG mode, use=d411-dg, # DASHER D577 terminal in ANSI mode. # Like a D411, but acts as a keyboard for serial printers ("KSR" modes). d577|Data General DASHER D577, use=d411, d577-7b|Data General DASHER D577 in 7-bit mode, use=d411-7b, d577-w|Data General DASHER D577 in wide mode, use=d411-w, d577-7b-w|Data General DASHER D577 in wide 7-bit mode, use=d411-7b-w, d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, use=d411-dg, # DASHER D578 terminal. # Like a D577, but without compressed mode; like a D470C in this respect. # # Initialization string 1 sets: # \E[<0;<1;<2;<4l # <0 - scrolling enabled # <1 - blink enabled # <2 - horizontal scrolling enabled (for alignment) # <4 - print characters regardless of attributes # \E[1;1;80w - margins at columns 1 and 80 # \E[1;6;<2h # 1 - print all characters even if protected # 6 - character protection disabled # <2 - horizontal scrolling disabled # - (should reset scrolling regions, but that glitches the screen) # d578|Data General DASHER D578, is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, d578-7b|Data General DASHER D578 in 7-bit mode, is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, #### Datamedia (dm) # # Datamedia was headquartered in Nashua, New Hampshire until it went # out of business in 1993, but the ID plates on the terminals referred # to the factory in Pennsauken, NJ. The factory was sold to a PCB board # manufacturer which threw out all information about the terminals. # cs10|colorscan|Datamedia Color Scan 10, msgr, cols#80, lines#24, bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, cs10-w|Datamedia Color Scan 10 with 132 columns, cols#132, cup=\E[%i%p1%02d;%p2%03dH, use=cs10, # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) dm1520|dm1521|datamedia 1520, OTbs, am, xenl, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, khome=^Y, # dm2500: this terminal has both and . Applications using # termcap/terminfo directly (rather than through ncurses) might be confused. dm2500|datamedia2500|datamedia 2500, OTbs, OTnc, cols#80, lines#24, bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, dch1=\020\010\030\035$<10*>, dl1=\020\032\030\035$<10*>, el=^W, home=^B, ich1=\020\034\030\035$<10*>, il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], smdc=^P, smir=^P, smso=^N, # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) # also, has a meta-key. # From: # (dmchat: ":MT:" changed to ":km:" -- esr) dmchat|dmchat version of datamedia 2500, km, dl1=\020\032\030\035$<2/>, il1=\020\n\030\035\030\035$<1*/>, use=dm2500, # (dm3025: ":MT:" changed to ":km:" -- esr) dm3025|datamedia 3025a, OTbs, km, cols#80, it#8, lines#24, bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, smir=\EP, smso=\EO1, dm3045|datamedia 3045a, OTbs, am, eo, km@, ul, xenl, dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, use=dm3025, # Datamedia DT80 soft switches: # 1 0=Jump 1=Smooth # Autorepeat 0=off 1=on # Screen 0=Dark 1=light # Cursor 0=u/l 1=block # # 2 Margin Bell 0=off 1=on # Keyclick 0=off 1=on # Ansi/VT52 0=VT52 1=Ansi # Xon/Xoff 0=Off 1=On # # 3 Shift3 0=Hash 1=UK Pound # Wrap 0=Off 1=On # Newline 0=Off 1=On # Interlace 0=Off 1=On # # 4 Parity 0=Odd 1=Even # Parity 0=Off 1=On # Bits/Char 0=7 1=8 # Power 0=60Hz 1=50Hz # # 5 Line Interface 0=EIA 1=Loop # Aux Interface 0=EIA 1=Loop # Local Copy 0=Off 1=On # Spare # # 6 Aux Parity 0=Odd 1=Even # Aux Parity 0=Off 1=On # Aux Bits/Char 0=7 1=8 # CRT Saver 0=Off 1=On # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. dm80|dmdt80|dt80|datamedia dt80/1, clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, use=vt100, # except in 132 column mode, where it needs a little padding. # This is still less padding than the vt100, and you can always turn on # the ^S/^Q handshaking, so you can use vt100 flavors for things like # reverse video. dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, cols#132, clear=\E[H\E[2J$<50/>, cud1=^J, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, # From: Adam Thompson Sept 10 1995 dt80-sas|Datamedia DT803/DTX for SAS usage, am, bw, cols#80, lines#24, acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, bel=^G, clear=^L, cr=^M, csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, cub1=^H, cud1=\EB, cuf1=^\, cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, smso=\E$2\004, tbc=\E'0, # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL # These aren't end-all Excel termcaps; but do insert/delete char/line # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) # The naming convention has been bent somewhat, with the use of E? (where # E is for 'Excel') as # a name. This was done to distinguish the entries # from the other Datamedias in use here, and yet to associate a model of # the Excel terminals with the regular datamedia terminals that share # major characteristics. excel62|excel64|datamedia Excel 62, dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, use=dt80, excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, use=dt80w, excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, use=dt80, #### Falco # # Falco Data Products # 440 Potrero Avenue # Sunnyvale, CA 940864-196 # Vox: (800)-325-2648 # Fax: (408)-745-7860 # Net: techsup@charm.sys.falco.com # # Current Falco models as of 1995 are generally ANSI-compatible and support # emulations of DEC VT-series, Wyse, and Televideo types. # # Test version for Falco ts-1. See for info # This terminal was released around 1983 and was discontinued long ago. # The standout and underline highlights are the same. falco|ts1|ts-1|falco ts-1, OTbs, am, cols#80, it#8, lines#24, bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smir=\Eq, smso=\Eg1, smul=\Eg1, falco-p|ts1p|ts-1p|falco ts-1 with paging option, OTbs, am, da, db, mir, msgr, ul, cols#80, it#8, lines#24, bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, smso=\Eg4, smul=\Eg1, # (ts100: I added / based on the init string -- esr) ts100|ts100-sp|falco ts100-sp, am, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=vt100+fnkeys, ts100-ctxt|falco ts-100 saving context, rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, #### Florida Computer Graphics # # Florida Computer Graphics Beacon System, using terminal emulator program # "host.com", as provided by FCG. This description is for an early release # of the "host" program. Known bug: clears the whole screen, so it's # commented out. # From: David Bryant 1/7/83 beacon|FCG Beacon System, am, da, db, cols#80, lines#32, bel=\ESTART\r\E37\r\EEND\r$<1>, blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, cub1=^H, cud1=^J, cuf1=\EV, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, rmul=\ESTART\r\E60\,0\r\EEND\r, sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, smso=\ESTART\r\E70\,6\r\EEND\r$<20>, smul=\ESTART\r\E60\,1\r\EEND\r, #### Fluke # # The f1720a differences from ANSI: no auto margin, destructive # tabs, # of lines, funny highlighting and underlining f1720|f1720a|fluke 1720A, xt, cols#80, lines#16, xmc#1, bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, #### Liberty Electronics (Freedom) # # Liberty Electronics # 48089 Fremont Blvd # Fremont CA 94538 # Vox: (510)-623-6000 # Fax: (510)-623-7021 # From: # (f100: added empty to suppress a tic warning; # made this relative to adm+sgr -- note that isn't # known to work for f100 but does on the f110. --esr) f100|freedom|freedom100|freedom model 100, OTbs, am, bw, hs, mir, msgr, xon, cols#80, lines#24, acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, f100-rv|freedom-rv|freedom 100 in reverse video, flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, # The f110 and f200 have problems with vi(1). They use the ^V # code for the down cursor key. When kcud1 is defined in terminfo # as ^V, the Control Character Quoting capability (^V in insert mode) # is lost! It cannot be remapped in vi because it is necessary to enter # a ^V to to quote the ^V that is being remapped!!! # # f110/f200 users will have to decide whether # to lose the down cursor key or the quoting capability. We will opt # initially for leaving the quoting capability out, since use of VI # is not generally applicable to most interactive applications # (f110: added , & from f100 -- esr) f110|freedom110|Liberty Freedom 110, bw@, eslok, it#8, wsl#80, blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, smso=\EG<, tsl=\Ef, use=f100, f110-14|Liberty Freedom 110 14inch, dch1@, use=f110, f110-w|Liberty Freedom 110 - 132 cols, cols#132, use=f110, f110-14w|Liberty Freedom 110 14in/132 cols, cols#132, dch1@, use=f110, # (f200: added to suppress tic warnings re / --esr) f200|freedom200|Liberty Freedom 200, OTbs, am, eslok, hs, mir, msgr, xon, cols#80, it#8, lines#24, wsl#80, acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, clear=^Z, cnorm=\E.1, cr=^M, csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, flash=\Eo$<200/>\En, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, f200-w|Liberty Freedom 200 - 132 cols, cols#132, use=f200, # The f200 has the ability to reprogram the down cursor key. The key is # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, # so powering the terminal off and on will not cause the change to be lost. f200vi|Liberty Freedom 200 for vi, flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, f200vi-w|Liberty Freedom 200 - 132 cols for vi, cols#132, use=f200vi, #### GraphOn (go) # # Graphon Corporation # 544 Division Street # Campbell, CA 95008 # Vox: (408)-370-4080 # Fax: (408)-370-5047 # Net: troy@graphon.com (Troy Morrison) # # # The go140 and go225 have been discontinued. GraphOn now makes X terminals, # including one odd hybrid that starts out life on power-up as a character # terminal, than can be switched to X graphics mode (driven over the serial # line) by an escape sequence. No info on this beast yet. # (go140: I added / based on the init string -- esr) go140|graphon go-140, OTbs, cols#80, it#8, lines#24, clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J$<10/>, el=\E[K, ht=^I, if=/usr/share/tabset/vt100, il1=\E[L, is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, go140w|graphon go-140 in 132 column mode, am, cols#132, is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140, # Hacked up vt200 termcap to handle GO-225/VT220 # From: # (go225: I added / based on the init string -- esr) go225|go-225|Graphon 225, OTbs, am, mir, xenl, cols#80, it#8, lines#25, vt#3, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, #### Harris (Beehive) # # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. # Their terminal group is ancient history now (1995) though the parent # company is still in business. # # Beehive documentation is undated and marked Preliminary and has no figures # so we must have early Superbee2 (Model 600, according to phone conversation # with mfr.). It has proved reliable except for some missing padding # (notably after \EK and at bottom of screen). # # The key idea is that AEP mode is poison for & that US's in # the local memory should be avoided like the plague. That means # that the 2048 character local buffer is used as 25 lines of 80 # characters, period. No scrolling local memory, folks. It also # appears that we cannot use naked INS LINE feature since it uses # US. The sbi fakes with an 80-space insert that may be too # slow at low speeds; also spaces get converted to \040 which is # too long for some programs (not vi). DEL LINE is ok but slow. # # The string is designed for last line of screen ONLY; cup to # 25th line corrects the motion inherent in scrolling to Page 1. # # There is one understood bug. It is that the screen appears to # pop to a new (blank) page after a , or leave a half-line # ellipsis to a quad that is the extra 48 memory locations. The # data received is dumped into memory but not displayed. Not to # worry if is being used; the lines not displayed will be, # whenever the cursor is moved up there. Since is addressed # relative to MEMORY of window, nothing is lost; but beware of # relative cursor motion (,,,). Recommended, # therefore, is setenv MORE -c . # # WARNING: Not all features tested. # # Timings are assembled from 3 sources. Some timings may reflect # SB2/Model 300 that were used if more conservative. # Tested on a Model 600 at 1200 and 9600 bd. # # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly # placed on the keyboard and useless because of AEP, is made # into a backspace key. In use ESC must be pressed twice (to send) # and sending ^C must be prefixed by ESC to avoid that weird # transmit mode associated with ENTER key. # # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across # the screen, then it has dropped into ENTER mode; hit # RESET--ONLINE--!tset. # # As delivered this machine has a FATAL feature that will throw # it into that strange transmit state (SPOW) if the space bar is # hit after a CR is received, but before receiving a LF (or a # few others). # # The circuits MUST be modified to eliminate the SPOW latch. # This is done by strapping on chip A46 of the I/O board; cut # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that # chip. This mod has been checked out on a Mod 600 of Superbee II. # With this modification absurdly high timings on cr are # unnecessary. # # NOTE WELL that the rear panel switch should be set to CR/LF, # not AEP! # sb1|beehive superbee, OTbs, am, bw, da, db, mir, ul, xsb, cols#80, lines#25, xmc#1, bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>, ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO, krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, smso=\E_1, smul=\E_0, tbc=\E3, sbi|superbee|beehive superbee at Indiana U., xsb, cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sb1, # Alternate (older) description of Superbee - f1=escape, f2=^C. # Note: there are at least 3 kinds of superbees in the world. The sb1 # holds onto escapes and botches ^C's. The sb2 is the best of the 3. # The sb3 puts garbage on the bottom of the screen when you scroll with # the switch in the back set to CRLF instead of AEP. This description # is tested on the sb2 but should work on all with either switch setting. # The f1/f2 business is for the sb1 and the can be taken out for # the other two if you want to try to hit that tiny escape key. # This description is tricky: being able to use cup depends on there being # 2048 bytes of memory and the hairy string. superbee-xsb|beehive super bee, am, da, db, xsb, cols#80, it#8, lines#25, clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J, cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, home=\EH, ht=^I, hts=\E1, ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, # This loses on lines > 80 chars long, use at your own risk superbeeic|super bee with insert char, ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, sb2|sb3|fixed superbee, xsb@, use=superbee, #### Beehive Medical Electronics # # Steve Seymour writes (Wed, 03 Feb 1999): # Regarding your question though; Beehive terminals weren't made by Harris. # They were made by Beehive Medical Electronics in Utah. They went out of # business in the early '80s. # # (OK, then, I don't know why a couple of these say "harris beehive".) # # Reports are that most of these Beehive entries (except superbee) have not # been tested and do not work right. is a trouble spot. Be warned. # (bee: was empty, which is obviously bogus -- esr) beehive|bee|harris beehive, OTbs, am, mir, cols#80, lines#24, cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, smir=\EQ, smso=\EdP, smul=\Ed`, # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. # good grief - does this entry make :sg:/:ug: when it doesn't have to? # look at those spaces in /. Seems strange to me... # (beehive: removed, no such file. If you # really care, cook up one using ^F -- esr) beehive3|bh3m|beehiveIIIm|harris beehive 3m, OTbs, am, cols#80, it#8, lines#20, bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s, beehive4|bh4|beehive 4, am, cols#80, lines#24, bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, # There was an early Australian kit-built computer called a "Microbee". # It's not clear whether this is for one of those or for a relative # of the Beehive. microb|microbee|micro bee series, OTbs, am, cols#80, it#8, lines#24, bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, # 8675, 8686, and bee from Cyrus Rahman # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) ha8675|harris 8675, is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H, kf8=\177, kf9=\Ee, use=bee, # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation # in :is: -- esr) ha8686|harris 8686, is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003, kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003, kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003, kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(, use=bee, #### Hazeltine # # Hazeltine appears to be out of the terminal business as of 1995. These # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with # Harris. They have a hazeltine.com domain (but no web page there ) and can # be reached at: # # Hazeltine # 450 East Pulaski Road # Greenlawn, New York 11740 # # As late as 1993, manuals for the terminal product line could still be # purchased from: # # TRW Customer Service Division # 15 Law Drive # P.O. Box 2076 # Fairfield, NJ 07007-2078 # # They're now (1998) a subsidiary of General Electric, operating under the # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page # at . # # Since is blank, when you want to erase something you # are out of luck. You will have to do ^L's a lot to # redraw the screen. h1000 is untested. It doesn't work in # vi - this terminal is too dumb for even vi. (The code is # there but it isn't debugged for this case.) hz1000|hazeltine 1000, OTbs, cols#80, lines#12, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K, ind=^J, # From: Thu Aug 20 09:09:18 1981 hz1420|hazeltine 1420, OTbs, am, cols#80, lines#24, bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, smso=\E^_, # New "safe" cursor movement (11/87) from . Prevents # freakout with out-of-range args and tn3270. No hz since it needs to # receive tildes. hz1500|hazeltine 1500, OTbs, am, hz, cols#80, lines#24, bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P, kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, # h1510 assumed to be in sane escape mode. Else use h1500. # (h1510: early versions of this entry apparently had ", # , but these caps were commented out in 8.3; also, # removed incorrect and overridden ":do=^J:" -- esr) hz1510|hazeltine 1510, OTbs, am, cols#80, lines#24, bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, el=\E^O, il1=\E^Z, ind=^J, # Hazeltine 1520 # The following switch settings are assumed for normal operation: # FULL CR U/L_CASE ESCAPE # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON # Other switches may be set for operator convenience or communication # requirements. hz1520|Hazeltine 1520, OTbs, am, bw, msgr, cols#80, lines#24, bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, # This version works with the escape switch off # (h1520: removed incorrect and overridden ":do=^J:" -- esr) hz1520-noesc|hazeltine 1520, am, hz, cols#80, lines#24, bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, # Note: the h1552 appears to be the first Hazeltine terminal which # is not braindamaged. It has tildes and backprimes and everything! # Be sure the auto lf/cr switch is set to cr. hz1552|hazeltine 1552, OTbs, cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, lf2=red, lf3=green, use=vt52, hz1552-rv|hazeltine 1552 reverse video, cud1=^J, rmso=\ET, smso=\ES, use=hz1552, # Note: h2000 won't work well because of a clash between upper case and ~'s. hz2000|hazeltine 2000, OTbs, OTnc, am, cols#74, lines#27, bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J, cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, il1=~\032$<6>, ind=^J, pad=\177, # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: # I tested this termcap entry for the Hazeltine Esprit with vi. It seems # to work ok. There is one problem though if one types a lot of garbage # characters very fast vi seems not able to keep up and hangs while trying # to insert. That's in insert mode while trying to insert in the middle of # a line. It might be because the Esprit doesn't have insert char and delete # char as a built in function. Vi has to delete to end of line and then # redraw the rest of the line. esprit|Hazeltine Esprit I, OTbs, am, bw, cols#80, lines#24, bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J, kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J, kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R, lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, esprit-am|hazeltine esprit auto-margin, am, use=esprit, # Hazeltine Modular-1 from Cliff Shackelton via BRL # Vi it seems always wants to send a control J for "do" and it turned out # that the terminal would work somewhat if the auto LF/CR was turned off. # (hmod1: removed :dn=~^K: -- esr) hmod1|Hazeltine Modular 1, OTbs, am, hz, cols#80, lines#24, bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, # # Hazeltine Executive 80 Model 30 (1554?) # from Will Martin via BRL # Like VT100, except for different "am" behavior. hazel|exec80|h80|he80|Hazeltine Executive 80, OTbs, OTpt, am, cols#80, it#8, lines#24, vt#3, OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, smul=\E[4m$<2/>, #### IBM # ibm327x|line mode IBM 3270 style, gn, clear=^M^J, el=^M, home=^M, ibm3101|i3101|IBM 3101-10, OTbs, am, xon, cols#80, lines#24, bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH, ibm3151|IBM 3151 display, is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B, sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;, sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162, # From: Mark Easter 29 Oct 1992 # removed kend, knp, kpp -TD ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, OTbs, am, mir, msgr, cols#80, it#8, lines#24, acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370, bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J, invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A, rmso=\E4@, rmul=\E4@, sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;, sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, ibm3161-C|IBM 3161-C NLS terminal using cartridge, rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161, ibm3162|IBM 3162 display, blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a, rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, use=ibm3161-C, # This really should not use setab/setaf, but it is clear that the # original terminfo does not toggle red/blue colors as in setb/setf. ibm3164|i3164|IBM 3164, msgr, colors#8, pairs#64, op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, setab=\E4 %p1%{64}%+%c, setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, smcup=\E!9/N\E>B, use=ibm3161, ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, am, bw, msgr, xon, cols#80, it#8, lines#25, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, ibmaed|IBM Experimental display, OTbs, am, eo, msgr, cols#80, it#8, lines#52, clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, rmso=\E0, sgr0=\E0, smso=\E0, ibm-apl|apl|IBM apl terminal simulator, lines#25, use=dm1520, # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) ibmmono|IBM workstation monochrome, eslok, hs, bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, use=ibm3101, ibmega|IBM Enhanced Color Display, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=ibmmono, # This color scheme is assumed in some recent IBM terminal descriptions # (green on black, emulated on a 16-color terminal). ibm+color|IBM color definitions, colors#8, ncv#3, pairs#64, op=\E[32m\E[40m, setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;, setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;, ibm+16color|IBM aixterm color definitions, colors#16, pairs#256, setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, ibm5154|IBM 5154 Color display, colors#8, ncv@, pairs#64, bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, use=ibm+color, ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, use=ibmmono, ibmvga-c|IBM VGA display color termcap, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=ibmega-c, ibmvga|IBM VGA display, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=ibmega, # ibmapa* and ibmmono entries come from ACIS 4.3 distribution rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, lines#32, dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, ibm6155|IBM 6155 Black & White display, blink@, bold@, use=ibm5151, # Advanced Monochrome (6153) and Color (6154) Graphics Display: ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, lines#31, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, lines#31, dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmega-c, ibm6154|IBM 6154 Color displays, blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, sgr0=\E[0;10m, use=ibm5154, ibm6153|IBM 6153 Black & White display, blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, sgr0=\E[0;10m, use=ibm5151, ibm6153-90|IBM 6153 Black & White display, cols#90, lines#36, blink@, bold@, use=ibm5151, ibm6153-40|IBM 6153 Black & White display, cols#40, lines#12, use=ibm6153-90, ibm8512|ibm8513|IBM color VGA Terminal, am, mir, msgr, cols#80, it#8, lines#25, acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL, il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A, kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m, rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m, use=ibm8503, hft-c|HFT with Color, colors#8, pairs#64, acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, use=ibm5151, use=ibm+color, hft-c-old|HFT with Color PC850, colors#8, pairs#64, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, use=ibm+color, hft-old|AIWS High Function Terminal, am, xon, cols#80, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color, ibm-system1|system1|ibm system/1 computer, am, xt, cols#80, lines#24, bel=^G, clear=^Z, cub1=^H, cuf1=^\, cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, ind=^J, # lft-pc850 : IBM Low Function Terminal Device # lft "supports" underline, bold, and blink in the sense that the lft code # sets all the right bits. HOWEVER, depending upon the adapter, these # attributes may or may not be supported by the device driver. lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, am, bw, msgr, xon, cols#80, it#8, lines#25, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT, rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, ibm5081|hft|IBM Megapel Color display, acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, eslok, hs, lines#33, dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c, ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, use=hft-c, ibm8514|IBM 8514/a color VGA display, eslok, hs, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, ibm8514-c|IBM 8514 color display with standout and underline, eslok, hs, lines#41, cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo, use=ibmega-c, # # AIX entries. IBM ships these with AIX 3.2.5. # -- added rc, sc based on manpage -TD # Note that we could use ibm+16color, but that is not how IBM defines this one. aixterm|IBM Aixterm Terminal Emulator, eslok, hs, acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154, aixterm-m|IBM AIXterm Monochrome Terminal Emulator, eslok, hs, acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153, aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, eslok, hs, bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, tsl=\E[?%p1%dT, use=ibm6153, jaixterm|IBM Kanji Aixterm Terminal Eemulator, acsc@, use=aixterm, jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, acsc@, use=aixterm-m, # This flavor is adapted from xterm, in turn from aixterm documentation -TD aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors, use=ibm+16color, use=aixterm, #### Infoton/General Terminal Corp. # # gt100 sounds like something DEC would come out with. Let's hope they don't. i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), OTbs, am, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, ind=^J, rmso=\Ea, smso=\Eb, i400|infoton 400, OTbs, am, cols#80, lines#25, bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A, dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, # (addrinfo: removed obsolete ":bc=^Z:" -- esr) addrinfo, am, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\, # (infoton: used to have the no-ops , , -- esr) infoton, am, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\, ed=^K, ind=^J, ll=^H^\, # The ICL6402 was actually the Kokusai Display System 6402. # The 6404 was the KDS7372 (color version of the 6402). # # ICL6404 control codes follow: # #code function #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #ctrl-A set SOM position at cursor position #ctrl-G Bell #ctrl-H Backspace #ctrl-I Horiz tab #ctrl-J Linefeed #ctrl-K Cursor up #ctrl-L Cursor right #ctrl-M Carriage return #ctrl-N Disable xon/xoff to host #ctrl-O Enable xon/xoff to host #ctrl-R Enable bidirectional mode #ctrl-T Disable bidirectional mode #ctrl-V Cursor down #ctrl-Z Clear unprotected data to insert char #ctrl-^ Cursor home #ctrl-_ Newline # #ESC lead-in char for multiple character command # #ESC space R execute power on sequence #ESC ! p1 p2 define scroll region: # p1 = scroll top line: 20h - 37h # p1 = scroll bottom line: 20h - 37h #ESC " unlock keyboard #ESC # lock keyboard #ESC $ Semi-graphics mode on #ESC % Semi-graphics mode off #ESC & protect mode on #ESC ' protect mode off #ESC ( write protect mode off (full intensity) #ESC ) write protect mode on (half intensity) # #ESC * clear screen #ESC + clear unprotected data to insert char #ESC , clear unprotected data to half intensity spaces #ESC - p1 p2 p3 p4 address cursor to page, row, column: # p1 = page number 0 - 3 # p2 = row 20h - 7fh # p3 = column (lo) 20h - 7fh # p4 = column (hi) 20h - 21h (only 132 col) #ESC . p1 set cursor style: # p1 = 0 invisible cursor # p1 = 1 block blinking cursor # p1 = 2 block steady cursor # p1 = 3 underline blinking cursor # p1 = 4 underline steady cursor #ESC / transmit cursor location (page, row, column) #ESC 0 p1 p2 p3 p4 program edit key: # p1 = edit key code: '@'-'S', '`'-'s' # p2 p3 p4 = program data (3 bytes) # #ESC 1 set tab #ESC 2 clear tab at cursor #ESC 3 clear all tabs #ESC 4 send unprotect line to cursor #ESC 5 send unprotect page to cursor #ESC 6 send line to cursor #ESC 7 send page to cursor #ESC 8 n set scroll mode: # n = 0 set jump scroll # n = 1 set smooth scroll #ESC 9 n control display: # n = 0 display off # n = 1 display on #ESC : clear unprotected data to null #ESC ; clear unprotected data to insert char # #ESC < keyclick on #ESC = p1 p2 address cursor to row, column # p1 = row 20h - 7fh # p2 = column (lo) 20h - 7fh # p3 = column (hi) 20h - 21h (only 132 col) #ESC > keyclick off #ESC ? transmit cursor location (row, column) # #ESC @ copy print mode on #ESC A copy print mode off #ESC B block mode on #ESC C block mode off (conversation mode) #ESC D F set full duplex #ESC D H set half duplex #ESC E line insert #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) # 0 = black, 1 = red, 2 = green, 3 = yellow # 4 = blue, 5 = magenta, 6 = cyan, 7 = white #ESC G n set serial field attribute (n = 30h - 3Fh) #ESC H n full graphics mode: # n = 0 exit full graphics mode # n = 1 enter full graphics mode #ESC I back tab #ESC J back page #ESC K forward page # #ESC L unformatted page print #ESC M L move window left (132 col mode only) #ESC M R move window right (132 col mode only) #ESC N set page edit (clear line edit) #ESC O set line edit (clear page edit) #ESC P formatted page print #ESC Q character insert #ESC R line delete #ESC S send message unprotected only #ESC T erase line to insert char #ESC U set monitor mode (see ESC X, ESC u) # #ESC V n select video attribute mode: # n = 0 serial field attribute mode # n = 1 parallel character attribute mode #ESC V 2 n define line attribute: # n = 0 single width single height # n = 1 single width double height # n = 2 double width single height # n = 3 double width double height #ESC V 3 n select character font: # n = 0 system font # n = 1 user defined font #ESC V 4 n select screen mode: # n = 0 page screen mode # n = 1 virtual screen mode #ESC V 5 n control mouse mode: # n = 0 disable mouse # n = 1 enable sample mode # n = 2 send mouse information # n = 3 enable request mode #ESC W character delete #ESC X clear monitor mode (see ESC U, ESC u) #ESC Y erase page to insert char # #ESC Z n send user/status line: # n = 0 send user line # n = 1 send status line # n = 2 send terminal ID #ESC [ p1 p2 p3 set character attribute (parallel char mode): # p1: 0 = normal # 1 = blank # 2 = blink # 3 = blink blank (= blank) # 4 = reverse # 5 = reverse blank # 6 = reverse blink # 7 = reverse blink blank (= reverse blank) # 8 = underline # 9 = underline blank # : = underline blink # ; = underline blink blank # < = reverse underline # = = reverse underline blank # > = reverse underline blink # ? = reverse underline blink blank # p2, p3: f/grnd, b/grnd colour # (see ESC F for colours) # use ZZ for mono, eg. # ESC [ 0 Z Z for normal # ESC [ 4 Z Z for inverse etc. # #ESC \ n set page size: # n = 1 24 lines/page # n = 2 48 lines/page # n = 3 72 lines/page # n = 4 96 lines/page #ESC ] n set Wordstar mode: # n = 0 normal (KDS7372) mode # n = 1 Wordstar mode # #ESC b set foreground colour screen # #ESC c n enter self-test mode: # n = 0 exit self test mode # n = 1 ROM test # n = 2 RAM test # n = 3 NVRAM test # n = 4 screen display test # n = 5 main/printer port test # n = 6 mouse port test # n = 7 graphics board test # n = 8 graphics memory test # n = 9 display all 'E' # n = : display all 'H' #ESC d set background colour screen # #ESC e n program insert char (n = insert char) #ESC f text CR load user status line with 'text' # #ESC g display user status line on 25th line #ESC h display system status line on 25th line #ESC i tab #ESC j reverse linefeed #ESC k n duplex/local edit mode: # n = 0 duplex edit mode # n = 1 local edit mode #ESC l n select virtual screen: # n = 0 screen 1 # n = 1 screen 2 #ESC m save current config to NVRAM #ESC n p1 select display screen: # p1 = 0 screen 1 # p1 = 1 screen 2 # p1 = 2 screen 3 # p1 = 3 screen 4 #ESC o p1 p2 set characters/line and attribute: # p1 = 0 80 chars/line # #ESC o p1 p2 set characters/line and attribute: # p1 = 0 80 chars/line # p1 = 1 132 chars/line # p2 = 0 single width single height # p2 = 1 single width double height # p2 = 2 double width single height # p2 = 3 double width double height # #ESC q insert mode on #ESC r edit mode on #ESC s send message all #ESC t erase line to null #ESC u clear monitor mode (see ESC U, ESC X) #ESC v autopage mode on #ESC w autopage mode off #ESC x p1 p2 p3 define delimiter code... #ESC y erase page to null # #ESC z 2 p1 p2 p3 p4 draw quadrangle: # p1 = starting row # p2 = starting column # p3 = end row # p4 = end column # #ESC { p1 p2 p3 p4 configure main port # (baud, stop bits, parity, word length) # #ESC | p1 p2 text Ctrl-Y program function key with 'text': # p1 = function key code: # '1' - ';' normal f1- f11 # '<' - 'F' shifted f1 - f11 # p2 = program mode: # 1 = FDX # 2 = LOC # 3 = HDX # Ctrl-Y = terminator # (use Ctrl-P to escape ^P, ^Y ) # #ESC } p1 p2 p3 p4 configure printer port # (baud, stop bits, parity, word length) #ESC ~ send system status # # Codes and info from Peter Disdale 12 May 1997 # # Entry is by esr going solely on above information and is UNTESTED. # This actually looks a lot like a Televideo 9xx. # This entry uses page 0 and is monochrome; I'm not brave enough to try # to make color work without a test terminal. The capability is a guess. # The initialization string sets conversation mode, blinking underline cursor, # full duplex, parallel attribute mode, display user status line, white # foreground, black background, normal highlight. # icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, OTbs, am, hs, cols#80, lines#24, bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1, il1=\EE, invis=\E[1ZZ, is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ, rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ, sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, rs2=\Eo1, use=icl6404, #### Interactive Systems Corp # # ISC used to sell OEMed and customized hardware to support ISC UNIX. # ISC UNIX still exists in 1995, but ISC itself is no more; they got # bought out by Sun. # # From: Wed Sep 16 08:06:44 1981 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the # ":le=^_:" later overridden -- esr) intext|Interactive Systems Corporation modified owl 1200, OTbs, am, cols#80, it#8, lines#24, xmc#1, bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J, cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%, smso=^V$\,, intext2|intextii|INTERACTIVE modified owl 1251, am, bw, ul, cols#80, lines#24, xmc#0, bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, smul=\E[18 D, #### Kimtron (abm, kt) # # Kimtron seems to be history, but as March 1998 these people are still # offering repair services for Kimtron equipment: # # Com/Pair Monitor Service # 1105 N. Cliff Ave. # Sioux Falls, South Dakota 57103 # # WATS voice: 1-800/398-4946 # POTS fax: +1 605/338-8709 # POTS voice: +1 605/338-9650 # Email: # Internet/Web: # # Kimtron entries include (undocumented) codes for: enter dim mode, # enter bold mode, enter reverse mode, turn off all attributes. # # Kimtron ABM 85 added by Dual Systems # (abm85: removed duplicated ":kd=^J:" -- esr) abm85|Kimtron ABM 85, OTbs, am, bw, msgr, cols#80, it#8, lines#24, xmc#1, cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\Ey, el=\Et, ht=^I, if=/usr/share/tabset/stdcrt, il1=\EE, is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, # Kimtron ABM 85H added by Dual Systems. # Some notes about the abm85h entries: # 1) there are several firmware revs of 85H in the world. Use abm85h-old for # firmware revs prior to SP51 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the # abm85e entry if it is in tvi920 emulation mode. They are incompatible # in some places and NOT software settable i.e., can't fix it) # 3) In 85h mode, the arrow keys and special functions transmit when # the terminal is in dup-edit, and work only locally in local-edit. # Vi won't swallow `del char' for instance, but turns on # dup-edit anyway so that the arrow keys will work right. If the # arrow keys don't work the way you like, change , , and # . Note that 920E mode does not have software commands to toggle # between dup and local edit, so you get whatever was set last on the # terminal. # 4) attribute is nice, but seems too slow to work correctly # (\Eb\Ed) # 5) Make sure `hidden' attributes are selected. If `embedded' attributes # are selected, the entry should be removed. # 6) auto new-line should be on (selectable from setup mode only) # # From: Erik Fair Sun Oct 27 07:21:05 1985 abm85h|Kimtron ABM 85H native mode, hs, xmc@, bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, fsl=^M, invis@, is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr, use=abm85, abm85e|Kimtron ABM 85H in 920E mode, xmc@, bel=^G, dim=\E), flash@, is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., xmc@, bel=^G, dim=\E), is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, # From: # (kt7: removed obsolete :ma=^V^J^L :" -- esr) kt7|kimtron model kt-7, OTbs, am, cols#80, it#8, lines#24, cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr, # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the # other kt7 entry and the adjacent key capabilities). Removed EE which is # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight # but we can't figure out what. kt7ix|kimtron model kt-7 or 70 in IX mode, am, bw, cols#80, it#8, lines#25, acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0, sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, #### Microdata/MDIS # # This was a line of terminals made by McDonnell-Douglas Information Systems. # These entries come direct from MDIS documentation. I have edited them only # to move primary names of the form p[0-9] * to aliases, and to comment out # / in a couple of entries without strings. I have # also removed the change history; the last version indicates this is # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). # # McDonnell Information Systems Terminal Family History # ========================================= # # Prism-1, Prism-2 and P99: # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25. # # Prism-4 and Prism-5: # Slightly less ancient range of Microdata terminals. Follow-on from # Prism-2, but with many enhancements. P5 has eight display pages. # # Prism-6: # A special terminal for use with library systems, primarily in Germany. # Limited numbers. Similar functionality to P5 (except attributes?). # # Prism-7, Prism-8 and Prism-9: # More recent range of MDIS terminals, in which P7 and P8 # replace the P4 & P5, with added functionality, and P9 is the flagship. # The P9 has two emulation modes - P8 and ANSI - and includes a # large number of the DEC VT220 control sequences. Both # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. # # Prism-12 and Prism-14: # Latest range, functionally very similar to the P9. The P14 has a # black-on-white overscanning screen. # # The terminfo definitions given here are: # # p2 - Prism-2 (or Prism-1 or P99). # # p4 - Prism-4 (and older P7s & P8s). # p5 - Prism-5 (or Prism-6). # # p7 - Prism-7. # p8 - Prism-8 (in national or multinational mode). # p8-w - 132 column version of p8. # p9 - Prism-9 in ANSI mode. # p9-w - 132 column version of p9. # p9-8 - Prism-9 in Prism-8 emulation mode. # p9-8-w - As p9-8, but with 132 columns. # # p12 - Prism-12 in ANSI mode. # p12-w - 132 column version of p12. # p12-m - Prism-12 in MDC emulation mode. # p12-m-w - As p12-m, but with 132 columns. # p14 - Prism-14 in ANSI mode. # p14-w - 132 column version of p14. # p14-m - Prism-14 in MDC emulation mode. # p14-m-w - As p14-m, but with 132 columns. # # p2: Prism-2 # ----------- # # Includes Prism-1 and basic P99 without SP or MP loaded. # The simplest form of Prism-type terminal. # Basic cursor movement and clearing operations only. # No video attributes. # Notes: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next # value up, followed by backspace. # prism2|MDC Prism-2, am, bw, msgr, cols#80, lines#24, bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, cuu1=^Z, ed=\EJ, el=\EK, home=^A, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, # p4: Prism-4 # ----------- # # Includes early versions of P7 & P8. # Basic family definition for most Prisms (except P2 and P9 ANSI). # Notes: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next # value up, followed by backspace. # Cursor key definitions removed because they interfere with vi and csh keys. # prism4|p4|P4|MDC Prism-4, am, bw, hs, mc5i, msgr, cols#80, lines#24, wsl#72, xmc#1, bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>, cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, fsl=^]\345, home=^A, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, rev=^CD, rmso=^C\s, rmul=^C\s, sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343, vpa=\013%p1%{32}%+%c, # p5: Prism-5 # ----------- # # Same definition as p4. Includes Prism-6 (not tested!). # Does not use any multi-page features. # prism5|p5|P5|MDC Prism-5, use=p4, # p7: Prism-7 # ----------- # # Similar definition to p4. Uses ANSI cursor motion to avoid network problems. # Notes: # Use p4 for very early models of P7. # Rev-index removed; can't send nulls to terminal in 8-bit modes. # prism7|p7|P7|MDC Prism-7, cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, # p8: Prism-8 # ----------- # # Similar definition to p7. Uses ANSI cursor motion to avoid network problems. # Supports national and multinational character sets. # Notes: # Alternate char set operations only work in multinational mode. # Use p4 for very early models of P8. # Rev-index removed; can't send nulls to terminal in 8-bit modes. # (esr: commented out / because there's no ) # prism8|p8|P8|MDC Prism-8, cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, vpa=\E[%i%p1%dd, use=p4, # p8-w: Prism-8 in 132 column mode # -------------------------------- # # 'Wide' version of p8. # Notes: # Rev-index removed; can't send nulls to terminal in 8-bit modes. # prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, cols#132, is2=\E[<12h\E[<14h, use=p8, # p9: Prism-9 in ANSI mode # ------------------------- # # The "flagship" model of this generation of terminals. # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. # Notes: # Tabs only reset by "reset". Otherwise assumes default (8 cols). # Fixes to deal with terminal firmware bugs: # . 'ri' uses insert-line since rev index doesn't always # . 'sgr0' has extra '0' since esc[m fails # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 # Not covered in the current definition: # . Labels # . Programming Fn keys # . Graphic characters (defaults correctly to vt100) # . Padding values (sets xon) # (esr: commented out / because there's no ) # prism9|p9|P9|MDC Prism-9 in ANSII mode, am, bw, hs, mc5i, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, wsl#72, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N, sc=\E[%y, sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;, sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, # p9-w: Prism-9 in 132 column mode # -------------------------------- # # 'Wide' version of p9. # prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, cols#132, is2=\E[&p\E[<12l\E F\E[<14h, rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, # p9-8: Prism-9 in P8 mode # ------------------------ # # P9 terminal in P8 emulation mode. # Similar to p8 definition. # Insertion and deletion operations possible. # prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, # p9-8-w: Prism-9 in P8 and 132 column modes # ------------------------------------------ # # P9 terminal in P8 emulation mode and 132 column mode. # prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, # p12: Prism-12 in ANSI mode # --------------------------- # # See p9 definition. # prism12|p12|P12|MDC Prism-12 in ANSI mode, use=p9, # p12-w: Prism-12 in 132 column mode # ---------------------------------- # # 'Wide' version of p12. # prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, use=p9-w, # p12-m: Prism-12 in MDC emulation mode # ------------------------------------- # # P12 terminal in MDC emulation mode. # Similar to p8 definition. # Insertion and deletion operations possible. # prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, use=p9-8, # p12-m-w: Prism-12 in MDC emulation and 132 column modes # ------------------------------------------------------- # # P12 terminal in MDC emulation mode and 132 column mode. # prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, use=p9-8-w, # p14: Prism-14 in ANSII mode # --------------------------- # # See p9 definition. # prism14|p14|P14|MDC Prism-14 in ANSII mode, use=p9, # p14-w: Prism-14 in 132 column mode # ---------------------------------- # # 'Wide' version of p14. # prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, use=p9-w, # p14-m: Prism-14 in MDC emulation mode # ------------------------------------- # # P14 terminal in MDC emulation mode. # Similar to p8 definition. # Insertion and deletion operations possible. # prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, use=p9-8, # p14-m-w: Prism-14 in MDC emulation and 132 column modes # ------------------------------------------------------- # # P14 terminal in MDC emulation mode and 132 column mode. # prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, use=p9-8-w, # End of McDonnell Information Systems Prism definitions # These things were popular in the Pick database community at one time # From: George Land 24 Sep 1996 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, am, bw, hs, mir, cols#80, lines#24, ma#1, wsl#78, xmc#1, bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M, pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, smul=^C0, #### Microterm (act, mime) # # The mime1 entries refer to the Microterm Mime I or Mime II. # The default mime is assumed to be in enhanced act iv mode. # # New "safe" cursor movement (5/87) from . Prevents # freakout with out-of-range args on Sytek multiplexors. No and # since it gets confused and it's too dim anyway. No # since Sytek insists ^S means xoff. # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) act4|microterm|microterm act iv, OTbs, am, cols#80, lines#24, bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, # The padding on :sr: and :ta: for act5 and mime is a guess and not final. # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) act5|microterm5|microterm act v, kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, use=act4, # Mimes using brightness for standout. Half bright is really dim unless # you turn up the brightness so far that lines show up on the screen. mime-fb|full bright mime1, is2=^S\E, rmso=^S, smso=^Y, use=mime, mime-hb|half bright mime1, is2=^Y\E, rmso=^Y, smso=^S, use=mime, # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode # the more plausible ":do=^J:" -- esr) # uc was at one time disabled to get around a curses bug, be wary of it mime|mime1|mime2|mimei|mimeii|microterm mime1, OTbs, am, cols#80, it#8, lines#24, vt#9, bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, # These termcaps (for mime2a) put the terminal in low intensity mode # since high intensity mode is so obnoxious. mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), OTbs, am, cols#80, lines#24, bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, smir=\EE, smso=\E\:, smul=\E6, # This is the preferred mode (but ^X can't be used as a kill character) mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), OTbs, cols#80, it#8, lines#24, bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, rmul=\E5, smir=^O, smso=\E8, smul=\E4, # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) mime3a|mime1 emulating 3a, am@, kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, mime3ax|mime-3ax|mime1 emulating enhanced 3a, it#8, dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, use=mime3a, # Wed Mar 9 18:53:21 1983 # We run our terminals at 2400 baud, so there might be some timing problems at # higher speeds. The major improvements in this model are the terminal now # scrolls down and insert mode works without redrawing the rest of the line # to the right of the cursor. This is done with a bit of a kludge using the # exit graphics mode to get out of insert, but it does not appear to hurt # anything when using vi at least. If you have some users using act4s with # programs that use curses and graphics mode this could be a problem. mime314|mm314|mime 314, am, cols#80, lines#24, clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, # Microterm mime 340 from University of Wisconsin mm340|mime340|mime 340, cols#80, lines#24, clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,, kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J, # This came from University of Wisconsin marked "astro termcap for jooss". # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; # also added / based on the init string -- esr) mt4520-rv|micro-term 4520 reverse video, am, hs, msgr, xenl, xon, cols#80, it#8, lines#24, wsl#80, bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[g, tsl=\E[25;1H, # Fri Aug 5 08:11:57 1983 # This entry works for the ergo 4000 with the following setups: # ansi,wraparound,newline disabled, xon/xoff disabled in both # setup a & c. # # WARNING!!! There are multiple versions of ERGO 4000 microcode # Be advised that very early versions DO NOT WORK RIGHT !! # Microterm does have a ROM exchange program- use it or lose big # (ergo400: added / based on the init string -- esr) ergo4000|microterm ergo 4000, da, db, msgr, cols#80, lines#66, bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>, is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, smso=\E[7m$<20>, #### NCR # # NCR's terminal group was merged with AT&T's when AT&T bought the company. # For what happened to that group, see the ADDS section. # # There is an NCR4103 terminal that's just a re-badged Wyse-50. # # The following vendor-supplied termcaps were captured from the Boundless # Technologies site, 8 March 1998. I removed all-upper-case names that were # identical, except for case, to lower-case ones. I also uncommented the acsc # capabilities.X # # The Intecolor emulation of the NCR 2900/260C color terminal is basically a # DEC vt200/300 with color capabilities added. ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an, # The Intecolor emulation of the NCR 2900/260C color terminal is basically a # DEC vt200/300 with color capabilities added. ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan, # The Intecolor emulation of the NCR 2900/260C color terminal is basically a # DEC vt200/300 with color capabilities added. ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp, # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a # DEC vt200/300 with color capabilities added. ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode, colors#8, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wpp, # This definition for ViewPoint supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra # attributes can be removed. # Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. ncr260vppp|NCR 2900_260 viewpoint, am, bw, hs, km, mc5i, mir, msgr, xon, cols#80, lines#24, nlab#32, xmc#1, acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>, el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1, il1=\EM$<2>, ind=\n$<2>, invis=\EG1, is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r, kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF, ncr260vpwpp|NCR 2900_260 viewpoint wide mode, cols#132, cup=\Ea%i%p1%dR%p2%dC$<30>, is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, use=ncr260vppp, ncr260vt100an|NCR 2900_260 vt100 with ansi kybd, am, hs, mir, msgr, xenl, xon, cols#80, lines#24, nlab#32, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, use=ncr260vt100an, ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd, is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, smkx=\E=, use=ncr260vt100an, ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, use=ncr260vt100pp, ncr260vt200an|NCR 2900_260 vt200 with ansi kybd, am, hs, mir, msgr, xenl, xon, cols#80, lines#24, nlab#32, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an, ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd, ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, use=ncr260vt200an, ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, use=ncr260vt200pp, ncr260vt300an|NCR 2900_260 vt300 with ansi kybd, am, hs, mir, msgr, xenl, xon, cols#80, lines#24, nlab#32, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt300an, ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd, ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, use=ncr260vt300an, NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd, cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, use=ncr260vt300pp, # This terminfo file contains color capabilities for the Wyse325 emulation of # the NCR 2900/260C color terminal. Because of the structure of the command # (escape sequence) used to set color attributes, one of the fore/background # colors must be preset to a given value. I have set the background color to # black. The user can change this setup by altering the last section of the # 'setf' definition. The escape sequence to set color attributes is # ESC d y 1 # In addition, the background color can be changed through the desk accessories. # The capablitiy 'op' sets colors to green on black (default combination). # # NOTE: The NCR Unix System Administrator's Shell will not function properly # if the 'pairs' capability is defined. Un-Comment the 'pairs' # capability and recompile if you wish to have it included. # ncr260wy325pp|NCR 2900_260 wyse 325, am, bw, hs, km, mc5i, mir, msgr, xon, colors#16, cols#80, lines#24, ncv#33, nlab#32, acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I, hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, setb=\s, setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, tsl=\EF, ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode, cols#132, cup=\Ea%i%p1%dR%p2%dC$<30>, is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, use=ncr260wy325pp, # This definition for Wyse 350 supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra # attributes can be removed. # Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. # In addition, color capabilities have been added to this file. The drawback, # however, is that the background color has to be black. The foreground colors # are numbered 0 through 15. # # NOTE: The NCR Unix System Administrator's Shell does not function properly # with the 'pairs' capability defined as below. If you wish to # have it included, Un-comment it and recompile (using 'tic'). # ncr260wy350pp|NCR 2900_260 wyse 350, am, bw, hs, km, mc5i, mir, msgr, xon, colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1, acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I, hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP$<10>, mc4=^T, mc5=^R, mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, setb=\s, setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, tsl=\EF, ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode, cols#132, cup=\Ea%i%p1%dR%p2%dC$<30>, is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, use=ncr260wy350pp, # This definition for Wyse 50+ supports several attributes. This means # that it has magic cookies (extra spaces where the attributes begin). # Some applications do not function well with magic cookies. The System # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. # If supporting various attributes is not vital, 'xmc#1' and the extra # attributes can be removed. # Mapping to ASCII character set ('acsc' capability) can also be # restored if needed. # (ncr260wy50+pp: originally contained commented-out # , as well as the commented-out one there -- esr) ncr260wy50+pp|NCR 2900_260 wyse 50+, am, bw, hs, km, mc5i, mir, msgr, xon, cols#80, lines#24, nlab#32, xmc#1, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>, ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP$<10>, mc4=^T, mc5=^R, mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF, ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode, cols#132, cup=\Ea%i%p1%dR%p2%dC$<30>, is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, use=ncr260wy50+pp, ncr260wy60pp|NCR 2900_260 wyse 60, am, bw, hs, km, mc5i, mir, msgr, xon, cols#80, lines#24, nlab#32, acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>, ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, tsl=\EF, ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode, cols#132, cup=\Ea%i%p1%dR%p2%dC$<30>, is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, use=ncr260wy60pp, ncr160vppp|NCR 2900_160 viewpoint, use=ncr260vppp, ncr160vpwpp|NCR 2900_160 viewpoint wide mode, use=ncr260vpwpp, ncr160vt100an|NCR 2900_160 vt100 with ansi kybd, use=ncr260vt100an, ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd, use=ncr260vt100pp, ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, use=ncr260vt100wan, ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd, use=ncr260vt100wpp, ncr160vt200an|NCR 2900_160 vt200 with ansi kybd, use=ncr260vt200an, ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd, use=ncr260vt200pp, ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, use=ncr260vt200wan, ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd, use=ncr260vt200wpp, ncr160vt300an|NCR 2900_160 vt300 with ansi kybd, use=ncr260vt300an, ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd, use=ncr260vt300pp, ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, use=ncr260vt300wan, ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd, use=ncr260vt300wpp, ncr160wy50+pp|NCR 2900_160 wyse 50+, use=ncr260wy50+pp, ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode, use=ncr260wy50+wpp, ncr160wy60pp|NCR 2900_160 wyse 60, use=ncr260wy60pp, ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode, use=ncr260wy60wpp, ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, am, hs, mc5i, mir, msgr, xon, cols#80, it#8, lines#24, nlab#32, acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, clear=\E[2J\E[1;1H$<300>, cr=^M, csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, ind=\ED, is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>, sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, tsl=\E[>+1$<70>, ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, cols#132, is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, use=ncrvt100an, # # Vendor-supplied NCR termcaps end here # NCR7900 DIP switches: # # Switch A: # 1-4 - Baud Rate # 5 - Parity (Odd/Even) # 6 - Don't Send or Do Send Spaces # 7 - Parity Enable # 8 - Stop Bits (One/Two) # # Switch B: # 1 - Upper/Lower Shift # 2 - Typewriter Shift # 3 - Half Duplex / Full Duplex # 4 - Light/Dark Background # 5-6 - Carriage Return Without / With Line Feed # 7 - Extended Mode # 8 - Suppress Keyboard Display # # Switch C: # 1 - End of line entry disabled/enabled # 2 - Conversational mode / (Local?) Mode # 3 - Control characters displayed / not displayed # 4 - (2-wire?) / 4-wire communications # 5 - RTS on and off for each character # 6 - (50Hz?) / 60 Hz # 7 - Exit after level zero diagnostics # 8 - RS-232 interface # # Switch D: # 1 - Reverse Channel (yes / no) # 2 - Manual answer (no / yes) # 3-4 - Cursor appearance # 5 - Communication Rate # 6 - Enable / Disable EXT turnoff # 7 - Enable / Disable CR turnoff # 8 - Enable / Disable backspace # # Since each attribute parameter is 0 or 1, we shift each attribute (standout, # reverse, blink, dim, and underline) the appropriate number of bits (by # multiplying the 0 or 1 by a correct factor to shift) so the bias character, # '@' is (effectively) "or"ed with each attribute to generate the proper third # character in the 0 sequence. The string implements the following # equation: # # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) # # Where: P1 <==> Standout attribute parameter # P2 <==> Underline attribute parameter # P3 <==> Reverse attribute parameter # P4 <==> Blink attribute parameter # P5 <==> Dim attribute parameter # From , init string hacked by SCO. ncr7900i|ncr7900|ncr 7900 model 1, am, bw, ul, cols#80, lines#24, xmc#1, bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J, is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, rmul=\E0@, sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, sgr0=\E0@, smso=\E0Q, smul=\E0`, ncr7900iv|ncr 7900 model 4, am, bw, eslok, hs, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, # Warning: This terminal will lock out the keyboard when it receives a CTRL-D. # The user can enter a CTRL-B to get out of this locked state. # In , we want to output the character given by the formula: # ((col / 10) * 16) + (col % 10) where "col" is "p1" ncr7901|ncr 7901 model, am, bw, ul, cols#80, lines#24, bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J, is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016, sgr0=^O, smso=\E0Q\016, smul=\E0`\016, vpa=\013%p1%{64}%+%c, # Newbury Data Recording Limited (Newbury Data) # # Have been manufacturing and reselling various peripherals for a long time # They don't make terminals anymore, but are still in business (in 2007). # Their e-mail address is at ndsales@newburydata.co.uk # and their post address is: # # Newbury Data Recording Ltd, # Premier Park, Road One, # Winsford, Cheshire, CW7 3PT # # Their technical support is still good, they sent me for free a printed copy # of the 9500 user manual and I got it just 1 week after I first contacted them # (in 2005)! # NDR 9500 # Manufactured in the early/mid eighties, behaves almost the same as a # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but # keep the same keyboard layout), add an optional 25-line mode, replace the DIP # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC ! # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is # recognized: if you type in "ESC !", the next (third) character is not # echoed, showing that the terminal was actually waiting for a parameter! ndr9500|nd9500|Newbury Data 9500, am, bw, hs, mc5i, mir, msgr, ul, xon, cols#80, lines#24, wsl#79, acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0, clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO, kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_, pfloc=\E|%{48}%p1%+%c2%p2\031, pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej, rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N, sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;, sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O, tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H, ndr9500-nl|NDR 9500 with no status line, hs@, wsl@, dsl@, fsl@, tsl@, use=ndr9500, ndr9500-25|NDR 9500 with 25th line enabled, lines#25, use=ndr9500, ndr9500-25-nl|NDR 9500 with 25 lines and no status line, lines#25, use=ndr9500-nl, ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink), msgr@, xmc#1, blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c, sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500, ndr9500-25-mc|NDR 500 with 25 lines and magic cookies, lines#25, use=ndr9500-mc, ndr9500-mc-nl|NDR 9500 with magic cookies and no status line, hs@, wsl@, dsl@, fsl@, tsl@, use=ndr9500-mc, ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line, lines#25, use=ndr9500-mc-nl, #### Perkin-Elmer (Owl) # # These are official terminfo entries from within Perkin-Elmer. # bantam|pe550|pe6100|perkin elmer 550, OTbs, cols#80, lines#24, bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA, fox|pe1100|perkin elmer 1100, OTbs, am, cols#80, lines#24, bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3, owl|pe1200|perkin elmer 1200, OTbs, am, in, cols#80, lines#24, bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, pe1251|pe6300|pe6312|perkin elmer 1251, am, cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J, kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, # (pe7000m: this had # rmul=\E!\0, smul=\E!\040, # which is probably wrong, it collides with kf0 pe7000m|perkin elmer 7000 series monochrome monitor, am, cols#80, lines#24, bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EI, home=\EH, ind=^J, is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, ll=\ES7\s, ri=\ER, pe7000c|perkin elmer 7000 series colour monitor, is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m, #### Sperry Univac # # Sperry Univac has merged with Burroughs to form Unisys. # # This entry is for the Sperry UTS30 terminal running the TTY # utility under control of CP/M Plus 1R1. The functionality # provided is comparable to the DEC vt100. # (uts30: I added / based on the init string -- esr) uts30|sperry uts30 with cp/m@1R1, am, bw, hs, cols#80, lines#24, wsl#40, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, smul=\E[4m, tsl=\E], uc=\EPB, #### Tandem # # Tandem builds these things for use with its line of fault-tolerant # transaction-processing computers. They aren't generally available # on the merchant market, and so are fairly uncommon. # tandem6510|adm3a repackaged by Tandem, use=adm3a, # A funny series of terminal that TANDEM uses. The actual model numbers # have a fourth digit after 653 that designates minor variants. These are # natively block-mode and rather ugly, but they have a character mode which # this doubtless(?) exploits. There is a 6520 that is slightly dumber. # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, # removed , no such file -- esr) tandem653|t653x|Tandem 653x multipage terminal, OTbs, am, da, db, hs, cols#80, lines#24, wsl#64, xmc#1, clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, #### Tandy/Radio Shack # # Tandy has a line of VDTs distinct from its microcomputers. # dmterm|deskmate terminal, am, bw, cols#80, lines#24, bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, use=adm+sgr, dt100|dt-100|Tandy DT-100 terminal, xon, cols#80, lines#24, xmc#1, acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, dt100w|dt-100w|Tandy DT-100 terminal (wide mode), cols#132, use=dt100, dt110|Tandy DT-110 emulating ansi, xon, cols#80, lines#24, acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, pt210|TRS-80 PT-210 printing terminal, hc, os, cols#80, bel=^G, cr=^M, cud1=^J, ind=^J, #### Tektronix (tek) # # Tektronix tubes are graphics terminals. Most of them use modified # oscilloscope technology incorporating a long-persistence green phosphor, # and support vector graphics on a main screen with an attached "dialogue # area" for interactive text. # tek|tek4012|tektronix 4012, OTbs, os, cols#75, lines#35, bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J, ff=\014$<1000>, is2=\E^O, # (tek4013: added to suppress tic warnings re / --esr) tek4013|tektronix 4013, acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, tek4014|tektronix 4014, cols#81, lines#38, is2=\E\017\E9, use=tek4012, # (tek4015: added to suppress tic warnings re / --esr) tek4015|tektronix 4015, acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, tek4014-sm|tektronix 4014 in small font, cols#121, lines#58, is2=\E\017\E\:, use=tek4014, # (tek4015-sm: added to suppress tic warnings re / --esr) tek4015-sm|tektronix 4015 in small font, acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, # Tektronix 4023 from Andrew Klossner # # You need to have "stty nl2" in effect. Some versions of tset(1) know # how to set it for you. # # It's got the Magic Cookie problem around stand-out mode. If you can't # live with Magic Cookie, remove the :so: and :se: fields and do without # reverse video. If you like reverse video stand-out mode but don't want # it to flash, change the letter 'H' to 'P' in the :so: field. tek4023|tektronix 4023, OTbs, am, OTdN#4, cols#80, lines#24, vt#4, xmc#1, OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, rmso=^_@, smso=^_P, # It is recommended that you run the 4025 at 4800 baud or less; # various bugs in the terminal appear at 9600. It wedges at the # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed # on keyboard don't work. You have to hit BREAK twice to get # one break at any speed - this is a documented feature. # Can't use cursor motion because it's memory relative, and # because it only works in the workspace, not the monitor. # Same for home. Likewise, standout only works in the workspace. # # was commented out since vi and rogue seem to work better # simulating it with lots of spaces! # # and had 145ms of padding, but that slowed down vi's ^U # and didn't seem necessary. # tek4024|tek4025|tek4027|tektronix 4024/4025/4027, OTbs, am, da, db, cols#80, it#8, lines#34, lm#0, bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M, cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r, cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, ind=^F^J, is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r, smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r, tek4025-17|tek 4025 17 line window, lines#17, use=tek4025, tek4025-17-ws|tek 4025 17 line window in workspace, is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r, rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, smso=\037att e\r, use=tek4025-17, tek4025-ex|tek4027-ex|tek 4025/4027 w/!, is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, # Tektronix 4025a # From: Doug Gwyn # The following status modes are assumed for normal operation (replace the # initial "!" by whatever the current command character is): # !COM 29 # NOTE: changes command character to GS (^]) # ^]DUP # ^]ECH R # ^]EOL # ^]RSS T # ^]SNO N # ^]STO 9 17 25 33 41 49 57 65 73 # Other modes may be set according to communication requirements. # If the command character is inadvertently changed, termcap can't restore it. # Insert-character cannot be made to work on both top and bottom rows. # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. # There also seems to be a problem with vertical motion, perhaps involving # delete/insert-line, following a typed carriage return. This terminal sucks. # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't # work any more. -- esr) tek4025a|Tektronix 4025A, OTbs, OTpt, am, bw, da, db, xon, cols#80, it#8, lines#34, bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;, cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;, rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;, tbc=\035sto;, # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 # Here's the command file that I use to get rogue to work on the 4025. # It should work with any program using the old curses (e.g. it better # not try to scroll, or cursor addressing won't work. Also, you can't # see the cursor.) # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) tek4025-cr|tek 4025 for curses and rogue, OTbs, am, cols#80, it#8, lines#33, clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;, cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J, is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, rmcup=\037wor 0, smcup=\037wor 33h, # next two lines commented out since curses only allows 128 chars, sigh. # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: tek4025ex|4025ex|4027ex|tek 4025 w/!, is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r, rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, tek4105|tektronix 4105, OTbs, am, mir, msgr, ul, xenl, xt, cols#79, it#8, lines#29, acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, smul=\E[=5;<2m, tbc=\E[1g, # (tek4105-30: I added / based on the init string -- esr) tek4105-30|4015 emulating 30 line vt100, am, mir, msgr, xenl, xon, cols#80, it#8, lines#30, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=vt100+fnkeys, # Tektronix 4105 from BRL # The following setup modes are assumed for normal operation: # CODE ansi CRLF no DABUFFER 141 # DAENABLE yes DALINES 30 DAMODE replace # DAVISIBILITY yes ECHO no EDITMARGINS 1 30 # FLAGGING input INSERTREPLACE replace LFCR no # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B # SELECTCHARSET G1 0 TABS -2 # Other setup modes may be set for operator convenience or communication # requirements; I recommend # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes # BYPASSCANCEL CURSORKEYMODE no DAINDEX 1 0 0 # EOFSTRING '' EOLSTRING EOMCHARS # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 # IGNOREDEL no KEYEXCHAR
NVDEFINE -53 "" # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 # XMTDELAY 0 # and factory color maps. After setting these modes, save them with NVSAVE. No # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # "IC" cannot be used in combination with "im" & "ei". # "tek4105a" is just a guess: tek4105a|Tektronix 4105, OTbs, OTpt, msgr, xon, OTkn#8, cols#80, it#8, lines#30, vt#3, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # # Tektronix 4106/4107/4109 from BRL # The following setup modes are assumed for normal operation: # CODE ansi COLUMNMODE 80 CRLF no # DABUFFER 141 DAENABLE yes DALINES 32 # DAMODE replace DAVISIBILITY yes ECHO no # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace # LFCR no LOCKKEYBOARD no ORIGINMODE relative # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 # TABS -2 # Other setup modes may be set for operator convenience or communication # requirements; I recommend # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes # BYPASSCANCEL CURSORKEYMODE no DAINDEX 1 0 0 # EOFSTRING '' EOLSTRING EOMCHARS # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 # IGNOREDEL no KEYEXCHAR
NVDEFINE -53 "" # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 # XMTDELAY 0 # and factory color maps. After setting these modes, save them with NVSAVE. No # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! # "IC" cannot be used in combination with "im" & "ei". tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, msgr, xon, cols#80, it#8, lines#32, vt#3, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code: # 0 selects Tek mode, i.e., \E%!0 # 1 selects ANSI mode # 2 selects ANSI edit-mode # 3 selects VT52 mode # # One odd thing about the description (which has been unchanged since the 90s) # is that the cursor addressing is using VT52 mode, and a few others use the # VT52's non-CSI versions of ANSI, e.g., \EJ. tek4107|tek4109|tektronix terminals 4107 4109, OTbs, am, mir, msgr, ul, xenl, xt, cols#79, it#8, lines#29, bel=^G, blink=\E%!1\E[5m$<2>\E%!0, bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, rev=\E%!1\E[7m$<2>\E%!0, ri=\EI, rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0, sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, smul=\E%!1\E[4m$<2>\E%!0, # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; # see the note attached to tek4207. tek4207-s|Tektronix 4207 with sysline but no memory, eslok, hs, dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, is2=\E7\E[?6l\E[2K\E[?6h\E8, tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, # The 4110 series may be a wonderful graphics series, but they make the 4025 # look good for screen editing. In the dialog area, you can't move the cursor # off the bottom line. Out of the dialog area, ^K moves it up, but there # is no way to scroll. # # Note that there is a floppy for free from Tek that makes the # 4112 emulate the vt52 (use the vt52 termcap). There is also # an expected enhancement that will use ANSI standard sequences. # # 4112 in non-dialog area pretending to scroll. It really wraps # but vi is said to work (more or less) in this mode. # # 'vi' works reasonably well with this entry. # otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series, am, cols#80, lines#34, bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J, rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, # The 4112 with the ANSI compatibility enhancement tek4112|tek4114|tektronix 4110 series, OTbs, am, db, cols#80, lines#34, cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, tek4112-nd|4112 not in dialog area, OTns, cuu1=^K, use=tek4112, tek4112-5|4112 in 5 line dialog area, lines#5, use=tek4112, # (tek4113: this used to have "", someone's mistake; # removed ", ", which had been commented out in 8.3. # Note, the !0 and !1 sequences in /// were # previously \0410 and \0411 sequences...I don't *think* they were supposed # to be 4-digit octal -- esr) tek4113|tektronix 4113 color graphics with 5 line dialog area, OTbs, am, da, eo, cols#80, lines#5, clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, tek4113-34|tektronix 4113 color graphics with 34 line dialog area, lines#34, is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . # :vb: needs enough delay to let you see the background color being toggled. tek4113-nd|tektronix 4113 color graphics with no dialog area, OTbs, am, eo, cols#80, it#8, lines#34, clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, cvvis=\ELZ\EKA0, flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, # This entry is from Tek. Inc. (Brian Biehl) # (tek4115: :bc: renamed to :le:, / added based on init string -- esr) otek4115|Tektronix 4115, OTbs, am, da, db, eo, cols#80, it#8, lines#34, cbt=\E[Z, clear=\E[H\E[2J, cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, il1=\E[L, is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, kbs=^H, ri=\EM, rmam=\E[?7l, rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tek4115|newer tektronix 4115 entry with more ANSI capabilities, am, xon, cols#80, lines#34, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, # The tek4125 emulates a vt100 incorrectly - the scrolling region # command is ignored. The following entry replaces with the needed # , , and ; removes some cursor pad commands that the tek4125 # chokes on; and adds a lot of initialization for the tek dialog area. # Note that this entry uses all 34 lines and sets the cursor color to green. # Steve Jacobson 8/85 # (tek4125: there were two "\!"s in the is that I replaced with "\E!"; # commented out, =\E1 because there's no -- esr) tek4125|tektronix 4125, lines#34, csr@, dl1=\E[1M, il1=\E[1L, is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rc@, sc@, smkx=\E=, use=vt100, # From: # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO # supplied another, less capable 4107 entry. So we'll use that for 4107 and # note that if jcoker wasn't confused you may be able to use this one. # I merged in ,,,, from a BRL entry -- esr) tek4207|Tektronix 4207 graphics terminal with memory, am, bw, mir, msgr, ul, xenl, cols#80, it#8, lines#32, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, rev=\E[7m, ri=\E[T, rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, smul=\E[4m, tbc=\E[1g, # From: Thu Oct 31 12:54:27 1985 # (tek4404: There was a "\!" in that I replaced with "\E!". # Tab had been given as \E2I,that must be the tab-set capability -- esr) tek4404|tektronix 4404, OTbs, cols#80, it#8, lines#32, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, smkx=\E[?1l, smso=\E[7m, smul=\E[4m, # Some unknown person wrote: # I added the is string - straight Unix has ESC ; in the login # string which sets a ct8500 into monitor mode (aka 4025 snoopy # mode). The is string here cleans up a few things (but not # everything). ct8500|tektronix ct8500, am, bw, da, db, cols#80, lines#25, bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J, cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, # Tektronix 4205 terminal. # # am is not defined because the wrap around occurs not when the char. # is placed in the 80'th column, but when we are attempting to type # the 81'st character on the line. (esr: hmm, this is like the vt100 # version of xenl, perhaps am + xenl would work!) # # Bold, dim, and standout are simulated by colors and thus not allowed # with colors. The tektronix color table is mapped into the RGB color # table by setf/setb. All colors are reset to factory specifications by oc. # The cap uses RGB notation to define colors. for arguments 1-3 the # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- # interval then maps into pre-defined value. tek4205|tektronix 4205, ccc, mir, msgr, colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1, invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, kf7=\ES, oc=\E%!0\ETFB000001F4F4F42F40030F404A4C because of a bug in old vi (if stty says you have # a "newline" style terminal (-crmode) vi figures all it needs is nl # to get crlf, even if is not ^M.) # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2, OTbs, xon, cols#80, lines#24, clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, tty43|model 43 teletype, OTbs, am, hc, os, xon, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, #### Tymshare # # You can add to put this 40-column mode, though I can't # for the life of me think why anyone would want to. scanset|sc410|sc415|Tymshare Scan Set, am, bw, msgr, cols#80, lines#24, acsc=j%k4l, sc=^B, smacs=^N, #### Volker-Craig (vc) # # If you saw a Byte Magazine cover with a terminal on it during the early # 1980s, it was probably one of these. Carl Helmers liked them because # they could crank 19.2 and were cheap (that is, he liked them until he tried # to program one...) # # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time # every other linefeed. vc303|vc103|vc203|volker-craig 303, OTbs, OTns, am, cols#80, lines#24, bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^N, ll=\017$<1>W, vc303a|vc403a|volker-craig 303a, clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) vc404|volker-craig 404, OTbs, am, cols#80, lines#24, bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, vc404-s|volker-craig 404 w/standout mode, cud1=^J, rmso=^O, smso=^N, use=vc404, # From: # (vc414: merged in cup/dl1/home from an old vc414h-noxon) vc414|vc414h|Volker-Craig 414H in sane escape mode., OTbs, am, cols#80, lines#24, clear=\E\034$<40>, cud1=\E^K, cuf1=^P, cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, rmso=\E^_, smso=\E^Y, vc415|volker-craig 415, clear=^L, use=vc404, ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS # #### IBM PC and clones # # The pcplot IBM-PC terminal emulation program is really messed up. It is # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, # doesn't support scrolling regions, ignores add line commands, and ignores # delete line commands. Consequently, the resulting behavior looks like a # crude adm3a-type terminal. # Steve Jacobson 8/85 pcplot|pc-plot terminal emulation program, xenl@, csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100, # KayPro II from Richard G Turner # I've found that my KayPro II, running MDM730, continues to emulate an # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX # system the following termcap entry works well: # I have noticed a couple of minor glitches, but nothing I can't work # around. (I added two capabilities from the BRL entry -- esr) kaypro|kaypro2|kaypro II, OTbs, am, cols#80, lines#24, bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, # From IBM, Thu May 5 19:35:27 1983 # (ibmpc: commented out =\200R because we don't know -- esr) ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), OTbs, am, cols#80, lines#24, bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\, cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, OTbs, am, bw, eo, hs, km, msgr, ul, cols#80, it#8, lines#24, acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, #### Apple II # # Apple II firmware console first, then various 80-column cards and # terminal emulators. For two cents I'd toss all these in the UFO file # along with the 40-column apple entries. # # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL # 'it#8' tells UNIX that you have tabs every 8 columns. This is a # function of TIC, not the firmware. # The clear key on a IIgs will do something like clear-screen, # depending on what you're in. appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, OTbs, am, bw, eo, msgr, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, smso=^O, # Apple //e with 80-column card, entry from BRL # The modem interface is permitted to discard LF (maybe DC1), otherwise # passing characters to the 80-column firmware via COUT (PR#3 assumed). # Auto-wrap does not work right due to newline scrolling delay, which also # requires that you set "stty cr2". # Note: Cursor addressing is only available via the Pascal V1.1 entry, # not via the BASIC PR#3 hook. All this nonsense can be avoided only by # using a terminal emulation program instead of the built-in firmware. apple2e|Apple //e, bw, msgr, cols#80, lines#24, bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, smso=^O, # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro # 4.20, with incoming and outgoing terminals both on 0, emulation On. apple2e-p|Apple //e via Pascal, cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, kcud1=^J, use=apple2e, # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL # Enable DC3/DC1 flow control with "stty ixon -ixany". apple-ae|ASCII Express, OTbs, am, bw, msgr, nxon, xon, cols#80, it#8, lines#24, bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, smso=^O, appleII|apple ii plus, OTbs, am, cols#80, it#8, lines#24, clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O, # Originally by Gary Ford 21NOV83 # From: Fri Oct 11 21:27:00 1985 apple-80|apple II with smarterm 80 col, OTbs, am, bw, cols#80, lines#24, cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=\013$<10*/>, el=\035$<10/>, home=^Y, apple-soroc|apple emulating soroc 120, am, cols#80, lines#24, bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, # From Peter Harrison, Computer Graphics Lab, San Francisco # ucbvax!ucsfmis!harrison .....uucp # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA # "These two work. If you don't have the inverse video chip for the # Apple with videx then remove the :so: and :se: fields." # (apple-videx: this used to be called DaleApple -- esr) apple-videx|Apple with videx videoterm 80 column board with inverse video, OTbs, am, xenl, cols#80, it#8, lines#24, clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y, rmso=^Z2, sgr0=^Z2, smso=^Z3, # My system [for reference] : Apple ][+, 64K, Ultraterm display card, # Apple Cat ][ 212 modem, + more all # controlled by ASCII Express: Pro. # From Dave Shaver apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, OTbs, am, eo, xt, cols#80, lines#24, acsc=, clear=^L, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], flash=^W35^W06, home=^Y, is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, rmso=^N, smso=^O, apple-uterm|Ultraterm for Apple micros, OTbs, am, eo, xt, cols#80, lines#24, acsc=, clear=^L, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, # from trwrba!bwong (Bradley W. Wong): # # This entry assumes that you are using an apple with the UCSD Pascal # language card. SYSTEM.MISCINFO is assumed to be the same as that # supplied with the standard apple except that screenwidth should be set # using SETUP to 80 columns. Note that the right arrow is not mapped in # this termcap entry. This is because that key, on the Apple, transmits # a ^U and would thus preempt the more useful "up" function of vi. # # HMH 2/23/81 apple80p|80-column apple with Pascal card, am, bw, cols#80, lines#24, clear=^Y^L, cuf1=^\\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H, # # Apple II+ equipped with Videx 80 column card # # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; # manually converted by D A Gwyn # # DO NOT use any terminal emulation with this data base, it works directly # with the Videx card. This has been tested with vi 1200 baud and works fine. # # This works great for vi, except I've noticed in pre-R2, ^U will scroll back # 1 screen, while in R2 ^U doesn't. # For inverse alternate character set add: # =^O:=^N: # (apple-v: added it#8 -- esr) apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), am, xenl, cols#80, it#8, lines#24, bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, khome=^Y, rmso=^Z2, smso=^Z3, apple-videx3|vapple|Apple II with 80 col card, OTbs, am, cols#80, lines#24, clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH, #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL aepro|Apple II+ running ASCII Express Pro--vt52, OTbs, cols#80, lines#24, clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory apple-vm80|ap-vm80|apple with viewmax-80, OTbs, cols#80, lines#24, clear=\014$<300/>, cuf1=^\\:, cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, ed=\013$<300/>, el=^], home=\031$<200/>, #### Apple Lisa & Macintosh # # (lisa: changed to -- esr) lisa|apple lisa console display (black on white), OTbs, am, eo, msgr, cols#88, it#8, lines#32, acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, liswb|apple lisa console display (white on black), is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, smso=\E[m, smul=\E[4m, use=lisa, # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; # revised by Ferd Brundick # # These entries assume that the 'Auto Wraparound' is enabled. # Xon-Xoff flow control should also be enabled. # # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab # settings are in non-volatile memory and don't need to be reset upon login. # Also setting the number of columns glitches the screen annoyingly. # You can type "reset" to get them set. # lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, OTbs, OTpt, am, xenl, xon, OTkn#4, cols#80, it#8, lines#24, vt#3, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # Lisaterm in 132 column ("wide") mode. lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, cols#132, kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, # Although MacTerminal has insert/delete line, it is commented out here # since it is much faster and cleaner to use the "lock scrolling region" # method of inserting and deleting lines due to the MacTerminal implementation. # Also, the "Insert/delete ch" strings have an extra character appended to them # due to a bug in MacTerminal V1.1. Blink is disabled since it is not # supported by MacTerminal. mac|macintosh|Macintosh with MacTerminal, xenl, OTdN#30, blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, # Lisaterm in 132 column ("wide") mode. mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, cols#132, use=mac, # nsterm*|Apple_Terminal - AppKit Terminal.app # # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X # Server and Mac OS X operating systems. There is also a # "terminal.app" in GNUStep, but I believe it to be an unrelated # codebase and I have not attempted to describe it here. # # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you # are pretty much on your own. Use "nsterm-7-m" and hope for the best. # You might also try "nsterm-7" and "nsterm-old" if you suspect your # version supports color. # # To determine the version of Terminal.app you're using by running: # # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION" # # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm") # # For Apple_Terminal v71+/v100+, use "nsterm-bce". # # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s". # # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s". # # For all earlier versions (Apple_Terminal), try "nsterm-7-m" # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s" # might work too, but really you're on your own here since these # systems are very obsolete and I can't test them. I do welcome # patches, though :). # Other Terminals: # # For GNUstep_Terminal, you're probably best off using "linux" or # writing your own terminfo. # For MacTelnet, you're on your own. It's a different codebase, and # seems to be somewhere between "vt102", "ncsa" and "xterm-color". # For iTerm.app, see "iterm". # # The AppKit Terminal.app descriptions all have names beginning with # "nsterm". Note that the statusline (-s) versions use the window # titlebar as a phony status line, and may produce warnings during # compilation as a result ("tsl uses 0 parameters, expected 1".) # Ignore these warnings, or even ignore these entries entirely. Apps # which need to position the cursor or do other fancy stuff inside the # status line won't work with these entries. They're primarily useful # for programs like Pine which provide simple notifications in the # status line. Please note that non-ASCII characters don't work right # in the status line, since Terminal.app incorrectly interprets their # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X # versions) or only accepts status lines consisting entirely of # characters from the first 256 Unicode positions (including C1 but # not C0 or DEL.) # # The Mythology* of AppKit Terminal.app: # # In the days of NeXTSTep 0.x and 1.x there were two incompatible # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a # shareware replacement for Terminal called "Stuart" which NeXT bought # and used as the basis for the Terminal.app in NeXTstep 2+, # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or # capabilities for the early versions, but I believe that the # TERM_PROGRAM_VERSION may have been reset at some point. # # The early versions were tailored to the NeXT character set. Sometime # after the Apple aquisition the encoding was swiched to MacRoman # (initally with serious altcharset bugs due to incomplete conversion # of the old NeXT code,) and then later to UTF-8. Alos sometime during # or just prior to the early days of Mac OS X, the Terminal grew ANSI # 8-color support (initially buggy when combined with attributes, but # that was later fixed.) More recently, around Mac OS X version 10.3 # or so (Terminal.app v100+) xterm-like 16-color support was added. In # some versions (for instance 133-1 which shipped with Mac OS X # version 10.4) this suffered from the bug, but that seems to # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+). # # In the early days of Mac OS X the terminal was fairly buggy and # would routinely crash under load. Many of these bugs seem to have # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but # some may still remain. This change seems to correspond to # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as # it did previously. # # * This may correspond with what actually happened, but I don't # know. It is based on guesswork, hearsay, private correspondence, # my faulty memory, and the following online sources and references: # # [1] "Three Scotts and a Duane" by Simson L. Garfinkel # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html # # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep # # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to # "nsterm" to comply with the name length and case conventions and # limitations of various software packages [notably Solaris terminfo # and UNIX.] A single Apple_Terminal alias is retained for # backwards-compatbility. # # * Added function key support (F1-F4). These only work in Terminal.app # version 51, hopefully the capabilities won't cause problems for people # using version 41. # # * Added "full color" (-c) entries which support the 16-color mode in # version 51. # # * By default, version 51 uses UTF-8 encoding with broken altcharset # support, so "ASCII" (-7) entries without altcharset support were # added. # nsterm - AppKit Terminal.app # # Apple's Mac OS X includes a Terminal.app derived from the old NeXT # Terminal.app. It is a partial VT100 emulation with some xterm-like # extensions. This terminfo was written to describe versions 41 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X # version 10.1) of Terminal.app. # # Terminal.app runs under the Mac OS X Quartz windowing system (and # other AppKit-supported windowing systems.) On the Mac OS X machine I # use, the executable for Terminal.app is: # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal # # If you're looking for a description of the full-screen system # console which runs under Apple's Darwin operating system on PowerPC # platforms, see the "xnuppc" entry instead. # # There were no function keys in version 41. In version 51, there are # four working function keys (F1, F2, F3 and F4.) The function keys # are included in all of these entries. # # It does not support mouse pointer position reporting. Under some # circumstances the cursor can be positioned using option-click; this # works by comparing the cursor position and the selected position, # and simulating enough cursor-key presses to move the cursor to the # selected position. This technique fails in all but the simplest # applications. # # It provides partial ANSI color support (background colors interacted # badly with bold in version 41, though, as reflected in :ncv:.) The # monochrome (-m) entries are useful if you've disabled color support # or use a monochrome monitor. The full color (-c) entries are useful # in version 51, which doesn't exhibit the background color bug. They # also enable an xterm-compatible 16-color mode. # # The configurable titlebar is set using xterm-compatible sequences; # it is used as a status bar in the statusline (-s) entries. Its width # depends on font sizes and window sizes, but 50 characters seems to # be the default for an 80x24 window. # # The MacRoman character encoding is used for some of the alternate # characters in the "MacRoman" entries; the "ASCII" (-7) entries # disable alternate character set support entirely, and the "VT100" # (-acs) entries rely instead on Terminal.app's own buggy VT100 # graphics emulation, which seems to think the character encoding is # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries # are useful in Terminal.app version 51, which supports UTF-8 and # other ASCII-compatible character encodings but does not correctly # implement VT100 graphics; once VT100 graphics are correctly # implemented in Terminal.app, the "VT100" (-acs) entries should be # usable in any ASCII-compatible character encoding [except perhaps # in UTF-8, where some experts argue for disallowing alternate # characters entirely.] # # Terminal.app reports "vt100" as the terminal type, but exports # several environment variables which may aid detection in a shell # profile (i.e. .profile or .login): # # TERM=vt100 # TERM_PROGRAM=Apple_Terminal # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 # # For example, the following Bourne shell script would detect the # correct terminal type: # # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] # then # export TERM # if [ :"$TERM_PROGRAM_VERSION" = :41 ] # then # TERM="nsterm-old" # else # TERM="nsterm-c-7" # fi # fi # # In a C shell derivative, this would be accomplished by: # # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then # setenv TERM "nsterm-old" # else # setenv TERM "nsterm-c-7" # endif # endif # endif # The '+' entries are building blocks nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, am, bw, msgr, xenl, xon, cols#80, it#8, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, enacs=\E(B\E)0, rmacs=^O, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, use=nsterm+7, nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245, enacs=\E(B\E)0, rmacs=^O, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, use=nsterm+7, nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, hs, wsl#50, dsl=\E]2;\007, fsl=^G, tsl=\E]2;, nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), op=\E[0m, use=ibm+16color, nsterm+c41|AppKit Terminal.app v41 color support, colors#8, ncv#37, pairs#64, op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, # These are different combinations of the building blocks # ASCII charset (-7) nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), use=nsterm+7, nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), use=nsterm+s, use=nsterm+7, nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), use=nsterm+c41, use=nsterm+7, nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), use=nsterm+c, use=nsterm+7, nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), use=nsterm+s, use=nsterm+c41, use=nsterm+7, nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), use=nsterm+s, use=nsterm+c, use=nsterm+7, # VT100 alternate-charset (-acs) nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), use=nsterm+acs, nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), use=nsterm+s, use=nsterm+acs, nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), use=nsterm+c41, use=nsterm+acs, nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), use=nsterm+c, use=nsterm+acs, nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), use=nsterm+s, use=nsterm+c41, use=nsterm+acs, nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), use=nsterm+s, use=nsterm+c, use=nsterm+acs, # MacRoman charset nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), use=nsterm+mac, nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), use=nsterm+s, use=nsterm+mac, nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color), use=nsterm+c41, use=nsterm+mac, nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), use=nsterm+c, use=nsterm+mac, nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), use=nsterm+s, use=nsterm+c41, use=nsterm+mac, nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), use=nsterm+s, use=nsterm+c, use=nsterm+mac, # In Mac OS X version 10.5 the format of the preferences has changed # and a new, more complex technique is needed, e.g., # # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass( # "NSUserDefaults");ud=NSUserDefaults.alloc(); # ud.init();prefs=ud.persistentDomainForName_( # "com.apple.Terminal");prefs["Window Settings"][ # prefs["Default Window Settings"]]["TerminalType" # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs, # "com.apple.Terminal")' nsterm-16color # # and it is still not settable from the preferences dialog. This is # tracked under rdar://problem/7365108 and rdar://problem/7365134 # in Apple's bug reporter. nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5, bw@, mir, npc, civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd, use=nsterm-c-s-acs, # The versions of Terminal.app in Mac OS X version 10.3.x seem to have # the background color erase bug. The newer version 240.2 in Mac OS X # version 10.5 does not. # # This entry is based on newsgroup comments by Alain Bench, Christian Ebert, # and D P Schreber comparing to nsterm-c-s-acs. # # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM # can be set in Terminal.app, e.g., # # defaults write com.apple.Terminal TermCapString nsterm-bce # # and that it is not set in Terminal's preferences dialog. nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce), bce, bw, use=nsterm-16color, # This is an alias which should always point to the "current" version nsterm|Apple_Terminal|AppKit Terminal.app, use=nsterm-16color, # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and # more featureful) terminal emulator for Mac OS X. It is similar # enough in capabilities to nsterm-16color that I have derived this # description from that one, but as far as I know they share no code. # Many of the features are user-configurable, but I attempt only to # describe the default configuration. # # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is # disabled. iTerm.app|iTerm.app terminal emulator for Mac OS X, bce, bw@, ccc@, csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color, use=nsterm-16color, # xnuppc - Darwin PowerPC Console (a.k.a. "darwin") # # On PowerPC platforms, Apple's Darwin operating system uses a # full-screen system console derived from a NetBSD framebuffer # console. It is an ANSI-style terminal, and is not really VT-100 # compatible. # # Under Mac OS X, this is the system console driver used while in # single-user mode [reachable by holding down Command-S during the # boot process] and when logged in using console mode [reachable by # typing ">console" at the graphical login prompt.] # # If you're looking for a description of the Terminal.app terminal # emulator which runs under the Mac OS X Quartz windowing system (and # other AppKit-supported windowing systems,) see the "nsterm" # entry instead. # # NOTE: Under Mac OS X version 10.1, the default login window does not # prompt for user name, instead requiring an icon to be selected from # a list of known users. Since the special ">console" login is not in # this list, you must make one of two changes in the Login Window # panel of the Login section of System Prefs to make the special # ">console" login accessible. The first option is to enable 'Show # "Other User" in list for network users', which will add a special # "Other..." icon to the graphical login panel. Selecting "Other..." # will present the regular graphical login prompt. The second option # is to change the 'Display Login Window as:' setting to 'Name and # password entry fields', which replaces the login panel with a # graphical login prompt. # # There are no function keys, at least not in Darwin 1.3. # # It has no mouse support. # # It has full ANSI color support, and color combines correctly with # all three supported attributes: bold, inverse-video and underline. # However, bold colored text is almost unreadable (bolding is # accomplished using shifting and or-ing, and looks smeared) so bold # has been excluded from the list of color-compatible attributes # [using (ncv)]. The monochrome entry (-m) is useful if you use a # monochrome monitor. # # There is one serious bug with this terminal emulation's color # support: repositioning the cursor onto a cell with non-matching # colors obliterates that cell's contents, replacing it with a blank # and displaying a colored cursor in the "current" colors. There is # no complete workaround at present [other than using the monochrome # (-m) entries,] but removing the (msgr) capability seemed to help. # # The "standout" chosen was simple reverse-video, although a colorful # standout might be more aesthetically pleasing. Similarly, the bold # chosen is the terminal's own smeared bold, although a simple # color-change might be more readable. The color-bold (-b) entries # uses magenta colored text for bolding instead. The fancy color (-f # and -f2) entries use color for bold, standout and underlined text # (underlined text is still underlined, though.) # # Apparently the terminal emulator does support a VT-100-style # alternate character set, but all the alternate character set # positions have been left blank in the font. For this reason, no # alternate character set capabilities have been included in this # description. The console driver appears to be ASCII-only, so (enacs) # has been excluded [although the VT-100 sequence does work.] # # The default Mac OS X and Darwin installation reports "vt100" as the # terminal type, and exports no helpful environment variables. To fix # this, change the "console" entry in /etc/ttys from "vt100" to # "xnuppc-WxH", where W and H are the character dimensions of your # console (see below.) # # The font used by the terminal emulator is apparently one originally # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This # file includes descriptions for the following geometries: # # Pixels Characters Entry Name (append -m for monochrome) # ------------------------------------------------------------------- # 640x400 80x25 xnuppc-80x25 # 640x480 80x30 xnuppc-80x30 # 720x480 90x30 xnuppc-90x30 # 800x600 100x37 xnuppc-100x37 # 896x600 112x37 xnuppc-112x37 # 1024x640 128x40 xnuppc-128x40 # 1024x768 128x48 xnuppc-128x48 # 1152x768 144x48 xnuppc-144x48 # 1280x1024 160x64 xnuppc-160x64 # 1600x1024 200x64 xnuppc-200x64 # 1600x1200 200x75 xnuppc-200x75 # 2048x1536 256x96 xnuppc-256x96 # # The basic "xnuppc" entry includes no size information, and the # emulator includes no reporting capability, so you'll be at the mercy # of the TTY device (which reports incorrectly on my hardware.) The # color-bold entries do not include size information. # The '+' entries are building blocks xnuppc+basic|Darwin PowerPC Console basic capabilities, am, bce, mir, xenl, it#8, bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+keypad, xnuppc+c|Darwin PowerPC Console ANSI color support, colors#8, ncv#32, pairs#64, op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, xnuppc+b|Darwin PowerPC Console color-bold support, ncv#32, bold=\E[35m, sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, use=xnuppc+basic, xnuppc+f|Darwin PowerPC Console fancy color support, ncv#35, sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m, smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, xnuppc+f2|Darwin PowerPC Console alternate fancy color support, ncv#35, bold=\E[33m, sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, # Building blocks for specific screen sizes xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels), cols#80, lines#25, xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels), cols#80, lines#30, xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels), cols#90, lines#30, xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels), cols#100, lines#37, xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels), cols#112, lines#37, xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels), cols#128, lines#40, xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels), cols#128, lines#48, xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels), cols#144, lines#48, xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels), cols#160, lines#64, xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels), cols#200, lines#64, xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels), cols#200, lines#75, xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels), cols#256, lines#96, # These are different combinations of the building blocks xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome), use=xnuppc+basic, xnuppc|darwin|Darwin PowerPC Console (color), use=xnuppc+c, use=xnuppc+basic, xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold), use=xnuppc+b, xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold), use=xnuppc+b, use=xnuppc+c, xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome), use=xnuppc+f, xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color), use=xnuppc+f, use=xnuppc+c, xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome), use=xnuppc+f2, xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color), use=xnuppc+f2, use=xnuppc+c, # Combinations for specific screen sizes xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25, use=xnuppc+80x25, use=xnuppc+basic, xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25, use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30, use=xnuppc+80x30, use=xnuppc+basic, xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30, use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30, use=xnuppc+90x30, use=xnuppc+basic, xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30, use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37, use=xnuppc+100x37, use=xnuppc+basic, xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37, use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37, use=xnuppc+112x37, use=xnuppc+basic, xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37, use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40, use=xnuppc+128x40, use=xnuppc+basic, xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40, use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48, use=xnuppc+128x48, use=xnuppc+basic, xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48, use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48, use=xnuppc+144x48, use=xnuppc+basic, xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48, use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64, use=xnuppc+160x64, use=xnuppc+basic, xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64, use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64, use=xnuppc+200x64, use=xnuppc+basic, xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64, use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75, use=xnuppc+200x75, use=xnuppc+basic, xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75, use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96, use=xnuppc+256x96, use=xnuppc+basic, xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96, use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, #### Radio Shack/Tandy # # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, OTbs, am, cols#80, it#8, lines#24, bel=^G, blink=^_", bold=\E\:^A, civis=^E\s, clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, sgr0=\037!\E\:\0, smso=^_\s, smul=^_", # (trs2: removed obsolete ":nl=^_:" -- esr) trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, OTbs, am, msgr, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\, kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, # From: Kevin Braunsdorf # (This had extension capabilities # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) trs16|trs-80 model 16 console, OTbs, am, cols#80, it#8, lines#24, acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, smacs=\ERG, smso=\ERD, #### Commodore Business Machines # # Formerly located in West Chester, PA; went spectacularly bust in 1994 # after years of shaky engineering and egregious mismanagement. Made one # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, # C-128, VIC-20). The C-64 is said to have been the most popular machine # ever (most units sold); they can still be found gathering dust in closets # everywhere. # # From: Kent Polk , 30 May 90 # Added a few more entries, converted caret-type control sequence (^x) entries # to '\0xx' entries since a couple of people mentioned losing '^x' sequences. # Corrections by Ty Sarna , Sat Feb 28 18:55:15 1998 # # :as:, :ae: Support for alternate character sets. # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) # This one appears to fix a problem I always had with a line ending # at 'width+1' (I think) followed by a blank line in vi. The blank # line tended to disappear and reappear depending on how the screen # was refreshed. Note that this is probably needed only if you use # something like a Dnet Fterm with the window sized to some peculiar # dimension larger than 80 columns. # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' # (amiga: removed obsolete :kn#10:, # also added empty to suppress a warning --esr) amiga|Amiga ANSI, OTbs, am, bw, xenl, cols#80, lines#24, acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, # From: Hans Verkuil , 4 Dec 1995 # (amiga: added empty to suppress a warning. # I'm told this entry screws up badly with AS225, the Amiga # TCP/IP package once from Commodore, and now sold by InterWorks.--esr) amiga-h|Hans Verkuil's Amiga ANSI, OTbs, bw, msgr, cols#80, lines#24, acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M, cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, smso=\2337m, smul=\2334m, # From: Henning 'Faroul' Peters , 25 Sep 1999 # # Pavel Fedin added # Home Shift+Left # End Shift+Right # PgUp Shift+Up # PgDn Shift+Down amiga-8bit|Amiga ANSI using 8-bit controls, acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S, kpp=\233T, ri=\215, rin@, use=amiga-h, # From: Ruediger Kuhlmann , 18 Jul 2000 # requires use of appropriate preferences settings. amiga-vnc|Amiga using VNC console (black on light gray), am, da, db, msgr, ndscr, btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256, bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p, clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, indn=\E[%p1%dS, invis=\E8m, is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~, kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec, rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m, setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m, sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h, smso=\E[1m, smul=\E[4m, # MorphOS on Genesi Pegasos # By Pavel Fedin morphos, acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~, khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~, ri=\215, rin@, use=amiga-h, # Commodore B-128 microcomputer from Doug Tyrol # I'm trying to write a termcap for a commodore b-128, and I'm # having a little trouble. I've had to map most of my control characters # to something that unix will accept (my delete-char is a ctrl-t, etc), # and create some functions (like cm), but thats life. # The problem is with the arrow keys - right, and up work fine, but # left deletes the previous character and down I just can't figure out. # Jove knows what I want, but I don't know what it's sending to me (it # isn't thats bound to next-line in jove). # Anybody got any ideas? Here's my termcap. # DAG -- I changed his "^n" entries to "\n"; see if that works. # commodore|b-128|Commodore B-128 micro, am, bw, OTdN#20, cols#80, lines#24, pb#150, OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J, cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, smir=, #### North Star # # North Star Advantage from Lt. Fickie via BRL northstar|North Star Advantage, OTbs, cols#80, lines#24, clear=\004$<200/>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, el=\016$<200/>, home=\034\032$<200/>, #### Osborne # # Thu Jul 7 03:55:16 1983 # # As an aside, be careful; it may sound like an anomaly on the # Osborne, but with the 80-column upgrade, it's too easy to # enter lines >80 columns! # # I've already had several comments... # The Osborne-1 with the 80-col option is capable of being # 52, 80, or 104 characters wide; default to 80 for compatibility # with most systems. # # The tab is destructive on the Ozzie; make sure to 'stty -tabs'. osborne-w|osborne1-w|osborne I in 104-column mode, msgr, ul, xt, cols#104, lines#24, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, # Osborne I from ptsfa!rhc (Robert Cohen) via BRL osborne|osborne1|osborne I in 80-column mode, OTbs, am, mir, msgr, ul, xhp, OTdB#4, cols#80, lines#24, clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), rmul=\Em, smir=\EQ, smso=\E(, smul=\El, # # Osborne Executive definition from BRL # Similar to tvi920 # Added by David Milligan and Tom Smith (SMU) osexec|Osborne executive, OTbs, am, OTug#1, cols#80, lines#24, xmc#1, OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, smul=\El, tbc=\E3, #### Console types for obsolete UNIX clones # # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix # were commercial, Minix an educational tool sold in conjunction with a book. # Memory-segmentation limits and a strong tendency to look like V7 long after # it was obsolete made all three pretty lame. Venix croaked early. Coherent # and Minix were ported to 32-bit Intel boxes, only to be run over by a # steamroller named `Linux' (which, to be fair, traces some lineage to Minix). # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There # are also, I'm told, Minix ports that ran on Amiga and Atari machines and # even as single processes under SunOS and the Macintosh OS. # # See # http://www.minix3.org/manpages/man4/console.4.html minix|minix console (v3), acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~, kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~, kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~, kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~, kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~, kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~, kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~, kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~, kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~, kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@, use=minix-3.0, minix-3.0|minix console (v3.0), use=ecma+color, use=minix-1.7, # See # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html # This is the entry provided with minix 1.7.4, with bogus :ri: removed. minix-1.7|minix console (v1.7), am, xenl, cols#80, it#8, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, # Corrected Jan 14, 1997 by Vincent Broman minix-old|minix-1.5|minix console (v1.5), xon, cols#80, it#8, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, # The linewrap option can be specified by editing /usr/include/minix/config.h # before recompiling the minix 1.5 kernel. minix-old-am|minix console with linewrap, am, use=minix-old, pc-minix|minix console on an Intel box, use=klone+acs, use=minix-3.0, # According to the Coherent 2.3 manual, the PC console is similar # to a z19. The differences seem to be (1) 25 lines, (2) no status # line, (3) standout is broken, (4) ins/del line is broken, (5) # has blinking and bold. pc-coherent|pcz19|coherent|IBM PC console running Coherent, am, mir, cols#80, it#8, lines#25, bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, # According to the Venix 1.1 manual, the PC console is similar # to a DEC vt52. Differences seem to be (1) arrow keys send # different strings, (2) enhanced standout, (3) added insert/delete line. # Note in particular that it doesn't have automatic margins. # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they # not described here because this derives from an old termcap entry. pc-venix|venix|IBM PC console running Venix, cols#80, it#8, lines#25, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK, kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, #### Miscellaneous microcomputer consoles # # If you know anything more about any of these, please tell me. # # The MAI Basic Four computer was obsolete at the end of the 1980s. # It may be used as a terminal by putting it in "line" mode as seen on # one of the status lines. # Initialization is similar to CIT80. will set ANSI mode for you. # Hardware tabs set by at 8-spacing. Auto line wrap causes glitches so # wrap mode is reset by . Using =\E[S caused errors so I # used \ED instead. # From: bf347@lafn.org (David Lawyer), 28 Jun 1997 mai|basic4|MAI Basic Four in ansi mode, am, da, db, mir, msgr, cols#82, it#8, lines#25, bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED, is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, # basis from Peter Harrison, Computer Graphics Lab, San Francisco # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA # # On Sat, 7 Aug 1999, Torsten Jerzembeck wrote: # The Basis 108 was a Apple II clone, manufactured by the "Basis # Mikrocomputer GmbH" in Munster, Germany (the company still exists today, # about 1,5 km from where I live, but doesn't build own computers any # more). A Basis 108 featured a really heavy (cast aluminium?) case, was # equipped with one or two 5.25" disk drives, had a monochrome and colour # video output for a TV set or a dedicated monitor and several slots for # Apple II cards. Basis 108 were quite popular at german schools before # the advent of the IBM PC. They run, for example, the UCSD Pascal # development system (which I used even in 1993 to program the steering # and data recording for our school's experimental solar panel :), Apple DOS # or CP/M. # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) basis|BASIS108 computer with terminal translation table active, clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), smso=\E(, use=adm3a, # luna's BMC terminal emulator luna|luna68k|LUNA68K Bitmap console, cols#88, lines#46, use=ansi-mini, megatek|pegasus workstation terminal emulator, am, os, cols#83, lines#60, # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived # interface (pre-Macintosh by several years) that went nowhere. xerox820|x820|Xerox 820, am, cols#80, lines#24, bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, home=^^, ind=^J, #### Videotex and teletext # # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) # \E[?3l 80 columns # \E[?4l scrolling on # \E[12h local echo off # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen # \E)0 G1 DEC set (line graphics) # # From: Igor Tamitegama , 18 Jan 1997 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, OTbs, eslok, hs, xenl, cols#80, it#8, lines#24, wsl#72, xmc#0, acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, u6=\E[%i%d;%dR, u7=\E[6n, # From: Alexandre Montaron , 18 Jun 1998 # minitel1|minitel 1, am, bw, eslok, hs, hz, msgr, colors#8, cols#40, lines#24, pairs#8, acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L, cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X, enacs=^Y, fsl=^J, home=^^, ind=^J, is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG, rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\, setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;, sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c, # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON. minitel1b|minitel 1-bistandard (in 40cols mode), mir, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l, smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1, # posait des problemes (logout en sortant de vi). minitel1b-80|minitel 1-bistandard (standard teleinformatique), am@, bw@, hz@, colors@, cols#80, it#8, pairs@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@, sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b, ######## OBSOLETE VDT TYPES # # These terminals are *long* dead -- these entries are retained for # historical interest only. #### Amtek Business Machines # # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", # but these caps were commented out in 8.3; also, removed overridden # ":do=^J:" -- esr) abm80|amtek business machines 80, OTbs, am, bw, cols#80, lines#24, cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, #### Bell Labs blit terminals # # These were AT&T's official entries. The 5620 FAQ maintained by # David Breneman has this to say: # # Actually, in the beginning was the Jerq, and the Jerq was white with a # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq # was good. But lo, upon the horizon loomed a mighty management-type person # (known now only by the initials VP) who said, the mighty Jerq must stay # alone, and could not go forth into the world. So Locanthi and Pike put the # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the # world. And the Jerq lived the rest of its days in research, but never # strayed from those paths. # # In all seriousness, the Blit was originally known as the Jerq, but when # it started to be shown outside of the halls of the Bell Labs Research # organization, the management powers that be decided that the name could # not remain. So it was renamed to be Blit. This was in late 1981. # # (The AT&T 5620 was the commercialized Blit. Its successors were the 630, # 730, and 730+.) # blit|jerq|blit running teletype rom, am, eo, ul, xon, cols#87, it#8, lines#72, bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, # (cbblit: here's a BSD termcap that says -- esr) cbblit|fixterm|blit running columbus code, cols#88, ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, smul=\EU", use=blit, oblit|ojerq|first version of blit rom, am, da, db, eo, mir, ul, xon, cols#88, it#8, lines#72, bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER, smir=\EQ, #### Bolt, Beranek & Newman (bbn) # # The BitGraph was a product of the now-defunct BBN Computer Corporation. # The parent company, best known as the architects of the Internet, is # still around. # # Jeff DelPapa writes: # The bitgraph was a large white box that contained a monochrome bitmap # display, and a 68000 to run it. You could download code and run it on # the cpu, it had 128kb (I think) of memory. I used one in the late # 70's, sure beat a vt100. It had one strange feature tho -- it used # the cpu to bitblt pixels to scroll, it took longer than the refresh # rate, and looked like a rubber sheet stretching, then snapping # upwards. It had everything the early mac had, except a floppy drive a # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt # Beranek and Neuman) sold at most a few hundred of them to the real # world. DOD may have bought more... # # Entries for the BitGraph terminals. The problem # with scrolling in vi can only be fixed by getting BBN to put # smarter scroll logic in the terminal or changing vi or padding # scrolls with about 500 ms delay. # # I always thought the problem was related to the terminal # counting newlines in its input buffer before scrolling and # then moving the screen that much. Then vi comes along and # paints lines in on the bottom line of the screen, so you get # this big white gap. bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video), flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg2.0, bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video), flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg2.0, bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init), OTbs, xenl, cols#85, lines#64, bel=^G, clear=\E[H\E[J$<150>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, sgr0=\E[m, smkx=\E=, smso=\E[7m, bg1.25rv|bbn bitgraph 1.25 (reverse video), flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25, bg1.25nv|bbn bitgraph 1.25 (normal video), flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg1.25, # (bg1.25: I added / based on the init string -- esr) bg1.25|bbn bitgraph 1.25, cols#85, lines#64, bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, smso=\E[7m, #### Bull (bq, dku, vip) # # (Adapted for terminfo; AIX extension capabilities translated -- esr) #============================================# # BULL QUESTAR 210 `SDP' terminals emulation # #============================================# # # Description written by R.K.Saunders (Bull Transac) # # Modifications written by F. Girard (Bull MTS) # 19-05-87 V02.00.01 # 17-12-87 V02.00.02 # 15-09-89 V02.00.05 # # Typical technical selections F1 (modes SDP/ROLL): # ------------------------------------------------------- # | 01 02 03 04 05 06 07 08 09 10 | # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | # | | # | 11 12 13 14 15 16 17 18 19 20 | # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | # | | # | 21 22 23 24 25 26 27 28 29 30 | # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | # | | # | 31 32 33 34 35 36 37 38 39 40 | # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | # ------------------------------------------------------- # Typical firmware identification F5 "etat 6": # P287.02.04b (AZERTY) # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) # P298.03.03 (monochrome) or P374.03.02 (colour) # # SM SDP mode (VIP command): ^[[?=h # RIS (erases screen): ^[c # DMI disable keyboard: ^[` # SM double rendition mode: ^[[?>h # RM solicited status mode: ^[[5l # RM character mode: ^[[>l # RM echoplex mode: ^[[12l # RM column tab mode: ^[[18l # RM forbid SS2 keyboard mode: ^[[?h\EPY99\:98\E\\, is2=\E[5;>;12;18;?h\EPY99\:98\E\\, smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m, tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA, dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, use=tws-generic, tws2103|xdku|BULL Questar tws2103, ht=^I, use=tws-generic, tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA, ht=^I, use=tws2102-sna, dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6), clear=\E[2J\E[H, cup@, dl@, dl1@, dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m, use=tws-generic, dku7202|BULL Questar 200 DKU7202 (colour/character attributes), blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic, #=========================================================# # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # #=========================================================# # # Description written by J. Staerck (BULL SA) # Copyright (c) 1989 BULL SA #--------------------------------------------------------------------------- # This entry is used for terminals with vt320 emulation mode # and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), # 7 bit Control Characters, # 80 columns screen. # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) # They are used in string capabilities with vt220-320 emulation mode. # In the following DEC definitions, two kinds of terminfo databases are # provided : # 1. the first with Command Sequence Introducer starting with escape # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. # 2. the second with Command Sequence Introducer starting with escape # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. # Soft Terminal Reset esc [ ! p # RIS (erases screen): esc c # DECKPNM numeric keypad mode: esc > # DECKPAM applic. keypad mode: esc = # DECSTBM Scrolling region: esc [ r # SCS select G0 = US: esc ( B # SCS select G1 = line-graphic: esc ) 0 # Select 7-bit C1 controls: esc sp F # Select 8-bit C1 controls: esc sp G # Select cursor home: esc [ H # Select erase screen: esc [ J # SM KAM lock keyboard: esc [ 2 h # RM KAM unlock keyboard: esc [ 2 l # SM SRM local echo off: esc [ 1 2 h # RM SRM local echo on: esc [ 1 2 l # SM LNM New line : esc [ 2 0 h # RM LNM return = CR only: esc [ 2 0 l # SM DECCKM cursor keys mode: esc [ ? 1 h # RM DECCKM appli. keys mode: esc [ ? 1 l # SM DECANM ANSI mode on: esc [ ? 2 h # RM DECANM ANSI mode off: esc [ ? 2 l # SM DECCOLM 132-column screen: esc [ ? 3 h # RM DECCOLM 80-column screen: esc [ ? 3 l # SM DECSCLM Smooth scroll: esc [ ? 4 h # RM DECSCLM Jump scroll: esc [ ? 4 l # SM DECSCNM screen light backgr. esc [ ? 5 h # RM DECSCNM screen dark backgr. esc [ ? 5 l # SM DECOM move within margins: esc [ ? 6 h # RM DECOM move outside margins: esc [ ? 6 l # SM DECAWM auto right margin: esc [ ? 7 h # RM DECAWM auto right margin: esc [ ? 7 l # SM DECARM auto repeat: esc [ ? 8 h # RM DECARM auto repeat: esc [ ? 8 l # DECSASD Select active main: esc [ 0 $ } # DECSASD Select active status: esc [ 1 $ } # DECSSDT Select status none: esc [ 0 $ ~ # DECSSDT Select status indic.: esc [ 1 $ ~ # DECSSDT Select status host-wr: esc [ 2 $ ~ # SM DECTCEM Visible cursor: esc [ ? 2 5 h # RM DECTCEM Invisible cursor: esc [ ? 2 5 l # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l # SM DECNKM numeric keypad mode: esc [ ? 6 6 h # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l # SM DECKBUM clavier informatique esc [ ? 6 8 h # RM DECKBUM clavier bureautique: esc [ ? 6 8 l # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p # Char. and Line attributes: esc [ Ps ... Ps m # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off # # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 bq300|Bull vt320 ISO Latin 1 80 columns terminal, am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, is1=\E[63;1"p\E[2h, is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, bq300-rv|Bull vt320 reverse 80 columns, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300, bq300-w|Bull vt320 132 columns, cols#132, wsl#132, is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, rs2=\E[?3h, use=bq300, bq300-w-rv|Bull vt320 reverse mode 132 columns, cols#132, wsl#132, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, rs2=\E[?3h, use=bq300, # This entry is used for terminals with vt320 emulation mode # and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), # 8 bit Control Characters, (CSI coded as x9B for ESC [) # 80 columns screen. # Soft Terminal Reset csi ! p # RIS (erases screen): esc c # DECKPNM numeric keypad mode: esc > # DECKPAM applic. keypad mode: esc = # DECSTBM Scrolling region: esc [ r # SCS select G0 = US: esc ( B # SCS select G1 = line-graphic: esc ) 0 # Select 7-bit C1 controls: esc sp F # Select 8-bit C1 controls: esc sp G # Select cursor home: csi H # Select erase screen: csi J # SM KAM lock keyboard: csi 2 h # RM KAM unlock keyboard: csi 2 l # SM SRM local echo off: csi 1 2 h # RM SRM local echo on: csi 1 2 l # SM LNM New line : csi 2 0 h # RM LNM return = CR only: csi 2 0 l # SM DECCKM cursor keys mode: csi ? 1 h # RM DECCKM appli. keys mode: csi ? 1 l # SM DECANM ANSI mode on: csi ? 2 h # RM DECANM ANSI mode off: csi ? 2 l # SM DECCOLM 132-column screen: csi ? 3 h # RM DECCOLM 80-column screen: csi ? 3 l # SM DECSCLM Smooth scroll: csi ? 4 h # RM DECSCLM Jump scroll: csi ? 4 l # SM DECSCNM screen light backgr. csi ? 5 h # RM DECSCNM screen dark backgr. csi ? 5 l # SM DECOM move within margins: csi ? 6 h # RM DECOM move outside margins: csi ? 6 l # SM DECAWM auto right margin: csi ? 7 h # RM DECAWM auto right margin: csi ? 7 l # SM DECARM auto repeat: csi ? 8 h # RM DECARM auto repeat: csi ? 8 l # DECSASD Select active main: csi 0 $ } # DECSASD Select active status: csi 1 $ } # DECSSDT Select status none: csi 0 $ ~ # DECSSDT Select status indic.: csi 1 $ ~ # DECSSDT Select status host-wr: csi 2 $ ~ # SM DECTCEM Visible cursor: csi ? 2 5 h # RM DECTCEM Invisible cursor: csi ? 2 5 l # SM DECNCRM 7 bits NCR set: csi ? 4 2 h # RM DECNCRM Multi or ISO latin: csi ? 4 2 l # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p # Char. and Line attributes: csi Ps ... Ps m # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off # (bq300-8: ,,,,, to get under 1024 --esr) bq300-8|Bull vt320 full 8 bits 80 columns, am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, wsl#80, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l, clear=\233H\233J, cnorm=\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D, cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E(B\E)0, flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED, is1=\E[63;2"p\E[2h, is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, sgr0=\2330m\E(B, smacs=^N, smam=\233?7h, smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, bq300-8rv|Bull vt320 8-bit reverse mode 80 columns, flash=\233?5l$<50>\233?5h, is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8, bq300-8w|Bull vt320 8-bit 132 columns, cols#132, wsl#132, is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, rs2=\233?3h, use=bq300-8, bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns, cols#132, wsl#132, flash=\233?5l$<50>\233?5h, is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, rs2=\233?3h, use=bq300-8, # This entry is used for terminals with vt320 emulation mode # a 102 keys keyboard (PC scancode !) and following set-up : # 8 bit ISO Latin Character Set (ISO 8859-1), # 7 bit Control Characters, # 80 columns screen. bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300, bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300-pc, bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, cols#132, wsl#132, is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, rs2=\E[?3h, use=bq300-pc, bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, cols#132, wsl#132, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, rs2=\E[?3h, use=bq300-pc, # 8 bit ISO Latin Character Set (ISO 8859-1), # 8 bit Control Characters, # 80 columns screen. bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~, kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@, kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@, khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8, bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8-pc, bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, cols#132, wsl#132, is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, rs2=\E[?3h, use=bq300-8-pc, bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, cols#132, wsl#132, flash=\E[?5l$<50>\E[?5h, is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, rs2=\E[?3h, use=bq300-8-pc, #======================================================# # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # #======================================================# # normal mode, 8 bits, 80 columns terminal. # RES reset : ^[e # RIS reset initial state: ^[c # BLE bell enable ^[h # BLD bell disable ^[g # CAMS char. attr. mode set ^[[D # CAMR char. attr. mode reset ^[[G # CLR clear ^[` # KBU keyboard unlock (set) ^[[W # KBL keyboard lock (reset) ^[[X # CM character mode (async.) ^[k # NEP non echoplex mode (by host) ^[l # EP echoplex mode (by host) ^[m # IM insert mode set ^[[I # IM insert mode reset ^[[J # RMS roll mode set ^[r # RMR roll mode reset ^[q # SM78 set mode vip7800 ^[[1q # SD scroll up (72 lines) ^[[0s # SD scroll down (72 lines) ^[[1s # RBM block mode reset ^[[E # SLS status line set ^[w # SLR status line reset ^[v # SLL status line lock ^[O # LGS Line-graphic mode set ^[G # LGR Line-graphic mode reset ^[F # TBC tab clear (at cursor pos.) ^[[g # TBI tab initialize ^[[N # TBS tab set (at cursor pos.) ^[p # PDS print data space ^[[0p # PHD print host data ^[[3p # PDT print data terminator ^[[

u # SSP0 partition 0 set ^[[00u # SSP1 partition n format 1 ^[[PnPnSTRINGu # SSP2 partition n format 2 ^[[PnPnSTRINGu # SSP3 partition n format 3 ^[[PnPnu # ATR attribute (visual) # blink : ^[sB # dim : ^[sL # hide (blank) : ^[sH # restore : ^[sR # inverse video : ^[sI # prot. : ^[sP # underline : ^[s_ # reset : ^{ # # This covers the vip7800 and BQ3155-vip7800 vip|Bull Questar 3155-7800, am, eslok, hs, km, mc5i, msgr, xenl, xon, cols#80, it#8, lines#24, vt#3, wsl#80, acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH, is2=\E[00u\E[<>001001024080024080u\E[01u, is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[, rmacs=\EF, rmir=\E[J, rmso=\EsR, rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, smul=\Es_, tbc=\E[N, tsl=\Ew, # normal screen, 8 bits, 132 columns terminal. vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, cols#132, wsl#132, is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, lines#72, is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, cols#132, lines#72, wsl#132, is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, #### Chromatics # # I have put the long strings in /. Ti sets up a window # that is smaller than the screen, and puts up a warning message # outside the window. Te erases the warning message, puts the # window back to be the whole screen, and puts the cursor at just # below the small window. I defined and to really turn # the cursor on and off, but I have taken this out since I don't # like the cursor being turned off when vi exits. cg7900|chromatics|chromatics 7900, am, cols#80, lines#40, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^], cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|, rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,, rmso=\001C1\,\001c2\,, smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,, smso=\001C4\,\001c7\,, uc=\001\001_\001\0, #### Computer Automation # ca22851|computer automation 22851, am, cols#80, lines#24, bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I, cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J, kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, #### Cybernex # # This entry has correct padding and the undocumented "ri" capability cyb83|xl83|cybernex xl-83, OTbs, am, cols#80, lines#24, bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N, # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) cyb110|mdl110|cybernex mdl-110, OTbs, am, cols#80, lines#24, bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, ht=\011$<43>, ich1=\016A\035$<3.5>, il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF, #### Datapoint # # Datapoint is gone. They used to be headquartered in Texas. # They created ARCnet, an Ethernet competitor that flourished for a while # in the early 1980s before 3COM got wise and cut its prices. The service # side of Datapoint still lives (1995) in the form of Intelogic Trace. # dp3360|datapoint|datapoint 3360, OTbs, am, cols#82, lines#25, bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, ed=^_, el=^^, home=^], ind=^J, # From: Jan Willem Stumpel , 11 May 1997 # The Datapoint 8242 Workstation was sold at least between 1985 # and 1989. To make the terminal work with this entry, press # CONTROL-INT-INT to take the terminal off-line, and type (opt). # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO # CR/LF off. Use control-shift-[] as escape key, control-I as tab, # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in # fact unusable because the strings sent by the terminal conflict # with other keys). # The terminal is capable of displaying "box draw" characters. # For each graphic character you must send 2 ESC's (\E\E) followed # by a control character as follows: # character meaning # ========= ======= # ctrl-E top tee # ctrl-F right tee # ctrl-G bottom tee # ctrl-H left tee # ctrl-I cross # ctrl-J top left corner # ctrl-K top right corner # ctrl-L bottom left corner # ctrl-M bottom right corner # ctrl-N horizontal line # ctrl-O vertical line # Unfortunately this cannot be fitted into the termcap/terminfo # description scheme. dp8242|datapoint 8242, msgr, cols#80, lines#25, bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X, cr=^M, cub1=^H, cud1=^J, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C, is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea, kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J, rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, smso=\E^E, smul=\E^F, wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025, #### DEC terminals (Obsolete types: DECwriter and vt40/42/50) # # These entries are DEC's official terminfos for its older terminals. # Contact Bill Hedberg of Terminal Support # Engineering for more information. Updated terminfos and termcaps # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. # gt40|dec gt40, OTbs, os, cols#72, lines#30, bel=^G, cr=^M, cub1=^H, cud1=^J, gt42|dec gt42, OTbs, os, cols#72, lines#40, bel=^G, cr=^M, cub1=^H, cud1=^J, vt50|dec vt50, OTbs, cols#80, lines#12, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, vt50h|dec vt50h, OTbs, cols#80, lines#12, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, ri=\EI, # (vt61: there's a BSD termcap that claims , ) vt61|vt-61|vt61.5|dec vt61, cols#80, lines#24, bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J, cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\E$<20>I, # The gigi does standout with red! # (gigi: I added / based on the init string, corrected cub1 -- esr) gigi|vk100|dec gigi graphics terminal, OTbs, am, xenl, cols#84, lines#24, bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, el=\E[K, ht=^I, ind=^J, is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, smul=\E[4m, # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce # a PC differentiated from the IBM clones. It was a total, ludicrous, # grossly-overpriced failure (among other things, DEC's OS didn't include # a format program, so you had to buy pre-formatted floppies from DEC at # a hefty premium!). pro350|decpro|dec pro console, OTbs, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, dw1|decwriter I, OTbs, hc, os, cols#72, bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, dw2|decwriter|dw|decwriter II, OTbs, hc, os, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, # \E(B Use U.S. character set (otherwise # => british pound !) # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) # \E[w 10 char/in pitch # \E[1;132 full width horizontal margins # \E[2g clear all tab stops # \E[z 6 lines/in # \E[66t 66 lines/page (for \f) # \E[1;66r full vertical page can be printed # \E[4g clear vertical tab stops # \E> disable alternate keypad mode (so it transmits numbers!) # \E[%i%p1%du set tab stop at column %d (origin == 1) # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is # a tab stop) # # The dw3 does standout with wide characters. # dw3|la120|decwriter III, OTbs, hc, os, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r, kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, dw4|decwriter IV, OTbs, am, hc, os, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, # These aren't official ln03|dec ln03 laser printer, hc, cols#80, lines#66, bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J, rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, smul=\E[4m, ln03-w|dec ln03 laser printer 132 cols, cols#132, bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=ln03, #### Delta Data (dd) # # Untested. The cup sequence is hairy enough that it probably needs work. # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. # There are BSD-derived termcap entries floating around for this puppy # that are *certainly* wrong. delta|dd5000|delta data 5000, OTbs, am, cols#80, lines#27, bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y, cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c, cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J, #### Digital Data Research (ddr) # # (ddr: I added / based on the init string -- esr) ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, OTbs, am, xenl, cols#80, it#8, lines#24, vt#3, blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m$<2/>, #### Evans & Sutherland # # Jon Leech tells us: # The ps300 was the Evans & Sutherland Picture System 300, a high # performance 3D vector graphics system with a bunch of specialized hardware. # Approximate date of release was 1982 (early 80s, anyway), and it had several # evolutions including (limited) color versions such as the PS330C. PS300s # were effectively obsolete by the late 80s, replaced by raster graphics # systems, although specialized applications like molecular modelling # hung onto them for a while longer. AFAIK all E&S vector graphics systems # are out of production, though of course E&S is very much alive (in 1996). # (ps300: changed ":pt@:" to "it@" -- esr) # ps300|Picture System 300, xt, it@, rmso@, rmul@, smso@, smul@, use=vt100, #### General Electric (ge) # terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, OTbs, hc, os, cols#120, bel=^G, cr=^M, cud1=^J, ind=^J, #### Heathkit/Zenith # # Here is a description of the H19 DIP switches: # # S401 # 0-3 = baud rate as follows: # # 3 2 1 0 # --- --- --- --- # 0 0 1 1 300 baud # 0 1 0 1 1200 baud # 1 0 0 0 2400 baud # 1 0 1 0 4800 baud # 1 1 0 0 9600 baud # 1 1 0 1 19.2K baud # # 4 = parity (0 = no parity) # 5 = even parity (0 = odd parity) # 6 = stick parity (0 = normal parity) # 7 = full duplex (0 = half duplex) # # S402 # 0 = block cursor (0 = underscore cursor) # 1 = no key click (0 = keyclick) # 2 = wrap at end of line (0 = no wrap) # 3 = auto LF on CR (0 = no LF on CR) # 4 = auto CR on LF (0 = no CR on LF) # 5 = ANSI mode (0 = VT52 mode) # 6 = keypad shifted (0 = keypad unshifted) # 7 = 50Hz refresh (1 = 60Hz refresh) # # Factory Default settings are as follows: # 7 6 5 4 3 2 1 0 # S401 1 0 0 0 1 1 0 0 # S402 0 0 0 0 0 0 0 0 # (h19: I added / based on the init string; # also added empty to suppress a tic warning -- esr) h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode, OTbs, am, mir, msgr, cols#80, it#8, lines#24, acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J, is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, h19-bs|heathkit w/keypad shifted, rmkx=\Eu, smkx=\Et, use=h19-b, h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor, rmkx=\Eu, smkx=\Et, use=h19-u, # (h19: merged in from BSDI hp19-e entry>; # also added empty to suppress a tic warning --esr) # From: Tim Pierce , 23 Feb 1998 # Tim tells us that: # I have an old Zenith-19 terminal at home that still gets a lot of use. # This terminal suffers from the same famous insert-mode padding lossage # that has been acknowledged for the Z29 terminal. Emacs is nearly # unusable on this box, since even a half-scroll up or down the window # causes flaming terminal death. # # On the Z19, the only way I have found around this problem is to remove # the :al: and :dl: entries entirely. No amount of extra padding will # help (I have tried up to 20000). Removing and # makes Emacs a little slower, but it remains in the land of the living. # Big win. h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, OTbs, am, eslok, hs, mir, msgr, cols#80, it#8, lines#24, acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, h19-u|heathkit with underscore cursor, cnorm@, cvvis@, use=h19-b, h19-g|h19g|heathkit w/block cursor, cnorm=\Ex4, cvvis@, use=h19-b, alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19, lines#60, dl1=\EM, il1=\EL, use=h19, # The major problem with the Z29 is that it requires more padding than the Z19. # # The problem with declaring an H19 to be synonymous with a Z29 is that # it needs more padding. It especially loses if a program attempts # to put the Z29 into insert mode and insert text at 9600 baud. It # even loses worse if the program attempts to insert tabs at 9600 # baud. Adding padding to text that is inserted loses because in # order to make the Z29 not die, one must add so much padding that # whenever the program tries to use insert mode, the effective # rate is about 110 baud. # # What program would want to put the terminal into insert mode # and shove stuff at it at 9600 baud you ask? # # Emacs. Emacs seems to want to do the mathematically optimal # thing in doing a redisplay rather than the practical thing. # When it is about to output a line on top of a line that is # already on the screen, instead of just killing to the end of # the line and outputting the new line, it compares the old line # and the new line and if there are any similarities, it # constructs the new line by deleting the text on the old line # on the terminal that is already there and then inserting new # text into the line to transform it into the new line that is # to be displayed. The Z29 does not react kindly to this. # # But don't cry for too long.... There is a solution. You can make # a termcap entry for the Z29 that says the Z29 has no insert mode. # Then Emacs cannot use it. "Oh, no, but now inserting into a # line will be really slow", you say. Well there is a sort of a # solution to that too. There is an insert character option on # the Z29 that will insert one character. Unfortunately, it # involves putting the terminal into ansi mode, inserting the # character, and changing it back to H19 mode. All this takes 12 # characters. Pretty expensive to insert one character, but it # works. Either Emacs doesn't try to use its inserting hack when # it's only given an insert character ability or the Z29 doesn't # require padding with this (the former is probably more likely, # but I haven't checked it out). # (z29: added empty to suppress a tic warning, merged in # status line capabilities from BRL entry --esr) z29|zenith29|z29b|zenith z29b, OTbs, OTpt, am, eslok, hs, mir, msgr, OTkn#10, cols#80, lines#24, OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, # z29 in ansi mode. Assumes that the cursor is in the correct state, and that # the world is stable. causes the terminal to be reset to the state # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore # cursor, bc -> block cursor. # From: Mike Meyers # (z29a: replaced nonexistent befause # looks vt100-compatible -- esr) z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, OTbs, OTpt, am, eslok, hs, mir, msgr, OTkn#10, cols#80, it#8, lines#24, OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL, ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h, rmso=\E[m, rmul=\E[m, rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m, use=z29a, z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m, use=z29a, z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m, use=z29a, # From: Jeff Bartig 31 Mar 1995 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, am, eslok, hs, mc5i, mir, msgr, xon, cols#80, lines#24, acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[s\E[>1h\E[25;%i%p1%dH, # From: Brad Brahms z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw, # (z100bw: removed obsolete ":kn#10:", added empty -- esr) z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, OTbs, OTpt, mir, msgr, OTkn#10, cols#80, it#8, lines#24, acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, smir=\E@, smso=\Ep, p19|h19-b with il1/dl1, dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, # From: # (ztx: removed duplicate :sr: -- esr) ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, OTbs, am, eslok, hs, cols#80, it#8, lines#24, clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, #### IMS International (ims) # # There was a company called IMS International located in Carson City, # Nevada, that flourished from the mid-70s to mid-80s. They made S-100 # bus/Z80 hardware and a line of terminals called Ultimas. # # From: Erik Fair Sun Oct 27 07:21:05 1985 ims950-b|bare ims950 no init string, is2@, use=ims950, # (ims950: removed obsolete ":ko@:" -- esr) ims950|ims televideo 950 emulation, xenl@, flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950, # (ims950-rv: removed obsolete ":ko@:" -- esr) ims950-rv|ims tvi950 rev video, xenl@, flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv, ims-ansi|ultima2|ultimaII|IMS Ultima II, OTbs, am, cols#80, it#8, lines#24, clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, ht=^I, if=/usr/share/tabset/vt100, is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, #### Intertec Data Systems # # I think this company is long dead as of 1995. They made an early CP/M # micro called the "Intertec Superbrain" that was moderately popular, # then sank out of sight. # superbrain|intertec superbrain, OTbs, am, bw, cols#80, lines#24, OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, # and the reverse is actually true. Try it. -- esr) intertube|intertec|Intertec InterTube, OTbs, am, cols#80, lines#25, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, ind=^J, rmso=\E0@, smso=\E0P, # The intertube 2 has the "full duplex" problem like the tek 4025: if you # are typing and a command comes in, the keystrokes you type get interspersed # with the command and it messes up intertube2|intertec data systems intertube 2, OTbs, cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ll=^K^X\r, vpa=\013%p1%c, use=intertube, #### Ithaca Intersystems # # This company made S100-bus personal computers long ago in the pre-IBM-PC # past. They used to be reachable at: # # Ithaca Intersystems # 1650 Hanshaw Road # Ithaca, New York 14850 # # However, the outfit went bankrupt years ago. # # The Graphos III was a color graphics terminal from Ithaca Intersystems. # These entries were written (originally in termcap syntax) by Brian Yandell # and Mike Meyer at the # University of Wisconsin. # (graphos: removed obsolete and syntactically incorrect :kn=4:, # removed and # no such file & no -- esr) graphos|graphos III, am, mir, cols#80, it#8, lines#24, clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l, rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, smir=\E[4h, smso=\E[7m, graphos-30|graphos III with 30 lines, lines#30, cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, #### Modgraph # # These people used to be reachable at: # # Modgraph, Inc # 1393 Main Street, # Waltham, MA 02154 # Vox: (617)-890-5796. # # However, if you call that number today you'll get an insurance company. # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated # 26 Feb 1997 that says: # # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been # for ~7 years. Modgraph still in business. Products are rugged laptop and # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount # panel-mount etc). I can be emailed at sonfour@aol.com # # Peter D. Smith notes that his modgraph manual was # dated 1984. According to the manual, it featured Tek 4010/4014 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. # modgraph|mod24|modgraph terminal emulating vt100, xenl@, cols#80, lines#24, cvvis=\E\^9;0s\E\^7;1s, is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, rf@, ri=\EM\E[K$<5/>, use=vt100, # The GX-1000 manual is dated 1984. This looks rather like a VT-52. modgraph2|modgraph gx-1000 80x24 with keypad not enabled, am, da, db, cols#80, it#8, lines#24, clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>, cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, ri=\EI$<5/>, # # Modgraph from Nancy L. Cider # BUG NOTE from Barbara E. Ringers : # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a # mark and using delete-to-killbuffer work correctly. However, we would # like normal mode of operation to be using a Modgraph with 48 line setting. # If we set TERM=mod (which is a valid entry in termcap with 48 lines) # the setting mark and delete-to-killbuffer results in the deletion of only # the line the mark is set on. # We've discovered that the delete-to-killbuffer works correctly # with TERM=mod and screen set to 80x48 but it's not obvious. Only # the first line disappears but a ctrl-l shows that it did work # correctly. modgraph48|mod|Modgraph w/48 lines, OTbs, OTpt, am, xenl, cols#80, it#8, lines#48, vt#3, OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, #### Morrow Designs # # This was George Morrow's company. They started in the late 1970s making # S100-bus machines. They used to be reachable at: # # Morrow # 600 McCormick St. # San Leandro, CA 94577 # # but they're long gone now (1995). # # The mt70 terminal was shipped with the Morrow MD-3 microcomputer. # Jeff's specimen was dated June 1984. # From: Jeff Wieland 24 Feb 1995 mt70|mt-70|Morrow MD-70; native Morrow mode, am, mir, msgr, xon, cols#80, it#8, lines#24, acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1, tbc=\E0, use=adm+sgr, #### Motorola # # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL # (Seth H Zirin) ex155|Motorola Exorterm 155, OTbs, am, bw, OTkn#5, OTug#1, cols#80, lines#24, cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET, el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, #### Omron # # This company is still around in 1995, manufacturing point-of-sale systems. omron|Omron 8025AG, OTbs, am, da, db, cols#80, lines#24, bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, #### Ramtek # # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they # were competition for things like the Tektronics 4025. # # Ramtek 6221 from BRL, probably by Doug Gwyn # The following SET-UP modes are assumed for normal operation: # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON # NEWLINE_OFF 80_COLUMNS # Other SET-UP modes may be set for operator convenience or communication # requirements; I recommend # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON # Hardware tabs are assumed to be every 8 columns; they can be set up by the # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). # Note that the Control-E key is useless on this brain-damaged terminal. No # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! rt6221|Ramtek 6221 80x24, OTbs, OTpt, msgr, xon, OTkn#4, cols#80, it#8, lines#24, vt#3, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. rt6221-w|Ramtek 6221 160x48, cols#160, lines#48, ll=\E[48;1H, use=rt6221, #### RCA # # RCA VP3301 or VP3501 rca|rca vp3301/vp3501, OTbs, cols#40, lines#24, clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, #### Selanar # # Selanar HiREZ-100 from BRL, probably by Doug Gwyn # The following SET-UP modes are assumed for normal operation: # SET_DEFAULT_TABS 48_LINES 80_COLUMNS # ONLINE ANSI CURSOR_VISIBLE # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN # For use with graphics software, all graphics modes should be set to factory # default. Other SET-UP modes may be set for operator convenience or # communication requirements. No delays are specified; use "stty ixon -ixany" # to enable DC3/DC1 flow control! # I commented out the scrolling capabilities since they are too slow. hirez100|Selanar HiREZ-100, OTbs, OTpt, mir, msgr, xon, OTkn#4, cols#80, it#8, lines#48, vt#3, acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, hirez100-w|Selanar HiREZ-100 in 132-column mode, cols#132, use=hirez100, #### Signetics # # From University of Wisconsin vsc|Signetics Vsc Video driver by RMC, am, msgr, cols#80, it#8, lines#26, clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s, rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", #### Soroc # # Alan Frisbie writes: # # As you may recall, the Soroc logo consisted of their name, # with the letter "S" superimposed over an odd design. This # consisted of a circle with a slightly smaller 15 degree (approx.) # wedge with rounded corners inside it. The color was sort of # a metallic gold/yellow. # # If I had been more of a beer drinker it might have been obvious # to me, but it took a clue from their service department to make # me exclaim, "Of course!" The circular object was the top of # a beer can (the old removable pop-top style) and "Soroc" was an # anagram for "Coors". # # I can just imagine the founders of the company sitting around # one evening, tossing back a few and trying to decide what to # call their new company and what to use for a logo. # # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) soroc120|iq120|soroc|soroc iq120, clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, use=adm3a, soroc140|iq140|soroc iq140, OTbs, am, mir, cols#80, lines#24, bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J, kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A, #### Southwest Technical Products # # These guys made an early personal micro called the M6800. # The ct82 was probably its console terminal. # # (swtp: removed obsolete ":bc=^D:" -- esr) swtp|ct82|southwest technical products ct82, am, cols#82, lines#20, bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, home=^P, ich1=^\^X, il1=^\^Y, ind=^N, is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, ll=^C, ri=^O, rmso=^^^F, smso=^^^V, #### Synertek # # Bob Manson writes (28 Apr 1995): # # Synertek used to make ICs, various 6502-based single-board process # control and hobbyist computers, and assorted peripherals including a # series of small inexpensive terminals (I think they were one of the # first to have a "terminal-on-a-keyboard", where the terminal itself # was only slightly larger than the keyboard). # # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 # was a 40x24 terminal that could connect to a standard TV through a # video modulator. The KTM-2/80 was the 80-column version (the 2/40 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). # I have a KTM-2/80 still in working order. The KTM-2s had fully # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program # ROM and 2 ROMs as character generators. They were incredibly simple, # and I've never had any problems with mine (witness the fact that mine # was made in 1981 and is still working great... I've blown the video # output transistor a couple of times, but it's a 2N2222 :-) # # The KTM-3 (which is what is listed in the terminfo file) was their # attempt at putting a KTM-2 in a box (and some models came with a # CRT). It wasn't much different from the KTM-2 hardware-wise, but the # control and escape sequences are very different. The KTM-3 was always # real broken, at least according to the folks I've talked to about it. # # The padding in the entry is probably off--these terminals were very # slow (it takes like 100ms for the KTM-2 to clear the screen...) And # anyone with any sanity replaced the ROMs with something that provided # a reasonable subset of VT100 functionality, since the usual ROMs were # obviously very primitive... oh, you could get an upgraded ROM from # Synertek for some incredible amount of money, but what hacker with an # EPROM burner would do that? :) # # Sorry I don't have any contact info; I believe they were located in # Sunnyvale, and I'm fairly sure they are still manufacturing ICs # (they've gone to ASICs and FPGAs), but I doubt they're in the computer # business these days. # # Tested, seems to work fine with vi. synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal, am, cols#80, lines#24, clear=^Z, cub1=^H, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, #### Tab Office Products # # TAB Products Co. - Palo Alto, California # Electronic Office Products, # 1451 California Avenue 94304 # # I think they're out of business. # # The tab 132 uses xon/xoff, so no padding needed. # / have nothing to do with arrow keys. # sets 80 col mode, normal video, autowrap on (for ). # Seems to be no way to get rid of status line. # The manual for this puppy was dated June 1981. It claims to be VT52- # compatible but looks more vt100-like. tab132|tab|tab132-15|tab 132/15, da, db, OTdN@, cols#80, lines#24, lm#96, cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B, kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100, tab132-w|tab132 in wide mode, cols#132, is2=\E[?7h\E[?3h\E[?5l, use=tab132, tab132-rv|tab132 in reverse-video mode, is2=\E[?7h\E[?3l\E[?5h, use=tab132, tab132-w-rv|tab132 in reverse-video/wide mode, is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, #### Teleray # # Research Incorporated # 6425 Flying Cloud Drive # Eden Prairie, MN 55344 # Vox: (612)-941-3300 # # The Teleray terminals were all discontinued in 1992-93. RI still services # and repairs these beasts, but no longer manufactures them. The Teleray # people believe that all the types listed below are very rare now (1995). # There was a newer line of Telerays (Model 7, Model 20, Model 30, and # Model 100) that were ANSI-compatible. # # Note two things called "teleray". Reorder should move the common one # to the front if you have either. A dumb teleray with the cursor stuck # on the bottom and no obvious model number is probably a 3700. # t3700|dumb teleray 3700, OTbs, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J, t3800|teleray 3800 series, OTbs, cols#80, it#8, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, ll=\EY7\s, t1061|teleray|teleray 1061, OTbs, am, km, xhp, xt, cols#80, it#8, lines#24, xmc#1, bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF, ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>, is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH, tbc=\EG, t1061f|teleray 1061 with fast PROMs, dl1=\EM, il1=\EL, ip@, use=t1061, # "Teleray Arpa Special", officially designated as # "Teleray Arpa network model 10" with "Special feature 720". # This is the new (1981) fast microcode updating the older "arpa" proms # (which gave meta-key and programmable-fxn keys). 720 is much much faster, # converts the keypad to programmable function keys, and has other goodies. # Standout mode is still broken (magic cookie, etc) so is suppressed as no # programs handle such lossage properly. # Note: this is NOT the old termcap's "t1061f with fast proms." # From: J. Lepreau Tue Feb 1 06:39:37 1983, Univ of Utah # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr) t10|teleray 10 special, OTbs, km, xhp, xt, cols#80, it#8, lines#24, xmc#2, clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD, smul=\ERH, # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and # back/forth words. Put the function keys (f1-f10) where they can be # found, and turn off the other magic keys along the top row, except # for line/local. Do the magic appropriate to make the page shifts work. # Also toggle ^S/^Q for those of us who use Emacs. t16|teleray 16, am, da, db, mir, xhp, xt, cols#80, lines#24, bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L, ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, smso=\E[7m, smul=\E[4m, #### Texas Instruments (ti) # # The Silent 700 was so called because it was built around a quiet thermal # printer. It was portable, equipped with an acoustic coupler, and pretty # neat for its day. ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800, OTbs, hc, os, cols#80, bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J, # # Texas Instruments 916 VDT 7 bit control mode # ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL, da, db, in, msgr, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>, cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA, dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@, smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=vt220, # # Texas Instruments 916 VDT 8 bit control mode # ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL, kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~, kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~, kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916, # # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode # ti916-132|Texas Instruments 916 VDT vt220 132 column, cols#132, use=ti916, # # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode # ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column, cols#132, use=ti916-8, ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL, OTbs, am, xon, cols#80, it#8, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL, am, xon, cols#80, it#8, lines#24, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>, kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>, kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>, kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode, cols#132, use=ti924, ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode, cols#132, use=ti924-8, ti931|Texas Instruments 931 VDT, OTbs, am, xon, cols#80, lines#24, bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H, is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9, kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@, sgr0=\E4@, smso=\E4A, smul=\E4D, ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL, csr@, ind=\E[1S, ri=\E[1T, use=ti924, # (ti926-8: I corrected this from the broken SCO entry -- esr) ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL, csr@, ind=\2331S, ri=\2331T, use=ti924-8, ti_ansi|basic entry for ti928, am, bce, eo, xenl, xon, colors#8, cols#80, it#8, lines#25, pairs#64, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, # # 928 VDT 7 bit control mode # ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL, kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi, # # 928 VDT 8 bit control mode # ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL, kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~, kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~, kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, kpp=\233T, kprt=\23335~, use=ti_ansi, #### Zentec (zen) # # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally # had just =\EG6 which I think means standout was supposed to be # dim-reverse using ADM12-style attributes. ADM12 / and # might work-- esr) zen30|z30|zentec 30, OTbs, am, mir, ul, cols#80, lines#24, bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6, smul@, use=adm+sgr, # (zen50: this had extension capabilities # :BS=^U:CL=^V:CR=^B: # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, # which were also in the original entry -- esr) # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) zen50|z50|zentec zephyr, OTbs, am, cols#80, lines#24, xmc#1, clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE, invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmul@, smul@, use=adm+sgr, # CCI 4574 (Office Power) from Will Martin via BRL cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, OTbs, am, bw, cols#80, lines#24, blink=\EM", clear=\EH\EJ, cnorm=\EP, csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R, rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s, smso=\EM$, smul=\EM0, ######## OBSOLETE UNIX CONSOLES # #### Apollo consoles # # Apollo got bought by Hewlett-Packard. The Apollo workstations are # labeled HP700s now. # # From: Gary Darland apollo|apollo console, OTbs, am, mir, cols#88, lines#53, clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL, ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED, rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ, smso=\ES, smul=\EU, vpa=\EO+\s, # We don't know whether or not the apollo guys replicated DEC's firmware bug # in the VT132 that reversed /. To be on the safe side, disable # both these capabilities. apollo_15P|apollo 15 inch display, rmir@, smir@, use=vt132, apollo_19L|apollo 19 inch display, rmir@, smir@, use=vt132, apollo_color|apollo color display, rmir@, smir@, use=vt132, #### Convergent Technology # # Burroughs bought Convergent shortly before it merged with Univac. # CTOS is (I believe) dead. Probably the aws is too (this entry dates # from 1991 or earlier). # # Convergent AWS workstation from Gould/SEL UTX/32 via BRL # (aws: removed unknown :dn=^K: -- esr) aws|Convergent Technologies AWS workstation under UTX and Xenix, am, OTug#0, cols#80, lines#28, xmc#0, OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=, clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, vpa=\EV%p1%c, awsc|Convergent Technologies AWS workstation under CTOS, am, OTug#0, cols#80, lines#24, xmc#0, OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, smul=\EAC, #### DEC consoles # # The MicroVax console. Tim Theisen writes: # The digital uVax II's had a graphic display called a qdss. It was # supposed to be a high performance graphic accelerator, but it was # late to market and barely appeared before faster dumb frame buffers # appeared. I have only used this display while running X11. However, # during bootup, it was in text mode, and probably had a terminal emulator # within it. And that is what your termcap entry is for. In graphics # mode the screen size is 1024x864 pixels. qdss|qdcons|qdss glass tty, OTbs, am, cols#128, lines#57, clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L, cup=\E=%p1%c%p2%c, cuu1=^K, #### Fortune Systems consoles # # Fortune made a line of 68K-based UNIX boxes that were pretty nifty # in their day; I (esr) used one myself for a year or so around 1984. # They had no graphics, though, and couldn't compete against Suns and # the like. R.I.P. # # From: Robert Nathanson via tut Wed Oct 5, 1983 # (This had extension capabilities # :rv=\EH:re=\EI:rg=0:GG=0:\ # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) # to force both magic cookie glitches off. Once upon a time, I # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are # function keys; thus the "Al" value for HM was certainly an error. I renamed # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) fos|fortune|Fortune system, OTbs, am, bw, cols#80, lines#25, acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E], clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>, cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>, cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H, kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH, rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP, #### Masscomp consoles # # Masscomp has gone out of business. Their product line was purchased by # comany in Georgia (US) called "XS International", parts and service may # still be available through them. # # (masscomp: ":MT:" changed to ":km:"; -- esr) masscomp|masscomp workstation console, OTbs, km, mir, cols#80, it#8, lines#24, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, masscomp1|masscomp large screen version 1, cols#104, lines#36, use=masscomp, masscomp2|masscomp large screen version 2, cols#64, lines#21, use=masscomp, ######## OTHER OBSOLETE TYPES # # These terminals are *long* dead -- these entries are retained for # historical interest only. # #### Obsolete non-ANSI software emulations # # CTRM terminal emulator # 1. underlining is not allowed with colors: first, is is simulated by # black on white, second, it disables background color manipulations. # 2. BLINKING, REVERSE and BOLD are allowed with colors, # so we have to save their status in the static registers A, B and H # respectively, to be able to restore them when color changes # (because any color change turns off ALL attributes) # 3. and sequences alternate modes, # rather than simply entering them. Thus we have to check the # static register B and H to determine the status, before sending the # escape sequence. # 4. now must set the status of all 3 register (A,B,H) to zero # and then reset colors # 5. implementation of the protect mode would badly penalize the performance. # we would have to use \E&bn sequence to turn off colors (as well as all # other attributes), and keep the status of protect mode in yet another # static variable. If someone really needs this mode, they would have to # create another terminfo entry. # 6. original color-pair is white on black. # store the information about colors into static registers # 7. set foreground color. it performs the following steps. # 1) turn off all attributes # 2) turn on the background and video attributes that have been turned # on before (this information is stored in static registers X,Y,Z,A,B,H,D). # 3) turn on foreground attributes # 4) store information about foreground into U,V,W static registers # 8. turn on background: similar to turn on foreground above ctrm|C terminal emulator, am, bce, xon, colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0, pairs#63, pb#19200, vt#6, bel=^G, blink=\E&dA%{1}%PA, bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU, rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA, setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX, setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU, sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;, sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB, smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, # gs6300 - can't use blue foreground, it clashes with underline; # it's simulated with cyan # Bug: The capability probably resets attributes. # (gs6300: commented out (no ) --esr) gs6300|emots|AT&T PC6300 with EMOTS terminal emulator, am, bce, msgr, xon, colors#8, cols#80, it#8, lines#24, pairs#63, acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m, ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm, setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m, sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, # From: 29 Oct 85 05:40:18 GMT # MS-Kermit with Heath-19 emulation mode enabled # (h19k: changed ":pt@:" to ":it@" h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin), am@, da, db, xt, it@, ht@, use=h19-u, # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy # Software (formerly Peripherals Computers & Supplies, Inc) of # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can # also be reached at support@synergy.com. versaterm|versaterm vt100 emulator for the macintosh, am, xenl, cols#80, it#8, lines#24, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>, il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>, sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>, smul=\E[4m$<2/>, # From: Rick Thomas # (xtalk: I added / based on the init string. xtalk|IBM PC with xtalk communication program (versions up to 3.4), am, mir, msgr, xon, cols#80, it#8, lines#24, vt#3, xmc#1, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m\s, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, tbc=\E[3g, use=vt100+fnkeys, # The official PC terminal emulator program of the AT&T Product Centers. # Note - insert mode commented out - doesn't seem to work on AT&T PC. simterm|attpc running simterm, am, cols#80, lines#24, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE, rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB, #### Daisy wheel printers # # This section collects Diablo, DTC, Xerox, Qume, and other daisy # wheel terminals. These are now largely obsolete. # # (diablo1620: removed , no such file -- esr) diablo1620|diablo1720|diablo450|ipsi|diablo 1620, hc, os, cols#132, it#8, cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c, ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2, diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin, cols#124, is2=\r \E9, use=diablo1620, # (diablo1640: removed , no such file -- esr) diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640, bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, # (diablo1640-lm: removed , no such # file -- esr) diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin, cols#124, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer, use=diablo1640-lm, # DTC 382 with VDU. Has no so we fake it with . Standout # works but won't go away without dynamite . # The terminal has tabs, but I'm getting tired of fighting the braindamage. # If no tab is set or the terminal's in a bad mood, it glitches the screen # around all of memory. Note that return puts a blank ("a return character") # in the space the cursor was at, so we use ^P return (and thus ^P newline for # newline). Note also that if you turn off :pt: and let Unix expand tabs, # curses won't work (some old BSD versions) because it doesn't clear this bit, # and cursor addressing sends a tab for row/column 9. What a losing terminal! # I have been unable to get tabs set in all 96 lines - it always leaves at # least one line with no tabs in it, and once you tab through that line, # it completely weirds out. # (dtc382: change to -- it just does a clear --esr) dtc382|DTC 382, am, da, db, xhp, cols#80, lines#24, lm#96, bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H, cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB, dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U, home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi, rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P, dtc300s|DTC 300s, hc, os, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, gsi|mystery gsi terminal, hc, os, cols#132, bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH, ind=^J, aj830|aj832|aj|anderson jacobson, hc, os, bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, ind=^J, # From: Chris Torek Thu, 7 Nov 85 18:21:58 EST aj510|Anderson-Jacobson model 510, am, mir, cols#80, lines#24, clear=^L, cub1=^H, cuf1=\EX, cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY, dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=, il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ, kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J, rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I, smul=\E"U, # From: Thu Aug 20 09:09:18 1981 # This is incomplete, but it's a start. nec5520|nec|spinwriter|nec 5520, hc, os, cols#132, it#8, bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L, hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J, kbs=^H, tbc=\E3, qume5|qume|Qume Sprint 5, hc, os, cols#80, it#8, bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, # I suspect the xerox 1720 is the same as the diablo 1620. xerox1720|x1720|x1750|xerox 1720, hc, os, cols#132, it#8, bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J, tbc=\E2, #### Miscellaneous obsolete terminals, manufacturers unknown # # If you have any information about these (like, a manufacturer's name, # and a date on the serial-number plate) please send it! cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, OTbs, am, cols#73, lines#36, clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, OTbs, am, cols#85, lines#39, clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7, kf4=\E8, rmso=\Em^C, smso=\Em^L, cops10|cops|cops-10|cops 10, am, bw, cols#80, lines#24, bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^Y, # (d132: removed duplicate :ic=\E5:, # merged in capabilities from a BRL entry -- esr) d132|datagraphix|datagraphix 132a, da, db, in, cols#80, lines#30, bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J, cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew, # The d800 was an early portable terminal from c.1984-85 that looked a lot # like the original Compaq `lunchbox' portable (but no handle). It had a vt220 # mode (which is what this entry looks like) and several other lesser-known # emulations. d800|Direct 800/A, OTbs, am, da, db, msgr, xhp, cols#80, it#8, lines#24, acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=\E[1m, smso=\E[7m, smul=\E[4m, digilog|digilog 333, OTbs, cols#80, lines#16, bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X, home=^N, ind=^J, # The DWK was a terminal manufactured in the Soviet Union c.1986 dwk|dwk-vt|dwk terminal, am, cols#80, it#8, lines#24, acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5, kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh, kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX, sgr0=\EX, smacs=\EF, smso=\ET, env230|envision230|envision 230 graphics terminal, xenl@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, use=vt100, # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic # coupler attached, the whole rig fitting in a suitcase and more or less # portable. Hot stuff for c.1977 :-) -- esr ep48|ep4080|execuport 4080, OTbs, am, os, cols#80, bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, ep40|ep4000|execuport 4000, cols#136, use=ep4080, # Adam Thompson tells us: # Informer series - these are all portable units, resembling older # automatic bread-baking machines. The terminal looks like a `clamshell' # design, but isn't. The structure is similar to the Direct terminals, # but only half the width. The entire unit is only about 10" wide. # It features an 8" screen (6" or 7" if you have color!), and an 9"x6" # keyboard. All the keys are crammed together, much like some laptop # PCs today, but perhaps less well organized...all these units have a # bewildering array of plugs on the back, including a built-in modem. # The 305 was a color version of the 304; the 306 and 307 were mono and # color terminals built for IBM bisync protocols. # From: Paul Leondis ifmr|Informer D304, OTbs, am, cols#80, lines#24, clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC, cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\, ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK, smso=\EJ, # Entry largely based on wy60 and has the features of wy60ak. opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys, am, bw, hs, km, mir, msgr, ul, xon, cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80, acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K, dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r, ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>, hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J, ip=$<3>, is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>, pfloc=\EZ2%p1%{63}%+%c%p2%s\177, pfx=\EZ1%p1%{63}%+%c%p2%s\177, pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>, rs3=\EwG\Ee($<150>, sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/, smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177, smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(, uc=\EG8\EG0, use=adm+sgr, teletec|Teletec Datascreen, OTbs, am, cols#80, lines#24, bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K, home=^^, ind=^J, # From: Mark Dornfeld # This description is for the LANPAR Technologies VISION 3220 # terminal from 1984/85. The function key definitions k0-k5 represent the # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. # # Kenneth Randell writes on 31 Dec 1998: # I had a couple of scopes (3221) like this once where I used to work, around # the 1987 time frame if memory serves me correctly. These scopes were made # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals # (3221) cost about $1500 each, and one was always broken -- had to be sent # back to the shop for repairs. # The only real advantage these scopes had over the VT-240's were: # 1) They were faster in the Regis display, or at least the ones I did # 2) They had a handy debugging feature where you could split-screen the # scope, the graphics would appear on the top, and the REGIS commands would # appear on the bottom. I don't remember the VT-240s being able to do that. # I would swear that LANPAR Technologies was in MA someplace, but since I # don't work at the same place anymore, and those terminals and manuals were # long since junked, I cannot be any more sure than that. # # (v3220: removed obsolete ":kn#10:", # I added / based on the init string -- esr) v3220|LANPAR Vision II model 3220/3221/3222, OTbs, am, mir, xenl, cols#80, it#8, lines#24, clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, ######## ICH/ICH1 VERSUS RMIR/SMIR # # Some non-curses applications get confused if both ich/ich1 and rmir/smir # are present; the symptom is doubled characters in an update using insert. # These applications are technically correct; in both 4.3BSD termcap and # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir # unless the terminal needs both. To my knowledge, no terminal still in this # file requires both other than the very obsolete dm2500. # # For ncurses-based applications this is not a problem, as ncurses uses # one or the other as appropriate but never mixes the two. Therefore we # have not corrected entries like `linux' and `xterm' that specify both. # If you see doubled characters from these, use the linux-nic and xterm-nic # entries that suppress ich/ich1. And upgrade to ncurses! # ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS # # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and # ECMA-48 standards are said to be almost identical, but are not the same # as X3.64 (though for practical purposes they are close supersets of it). # # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for # Coded Character Sets"), include your snail-mail address, and you should # receive the document in due course. Don't expect an email acknowledgement. # # Related standards include "X3.4-1977: American National Standard Code for # Information Interchange" (the ASCII standard) and "X3.41.1974: # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of # American National Standard for Information Interchange." I believe (but # am not certain) that these are effectively identical to ECMA-6 and ECMA-35 # respectively. # #### VT100/ANSI/ECMA-48 # # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals # and ECMA-48 Control Functions for Coded Character Sets. # # Much of the content of this comment is adapted from a table prepared by # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, # discussion of some terminfo-related issues, and updates to capture ECMA-48 # have been added. Control functions described in ECMA-48 only are tagged # with * after their names. # # The table is a complete list of the defined ANSI X3.64/ECMA-48 control # sequences. In the main table, \E stands for an escape (\033) character, # SPC for space. Pn stands for a single numeric parameter to be inserted # in decimal ASCII. Ps stands for a list of such parameters separated by # semicolons. Parameter meanings for most parametrized sequences are # decribed in the notes. # # Sequence Sequence Parameter or # Mnemonic Name Sequence Value Mode terminfo # ----------------------------------------------------------------------------- # APC Applicatn Program Command \E _ - Delim - # BEL Bell * ^G - - bel # BPH Break Permitted Here * \E B - * - # BS Backpace * ^H - EF - # CAN Cancel * ^X - - - (A) # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt # CCH Cancel Previous Character \E T - - - # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B) # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C) # CMD Coding Method Delimiter * \E # CNL Cursor Next Line \E [ Pn E 1 eF nel (D) # CPL Cursor Preceding Line \E [ Pn F 1 eF - # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E) # CSI Control Sequence Intro \E [ - Intro - # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F) # CUB Cursor Backward \E [ Pn D 1 eF cub # CUD Cursor Down \E [ Pn B 1 eF cud # CUF Cursor Forward \E [ Pn C 1 eF cuf # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G) # CUU Cursor Up \E [ Pn A 1 eF cuu # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H) # DA Device Attributes \E [ Pn c 0 - - # DAQ Define Area Qualification \E [ Ps o 0 - - # DCH Delete Character \E [ Pn P 1 eF dch # DCS Device Control String \E P - Delim - # DL Delete Line \E [ Pn M 1 eF dl # DLE Data Link Escape * ^P - - - # DMI Disable Manual Input \E \ - Fs - # DSR Device Status Report \E [ Ps n 0 - - (I) # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC - # EA Erase in Area \E [ Ps O 0 eF - (J) # ECH Erase Character \E [ Pn X 1 eF ech # ED Erase in Display \E [ Ps J 0 eF ed (J) # EF Erase in Field \E [ Ps N 0 eF - # EL Erase in Line \E [ Ps K 0 eF el (J) # EM End of Medium * ^Y - - - # EMI Enable Manual Input \E b Fs - # ENQ Enquire ^E - - - # EOT End Of Transmission ^D - * - # EPA End of Protected Area \E W - - - (K) # ESA End of Selected Area \E G - - - # ESC Escape ^[ - - - # ETB End Transmission Block ^W - - - # ETX End of Text ^C - - - # FF Form Feed ^L - - - # FNK Function Key * \E [ Pn SPC W - - - # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - - # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L) # GSS Graphic Size Selection \E [ Pn SPC C none FE - # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B) # HPB Char Position Backward \E [ j 1 FE - # HPR Horz Position Relative \E [ Pn a 1 FE - (M) # HT Horizontal Tab * ^I - FE - (N) # HTJ Horz Tab w/Justification \E I - FE - # HTS Horizontal Tab Set \E H - FE hts # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G) # ICH Insert Character \E [ Pn @ 1 eF ich # IDCS ID Device Control String \E [ SPC O - * - # IGS ID Graphic Subrepertoire \E [ SPC M - * - # IL Insert Line \E [ Pn L 1 eF il # IND Index \E D - FE - # INT Interrupt \E a - Fs - # JFY Justify \E [ Ps SPC F 0 FE - # IS1 Info Separator #1 * ^_ - * - # IS2 Info Separator #1 * ^^ - * - # IS3 Info Separator #1 * ^] - * - # IS4 Info Separator #1 * ^\ - * - # LF Line Feed ^J - - - # LS1R Locking Shift Right 1 * \E ~ - - - # LS2 Locking Shift 2 * \E n - - - # LS2R Locking Shift Right 2 * \E } - - - # LS3 Locking Shift 3 * \E o - - - # LS3R Locking Shift Right 3 * \E | - - - # MC Media Copy \E [ Ps i 0 - - (S) # MW Message Waiting \E U - - - # NAK Negative Acknowledge * ^U - * - # NBH No Break Here * \E C - - - # NEL Next Line \E E - FE nel (D) # NP Next Page \E [ Pn U 1 eF - # NUL Null * ^@ - - - # OSC Operating System Command \E ] - Delim - # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - - # PFS Page Format Selection * \E Pn SPC J 0 - - # PLD Partial Line Down \E K - FE - (T) # PLU Partial Line Up \E L - FE - (U) # PM Privacy Message \E ^ - Delim - # PP Preceding Page \E [ Pn V 1 eF - # PPA Page Position Absolute * \E [ Pn SPC P 1 FE - # PPB Page Position Backward * \E [ Pn SPC R 1 FE - # PPR Page Position Forward * \E [ Pn SPC Q 1 FE - # PTX Parallel Texts * \E [ \ - - - # PU1 Private Use 1 \E Q - - - # PU2 Private Use 2 \E R - - - # QUAD Typographic Quadding \E [ Ps SPC H 0 FE - # REP Repeat Char or Control \E [ Pn b 1 - rep # RI Reverse Index \E M - FE - (V) # RIS Reset to Initial State \E c - Fs - # RM Reset Mode * \E [ Ps l - - - (W) # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - - # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X) # SCI Single-Char Introducer \E Z - - - # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - - # SCS Set Char. Spacing * \E [ Pn SPC g - - - # SD Scroll Down \E [ Pn T 1 eF rin # SDS Start Directed String * \E [ Pn ] 1 - - # SEE Select Editing Extent \E [ Ps Q 0 - - (Y) # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - - # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O) # SHS Select Char. Spacing * \E [ Ps SPC K 0 - - # SI Shift In ^O - - - (P) # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - - # SL Scroll Left \E [ Pn SPC @ 1 eF - # SLH Set Line Home * \E [ Pn SPC U - - - # SLL Set Line Limit * \E [ Pn SPC V - - - # SLS Set Line Spacing * \E [ Pn SPC h - - - # SM Select Mode \E [ Ps h none - - (W) # SO Shift Out ^N - - - (Q) # SOH Start Of Heading * ^A - - - # SOS Start of String * \E X - - - # SPA Start of Protected Area \E V - - - (Z) # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - - # SPH Set Page Home * \E [ Ps SPC G - - - # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - # SPL Set Page Limit * \E [ Ps SPC j - - - # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - - # SR Scroll Right \E [ Pn SPC A 1 eF - # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - - # SRS Start Reversed String * \E [ Ps [ 0 - - # SSA Start of Selected Area \E F - - - # SSU Select Size Unit * \E [ Pn SPC I 0 - - # SSW Set Space Width * \E [ Pn SPC [ none - - # SS2 Single Shift 2 (G2 set) \E N - Intro - # SS3 Single Shift 3 (G3 set) \E O - Intro - # ST String Terminator \E \ - Delim - # STAB Selective Tabulation * \E [ Pn SPC ^ - - - # STS Set Transmit State \E S - - - # STX Start pf Text * ^B - - - # SU Scroll Up \E [ Pn S 1 eF indn # SUB Substitute * ^Z - - - # SVS Select Line Spacing * \E [ Pn SPC \ 1 - - # SYN Synchronous Idle * ^F - - - # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - - # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - - # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - - # TBC Tab Clear \E [ Ps g 0 FE tbc # TCC Tabul. Centered on Char * \E [ Pn SPC c - - - # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE - # TSS Thin Space Specification \E [ Pn SC E none FE - # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa # VPB Line Position Backward * \E [ Pn k 1 FE - # VPR Vert. Position Relative \E [ Pn e 1 FE - (R) # VT Vertical Tabulation * ^K - FE - # VTS Vertical Tabulation Set \E J - FE - # # --------------------------------------------------------------------------- # # Notes: # # Some control characters are listed in the ECMA-48 standard without # being assigned functions relevant to terminal control there (they # referred to other standards such as ISO 1745 or ECMA-35). They are listed # here anyway for completeness. # # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation. # # (B) There seems to be some confusion abroad between CHA and HPA. Most # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but # preserved the CHA abbreviation. # # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I. # Occasionally (as on, for example, certain HP terminals) this has the HTJ # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the # CHT abbreviation. # # (D) terminfo (nel) is usually \r\n rather than ANSI \EE. # # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR # abbreviation. # # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear # char tab, 3 = clear line tab, 4 = clear all char tabs on current line, # 5 = clear all char tabs, 6 = clear all line tabs. # # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character # Position Absolute" but retains the HVP abbreviation. # # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT # abbreviation. # # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request # DSR, 6 = request CPR response. # # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end, # 1 = clear from beginning, 2 = clear. # # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. # # (L) The GSM parameters are vertical and horizontal parameters to scale by. # # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals # use CUF for this function and ignore HPR. ECMA-48 calls this "Character # Position Relative" but retains the HPR abbreviation. # # (N) ECMA-48 calls this "Character Tabulation" but retains the HT # abbreviation. # # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold, # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink, # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion), # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur, # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4, # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg, # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 = # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved, # 61-65 = variable highlights for ideograms. # # (P) SI is also called LSO, Locking Shift Zero. # # (Q) SI is also called LS1, Locking Shift One. # # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals # use CUD for this function and ignore VPR. ECMA calls it `Line Position # Absolute' but retains the VPA abbreviation. # # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer # from secondary aux device, 4 = stop relay to primary aux device, 5 = # start relay to primary aux device, 6 = stop relay to secondary aux device, # 7 = start relay to secondary aux device. # # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD # abbreviation. # # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU # abbreviation. # # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. # # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM), # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM), # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM), # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 = # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed # from ECMA-48's 5th edition but are listed here for reference. # # (X) Select Alternate Presentation Variants is used only for non-Latin # alphabets. # # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM). # # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA # abbreviation. # # --------------------------------------------------------------------------- # # Abbreviations: # # Intro an Introducer of some kind of defined sequence; the normal 7-bit # X3.64 Control Sequence Introducer is the two characters "Escape [" # # Delim a Delimiter # # x/y identifies a character by position in the ASCII table (column/row) # # eF editor function (see explanation) # # FE format effector (see explanation) # # F is a Final character in # an Escape sequence (F from 3/0 to 7/14 in the ASCII table) # a control sequence (F from 4/0 to 7/14) # # Gs is a graphic character appearing in strings (Gs ranges from # 2/0 to 7/14) in the ASCII table # # Ce is a control represented as a single bit combination in the C1 set # of controls in an 8-bit character set # # C0 the familiar set of 7-bit ASCII control characters # # C1 roughly, the set of control chars available only in 8-bit systems. # This is too complicated to explain fully here, so read Jim Fleming's # article in the February 1983 BYTE, especially pages 214 through 224. # # Fe is a Final character of a 2-character Escape sequence that has an # equivalent representation in an 8-bit environment as a Ce-type # (Fe ranges from 4/0 to 5/15) # # Fs is a Final character of a 2-character Escape sequence that is # standardized internationally with identical representation in 7-bit # and 8-bit environments and is independent of the currently # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) # # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the # ASCII table # # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII # table # # Pn is a numeric parameter in a control sequence, a string of zero or # more characters ranging from 3/0 to 3/9 in the ASCII table # # Ps is a variable number of selective parameters in a control sequence # with each selective parameter separated from the other by the code # 3/11 (which usually represents a semicolon); Ps ranges from # 3/0 to 3/9 and includes 3/11 # # * Not relevant to terminal control, listed for completeness only. # # Format Effectors versus Editor Functions # # A format effector specifies how following output is to be displayed. # An editor function allows you to modify the display. Informally # format effectors may be destructive; format effectors should not be. # # For instance, a format effector that moves the "active position" (the # cursor or equivalent) one space to the left would be useful when you want to # create an overstrike, a compound character made of two standard characters # overlaid. Control-H, the Backspace character, is actually supposed to be a # format effector, so you can do this. But many systems use it in a # nonstandard fashion, as an editor function, deleting the character to the # left of the cursor and moving the cursor left. When Control-H is assumed to # be an editor function, you cannot predict whether its use will create an # overstrike unless you also know whether the output device is in an "insert # mode" or an "overwrite mode". When Control-H is used as a format effector, # its effect can always be predicted. The familiar characters carriage # return, linefeed, formfeed, etc., are defined as format effectors. # # NOTES ON THE DEC VT100 IMPLEMENTATION # # Control sequences implemented in the VT100 are as follows: # # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, # LNM, NEL, RI, RIS, RM, SGR, SM, TBC # # plus several private DEC commands. # # Erasing parts of the display (EL and ED) in the VT100 is performed thus: # # Erase from cursor to end of line Esc [ 0 K or Esc [ K # Erase from beginning of line to cursor Esc [ 1 K # Erase line containing cursor Esc [ 2 K # Erase from cursor to end of screen Esc [ 0 J or Esc [ J # Erase from beginning of screen to cursor Esc [ 1 J # Erase entire screen Esc [ 2 J # # Some brain-damaged terminal/emulators respond to Esc [ J as if it were # Esc [ 2 J, but this is wrong; the default is 0. # # The VT100 responds to receiving the DA (Device Attributes) control # # Esc [ c (or Esc [ 0 c) # # by transmitting the sequence # # Esc [ ? l ; Ps c # # where Ps is a character that describes installed options. # # The VT100's cursor location can be read with the DSR (Device Status # Report) control # # Esc [ 6 n # # The VT100 reports by transmitting the CPR sequence # # Esc [ Pl ; Pc R # # where Pl is the line number and Pc is the column number (in decimal). # # The specification for the DEC VT100 is document EK-VT100-UG-003. #### ANSI.SYS # # Here is a description of the color and attribute controls supported in the # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI # terminal emulators for Intel boxes obey these. They are a proper subset # of the ECMA-48 escapes. # # 0 all attributes off # 1 foreground bright # 4 underscore on # 5 blink on/background bright (not reliable with brown) # 7 reverse-video # 8 set blank (non-display) # 10 set primary font # 11 set first alternate font (on PCs, display ROM characters 1-31) # 12 set second alternate font (on PCs, display IBM high-half chars) # # Color attribute sets # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white # Bright black becomes gray. Bright brown becomes yellow, # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard. # # * If the 5 attribute is on and you set a background color (40-47) it is # supposed to enable bright background. # # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing # when you try to set a "bright brown" (yellow) background with attribute # 5 (you get a blinking yellow foreground instead). A few displays # (including the System V console) support an attribute 6 that undoes this # braindamage (this is required by iBCS2). # # * Some older versions of ANSI.SYS have a bug that causes thems to require # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48 # compatible.) #### Intel Binary Compatibility Standard # # For comparison, here are the capabilities implied by the Intel Binary # Compatibility Standard for UNIX systems (Intel order number 468366-001). # These recommendations are optional. IBCS2 allows the leading escape to # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities # (as described in figure 9-3 of the standard). Those expressed in the ibcs2 # terminfo entry are followed with the corresponding capability in parens: # # CSI k disable (n=0) or enable (n=1) keyclick # CSI 2h lock keyboard # CSI 2i send screen as input # CSI 2l unlock keyboard # CSI 6m enable background color intensity # CSI <0-2>c reserved # CSI <0-59>m select graphic rendition # CSI ;H (cup) cursor to line n and column m # CSI ;f cursor to line n and column m # CSI @ (ich) insert characters # CSI A (cuu) cursor up n lines # CSI B (cud) cursor down n lines # CSI C (cuu) cursor right n characters # CSI D (cud) cursor left n characters # CSI E cursor down n lines and in first column # CSI F cursor up n lines and in first column # CSI G (hpa) position cursor at column n-1 # CSI J (ed) erase in display # CSI K (el) erase in line # CSI L (il) insert line(s) # CSI P (dch) delete characters # CSI S (indn) scroll up n lines # CSI T (rin) scroll down n lines # CSI X (ech) erase characters # CSI Z (cbt) back up n tab stops # CSI ` cursor to column n on line # CSI a (cuu) cursor right n characters # CSI d (vpa) cursor to line n # CSI e cursor down n lines and in first column # CSI g (cbt) clear all tabs # CSI z make virtual terminal n active # CSI ?7h (smam) turn automargin on # CSI ?7l (rmam) turn automargin off # CSI s save cursor position # CSI u restore cursor position to saved value # CSI =A set overscan color # CSI =F set normal foreground color # CSI =G set normal background color # CSI =H set reverse foreground color # CSI =I set reverse foreground color # CSI =J set graphic foreground color # CSI =K set graphic foreground color # CSI =g (dispc) display n from alternate graphics character set # CSI =

;B set bell parameters # CSI =;C set cursor parameters # CSI =D enable/disable intensity of background color # CSI =E set/clear blink vs. bold background # CSI 7 (sc) (sc) save cursor position # CSI 8 (rc) (rc) restore cursor position to saved value # CSI H (hts) (hts) set tab stop # CSI Q define function key string # (string must begin and end with delimiter char) # CSI c (clear) clear screen # # The lack of any specification for attributes in SGR (among other things) # makes this a wretchedly weak standard. The table above is literally # everything iBSC2 has to say about terminal escape sequences; there is # no further discussion of their meaning or how to set the parameters # in these sequences at all. # ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE # # The historical termcap file entries were written primarily in 4.4BSD termcap. # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, # with the extension names chosen for compatibility with the termcap names # assigned in System V terminfo. There are some variant extension sets out # there. We try to describe them here. # # XENIX extensions: # # The XENIX extensions include a set of function-key capabilities as follows: # # code XENIX variable name terminfo name name clashes? # ---- ------------------- ------------- ----------------------- # CL key_char_left # CR key_char_right # CW key_change_window create_window # EN key_end kend # HM key_home khome # HP ?? # LD key_delete_line kdl1 # LF key_linefeed label_off # NU key_next_unlocked_cell # PD key_page_down knp # PL ?? # PN start_print mc5 # PR ?? # PS stop_print mc4 # PU key_page_up kpp pulse # RC key_recalc remove_clock # RF key_toggle_ref req_for_input # RT key_return kent # UP key_up_arrow kcuu1 parm_up_cursor # WL key_word_left # WR key_word_right # # The XENIX extensions also include the following character-set and highlight # capabilities: # # XENIX terminfo function # ----- -------- ------------------------------ # GS smacs start alternate character set # GE rmacs end alternate character set # GG :as:/:ae: glitch (analogous to :sg:/:ug:) # bo blink begin blink (not used in /etc/termcap) # be end blink (not used in /etc/termcap) # bb blink glitch (not used in /etc/termcap) # it dim begin dim (not used in /etc/termcap) # ie end dim (not used in /etc/termcap) # ig dim glitch (not used in /etc/termcap) # # Finally, XENIX also used the following forms-drawing capabilities: # # single double type ASCII approximation # ------ ------ ------------- ------------------- # GV Gv vertical line | # GH Gv horizontal line - _ # G1 G5 top right corner _ | # G2 G6 top left corner | # G3 G7 bottom left corner |_ # G4 G8 bottom right corner _| # GD Gd down-tick character T # GL Gl left-tick character -| # GR Gr right-tick character |- # GC Gc middle intersection -|- # GU Gu up-tick character _|_ # # These were invented to take advantage of the IBM PC ROM character set. One # can compose an acsc string from the single-width characters as follows # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}" # When translating a termcap file, ncurses tic will do this automatically. # The double forms characters don't fit the SVr4 terminfo model. # # AT&T Extensions: # # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of # nonstandard capabilities. Its signature is the KM capability, used to name # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this # set. Comments in the original, and a little cross-checking with other AT&T # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make # cursor invisible), and CV=:ve: (make cursor normal). # # HP Extensions # # The HP library (as of mid-1995, their term.h file version 70.1) appears to # have the System V capabilities up to SVr1 level. After that, it supports # two nonstandard caps meml and memu corresponding to the old termcap :ml:, # :mu: capabilities. After that, it supports caps plab_norm, label_on, # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the # HP binary format incompatible with SVr4's. # # IBM Extensions # # There is a set of nonstandard terminfos used by IBM's AIX operating system. # The AIX terminfo library diverged from SVr1 terminfo, and replaces all # capabilities following prtr_non with the following special capabilties: # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab, # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr, # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml, # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents: # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be # renamed (to kcbt and kslt). The places in the box[12] capabilities # correspond to acsc chars, here is the mapping: # # box1[0] = ACS_ULCORNER # box1[1] = ACS_HLINE # box1[2] = ACS_URCORNER # box1[3] = ACS_VLINE # box1[4] = ACS_LRCORNER # box1[5] = ACS_LLCORNER # box1[6] = ACS_TTEE # box1[7] = ACS_RTEE # box1[8] = ACS_BTEE # box1[9] = ACS_LTEE # box1[10] = ACS_PLUS # # The box2 characters are the double-line versions of these forms graphics. # The AIX binary terminfo format is incompatible with SVr4's. # # Iris console extensions: # # HS is half-intensity start; HE is half-intensity end # CT is color terminal type (for Curses & rogue) # CP is color change escape sequence # CZ are color names (for Curses & rogue) # # The ncurses tic utility recognizes HS as an alias for mh . # # TC Extensions: # # There is a set of extended termcaps associated with something # called the "Terminal Control" or TC package created by MainStream Systems, # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses # CF for civis and CO for cvvis. Finally, they define a boolean :ct: # that flags color terminals. # ######## CHANGE HISTORY # # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were # maintained by Eric S. Raymond as part of the ncurses project. # # This file contains all the capability information present in John Kunze's # last version of the termcap master file, except as noted in the change # comments at end of file. Some information about very ancient obsolete # capabilities has been moved to comments. Some all-numeric names of older # terminals have been retired. # # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer # used by BSD curses. # # The 9.1.0 version of this file was translated from my lightly-edited copy of # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for # the purpose. Unless the ncurses tic implementation and the Lisp code were # making perfectly synchronized mistakes which I then failed to catch by # eyeball, the translation was correct and perfectly information-preserving. # # Major version number bumps correspond to major version changes in ncurses. # # Here is a log of the changes since then: # # 9.1.0 (Wed Feb 1 04:50:32 EST 1995): # * First terminfo master translated from 8.3. # 9.2.0 (Wed Feb 1 12:21:45 EST 1995): # * Replaced Wyse entries with updated entries supplied by vendor. # # 9.3.0 (Mon Feb 6 19:14:40 EST 1995): # * Added contact & status info from G. Clark Brown . # 9.3.1 (Tue Feb 7 12:00:24 EST 1995): # * Better XENIX keycap translation. Describe TC termcaps. # * Contact and history info supplied by Qume. # 9.3.2 (Sat Feb 11 23:40:02 EST 1995): # * Raided the Shuford FTP site for recent termcaps/terminfos. # * Added information on X3.64 and VT100 standard escape sequences. # 9.3.3 (Mon Feb 13 12:26:15 EST 1995): # * Added a correct X11R6 xterm entry. # * Fixed terminfo translations of padding. # 9.3.4 (Wed Feb 22 19:27:34 EST 1995): # * Added correct acsc/smacs/rmacs strings for vt100 and xterm. # * Added u6/u7/u8/u9 capabilities. # * Added PCVT entry. # 9.3.5 (Thu Feb 23 09:37:12 EST 1995): # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry # to use reverse-video standout so Emacs will look right. # * Added el1 capability to ansi. # * Added smacs/rmacs to ansi.sys. # # 9.4.0 (Sat Feb 25 16:43:25 EST 1995): # * New mt70 entry. # * Added COPYRIGHTS AND OTHER DELUSIONS. # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics # smartvid & smarterm, ampex 175 & 219 & 232, # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. # * Replaced the Perkin-Elmer entries with vendor's official ones. # * Restored the old minimal-ansi entry, luna needs it. # * Fixed some incorrect ip and proportional-padding translations. # 9.4.1 (Mon Feb 27 14:18:33 EST 1995): # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. # * Make the xterm entry 65 lines again; create xterm25 and xterm24 # to force a particular height. # * Added beehive4 and reorganized other Harris entries. # 9.4.2 (Thu Mar 9 01:45:44 EST 1995): # * Merged in DEC's official entries for its terminals. The only old # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). # * Replaced the translated BBN Bitgraph entries with purpose-built # ones from AT&T's SVr3. # * Replaced the AT&T entries with AT&T's official terminfos. # * Added teleray 16, vc415, cops10. # * Merged in many individual capabilities from SCO terminfo files. # 9.4.3 (Mon Mar 13 02:37:53 EST 1995): # * Typo fixes. # * Change linux entry so A_PROTECT enables IBM-PC ROM characters. # 9.4.4 (Mon Mar 27 12:32:35 EST 1995): # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, # simterm, citoh and variants. # * Replaced sol entry with sol1 and sol2. # * Replaced Qume QVT and Freedom-series entries with purpose-built # terminfo entries. # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek # and dg200 entries using caps from from SCO. # * Added the usual set of function-key mappings to ANSI entry. # * Corrected xterm's function-key capabilities. # 9.4.5 (Tue Mar 28 14:27:49 EST 1995): # * Fix in xterm entry, cub and cud are not reliable under X11R6. # 9.4.6 (Thu Mar 30 14:52:15 EST 1995): # * Fix in xterm entry, get the arrow keys right. # * Change some \0 escapes to \200. # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) # * Added apple (Videx card), adm1a, oadm31. # * Fixed malformed ampex csr. # * Fixed act4, cyb110; they had old-style prefix padding left in. # * Changed mandatory to advisory padding in many entries. # * Replaced HP entries up to hpsub with purpose-built ones. # * Blank rmir/smir/rmdc/smdc capabilities removed. # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995): # * Replaced the Ann Arbor entries with SCO's, the init strings are # more efficient (but the entries otherwise identical). # * Added dg211 from Shuford archive. # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, # adm42-nl, pc52, gs6300, xerox820, uts30. # * Pull SCO's padding into vi200 entry. # * Improved capabilities for tvi4107 and other Televideo and Viewpoint # entries merged in from SCO's descriptions. # * Fixed old-style prefix padding on zen50, h1500. # * Moved old superbee entry to superbee-xsb, pulled in new superbee # entry from SCO's description. # * Reorganized the special entries. # * Added lm#0 to cbunix and virtual entries. # # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): # * Restored cdc456tst. # * Fixed sb1 entry, SCO erroneously left out the xsb glitch. # * Added megatek, beacon, microkit. # * Freeze for ncurses-1.9 release. # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): # * Added historical data for TAB. # * Comment fixes from David MacKenzie. # * Added the new BSDI pc3 entry. # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) # * A change in the tic -C logic now ensures that all entries in # the termcap translation will fit in < 1024 bytes. # * Added `bobcat' and `gator' HP consoles and the Nu machine entries # from GNU termcap file. This merges in all their local information. # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) # * Changed tic -C logic to dump all capabilities used by GNU termcap. # * Added warnings about entries with long translations (restoring # all the GNU termcaps pushes a few over the edge). # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) # * Yet another tic change, and a couple of entry tweaks, to reduce the # number of long (> 1024) termcap translations back to 0. # # 9.6.0 (Mon May 1 10:35:54 EDT 1995) # * Added kf13-kf20 to Linux entry. # * Regularize Prime terminal names. # * Historical data on Synertek. # * Freeze for ncurses-1.9.1. # 9.6.1 (Sat May 6 02:00:52 EDT 1995): # * Added true xterm-color entry, renamed djm's pseudo-color entry. # * Eliminate whitespace in short name fields, this tanks some scripts. # * Name field changes to shorten some long entries. # * Termcap translation now automatically generates empty rmir/smir # when ich1/ich is present (copes with an ancient vi bug). # * Added `screen' entries from FSF's screen-3.6.2. # * Added linux-nic and xterm-nic entries. # 9.6.2 (Sat May 6 17:00:55 EDT 1995): # * Change linux entry to use smacs=\E[11m and have an explicit acsc, # eliminating some special-case code in ncurses. # # 9.7.0 (Tue May 9 18:03:12 EDT 1995): # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think # that captures everything unique from it. # * Added reorder script generator. # * Freeze for ncurses 1.9.2 release. # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): # * Added Sean Farley's kspd, flash, rs1 capabilities for linux. # * Added Olaf Siebert's corrections for adm12. # * ansi-pc-color now includes the colors and pairs caps, so that # entries which use it will inherit them automatically. # * The linux entry can now recognize the center (keypad 5) key. # * Removed some junk that found its way into Linux acsc. # # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): # * Add 50% cut mark as a desperate hack to reduce tic's core usage. # * xterm doesn't try to use application keypad mode any more. # * Freeze for ncurses-1.9.3 release. # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): # * Added corrected sun entry from vendor. # * Added csr capability to linux entry. # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. # * Some commented-out caps in long entries come back in, my code # for computing string-table lengths had a bug in it. # * pcansi series modified to fit comm-program reality better. # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): # * BSD/OS actually ships the ibmpc3 bold entry as its console. # * Correct some bad aliases in the pcansi series # * Added entry for QNX console. # * Clean up duplicate long names for use with 4.4 library. # * Change vt100 standout to be normal reverse vide, not bright reverse; # this makes the Emacs status line look better. # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995): # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340. # * Minor surgery, mostly on name strings, to shorten termcap version. # # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995): # * Added dec-vt100 for use with the EWAN emulator. # * Added kmous to xterm for use with xterm's mouse-tracking facility. # * Freeze for 1.9.5 alpha release. # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995): # * Changed xterm lines to 24, the X11R6 default. # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995): # * Added 7 newly discovered, undocumented acsc characters to linux # entry (the pryz{|} characters). # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly. # * Correct two typos in the xterm entries introduced in 9.9.1. # * I finally figured out how to translate ko capabilities. Done. # * Added tvi921 entries from Tim Theisen. # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl. # * Removed mystery tec entry, it was neither interesting nor useful. # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f, # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a, # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211, # by making them relative to use capabilities # * Added cuf1=^L to tvi925 from deleted variant tvi925a. # * fixed cup in adm22 entry and parametrized strings in vt320-k3. # * added it#8 to entries that used to have :pt: -- tvi912, vi200, # ampex80, # * Translate all home=\E[;H capabilities to home=\E[H, they're # equivalent. # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of # vt100 and ANSI-like terminals. # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995): # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic # does this now, too. # * fviewpoint is gone, it duplicated screwpoint. # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. # The UW vi50 replaces the old one, which becomes vi50adm, # * No more embedded commas in name fields. # # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995): # * XENIX forms characters in fos, trs16, scoansi become acsc strings, # * Introduced klone+* entries for describing Intel-console behavior. # * Linux kbs is default-mapped to delete for some brain-dead reason. # * -nsl -> -ns. The -pp syntax is obsolete. # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs. # * Make xterm entry do application-keypad mode again. I got complaints # that it was messing up someone's 3270 emulator. # * Added some longname fields in order to avoid warning messages from # older tic implementations. # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use # it! (This gives us pi, greater than, less than, and a few more.) # * Freeze for ncurses-1.9.6 release. # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995): # * Add xon to a number of console entries, they're memory-mapped and # don't need padding. # * Correct the use dependencies in the ansi series. # * Hand-translate more XENIX capabilities. # * Added hpterm entry for HP's X terminal emulator. # * Added aixterm entries. # * Shortened four names so everything fits in 14 chars. # # 9.11.0 (Thu Nov 2 17:29:35 EST 1995): # * Added ibcs2 entry and info on iBCS2 standard. # * Corrected hpa/vpa in linux entry. They still fail the worm test. # * We can handle the HP meml/memu capability now. # * Added smacs to klone entries, just as documentation. # * Carrected ansi.sys and cit-500 entries. # * Added z39, vt320-k311, v220c, and avatar entries. # * Make pcansi use the ansi.sys invis capability. # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c, # tvi925, tvi950, dt80, ncr7900i, h19. # * X3.64 has been withdrawn, change some references. # * Removed function keys from ansi-m entry. # * Corrected ansi.sys entry. # * Freeze for ncurses-1.9.7 release. # 9.11.1 (Tue Nov 6 18:18:38 EST 1995): # * Added rmam/smam capabilities to many entries based on init strings. # * Added correct hpa/vpa to linux. # * Reduced several entries relative to vt52. # 9.11.2 (Tue Nov 7 00:21:06 EST 1995): # * Exiled some utterly unidentifiable custom and homebrew types to the # UFO file; also, obsolete small-screen hardware; also, entries which # look flat-out incorrect, garbled, or redundant. These include the # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. # * Corrected pcvt25h as suggested by Brian C. Grayson # . # 9.11.3 (Thu Nov 9 12:14:40 EST 1995): # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. # * Added kent=\EOM to xterm entry. # # 9.11.4 (Fri Nov 10 08:31:35 EST 1995): # * Corrected gigi entry. # * Restored cuf/cud1 to xterm, their apparent bugginess was due to # bad hpa/vpa capabilities. # * Corrected flash strings to have a uniform delay of .2 sec. No # more speed-dependent NUL-padding! # * terminfo capabilities in comments bracketed with <>. # 9.11.5 (Fri Nov 10 15:35:02 EST 1995): # * Replaced pcvt with the 3.31 pcvt entries. # * Freeze for 1.9.7a. # 9.11.6 (Mon Nov 13 10:20:24 EST 1995): # * Added emu entry from the X11R6 contrib tape sources. # # 9.12.0 (Wed Nov 29 04:22:25 EST 1995): # * Improved iris-ansi and sun entries. # * More flash string improvements. # * Corrected wy160 & wy160 as suggested by Robert Dunn # * Added dim to at386. # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says # he's ready to start using the termcap generated from this one. # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, # att610, att620, att630, # * Changed hazeltine name prefix from h to hz. # * Sent t500 to the UFI file. # * I think we've sucked all the juice out of BSDI's termcap file now. # * Freeze for ncurses 1.9.8 release # 9.12.1 (Thu Nov 30 03:14:06 EST 1995) # * Unfreeze, linux kbs needed to be fixed. # * Tim Theisen pinned down a bug in the DMD firmware. # 9.12.2 (Thu Nov 30 19:08:55 EST 1995): # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko). # (The broken ones had been shadowed by sgr.) # 9.12.3 (Thu Dec 7 17:47:22 EST 1995): # * Added documentation on ECMA-48 standard. # * New Amiga entry. # 9.12.4 (Thu Dec 14 04:16:39 EST 1995): # * More ECMA-48 stuff # * Corrected typo in minix entry, added pc-minix. # * Corrected khome/kend in xterm (thank you again, Aaron Ucko). # * Added rxvt entry. # * Added 1.3.x color-change capabilities to linux entry. # 9.12.5 (Tue Dec 19 00:22:10 EST 1995): # * Corrected rxvt entry khome/kend. # * Corrected linux color change capabilities. # * NeXT entries from Dave Wetzel. # * Cleaned up if and rf file names (all in /usr/share now). # * Changed linux op capability to avoid screwing up a background color # pair set by setterm. # 9.12.6 (Wed Feb 7 16:14:35 EST 1996): # * Added xterm-sun. # 9.12.7 (Fri Feb 9 13:27:35 EST 1996): # * Added visa50. # # 9.13.0 (Sun Mar 10 00:13:08 EST 1996): # * Another sweep through the Shuford archive looking for new info. # * Added dg100 alias to dg6053 based on a comp.terminals posting. # * Added st52 from Per Persson. # * Added eterm from the GNU Emacs 19.30 distribution. # * Freeze for 1.9.9. # 9.13.1 (Fri Mar 29 14:06:46 EST 1996): # * FreeBSD console entries from Andrew Chernov. # * Removed duplicate Atari st52 name. # 9.13.2 (Tue May 7 16:10:06 EDT 1996) # * xterm doesn't actually have ACS_BLOCK. # * Change klone+color setf/setb to simpler forms that can be # translated into termcap. # * Added xterm1. # * Removed mechanically-generated junk capabilities from cons* entries. # * Added color support to bsdos. # 9.13.3 (Thu May 9 10:35:51 EDT 1996): # * Added Wyse 520 entries from Wm. Randolph Franklin . # * Created ecma+color, linux can use it. Also added ech to linux. # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates. # * Add descriptions to FreeBSD console entries. Also shorten # some aliases to <= 14 chars for portability. # * Added x68k console # * Added OTbs to several VT-series entries. # 9.13.4 (Wed May 22 10:54:09 EDT 1996): # * screen entry update for 3.7.1 from Michael Alan Dorman. # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996): # * kterm correction due to Kenji Rikitake. # * ACS correction in vt320-kll due to Phillippe De Muyter. # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996): # * Sun console entry correction from J.T. Conklin. # * Changed all DEC VT300 and up terminals to use VT300 tab set # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): # * Added smul to linux entry (we never noticed it was missing # because of sgr!). # * Added rmln to hp+labels (deduced from other HP entries). # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3. # * Corrected vt220 acsc. # * The klone+sgr and klone+sgr-dumb entries now use klone+acs; # this corresponds to reality and helps prevent some tic warnings. # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2, # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11, # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800, # ifmr, v3220, wy100q, tandem653, ibmaed. # * Added DWK terminal description. # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996): # * Many entries now have highlights inherited from adm+sgr. # * xterm entry now corresponds to XFree86 3.1.2E, with color. # * xtitle and xtitle-twm enable access to the X status line. # * Added linux-1.3.6 color palette caps in conventional format. # * Added adm1178 terminal. # * Move fos and apollo terminals to obsolete category. # * Aha! The BRL terminals file told us what the Iris extensions mean. # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: # cit500, adm11. # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. # * Corrected, from BRL termcap file: vi50. # * Better rxvt entry & corrected xterm entries from Thomas Dickey. # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996): # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1, # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi, # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro, # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae. # * Paired-attribute fixes to various terminals. # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons. # * xterm entry corrections from Thomas Dickey. # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996): # * Added t916 entry, translated from a termcap in SCO's support area. # * New qnx entry from Michael Hunter. # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996): # * Added hpex2 from Ville Sulko. # * Fixed a bug that ran the qnx and pcvtXX together. # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996): # * Added dtterm entry from Solaris CDE. # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996): # * corrected pairs#8 typo in dtterm entry. # * added tvi9065. # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): # * updated xterm entry to cover 3.1.2E's new features. # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): # * Added new minix entry # * Removed aliases of the form ^[0-9]* for obsolete terminals. # * Commented out linux-old, nobody's using pre-1.2 kernels now. # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996): # * Added Prism entries and kt7ix. # * Caution notes about EWAN and tabset files. # * Changed /usr/lib/tabset -> /usr/share/tabset. # * Added acsc/rmacs/smacs to vt52. # 9.13.18 (Mon Oct 28 13:24:59 EST 1996): # * Merged in Thomas Dickey's reorganization of the xterm entries; # added technical corrections to avoid warning messages. # 9.13.19 (Sat Nov 16 16:05:49 EST 1996): # * Added rmso=\E[27m in Linux entry. # * Added koi8-r support for Linux console. # * Replace xterm entries with canonical ones from XFree86 3.2. # 9.13.20 (Sun Nov 17 23:02:51 EST 1996): # * Added color_xterm from Jacob Mandelson # 9.13.21 (Mon Nov 18 12:43:42 EST 1996): # * Back off the xterm entry to use r6 as a base. # 9.13.22 (Sat Nov 30 11:51:31 EST 1996): # * Added dec-vt220 at Adrian Garside's request. # #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)--------------------------- # # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn # * Minor corrections to xterm entries. # * Replaced EWAN telnet entry. # * Dropped the reorder script generator. It was a fossil. # 9.13.23 (Fri Feb 21 16:36:06 EST 1997): # * Replaced minitel-2 entry. # * Added MGR, ansi-nt. # 9.13.24 (Sun Feb 23 20:55:23 EST 1997): # * Thorsten Lockert added termcap `bs' to a lot of types, working from # the 4.4BSD Lite2 file. # # 10.1.1 (Sat May 3 21:41:27 EDT 1997): # * Use setaf/setab consistently with SVr4. # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5 # 10.1.2 (Sat May 24 21:10:57 EDT 1997) # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4) # * add xterm-16color, for XFree86 3.3 # 10.1.3 (Sat May 31 12:21:05 EDT 1997) # * correct typo in emu # * correct typo in vt102-w (Robert Wuest) # * make new entry xterm-xf86-v33, restored xterm-xf86-v32. # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997) # * remove ech capability from rxvt (it does the wrong thing) # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997) # * remove spurious newlines from several entries (hp+color, wy50, # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm, # gs6300) # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997) # * correct rmso capability of wy50-mc # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997) # * add cbt to xterm-xf86-v32 # * disentangle some entries from 'xterm', preferring xterm-r6 in case # 'xterm' is derived from xterm-xf86-v32, which implements ech and # other capabilities not in xterm-r6. # * remove alternate character set from kterm entry. # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997) # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'. # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997) # * add xterm-8bit entry. # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997) # * repair several places where early version of tic replaced \, with \\\, # * make acsc entries canonical form (sorted, uniq). # * modify acsc entries for linux, linux-koi8 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b # * add color, mouse support to kterm. # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997) # * correct wy120 smxon/tbc capabilities which were stuck together. # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997) # * add entry for xterm-xf86-v39t # 10.1.13 (Sat Nov 8 13:43:33 EST 1997) # * add u8,u9 to sun-il description # 10.1.14 (Sat Nov 22 19:59:03 EST 1997) # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97 # version. # * add hds200 description (Walter Skorski) # * add EMX 0.9b descriptions # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver) # * rename xhpterm back to hpterm. # 10.1.15 (Sat Nov 29 19:21:59 EST 1997) # * change initc in linux-c-nc to use 0..1000 range. # 10.1.16 (Sat Dec 13 19:41:59 EST 1997) # * remove hpa/vpa from rxvt, which implements them incorrectly. # * add sgr0 for rxvt. # * remove bogus smacs/rmacs from EMX descriptions. # 10.1.17 (Sat Dec 20 17:54:10 EST 1997) # * revised entry for att7300 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998) # * use \0 rather than \200. # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution. # 10.1.19 (Sat Jan 17 14:24:57 EST 1998) # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset. # * rename xterm-xf86-v39t to xterm-xf86-v40 # * remove bold/underline from sun console entries since they're not # implemented. # 10.1.20 (Sat Jan 24 11:02:51 EST 1998) # * add beterm entry (Fred Fish) # * add irix-color/xwsh entry. # * turn ncv off for linux. # 10.1.21 (Sat Jan 31 17:39:16 EST 1998) # * set ncv for FreeBSD console (treat colors with reverse specially). # * remove sgr string from qnx based on report by Xiaodan Tang # 10.1.22 (Wed Feb 11 18:40:12 EST 1998) # * remove spurious commas from descriptions # * correct xterm-8bit to match XFree86 3.9Ad F1-F4. # 10.1.23 (Sat Feb 28 17:48:38 EST 1998) # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, # apparently based on cp-866). # #-(replaced-changelog-1998/02/28-by-ESR)---------------------------------------- # # 9.13.23 (Fri Feb 21 16:36:06 EST 1997): # * Replaced minitel-2 entry. # * Added MGR, ansi-nt. # * Minor corrections to xterm entries. # * Replaced EWAN telnet entry. # * Dropped the reorder script generator. It was a fossil. # 9.13.24 (Sun Feb 23 20:55:23 EST 1997): # * Thorsten Lockert added termcap `bs' to a lot of types, working from # the 4.4BSD Lite2 file. # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997): # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js. # * Updated iris-ansi; corrected vt102-w. # * Switch base xterm entry to 3.3 level. # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997) # * Added basic4. # * Removed rmir/smir from tv92B. # # 10.2.0 (Sat Feb 28 12:47:36 EST 1998): # * add hds200 description (Walter Skorski) # * add beterm entry (Fred Fish) # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color, # iris-color entries. # * add emx entries. # * Replaced unixpc entry with Benjamin Sittler's corrected version. # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's # versions. # * remove sgr string from qnx based on report by Xiaodan Tang # * Added u8/u9, removed rmul/smul from sun-il. # * 4.2 tic displays \0 rather than \200. # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, # apparently based on cp-866). # * Merged in Pavel Roskin's acsc for linux-koi8 # * Corrected some erroneous \\'s to \. # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV. # * II -> ii in pcvtXX, screen, xterm. # * Removed \n chars following ANSI escapes in sgr & friends. # * Updated Wyse entries. # * h19 corrections from Tim Pierce. # * Noted that the dm2500 has both ich and smir. # * added pccons for the Alpha under OSF/1. # * Added Sony NEWS workstation entries and cit101e-rv. # * Reverted `amiga'; to Kent Polk's version, as I'm told # the Verkuil entry messes up with Amiga Telnet. # 10.2.1 (Sun Mar 8 18:32:04 EST 1998): # * Corrected attributions in 10.2.0 release notes. # * Scanned the Shuford archive for new terminfos and information. # * Removed sgr from qnx entry (Thomas Dickey). # * Added entries for ICL and Kokusai Data Systems terminals. # * Incorporated NCR terminfos from the Boundless Technology FTP site. # * Incorporated att700 from the Boundless Technology FTP site. # * Miscellaneous contact-address and Web-page updates. # #-(changelog-beginning-ncurses-4.2)--------------------------------------------- # # 1998/5/9 # * add nxterm and xterm-color terminfo description (request by Cristian # Gafton ). # * modify rxvt terminfo description to clear alternate screen before # switching back to normal screen, for compatibility with applications # which use xterm (reported by Manoj Kasichainula ). # * modify linux terminfo description to reset color palette (reported # by Telford Tendys ). # # 1998/7/4 # * merge changes from current XFree86 xterm terminfo descriptions. # # 1998/7/25 # * Added minitel1 entries from Alexander Montaron. # * Added qnxt2 from Federico Bianchi. # * Added arm100 terminfo entries from Dave Millen. # # 1998/8/6 # * Added ncsa telnet entries from Francesco Potorti # # 1998/8/15 # * modify ncsa telnet entry to reflect color, other capabilities based on # examination of the source code - T.Dickey. # # 1998/8/22 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD. # # 1998/8/29 # * Added Francesco Potorti's tuned Wyse 99 entries. # * dtterm enacs correction from Alexander V. Lukyanov. # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version. # * correct a typo in icl6404 entry. # * add xtermm and xtermc # # 1998/9/26 # * format most %'char' sequences to %{number} # * adapt IBM AIX 3.2.5 terminfo - T.Dickey # * merge Data General terminfo from Hasufin - TD # # 1998/10/10 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD # * correct initialization string in xterm-r5, add misc other features # to correspond with xterm patch 84 - TD # # 1998/12/19 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD # * add Mathew Vernon's mach console entries # * corrections for ncsa function-keys (report by Larry Virden) # # 1998/12/19 # * change linux to use ncv#2, since underline does not work with color - TD # # 1999/1/9 # * add kbt to iris-ansi, document other shift/control functionkeys - TD # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad # application modes, change kent to use the correct keypad code - TD # # 1999/1/10 # * add entry for Tera Term - TD # # 1999/1/23 # * minor improvements for teraterm entry - TD # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold, # and bsdos-bold to bsdos-pc (Jeffrey C Honig) # # 1999/2/20 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in # xterm and ncsa entries by removing the unneeded ones. Note that # some entries will return kend & khome versus kslt and kfnd, for # PC-style keyboards versus strict vt220 compatiblity - TD # # 1999/3/13 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard # tables - TD # * add 'crt' entry - TD # * correct typos in 'linux-c' entry - TD # # 1999/3/14 # * update entries for BSD/OS console to use klone+sgr and klone+color # (Jeffrey C Honig) # # 1999/3/27 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD. # # 1999/4/10 # * add linux-lat, from RedHat patches to ncurses 4.2 # # 1999/4/17 # * add complete set of default function-key definitions for scoansi - TD. # # 1999/7/3 # * add cnorm, cvvis for Linux 2.2 kernels # # 1999/7/24 # * add kmous to xterm-r5 -TD # * correct entries xterm+sl and xterm+sl-twm, which were missing the # parent "use" clause -TD # # 1999/7/31 # * corrected cnorm, added el1 in 'screen' description -TD # # 1999/8/14 # * add ms-vt100 -TD # # 1999/8/21 # * corrections to beterm entry -TD # # 1999/8/28 # * add cygwin entry -TD # # 1999/9/4 # * minor corrections for beterm entry -TD # # 1999/9/18 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch # # 1999/9/25 # * add amiga-8bit entry # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons, # rcons-color, based on # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src # * add alias for iris-ansi-net # # 1999/10/2 # * corrected scoansi entry's acsc, some function keys, add color -TD # # 1999/10/23 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD # * reorder ncsa entries to make ncsa-vt220 use the alternate function # key mapping, leaving Potorti's entries more like he named them -TD # * remove enter/exit am-mode from cygwin -TD # # 1999/10/30 # * correct typos in several entries (missing '[' from CSI): # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir # strings for avt-ns -TD # * add 'dim' to ncv mask for linux (report by Klaus Weide). # # 1999/11/27 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD # * add xterm-88color and xterm-256color -TD # # 1999/12/4 # * add "obsolete" termcap strings -TD # * add kvt and gnome entries -TD # # 1999/12/11 # * correct cup string for regent100 -TD # # 2000/1/1 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD # * change OTrs capabilities to rs2 -TD # * add obsolete and extended capabilities to 'screen' -TD # # 2000/1/5 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts # with kf10 -TD # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', # and adding kcbt -TD # # 2000/1/12 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on # nonstandard resource settings -TD # # 2000/2/26 # * minor fixes for xterm-*, based on Debian #58530 -TD # # 2000/3/4 # * add several terminal types from esr's "11.0", as well as comments. # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, # vt220-8bit, vt220-old, wy85-8bit # # 2000/3/18 # * add several terminal types from esr's "11.0.1" (ansi-*). # * update OTxx capabilities for changes on 2000/3/4. # * revert part of vt220 change (request by Todd C Miller for OpenBSD) # # 2000/3/26 # * move screen's AX extension to ecma+color, modify several entries to # use that, adjusting ncv as needed -TD # # 2000/4/8 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig) # * correct spelling error in entry name: bq300-rv was given as bg300-rv # in esr's version. # # 2000/4/15 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD # * correct color definition for ibm3164, make minor changes to other # IBM terminal definitions based on recent terminfo descriptions -TD # # 2000/4/22 # * add mgterm, from NetBSD -TD # * add alias sun-cgsix for sun-ss5 as per NetBSD # * change cons25w to use rs2 for reset rather than rs1 -TD # * add rc/sc to aixterm based on manpage -TD # # 2000/5/13 # * remove ncv from xterm-16color, xterm-256color # # 2000/6/10 # * add kmous capability to linux to use Joerg Schoen's gpm patch. # # 2000/7/1 # * add Eterm (Michael Jennings) # # 2000-07-18 # * add amiga-vnc entry. # # 2000-08-12 # * correct description of Top Gun Telnet. # * add kterm-color # # 2000-08-26 # * add qansi* entries from QNX ftp site. # # 2000-09-16 # * add Matrix Orbital entries by Eric Z. Ayers). # * add xterm-basic, xterm-sco entries, update related entries to XFree86 # 4.0.1c -TD # # 2000-09-17 # * add S0, E0 extensions to screen's entry -TD # # 2000-09-23 # * several corrections based on tic's new parameter-checking code -TD # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8 # bracketing sequences that reset video attributes (\E8 would restore # them) -TD # # 2000-11-11 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD # # 2000-12-16 # * improved scoansi, based on SCO man-page, and testing console, # scoterm with tack -TD # # 2001-01-27 # * modify kterm to use acsc via SCS controls. # # 2001-02-10 # * screen 3.9.8 allows xterm mouse controls to pass-through # # 2001-03-11 # * remove spurious "%|" from some xterm entries. # # 2001-03-31 # * modify 'screen' khome/kend to match screen 3.09.08 # * add examples of 'screen' customization (screen.xterm-xfree86, # screen.xterm-r6, screen.teraterm) -TD # # 2001-04-14 # * correct definitions of shifted editing keys for xterm-xfree86 -TD # * add "Apple_Terminal" entries -Benjamin Sittler # * remove time-delays from "Apple_Terminal" entries -TD # * make sgr entries time-delays consistent with individual caps -TD # # 2001-05-05 # * corrected/updated screen.xterm-xfree86 # # 2001-05-19 # * ELKS descriptions, from Federico Bianchi # * add u6 (CSR) to Eterm (Michael Jennings). # # 2001-07-21 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's # tic which handles names no longer than 14 characters. Add # corresponding descriptions for the Darwin PowerPC console named # "xnuppc" -Benjamin Sittler # # 2001-09-01 # * change kbs in mach entries to ^? (Marcus Brinkmann). # # 2001-11-17 # * add "putty" entry -TD # * updated "Apple_Terminal" entries -Benjamin Sittler # # 2001-11-24 # * add ms-vt100-color entry -TD # * add "konsole" entries -TD # # 2001-12-08 # * update gnome entry to Redhat 7.2 -TD # # 2002-05-25 # * add kf13-kf48 strings to cons25w -TD # * add pcvt25-color entry -TD # * changed a few /usr/lib/tabset -> /usr/share/tabset. # * improve some features of scoansi entry based on SCO's version -TD # * add scoansi-new entry corresponding to OpenServer 5.0.6 # # 2002-06-15 # * add kcbt to screen entry -TD # # 2002-06-22 # * add rxvt-16color, ibm+16color, mvterm entries -TD # # 2002-09-28 # * split out linux-basic entry, making linux-c inherit from that, and # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect # the history of this console type -TD # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the # r/g/b parameters of initc are in the range 0 to 1000 -TD # # 2002-10-05 # * minor fix for scale-factor of linux-c and linux-c-nc -TD # # 2002-11-09 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2 # in the latter -TD # # 2002-11-16 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD # * ncr260wy350pp has only 16 color pairs -TD # * add sun-type4 from NetBSD -TD # * update xterm-xfree86 to current (patch 170) -TD # * add screen-bce, screen-s entries -TD # * add xterm-1002, xterm-1003 entries -TD # # 2003-01-11 # * update homepage for Top Gun Telnet/SSH # # 2003-01-25 # * reduce duplication in emx entries, added emx-base -TD # # 2003-05-24 # * corrected acs for screen.teraterm -TD # * add tkterm entry -TD # # 2003-07-15 # * cygwin changes from Charles Wilson: # misc/terminfo.src (nxterm|xterm-color): make xterm-color # primary instead of nxterm, to match XFree86's xterm.terminfo # usage and to prevent circular links. # (rxvt): add additional codes from rxvt.org. # (rxvt-color): new alias # (rxvt-xpm): new alias # (rxvt-cygwin): like rxvt, but with special acsc codes. # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or # with a "native" MSWin GUI. Each takes different acsc codes, # which are both different from the "normal" rxvt's acsc. # (cygwin): cygwin-in-cmd.exe window. Lots of fixes. # (cygwinDBG): ditto. # # 2003-09-27 # * update gnome terminal entries -TD # # 2003-10-04 # * add entries for djgpp 2.03 and 2.04 -TD # # 2003-10-25 # * add alias for vtnt -TD # * update xterm-xfree86 for XFree86 4.4 -TD # # 2003-11-22 # * add linux-vt (Andrey V Lukyanov) # # 2003-12-20 # * add screen.linux -TD # # 2004-01-10 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler) # # 2004-01-17 # * add OpenNT/Interix/SFU entries (Federico Bianchi) # * add vt100+ and vt-utf8 entries -TD # * add uwin entry -TD # # 2004-03-27 # * add sgr strings to several common entries lacking them, e.g., # screen, to make the entries more portable -TD # * remove cvvis from rxvt entry, since it is the same as cnorm -TD # * similar fixups for cvvis/cnorm various entries -TD # # 2004-05-22 # * remove 'ncv' from xterm-256color (patch 188) -TD # # 2004-06-26 # * add mlterm -TD # * add xterm-xf86-v44 -TD # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies # on G1 being used via an ISO-2022 escape sequence (report by # Juliusz Chroboczek) -TD # * add 'hurd' entry -TD # # 2004-07-03 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than # xterm-basic -TD # * align with xterm #192's use of xterm-new -TD # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD # * make xterm-new the default "xterm" -TD # # 2004-07-10 # * minor fixes for emu -TD # * add emu-220 # * add rmam/smam to linux (Trevor Van Bremen) # * change wyse acsc strings to use 'i' map rather than 'I' -TD # * fixes for avatar0 -TD # * fixes for vp3a+ -TD # # 2004-07-17 # * add xterm-pc-fkeys -TD # * review/update gnome and gnome-rh90 entries (prompted by # Redhat Bugzilla #122815) -TD # * review/update konsole entries -TD # * add sgr, correct sgr0 for kterm and mlterm -TD # * correct tsl string in kterm -TD # # 2004-07-24 # * make ncsa-m rmacs/smacs consistent with sgr -TD # * add sgr, rc/sc and ech to syscons entries -TD # * add function-keys to decansi -TD # * add sgr to mterm-ansi -TD # * add sgr, civis, cnorm to emu -TD # * correct/simplify cup in addrinfo -TD # * corrections for gnome and konsole entries # (Redhat Bugzilla #122815) -Hans de Goede # * modify DEC entries (vt220, etc), to add sgr string, and to use # ISO-2022 strings for rmacs/smacs -TD # # 2004-07-31 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD # # 2004-08-07 # * improved putty entry -Robert de Bath # # 2004-08-14 # * remove dch/dch1 from rxvt because they are implemented inconsistently # with the common usage of bce/ech -TD # * remove khome from vt220 (vt220's have no home key) -TD # * add rxvt+pcfkeys -TD # # 2004-08-21 # * modify several entries to ensure xterm mouse and cursor visibility # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm, # Eterm, screen. (The xterm entries are left alone - old ones for # compatibility, and the new ones do not require this change) -TD # # 2004-08-28 # * add morphos entry -Pavel Fedin # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin # * corrected \E[5?l to \E[?5l in vt320 entries -TD # # 2004-11-20 # * update wsvt25 entry -TD # # 2005-01-29 # * update pairs for xterm-88color and xterm-256color to reflect the # ncurses extended-color support -TD # # 2005-02-26 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD # * add aixterm-16color to demonstrate 16-color capability -TD # # 2005-04-23 # * add media-copy to vt100 -TD # * corrected acsc string for vt52 -TD # # 2005-04-30 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for # xterm-new -TD # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD # # 2005-05-07 # * re-corrected acsc string for vt52 -TD # # 2005-05-28 # * corrected sun-il sgr string which referred to bold and underline -TD # * add sun-color entry -TD # # 2005-07-23 # * modify sgr0 in several entries to reset alternate-charset as in the # sgr string -TD # * modify sgr string of prism9 to better match the individual # attributes -TD # # 2005-10-15 # * correct order of use= in rxvt-basic -TD # # 2005-10-26 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD # # 2005-11-12 # * other minor fixes to cygwin based on tack -TD # * correct smacs in cygwin (report by Baurzhan Ismagulov). # # 2006-02-18 # * add nsterm-16color entry -TD # * remove ncv flag from xterm-16color -TD # * remove setf/setb from xterm-256color to match xterm #209 -TD # * update mlterm entry to 2.9.2 -TD # # 2006-02-25 # * fixes to make nsterm-16color match report # by Christian Ebert -Alain Bench # # 2006-04-22 # * add xterm+256color building block -TD # * add gnome-256color, putty-256color, rxvt-256color -TD # # 2006-05-06 # * add hpterm-color -TD # # 2006-06-24 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD # * add gnome-fc5 (prompted by GenToo #122566) -TD # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench # * improve xterm-256color by combining the ibm+16color setaf/setab # strings with SGR 48. The setf/setb strings also are cancelled here # rather than omitted so derived entries will cancel those also -Alain # Bench # # 2006-07-01 # * add some notes regarding copyright to terminfo.src -TD # * use rxvt+pcfkeys in Eterm -TD # * remove km and flash from gnome, Eterm and rxvt since they do not work # as one would expect (km sends ESC rather than setting the 8th bit # of the key) -TD # * add/use ansi+enq, vt100+enq and vt102+enq -TD # * add konsole-solaris -TD # # 2006-07-22 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD # * modify xterm-24 to inherit from "xterm" -TD # * add xiterm entry -TD # * add putty-vt100 entry -TD # * corrected spelling of Michael A Dorman's name, prompted by # http://www.advogato.org/person/mdorman/diary.html -TD # # 2006-08-05 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD # * update xterm+pcfkeys to match xterm #216 -TD # # 2006-08-17 # * make descriptions of xterm entries consistent with its terminfo -TD # # 2006-08-26 # * add xfce, mgt -TD # # 2006-09-02 # * correct acsc string in kterm -TD # # 2006-09-09 # * add kon entry -TD # * remove invis from linux and related entries, add klone+sgr8 for those # that implement the feature (or have not been shown to lack it) -TD # # 2006-09-23 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD # * minor improvements to rxvt+pcfkeys -TD # # 2006-09-30 # * fix a few typos in if/then/else expressions -TD # # 2006-10-07 # * add several GNU Screen variations with 16- and 256-colors, and # status line (Alain Bench). # # 2007-03-03 # * add Newbury Data entries (Jean-Charles Billaud). # # 2007-06-10 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD # # 2007-07-14 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD # * add konsole-256color entry -TD # # 2007-08-18 # * add 9term entry (request by Juhapekka Tolvanen) -TD # # 2007-10-13 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD # * add shift-control- and control-modified keys for rxvt editing # keypad -TD # * update mlterm entry to 2.9.3 -TD # * add mlterm+pcfkeys -TD # # 2007-10-20 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to # xterm+pcc0, etc., to make the corresponding building blocks reflect # xterm's capabilities -TD # * add mrxvt entry -TD # * add xterm+r6f2, use in mlterm and mrxvt entries -TD # # 2007-11-03 # * correct acsc strings for h19 and z100 (Benjamin Sittler) # # 2007-11-11 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to # xterm starting with patch #216 -TD # * make legacy xterm entries such as xterm-24 inherit from xterm-old, # to match xterm #230 -TD # * extend xterm+pccX entries to match xterm #230 -TD # * add xterm+app, xterm+noapp, from xterm #230 -TD # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD # # 2008-04-19 # * add screen.rxvt -TD # # 2008-04-28 # * add screen+fkeys (prompted by Debian #478094) -TD # # 2008-06-28 # * add screen.mlterm -TD # * improve mlterm and mlterm+pcfkeys -TD # # 2008-08-23 # * add Eterm-256color, Eterm-88color -TD # * add rxvt-88color -TD # # 2008-10-12 # * add teraterm4.59 entry, use that as primary teraterm entry, rename # original to teraterm2.3 -TD # * update "gnome" to 2.22.3 -TD # * update "konsole" to 1.6.6 -TD # * add "aterm" -TD # * add "linux2.6.26" -TD # # 2008-11-15 # * change several \E[2g (clear tab at current column) to \E[3g # (clear all tabs) to match definition for tbc capability -TD # # 2008-11-29 # * add eterm-color -TD # # 2009-01-10 # * add screen.Eterm -TD # # 2009-03-28 # * correct typo in pfkey of ansi.sys-old # (report by Kalle Olavi Niemitalo) # * move function- and cursor-keys from emx-base to ansi.sys, and create # a pfkey capability which handles F1-F48 -TD # # 2009-05-02 # * add vwmterm entry (Bryan Christ) # # 2009-09-19 # * change ncv and op capabilities in sun-color to match Sun's entry for # this (report by Laszlo Peter) # * improve interix smso by using reverse rather than bold (report by # Kristof Zelechovski). # # 2009-10-03 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim) # * add linux-16color (Benjamin Sittler) # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler) # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler) # * add ccc and initc capabilities to xterm-16color -TD # # 2009-10-31 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201) # # 2009-12-12 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta) # # 2009-12-12 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler) # * rename minix to minix-1.7, add minix entry for Minux3 -TD # # 2009-12-26 # * add bterm (bogl 0.1.18) -TD # * minor fix to rxvt+pcfkeys -TD # # 2010-02-06 # * update mrxvt to 0.5.4, add mrxvt-256color -TD # # 2010-02-13 # * add several screen-bce.XXX entries -TD # # 2010-02-23 # * modify screen-bce.XXX entries to exclude ech, since screen's color # model does not clear with color for that feature -TD # # 2010-03-20 # * rename atari and st52 to atari-old, st52-old, use newer entries from # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane). # # 2010-06-12 # * add mlterm+256color entry -TD # # 2010-07-17 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends # the alternate character set (patch by Nicholas Marriott) # # 2010-08-28 # * improve acsc for vt52 (Benjamin Sittler) # * modify nsterm entries for consistent sgr/sgr0 -TD # * modify xnuppc entries for consistent sgr/sgr0 -TD # * add invis to tek4115 sgr -TD # # 2010-09-11 # * reformat acsc strings to canonical format -TD # # 2010-09-25 # * add "XT" capability to entries for terminals that support both # xterm-style mouse- and title-controls, for "screen" which # special-cases TERM beginning with "xterm" or "rxvt" -TD # # 2010-10-02 # * fill in no-parameter forms of cursor-movement where a parameterized # form is available -TD # * fill in missing cursor controls where the form of the controls is # ANSI -TD # * add parameterized cursor-controls to linux-basic (report by Dae) -TD # # 2010-10-09 # * correct comparison used for setting 16-colors in linux-16color # entry (Novell #644831) -TD # * improve linux-16color entry, using "dim" for color-8 which makes it # gray rather than black like color-0 -TD # # 2010-11-20 # * make "vte" the principal entry defining "gnome", since GNOME terminal # is merely one of several terminals whose behavior is provided by this # library -TD # # 2010-11-27 # * fix typo in rmso for tek4106 -Goran Weinholt # # 2010-12-11 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno # * also suppress ncv in konsole-base -TD # # 2011-02-05 # * add U8 feature to denote entries for terminal emulators which do not # support VT100 SI/SO when processing UTF-8 encoding -TD # * add xterm-utf8 as a demo of the U8 feature -TD # # 2011-02-20 # * add cons25-debian entry (Brian M Carlson, Debian #607662). # # 2011-06-11 # * update minix entry to minix 3.2 (Thomas Cort). # # 2011-07-09 # * fix inconsistent tabset path in pcmw (Todd C. Miller). # * remove a backslash which continued comment, obscuring altos3 # definition with OpenBSD toolset (Nicholas Marriott). # # 2011-07-16 # * add/use xterm+tmux chunk from xterm #271 -TD # * resync xterm-new entry from xterm #271 -TD # * add E3 extended capability to linux-basic (Miroslav Lichvar) # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD # * add SI/SO change to linux2.6 entry (Debian #515609) -TD # # 2011-07-21 # * add kich1 to sun (Yuri Pankov) # * use bold rather than reverse for smso in sun-color (Yuri Pankov). # # 2011-08-06 # * corrected k9 in dg460-ansi, add other features based on manuals -TD # # 2011-08-20 # * minor cleanup of X-terminal emulator section -TD # * add terminator entry -TD # * add simpleterm entry -TD # # 2011-09-10 # * add xterm+kbs fragment from xterm #272 -TD # # 2011-11-12 # * add pccon entries for OpenBSD console (Alexei Malinin) # # 2011-12-17 # * corrected old changelog comments -TD # # 2011-11-24 # * add putty-sco -TD # # 2012-01-28 # * add mach-gnu (Samuel Thibault) # * add mach-gnu-color, tweaks to mach-gnu -TD # * make sgr for sun-color agree with smso -TD # * make sgr for prism9 agree with other caps -TD # * make sgr for icl6404 agree with other caps -TD # * make sgr for ofcons agree with other caps -TD # * make sgr for att5410v1, att4415, att620 agree with other caps -TD # * make sgr for aaa-unk, aaa-rv agree with other caps -TD # * make sgr for avt-ns agree with other caps -TD # # 2012-02-11 # * make sgr for xterm-pcolor agree with other caps -TD # * make sgr for att5425 agree with other caps -TD # * make sgr for att630 agree with other caps -TD # * make sgr for linux entries agree with other caps -TD # * make sgr for tvi9065 agree with other caps -TD # * make sgr for ncr260vt200an agree with other caps -TD # * make sgr for ncr160vt100pp agree with other caps -TD # * make sgr for ncr260vt300an agree with other caps -TD # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD # * make sgr for cygwin, cygwinDBG agree with other caps -TD # # 2012-03-31 # * correct order of use-clauses in st-256color -TD # ######## SHANTIH! SHANTIH! SHANTIH!